DB Adapter configuration with Informix DB

Hello everyone,
I have setup a Informix datasource on Weblogic 10.3.6 by selecting weblogic's informix XA driver. I've a BPEL which invokes DB adapter with a pure SQL query (a little complicated query). But its throwing following exception while testing:
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getDetailsFromDB' failed due to: DBWriteInteractionSpec Execute Failed Exception.
unknown failed. Descriptor name: [unknown].
Caused by java.sql.SQLException: Cannot call Connection.commit in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed..
Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke".
I've also made sure to have platformClassName as 'org.eclipse.persistence.platform.database.InformixPlatform' under the settings for javax.resource.cci.ConnectionFactory in DbAdapter under deployments.
Can anyone throw some light as to what is going wrong here?
Thanks
Jahangir

Actually, it was my mistake. I created XA data source but i provided the name in non XA data source field in the JNDI.
Thanks
Jahangir

Similar Messages

Doubt in oracle AS adapter configuration with siebel

Hi,
I want to configure oracle AS adapter with siebel... i followed follwing steps for that...
1) installed Oracle 10g
2)installed oracle 10g oracleasinfra(10.1.2.0.2)
3) installed oracle 10g oracleasmidtier(10.1.2.0.2)
4) installed oracle AS adpter(10.1.2.0.2)
Now i need to download files for siebel... i dont have access to metalink so i went edelivery.oracle.com website
i found there Siebel business application media pack(7.8.2)... there are 6 parts in that... i assume i need to download all the 6 parts aslo with the english language extension pack( also 4 parts)...
Then what should be done...
Remember i need to configure it with Oracle AS adapter (10.2.0.1.2)
Please help me out..
Thanx in advance...

Hi,
You need to copy some jar files too. Have you done that.??

JDBC Sender/Receiver Adapter Configuration with key fields in SAP XI

Hi All,
Good evening.
Please let me know, what are the settings required for key fields when configuring both sender and receiver Adapter?
In My IDOC-XI-File Scenario, when i am sending an IDOC from R/3, I got Mapping Runtime exception error? So, How to send the same IDOC after correcting the error?
Thanks to all in advance.
Regards,
Nagarjuna.

HI Nagarjuna,
If my understanding is correct, When you trigger the Idoc from R/3 it thrown the error in XI.
If you want to send the same Idoc then go to WE19 in R/3 system enter the same Idoc number and execute the scenaio. It send the Idoc to XI system, but the message number will change.
Regards
Goli Sridhar

Sender Mail adapter configuration with attachment

Hi,
I read the below blog regarding the mail adapter
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
I have the same requirement but the attachment file is not an XML, it is CSV file so in the module tab if I change like below is it enough?
TRANSFORM swap.keyValue attachment; filename=u201DMailAttachment-1.csvu201D (I think MailAttachment-1 is the file name, am I correct?)
If I change like above is it ok? or any other thing is required, Could you please give me the inputs
Thanks
Ramesh

I have the same requirement but the attachment file is not an XML, it is CSV file so in the module tab if I change like below is
it enough?
PayloadSwapBean will ensure that the input to the mapping is from the attachment.....in the blog the attachment is in XML format and hence there was no need for any conversion.....yours is however a CSV file so you need to convert it to XML first and then do the further processing.....you can either use the MessageTransformationBean as shown in this blog:
/people/gabrielsagayaselvam.panneerselvam/blog/2009/08/31/solve-key-field-problem-using-structplain2xml-in-messagetransformationbean
Or write your own module code for the conversion.
Regards,
Abhishek.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

File adapter configuration parameter for "hexadecimal conversion"

(File adapter for XI 2.0)
Does anybody know the exact File adapter configuration parameters for reading a file with hexadecimal control characters as seperators. My file has
3 types of seperators - i.e "2F", "05" & "0D2F"
Eg: xml.fieldSeparator= "2F"
When I specify this the file is getting split into fields
at all the seperators in the file. I guess I am not using the right format in my defination ?
Dorai

Is there any special format for reading a file containing hexadecimal control characters?
The file to be processed has hexadecimal separators:
Field Delimiter : '09' or '05'
End of record delimiter: '0A' or '25'
End of Table delimiter : '07' or '2F'
Initially i would like to read the file into XI as it is i.e without any split by using "xml.fieldFixedLengths= "
However, everytime I process the file(with hexadecimal contol characters), I have noticed that my file is getting split, even when I did not specify anything for field separator(i.e when i used fixed field length).
Thanks,
Dorai

File name naming convention in File Adapter configuration in ID

Hi All ,
I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
The scenario is like this :
I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
Naming convention should be
<storename>_date_masterdataname.xmlwhere store name is one of field of IDOC .
Plz help me .
Thanks in Advance
Regards
Prabhat Ranjan

Hi Prabhat,
take a look at this weblog:
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
you have to specify variable substitution
(in the file adapter)
and give the path to the store name (in the variable sustitution table)
you file name schema (from the file communication channel can look like this)
%storename%_date_masterdataname.xml
Regards,
michal
Message was edited by: Michal Krawczyk

Using adapter specific message attributes in SOAP adapter configuration

Hi,
Can you please let me know how to use adapter specific message attributes in receiver and sender SOAP adapter configuration. If possible , with example.

See here:
Adapter-Specific Message Attributes in the Message Header
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/frameset.htm
Sender Soap Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
Receiver Soap Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm

Sender Mail Adapter Configuration error

Hi,
I am working on scenario mail adapter to CRM system. And when I tried to configure the sender email adapter I have got the error following error, Can any one help me to resolve this issues
error occured: exception caught during processing mail message; java.net.ConnectException: Connection refused
the details I have provided are as follows
Transport protocol is POP3
URL - POP://mailservername/Inbox/folder
And I have tried with the IMAP4 also
URL - IMAP://mailservername/Inbox/folder
And we have cross checked that the XI server is able to ping that particular mail server.
Regards,
Venkat.

Hi Venkateswara,
I would suggest that you go through these to know how to configure your sender mail adapter,
<a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step mail adapter step by step</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure adapter Scenario</a>
Also, to know the various parameters of a sender mail adapter, just go through this link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">Configuring sender mail adapter</a>
Check your mail adapter configuration against these details. Also, check if the mail server you are trying to access is running.
Also go thru this pdf to make yourself more comfortable with mail adapters.
https://websmp205.sap-ag.de/~sapidb/011000358700004556712005E/HowTo_Mail_Adapter2.pdf
Regards,
abhy

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

Mail Adapter Configuration in XI 3.0

Hi all,
i tried to set up a process using the mail adapter. Unfortunately it doesn't work. Has anyone succeeded in setting up a process with the mail adapter using POP3 and SMTP?

Hi Michael,
I did not find any documentation of the XI 3.0 mail adapter so result of practical test only for outgoing mail using SMTP:
Mail server settings:
SMTP port 8025 (you can configure any port of course)
Account demo, password test
Mail adapter configuration:
Bubble adapter java class
classname=com.sap.aii.messaging.adapter.ModuleBubble
Bubble.Helper=com.sap.aii.messaging.adapter.ModuleBubbleHelperXIMailImpl
Part 0 : common part ######
Mail.MailSubject="mail from adapter z_outmail"
Mail.MailFrom=[email protected]
Mail.MailTo=demo@<you mail server name>
XIALL or XIPAYLOAD
Mail.MessageProtocol=XIPAYLOAD
Mail.Log=1110
Part : XI client to Mail server ######
OMail.TargetURL=smtp://<you mail server name>:8025
OMail.User=demo
OMail.Password=test
The port and path where the adapter waits for XMB messages from clients.
XI.Port=8240
XI.Path=/z_outmail
It look so that there is no POP3 support, just only IMAP.
Jiri

Receiver mail adapter configuration for e-mail attachments

Hi ,
I need to send two files from sender file adapter to receiver mail adapter as e mail attachment.
I want same attachment name in email as on sender side on FTP location.
This is by pass scenario no object created in ESR.Please suggest how to handle this.
For example if file name test.txt is send by file adapter then on mail attachment name should be test.txt
Thanks
Mohit
Edited by: Mohit Verma on Feb 10, 2012 4:18 PM

Hi Mohit,
Follow this blog for the ID configuration:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4383
Create Receiver Determination and Interface Determination as described, and add a sender file CC and receiver mail CC according to your needs, plus sender and receiver agreements.
In order to maintain the original file names, use a simple adapter module with the code mentioned here:
http://forums.sdn.sap.com/thread.jspa?threadID=2122711&start=14
Hope this helps,
Greg

Error in Adapter Table Adapter Configuration IDM - Oracle 10g

Error in the configuration of Oracle Database Table Adapter Configuration.
Log:
2007-10-02 10:26:40,843 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : DBProvisioner::createUser : userProperties is xel_usr_id#:#V04#;#xel_usr_password#:#56pddssd#;#xel_usr_status#:#1#;#xel_usr_first_name#:#Juana#;#xel_usr_last_name#:#Rengifo#;#xel_usr_group#:##;#xel_usr_title#:#Analista#;#xel_usr_dept#:##;#xel_usr_comm_lang#:##;#xel_usr_logon_lang#:##;#xel_usr_email#:[email protected]#;#xel_usr_tel_no#:#111-222-4444#;#xel_usr_time_zone#:##;#xel_usr_date_fmt#:##;#xel_usr_dec_ntn#:##;#xel_usr_role#:#System Admin
2007-10-02 10:26:40,859 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : Starting time for createUser method :1191346000859
2007-10-02 10:26:40,875 ERROR [DBADAPTERLOGGER] DBSchemaErrorHandler::error : ERROR : 1:227cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.

Based on your error a few questions come to mind...
What does your Configuration XML file look like? It's root XML node should be xdb_app_map. Your error makes me think you may be pointing at an adapter file versus db schema mapping file.
Are you starting from one of the provided examples like OraApp1.xml? If you followed Step 3: the connector file copy instructions during deployment, you should find the samples in "OIM_home/xellerate/XLIntegrations/DBAppTables/xml/DB_Schema" Or you can search for OraApp1.xml or OraApp2.xml.
Have you configured your IT Resource with the appropriate path to the XML file? If you are on Unix it's going to be case sensitive, I can't speak for a windows path.
I hope this helps. I know I had a few challenges myself when I first took a swing at the DB Table Adapter from the 9.0.4.1 connector pack.
regards,
Jason

JDBC Adapter configuration not initialized:null

i
we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
1.JDBC Driver installation is done
2.RFC Destination type t is done in sap(sender) system.
3.checking the jdbc in VA is done
while running it is giving the following error.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
where we have to initialize JDBC Adapter configuration
Thanks in advance
Prasad Nemalikanti

hi prasad
There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
also check the driver string for the SQL driver 2 parameters
i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
'com.microsoft.sqlserver.jdbc.SQLServerDriver'
This will solve your problem
follow this link
Re: MS SQL Server jdbc Driver installation on XI .
XI JDBC Adapter using stored procedures
thanks
sandeep
Reward points if helpful

How to automate File Adapter Configuration

I am configuring a File Adapter manually then it generates WSDL file and jca files which contains File Adapter configuration. I have XSd file through the XSD can I generate these files (WSDL & jca)?

I have XSd file through the XSD can I generate these files (WSDL & jca)?No. Only adapter wizard should generate these files. Can you let us know more about your use case and tools you are working with?
Regards,
Anuj

DB Adapter configuration with Informix DB

Similar Messages

Maybe you are looking for