DB Apdater Polling in 11g does not update the polling the column

I have simple SOA11g process in which we are polling a table using DB Adapter:
1) The polling column is process_flag and the read value is Y and unread value N.
2) I inserted the record in the table withe process flag as N.
3) The polling begins and the Composite instance is fired.
However this process continues in an endless loop, polling the column again, after the time set in "Polling Frequency" and firing instance again. What I inferred from all this, is that the polling column i.e. process_flag is not getting updated after it's being polled. When we checked from the backend, the process_flag is always 'N'.
Has any one faced this issue and resolved it?

Hi
Please check what is the PollingStrategy used in the adapter configuration,it should be LogicalDeletePollingStrategy.
For example the configuration in the .jca file looks as shown below
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="STATE"/>
<property name="MarkReadValue" value="P"/>
Thanks
Albin I

Similar Messages

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

Application Compatibility does not update the database.

Hi,
I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
Any Help would be appreciated.
Thanks
Rakesh Patel
rakesh patel

Hi Rakesh,
I am not sure if you have resloved your issue.
But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
If you would like further assistance, please post back and we will be always here to help you.
Any concern about this mark behavior, you can just unmark it.
Thanks for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Approval Workflow does not update the Content Approval status if started automatically

Hi,
I’m using a simple Approval Workflow associated with
Content Approval on site pages. It works fine when I set it to be started manually (by using
Allow this workflow to be manually started by an authenticated user with Edit Item permissions
option) and on the completion of the workflow the
Content Approval status is updated accordingly. But when I set it to be started automatically (by using
Start this workflow when a new item is created
/ Start this workflow when an item is changed
options), it does not updates the Content Approval status. Note that I’ve set the
Update the approval status after the workflow is completed (use this workflow to control content approval)
option to true.
Regards

Hello,
It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
a library.
According to the Notes for “Enable Content Approval” option in
this reference:
If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
of an item check box on the Add a Workflow page..
If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
start manually.
That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
Thanks & Regards.
Lily Wu

Hi. I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

I need to update a schema from Sharepoint with namespace
http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
Is there a way to update the dip using VBA.
/Ola
olha

Hi,
This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
Microsoft Office for Developers, to get better support experience:
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Reschedule does not update the schedule line

Dear All expert,
After upgrade to ECC6.0, the reschedule does update the schedule lines eventhough it list all the required to be update in the list.
As I checked , it update the ekpo successfully but does not update the eket.
Is there any suggestion ?

Hi,
On the initial screen of V_V2
Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
Kapil

When I sync my iPad with iTunes it does not update the play count? Is there a setting I need to change?

When I sync my iPad with iTunes it does not update my play counts. Is there a way to make this happen?

Are you using iTunes Match by chance? I had no problems whatsoever with play counts synching between any of my devices until I started using iTunes Match. I turned it off and magically my play counts synced. Once. Hasn't happened again though.

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

Type 2 SCD -- does not update the old value.

I have following columns in the source table:
SSN, credit_score
In the target, I have following columns,
SK_ID, SSN, credit_score, flag
I am flagging the old credit_score as 'N' when updating the row and at the same time it is supposed to enter a new credit score with flag 'Y' in another row.
Second, If a row is completely new, It should be inserted with the flag 'Y'.
SK_ID is the surrogate key and SSN is the natural key, My trigger column is credit_score.
The problem is that when I run this type 2 mapping, it does not update anything but inserts the new rows only.
I have posted the screen shots at the following link.
http://www.box.net/shared/ea9v48r0xa
Thanks for your help in advance.

First of all, thanks for the reply...
You can also look at the screen shots I posted in previous post.
Here is how I am updating the rows (update logic).
If source_SSN=target_SSN and source_credit_score!=target_credit_score
then flag = 'N' (this is the update from 'Y' to 'N' after which i will insert a new row containing new value of credit_score with flag 'Y')
As an example, if my old rows in the target table were:
sk_id SSN credit_score flag
101 2212 654 Y
102 3023 707 Y
Now let's say my source table has these values.
SSN credit_score
2212 648
2220 690
Then my target table should be like this:
sk_id SSN credit_score flag
101 2212 654 N
103 2212 648 Y
102 3023 707 Y
104 2220 690 Y
Do you see what I mean...

FDF does not update the Formdata

Hello,
in php I wrote a a smal script to generate a fdf file but the form does not show the data. I am pretty sure that the code is correct and the fields exists in the pdf.
      // getdata.php
      $fdf_out='C:\PHPCode\Medi\results\test1.fdf';
      $pdf_doc='http://localhost/test2.pdf';
      $outfdf = fdf_create();
      fdf_set_value($outfdf, "Textfeld1", 'mein Text', 0);
      fdf_set_value($outfdf, "DatumsUhrzeitfeld1",date('Y-m-d H:i:s'), 0);
      fdf_set_file($outfdf, $pdf_doc);
      fdf_save($outfdf, $fdf_out);
      fdf_close($outfdf);
      Header("Content-type: application/vnd.fdf");
      $fp = fopen($fdf_out, "r");
      fpassthru($fp);
      unlink("test1.fdf");
after pressing the submitbutton (http://localhost/getdata.php#FDF). I can see a data tramsmission but no new data.
Could I have missed something? LiveCycleDesigner Option?
I there a way to debug the calling PDF to see what is being done?
thanks a lot, this is bugging me since 2 days now..
edgar

Since Adobe provides the ability to create AcroForms that uses the FDF file, it is hardly outdated. And there are many web applications that provide a copy of a user completed form in a pdf format that users with Reader can save by use of the FDF file to provide the data and the link to the associated PDF form.
AcroForms provide features that are not available to LiveCycle Designer forms or LiveCycle Designer needs to use the Acrobat object and Acrobat AcroForms JavaScript to use those features. XML forms can not be flattened nor can they obtain the properties of the identity object.
Both products are about the same age.
I would hardly consider this an outdated product just because there is a different approach.

"Activity Monitor" utility does not update the "CPU Time" column in real ti

If I use Activity Monitor to display "All Processes", why doesn't it update the "CPU Time" column in real time? It updates the "% CPU" and others, but not the total "CPU Time". I have all columns viewed if that matters. However if you double click on a process in the Activity Monitor window, the details about the process are displayed in another window (number of threads, ports, CPU Time, Context Switches, Faults, etc), and as long as that detail window exists, the "CPU Time" column is updated in real time in the main Activity Monitor window. Is this a bug or a feature?? Does Leopard do this also? Have lots of free memory so that is not an issue. Thanks...
-Bob

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

My iTunes does not update the album covers properly.

I have the album covers in the same file location as the MP3 songs, and each album is located in a different file location, but iTunes does not load my album covers automatically. half the time I have to load the album cover from my library manually.
I have authorised the computer, re-installed iTunes, manually selected all songs and updated album covers in the advace section. Nothing works.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

IDOC_INPUT_HRMD, it posts the document but does not update the Infotypes

Hi,
I am trying to trigger the IDoc Type 'HRMD_A06'. This Idoc was posted successfully, with the status as '53' (inbound IDoc). The Processing Function Module is IDOC_INPUT_HRMD for the IDoc "HRMD_A06". However the infotypes are not updated. The infotypes I am trying to update are 0000,0001,0002,0006, & 0008.
If someone has a solution for this issue. Kindly let me know.
Regards,
Narun

Hi Srinu,
Again....
Whats happening in Debug ???
Just clone the FM as it is and use the FM HR_INFOTYPE_OPERATION instead of other.
Parameters:
The following code is for infotype 15 inside custom FM which i have done. u can use for ref.
CALL FUNCTION 'ENQUEUE_EPPRELE'
        EXPORTING
          pernr          = l_wa_p0015-pernr
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc = 0.
        CALL FUNCTION 'HR_INFOTYPE_OPERATION'
          EXPORTING
            INFTY                  = c_0015
            NUMBER                 = l_wa_p0015-pernr
            SUBTYPE                = l_wa_p0015-subty
OBJECTID               =
LOCKINDICATOR          =
            VALIDITYEND            = l_wa_p0015-begda
            VALIDITYBEGIN          = l_wa_p0015-endda
   RECORDNUMBER          =
            RECORD                 = l_wa_p0015
            OPERATION              = c_ins1
            TCLAS                  = c_a
            DIALOG_MODE            = '0'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
          IMPORTING
            RETURN                 = l_i_return .
KEY                    =
To dequeue the selected employee
        CALL FUNCTION 'DEQUEUE_EPPRELE'
          EXPORTING
            pernr = l_wa_p0015-pernr.

APEX_ITEM.date_popup does not update proper row with column sorting on

I have the following example sql report query on a page:
select rownum rowno, object_name
, object_type
,APEX_ITEM.date_popup(43, null, created, 'DD-MON-RR',9) date_created
from user_objects
This works fine when I tried to update the date if no sorting is involved. If I allow sorting in APEX by clicking the column headings, the row numbers no longer match up with the the displayed rows. So in order words, if I had the following
Row MyCol Date
1 Z
2 B
3 K
If I enabled sorting and click the MyCol column heading, then the following would result:
Row MyCol Date
2 B
3 K
1 Z
If I then enter a date for the first displayed row, MyCol=B, then it will update the MyCol=K row because it goes by rownum and it thnks it is rownum=2 where MyCol=B.
This use to work by putting in a unique id column instead of null for the 2nd parameter to the API. The latest doc says that parameter is depracated and this no longer works. It seems to always go by rownum, and therefore won't work with sorting.
Any workaround or suggestions?
We need to have a query similar to above, with sorting enabled on a number of columns and then have a custom PL/SQL process called when the submit button is pressed. It would reference the date column as APEX_APPLICATION.G_F43(I) in this example.
It used to work. Has this functionality been removed?

rwessa,
Right now, there is no reasonable workaround for this immediate issue of using APEX_ITEM.DATE_POPUP in your query and sorting via PPR. The problem is that the generated JavaScript as part of APEX_ITEM.DATE_POPUP is generated at query execution time and then sorted by the reporting engine afterwards (via AJAX/Partial Page Refresh).
About the only workarounds I can suggest are to disable column-heading sorting for the SQL-based report. If you want sorting, implement sorting via a select list and then use a region type of PL/SQL function returning query, where you append the ORDER BY clause to the SELECT statement. You may also wish to investigate using regular reports (and changing the Display As of the column) or using tabular forms, which would not exhibit this behavior.
I hope this helps.
Joel

DB Apdater Polling in 11g does not update the polling the column

Similar Messages

Maybe you are looking for