Db backup alerts in sap

Hi ,
We are scheduled sap db ( db2) backup's in DB13 . Backups are happening fine without any issue. After completing the backup I  need to trigger the backup status through email .
Kindly let me know how to enable this option.
Regards,
Rai

Dear Marks,
When scheduling backup during db13
Fist I give  start Time
Then Select   Redo log backup
Then continue, It ask Generic tape name  i.e  sap_prd01
Then I Continue
Profile    initPRD.sap
Select Verifaction
Then this messege comes
CPMMIT FAILED IN RSORAADM, OBJECT JOB , FUNCTION CREATE, RETURN CODE 4
Where is the problem ?. I have change in Parameter i.e
Backup_dev_type =disk
backup_root_dir =f:\BACK
Because I am taking a backup in Drive F in BACK folder
Plesae Help
Manu

Similar Messages

  • How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to configure alerts in SAP R/3 System.

    Hi,
       We have R/3 system installed in our system.Now i want configure alerts to display for users.How can i configure alerts in that R/3 System.Send me the realted information and links.
    Regards,
    Kiran.

    Hi Bhogi,
    The Alerts in SAP XI can be raised for error happening in:
    1. Adapter Engine
    2. Integration Engine.
    1. These Alerts are system generated in case anything happens in either of the component.
    For this you need to:
    1. Create ALert Category in the Trnasaction ALRTCATDEF
    2. Create Alert rules in Runtime Workbench--> ALert Configuration and associating these rules to Alert category.
    If you want you can do it without a BPM
    and throw an exception in case any of the values is missing:
    have a look at this weblog on how to throw exceptions
    in a nice way:
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    Also just go through Raising Exceptions in SAP XI Mapping and see if it helps you solve the problem.
    Also go through these links:
    Forwarding Alerts to Alert Management (ALM)
    Alert Management
    XI: Alerts - Step by step
    XI: Alerts - Troubleshooting guide
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
    For a Simple case with BPM refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
    To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
    Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
    1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
    2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
    3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
    http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
    Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
    I hope it helps.....
    Reward points if this helps
    Regards
    Vani.

  • How to customize alert in sap PI 7.0

    Iam able to generate alerts using standard Alert configuration.
    In our environment , we have different namespaces for different scenarios.
    Now based on the error message, we need to categorize the mail to specific receipients.
    As I browsed through forums, I have got SALERT_CREATE rfc.
    But I didnot understand How to use that.
    Could any one helpout of it.

    Hi
    Check these documents. I think those will be help for you
    Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 1 – ESR
    Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 2 – ID
    Michal's PI tips: Component-Based Message Alerting

  • Sync Proxy alerting in SAP

    Hi,
    I have a scenario as follows:
    SAP sender sync proxy -> PI -> JDBC (action = update_insert)
    The JDBC receiver adapter will send back the number of records updated or inserted. My question is how to raise an alert in SAP based on the response from the JDBC adapter? For example if the result says no records were updated or inserted I would like to raise an alert in SAP/PI.
    Do I simply define the Sender Interface to include a response and standard fault? then use a suitable method to raise a fault exception in SAP? Can the fault on a sync proxy be used in this way?
    I know there is a blog that shows how to raise an alert for an async proxy scenario: Fault Message Types - A Demo (Part 1).
    Thanks
    Che

    Hi Che,
    The blog gives the details for fault response from receiver. In your case you will receive the response from JDBC in one format for successful and no update message.
    For your requirement, you can raise alert in UDF. But do you want to stop the message and raise alert? Or pass the message.
    Please check the below blog
    Hacking: To get error from the PI Mapping Mapping realtime.
    I think the response should go to sender (proxy) and alert or further action should handle in proxy.
    regards,
    Harish

  • Data Backup Strategies in SAP

    HI ALL,
    What are some of the different ways of backing up SAP Data?

    HI,
    There are many backup strategies for SAP.
    1) If you can shutdown your server at night, you can take an offline database backup with redo logs.
    2) If your server needs to remain on all 24 hrs, you can take an online backup with redo logs.
    3) Once in 15 days or a month, you can take an O.S. level backup.
    Also devise a strategy to keep a copy of backup at a different location and follow it. There should be at least one copy of O.S. Level backup at any other location other than your office premise.
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • By mistake I ran Windows Backup/Restore with SAP services on  URGENT

    Dear all
    What I did by mistake I ran Windows Backup/Restore with SAP services on (I stopped win sql services and SAP instance).
    After restore under same circumstances I could not start istance (actually it started but after connect with saplogon dispetcher stopped).
    When trying to restore 2nd time(with deleted AFGDATA1,AFGDATA2, AFGDATA3 , AFGLOG and usr under c:\ I realized I can not delete C:/usr directory (with subdrectories) as SAP services were locking some files. (i stopped services and deleted those files I have them in rcycle bin),
    Can I somehow restore the system

    Hello Tina,
    - what is the status of SAP service? can you start it? If not, what is written in application event log?
    - If service can be started, are you able to start SAP system? If not, what is written in sapstartsrv.log, dev_disp and dev_w0, could you put output of them?
    - which files exactly have you deleted?
    I afraid that the locked files were not backup and they will not be restored in this case. Further steps depend on what the files you have deleted.

  • Finding correct backup size in sap level

    Hi All...
                 I want to know the successfull backup size in sap level can any one help me out in finding the correct path in detail log in db12 tcode.

    Hi,
    Are you using brbackup? If yes, go to DB12 -> Overview of database backups -> click on the backup log ID -> Detail log -> and look for "total size" and you'll see something like:
    BR0061I 63 files found for backup, total size 1165346.688 MB
    Thanks,
    Nicholas Chang

  • Configure backup device in SAP(DB13)

    I have installed the ECC 6.0 with SQLServer 2005 ,now I want to
    configure the backup device in it. I am using external hdd for backup.
    Please suggest me how to configure backup device in SAP(DB13) and
    database level.
    where I have to set the parameters for backup device.
    Thanks

    Hi..
    You need to configure initSID.sap inside Kernel.
    Choose backup device type to disk
    backup_dev_type = disk
    and change backup root directory
    backup_root_dir = < Your_External_HDD_adress>
    e.g. G:/backup/
    Hope it should work....
    Regards,
    Abhimanyu
    Edited by: Abhimanyu Pandey on May 21, 2009 9:02 AM

  • I am on my iPad.  I have a backup alert.  When I click OK it doesn't do anything.  I can't access anything.  Any ideas?

    Hello -
    I am on my iPad and have received an iCloud Backup alert.  When I click OK, it doesn't go away.  Any idea on how to get out of it? 

    Welcome to the Apple Community.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

  • Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

    Hello All
    I hope that you can help me is juts a doubt about 2 check boxes
    I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
    that i don't know what is the difference
    The path is the following
    Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert  --> Setup EarlyWatch Alert
    Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
    Thanks and have a nice day

    Hello Cherios,
    The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
    Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
    There should now be no doubt about the two check box fields .
    Hope this information is helpful.
    Regards,
    Paul

  • Errors in Offline Backup via DB13 SAP & Oracle on Linux

    OS: Linux Database : Oracle Systems Affected : Production & Disaster Recovery Server
    Hi
    We have offline backup scheduled every friday via SAP the backup runs fine & copies all the files in the backup directory but when i go see the backup logs in DB 14 i see the Offline Backup ending with Error Code 0005 & when i see the Detail logs i see following in red
    BR0278E Command output of '/oracle/UHP/102_64/bin/sqlplus /nolog < /oracle/UHP/sapbackup/.beelhrfo.spi':
    BR0279E Return code from '/oracle/UHP/102_64/bin/sqlplus /nolog < /oracle/UHP/sapbackup/.beelhrfo.spi': 0
    BR0302E SQLPLUS call for database instance UHP failed
    BR0306E Start and open of database instance UHP failed
    Also if i check the BRARCHIVE i see them ending with following errors in Detail Log
    BR0278E Command output of 'LANG=C cd /oracle/UHP/sapreorg && LANG=C cp spaceUHP.log paramUHP.log /backup/UHPARCH//UHP':
    cp: cannot create regular file `/backup/UHPARCH//UHP/spaceUHP.log': Permission denied
    cp: cannot create regular file `/backup/UHPARCH//UHP/paramUHP.log': Permission denied
    BR0280I BRARCHIVE time stamp: 2010-10-30 23.02.40
    BR0279E Return code from 'LANG=C cd /oracle/UHP/sapreorg && LANG=C cp spaceUHP.log paramUHP.log /backup/UHPARCH//UHP': 1
    BR0222E Copying space_log to/from /backup/UHPARCH//UHP failed due to previous errors
    BR0202I Saving /oracle/UHP/saparch/aeelofvf.svd
    BR0203I to /backup/UHPARCH//UHP ...
    BR0202I Saving /oracle/UHP/saparch/archUHP.log
    BR0203I to /backup/UHPARCH//UHP ...
    BR0278E Command output of 'LANG=C cp /oracle/UHP/saparch/archUHP.log /backup/UHPARCH//UHP':
    cp: cannot create regular file `/backup/UHPARCH//UHP/archUHP.log': Permission denied
    BR0280I BRARCHIVE time stamp: 2010-10-30 23.02.40
    BR0279E Return code from 'LANG=C cp /oracle/UHP/saparch/archUHP.log /backup/UHPARCH//UHP': 1
    BR0222E Copying /oracle/UHP/saparch/archUHP.log to/from /backup/UHPARCH//UHP failed due to previous errors
    Please also note that we have a Disaster Recovery Server too & the above mentioned errors are in our (Production )Primary Database & once this backu finished the DR Server stops getting any log files, this happens only when this offline backup on every friday runs,
    Issues
    The backup ends with errors although the backup file is generated & all data is copied
    DR Server dont get redo log files after this offline backup on every friday

    for the Cp errors i will see the permissions in backup/UHP ( this error is happening in online backup ) my main concern is the error occured in offline backup as it is somehow connected with our DR SERVER NOT GETTING THE LOG FILES EVEN AFTER THE SYSTEM IS UP ( yes if the primary is down no logs will be shipped to standby i know that but even after the primary is up after a offline backup via SAP via DB 13 the standby dont get any log files unless i restart the database and SAP )
    So the error in the offline backup mentioned above in my post occurred at 29 OCT 15: 45  20
    BR0302E SQLPLUS call for database instance UHP failed
    BR0306E Start and open of database instance UHP failed
    after this my primary database comes up & sap starts but the DR server dont get any logs & also the backup logs show the above errors in red
    Given below is the text from Oracle alert file for the same time duration when the system tries to start the database & the above mentioned error comes up in opening the database time Stamp : OCT 29 15: 45 20
    Deprecated system parameters with specified values:
    log_archive_start
    End of deprecated system parameter listing
    This is the only oracle alert log errors i can find relevant to database instance errors from DB 14
    moreover in the alert file it also starts the data broker service relevant to i guess DR server in that all seems fine it starts everything then it gives this error & then keeps giving errors ( from oracle alert log file )
    Error 12154 received logging on to the standby
    Fri Oct 29 15:45:37 2010
    Errors in file /oracle/UHP/saptrace/background/uhp_arc0_12086.trc:
    ORA-12154: TNS:could not resolve the connect identifier specified
    FAL[server, ARC0]: Error 12154 creating remote archivelog file 'UHR'
    FAL[server, ARC0]: FAL archive failed, see trace file.
    Fri Oct 29 15:45:37 2010
    Errors in file /oracle/UHP/saptrace/background/uhp_arc0_12086.trc:
    ORA-16055: FAL request rejected
    ARCH: FAL archive failed. Archiver continuing
    Fri Oct 29 15:45:37 2010
    ORACLE Instance UHP - Archival Error. Archiver continuing
    & then keep on saying given below error in oracle alert log file
    Fri Oct 29 15:51:32 2010
    Errors in file /oracle/UHP/saptrace/background/uhp_arc8_12102.trc:
    ORA-12154: TNS:could not resolve the connect identifier specified
    PING[ARC8]: Heartbeat failed to connect to standby 'UHR'. Error is 12154.
    Thanks for your help again i would appreciate a little more assistance on this.
    Edited by: Prashant Shandilya on Oct 31, 2010 12:18 PM

  • Backup failure from SAP after oracle upgrade

    Hi All,
    We have upgraded oracle from 11.2.0.1.0 to 11.2.0.3.0 on windows 2008 R2 VM(64 bit). We are able to take backup successfully through BRtools at OS level but when we are trying through DB13 we are getting error as mentioned below.
    BR0274E File 'L:\ORACLE\SOC\SAPDATA4\SYSTEM_1\SYSTEM.DATA1' not found
    BR0274W File 'K:\ORACLE\SOC\SAPDATA3\TEMP_12\TEMP.DATA12' not found
    BR0314E Collection of information on database files failed
    Our BRtool verison is 18 so I think SAP note 1625038 doesn't address our problem.
    We have placed the utl file in the new oracle home and also did some other required changes.
    Kindly suggest how we can resolve this problem.
    Regards,
    Mridul

    Hi Sunil,
    We haven't did any modification in utl file, just placed that in new oracle home and modified the location of utl parameter file in initsid.sap.
    Venkata,
    DBcheck is ending with warning. Below are some extracts:
    BR0970W Database administration alert - level: ERROR, type: DATA_FILE_MISSING, object: L:\ORACLE\SID\SAPDATA4\SYSTEM_1\SYSTEM.DATA1
    BR0973W Database operation alert - level: WARNING, operation: beidjqtt.fnr, time: 2012-03-20 14.42.33, condition: Last complete database backu
    BR0973W Database operation alert - level: WARNING, operation: beidjqtt.fnr, time: 2012-03-20 14.42.33, condition: Last 'fnr' operation failed
    BR0973W Database operation alert - level: WARNING, operation: ceidgtux.log, time: 2012-03-20 00.38.03, condition: Last 'log' operation failed
    BR0973W Database operation alert - level: WARNING, operation: behyzktk.dbv, time: 2012-02-26 09.00.24, condition: Last 'dbv' operation failed
    BR0973W Database operation alert - level: WARNING, operation: vehauwtz.dpt, time: 2011-10-21 12.20.47, condition: Last 'dpt' operation failed
    BR0973W Database operation alert - level: WARNING, operation: aehauext.sve, time: 2011-10-21 08.59.37, condition: Last 'sve' operation failed
    BR0978W Database profile alert - level: ERROR, parameter: REMOTE_OS_AUTHENT, value: FALSE (<> TRUE)
    Regards,
    Mridul

  • Cannot send alert from SAP by Outlook integration

    Dear All,
    We are on SAP8.8. When we create an Alert for a user query, we want to send the report by e mail as well.
    We can receive the report by message in SAP. We have no error message in SAP to say send out failed.
    But we didn't receive anything from SAP for the report.
    I tried to sent out email from SAP. I click the icon then sent out e mail. It can send out for me. So the outlook integration add-on should be fine. Is there anywhere we should check to see if the e mail has been sent out?
    Thanks in advance.
    Regards,
    Yuka

    hi,
    In Meassges/Alert overview,under sent messages tab,you can see messages which is sent from your system or if you are not able to send email,Goto administration->addons->Outlook integration->Default settings...you check the check box thats it.

  • Backup message error -SAP system is running or SAP user is connected to dat

    Hello ..
    when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
    BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
    BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
    BR1025I Please shut down SAP system first or use the 'offline_force' option
    BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
    BR0054I BRBACKUP terminated with errors
    [Major] From:  "OMNISAP" Time: 08/08/10 05:31:49
    BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
    i am new on this, what should i review into the db?
    Regards and thanks in advance
    Dma.

    Hello Daniela,
    you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
    This is also described in the official documentation:
    http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
    offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
    Regards
    Stefan

Maybe you are looking for