DB Check not being performed.

Hi All,
Database check is not being performed and it fails with the error log as "Job has exceeded its latest start date"
Job Name : DBA:CHECKDB_________@010000/3007.
Version : 4.7
Database : Oracle 9.2.0.6.0
OS : AIX
Let me know if anyone has an idea where exactly it went wrong and how to go about it to rectify this.
Thanks & Regards
Solman P.

Hi Solomon,
This may happening because the start date is in the past.
paste here joblog for failed job
sm37->select the failed job->click on joblog
Also give the job details of latest released job
start time, start date etc
Regards
Ashok

Similar Messages

Material availability check not being executed

First of all: I’m an SD consultant with limited knowledge about PS
At our current client are we facing an issue with the material availability check in project system orders, created through e.g. CJ20N. The client mentions, that the availability check on the components is not being executed and therefore is effecting their operations
I did check SAP OSS and found the following OSS notes:
01774744           Planning quantity of PIR is not getting updated properly
01745038           BAPI_NETWORK_COMP_CHANGE is updating PBED-PLNMG incorrectly
01774657           BAPI_NETWORK_COMP_CHANGE is not updating PBED-PLNMG –III
Those notes were also implemented
Did find transaction CJBN and did some testing, but did get the message
BL 001
Availability check not activated
I did check transaction
OPJJ and everything looks good.
OPJK and everything looks good
At this point I’m totally clueless on how to resolve the issue.
If you would have any suggestions, pointers or remarks: they would be appreciated.
Thanks and regards,
Jan Pel

Hi,
Can you please check whether the configuration of material availability check in PS is proper and in place or not. Please check the following sap help link on material's availability check in PS:
Material Availability Check - Material - SAP Library
Regards
Saurabh

Weird mouse problem (clicks not being performed, -)

Recently I am suffering from a really weird problem.
The middle mouse button shows a really strange behaviour:
I'm using KDE from [extra], and middle clicking e.g. a link in a webbrowser (no matter which toolkit it uses) instead of opening one tab, opens the link in several tabs.
Also middle clicking on a tab, normally should close *one* tab, while here it often closes more than one tab. Since this happens in every application I use, no matter which toolkit is used, this cannot be a KDE/Qt problem, since e.g. Firefox is affected by it too. I also doubt that GTK is the cause of this problem…
[The middle clicking problem has been solved, by cleaning the mouse wheel]
[The problem below, still persists]
Furthermore, sometimes my laptop looks like it enters a "state", where my clicks are not "performed" the normal way:
E.g. I had a media player running, when my laptop got into this "state". No matter where I clicked on this app, the clicking action was performed on the Play button. Using Alt+Tab to focus another window/bring it to the front, and clicking in this window anywhere again resulted in the Play button getting clicked.
After quitting the media player app (through a keyboard shortcut) my clicks still did not work normal. They still simply were not performed. In order to "re-gain" the ability to click, I had to log out first.
Since I've setup my Arch Linux not to automatically start X/KDM after logging out, I found myself in the terminal, where I ran startx, in order to run KDE.
The terminal still had some output of my X session, but it wasn't displayed with normal characters, but rather with some weird characters, looking all scrambled and stuff, as you can see on the screenshot. http://imagebin.org/100067
I currently use the packages from the testing repo, but IIRC this behaviour was there even before installing the testing repo packages.
Extra information:
kernel26 2.6.34-1
xorg-server 1.8.1-1
nvidia 195.36.24-2
xf86-input-evdev 2.4.0-1
I run Arch Linux x86_64 on an Acer 5741G Laptop, with a NVidia Geforce GT 320M.
Interestingly, another user who suffers from the same bug is running a computer with intel graphics, so it probably is not the nvidia driver causing the problem either.
Originally the bug was reported as a rekonq bug: https://bugs.kde.org/show_bug.cgi?id=238987
Thank you
Last edited by pano (2010-06-09 11:43:21)

Hello,
I seem to suffer from the same problem. Sometimes (perhaps triggered by amarok, but I have to investigate this further before blaming this app) the left mouse button stops working. I can not perform left-klicks anymore. Everything is fine with the right button. If I log out and in again the mouse if fully back. In this loop X has not been restarted.
My setup:
KDE 4.4.5 (official packages)
X: X.Org X Server 1.8.1.902 (1.8.2 RC 2)
kernel: 2.6.34-ARCH #1 SMP PREEMPT
architecture: x86_64
mouse: Logitech MX1000 Laser (Logitech, Inc. MX-1000 Cordless Mouse Receiver)
If s.o. will ever work in this I will be happy to provide any information I can come up with.
Cheers and good night.

TS1424 I downloaded an album off of the itunes store that had the names of all the actual artists in the artists column but the songs that were downloaded are clearly not being performed by the right people, how can I get my money back?

Is there a way I can get a refund for this purchase?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

RDS Gateway 2012, RemoteApp Displays "A Revocation check could not be performed for the Certificate" via RDWEB

I have searched through the forums and there are a number of posts that are similar but all the checks they list seem to not apply to this one.
My current setup is as follows
All Servers are 2012 R2
1 x DC server
1 x RDS Gateway server with RDS Web installed
1 x Session Host Server
Certificate supplied by godaddy with 5 names. (included is the name of the RDS Gateway/Web server in the certificate, the internal name of the session host server is not included as the internal names are differnet to the external)
My tests are as follows
Navigating to the RDSWEB page from a machine inside the same network (windows 7 sp1) but not on the same domain is fine no errors and logging in and launching any published application is fine with no errors.
However logging in on another machine that is external from the network (windows 7 sp1) is ok up to the point of launching any of the published apps I get the error about ""A Revocation check could not be performed for the Certificate". this
prompts twice but does allow you to continue and login and use the app till the next time. If I view the certificate from the warning message all appears to be ok with all certs in the chain.
I have imported the root and intermediate certs to each of the gateway/rdsweb server and session host server into the computer cert store just to be on the safe side. This has not helped, I have also run the following command from both windows 7 machines
with no errors on either
certutil -f –urlfetch -verify c:\export.cer
I cant seem to see where this is failing and I am beginning to think there is something wrong with godaddy cert itself somehow.
If I skip rdsweb and just use MSTSC with the gateway server settings then I can login to any machine on the network with no errors so this is only related to launching published apps on the 2012 R2 RDWEB or session host servers.
Any help appreciated

Hi,
1. Please make sure the client PCs have mstsc.exe (6.3.9600) installed.
2. If you are seeing a name mismatch error, you can set the published name via this cmdlet:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
To be clear, the above cmdlet changes the name that shows up next to Remote computer on the prompt you see when launching a RemoteApp. You should have a DNS A record on your internal network pointing to the private ip address of your RDCB server.
Additionally, in RD Gateway Manager, Properties of your RD RAP, Network Resource tab, you should select Allow users to connect to any network resource or if you choose to use RD Gateway Managed group you will need to add all of the appropriate names to the
group.
For example, when launching a RemoteApp you would see something like Remote computer: rdcb.domain.com and Gateway server: gateway.domain.com . Both of these names need to be on your GoDaddy certificate.
Please verify the above and reply back so that we may assist you further if needed. It is possible you have an issue with the revocation check but I would like you to make sure that the above is in place first.
Thanks.
-TP
Thanks for the response.
To be clear I am only seeing a name mismatch and revocation error if I assign a self signed cert to the session host as advised earlier in the thread by "Dharmesh Solanki", if I remove this and assign the 3rd party certificate I then
just get the revocation error , I have already ran the powershell to change the FQDN's but this has not resolved the issue although the RDP connection details now match the external url for RDWEB when looking at one of the remoteapp files. The workspace
ID still shows an internal name though inside this same file.
RD Gateway is already set to connect any resource, when connecting using remote app both names (RDCB/RDGateway) show as being correct and are contained within the same UCC certificate. I also already have a DNS entry for the Connection broker pointing to
the internal ip.
Do you know if the I need the internal name of the session host servers contained within the same UCC certificate seeing as they are different fqdn's than what I am using for external access ? I resigned the UCC certificate and included the internal name
of the session host server to see if this would help but for some reason I am still seeing the revocation error. I will check on a windows 8 client pc this evening to see if this gets any further as the majority of the testing has been done on windows 7 sp1
client pc's
Thanks

An index can not being used and still afect a query performance?

Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?

user11173393 wrote:
Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?You said that is what is happening, & I believe you.

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Check box in a table not being read on auto read by JAWS(Screen Reader)

Hi Experts,
I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that is provided by JAWS. I have even specified label property for af:selectBooleanCheckbox. Can anyone help me regarding this issue.
Regards,
Santosh.
Edited by: 930871 on Jun 13, 2012 6:54 AM
Edited by: 930871 on Jun 13, 2012 7:25 AM

Can anyone help me on this issue. This is really urgent.

Iphone is not being recognized in itunes. Turned off phone, rebooted pc, checked all connections. Still no itunes recognition. What should I do?

iphone is not being recognized in itunes. Turned off phone, rebooted pc, checked all connections. Still no itunes recognition. What should I do?
Just received from Verizon.

Sorry, didn't notice that you were using OS X. Here's the troubleshooting steps for a mac:
http://support.apple.com/kb/TS1591. If this doesn't work, try reinstalling the Apple Mobile Device Service as described here: http://support.apple.com/kb/ht1747.

My toshiba external hard drive is not being recognized, except when I eject it. I have the preferences checked to show icon and have checked utilities folder. nothing. Help!

I have a iMac, Yosemite 10.10 and my toshiba external hard drive is not being recognized, except when I eject it!. I have the preferences checked to show icons and have looked in the utilities folder..nothing. I have also changed ports. ??

A few things to try:
1-Repair permissions and restart your computer.
2-Zap the PRAM
3-Use Software Update/App Store to update your OS to OS 10.10.3. Also, update everything SU/AS has to offer for your computer. When done, repair permissions and restart your computer.

IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

How do you know the library was modified with iPhoto 9 (11)? If you've never had iPhoto 9 on your Mac it could'nt have. It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Check Number not being generated

We do not have SAP Check printing functionality activated right now. So the checks will be handwritten. When i created the Payment Method for check, I assigned RFFOEDI1 in the payment medium program. I also created the check lot for that House bank and Company code in FCHI. I created a variant for RFFOEDI1 although i dont really need anything printed. Now when I am executing payment run, the payments are being posted fine. The check number is not being populated. I checked the Register (FCHN) and there are no entries. The Vendor has CHeck payment method in the master record and the payment method is also assigned as "Checks" in the Invoice.
Not sure what is wrong. Help is highly appreciated.

Hi,
In case you use the check printing program from SAP, it will generate the check information and will assign to the documents automatically. However it is upto you whether you need to print the checks or not? But the check numbers have been generated by SAP. You can manually create the check for the payment documents matching those check numbers.
The only thing is that the manual control should be there so that the check is manually created with same number as system generated in payment run. (Otherwise, do not generate check in F110, rather create check manually and assign to payment document in FCH5.)
Regards,
Gaurav

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

Backend checks could not be performed. Inform system admin

Hello SAP Experts,
We have encountered the error Backend checks could not be performed. Inform system admin in a lot of POs in SRM. We are using SRM 7 and SP12.
Before the error occured, the WBS elements were not maintained in SRM but the POs were created since our SHC has automatic approval.
Currently, the WBS elements are now in SRM but the POs are stucked with the error Backend checks could not be performed. Inform system admin.
We have informed the Basis team if there are any issues in the RFC connections but there is no error.
The only POs affected were the ones wherein the WBS element was not maintained before but is now maintained in SRM.
Regards,
Romeo

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

Mail is not being checked automatically

My e-mail accounts are not being checked automatically even though I have them set to be check every hour. I also tried a day at 30 minutes but I noticed the iPhone is still not checking my messages. I have to check manually. Any suggestions?

I am having the same issue, which appears to have started with the last firmware update to my iPhone. Yahoo no longer pushes mail to my iPhone, and the check every 15 minutes does not work - I have to manually refresh my email accounts to check for mail. This used to work correctly. I've had no luck finding answers online yet.

DB Check not being performed.

Similar Messages

Maybe you are looking for