Db cluster for netweaver
Please let me know the procedure to setup SQL cluster server 2000 for Netweaver stack 09.
Please let me know the procedure to setup SQL cluster server 2000 for Netweaver stack 09.
Similar Messages
-
Changing login module stack for Netweaver Portal?
G'day,
I want to change the login stack for Netweaver Portal (at http://<host:50100/irj).
Currently portal is configured in Visual Administrator to use the "ticket" authentication template. I can change this authentication template and change how I authenticate to portal.
But changing "ticket" authentication template also changes how other applications perform authentication. So I changed the login module stack for the "com.sap/irj*irj" component to not use an authentication template, and added my own login modules.
But when I access portal again, the "ticket" authentication is still used. I restarted the cluster to be sure but no matter what login modules I configure for "com.sap/irj*irj", only changes to "ticket" have any effect.
So: how do modify the login module stack for portal, without modifying the "ticket" authentication template?
--GeoffHi,
If you'd like to change the authentication stack only for the EP but not for all applications that use UME authentication, then you have to modify the descriptor authschemes.xml. You have to change the scheme "default" to point to another LM stack instead of "ticket" as it is shipped.
Kind regards,
Tsvetomir -
SAP EhP1 SPS6 for NetWeaver 7.0 - tp status 230
While installing SAP EhP1 SPS6 for NetWeaver 7.0 in PBW
(BI production system) the process fails at phase
MAIN_NEWBAS/TABIM_UPG - with tp status 230 and unresolved requests in
buffer.
Anyone has a clue ?
Best regards,
Roger
PHASES.LOG
1 ETQ201 Entering upgrade-phase "TABIM_UPG" ("20110716054322")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '61', GwService = 'sapgw61'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/TABIM_UPG'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TABIMUPG.BUF'
2 ETQ399 Arg[1] = 'TABIMUPG.TPP'
2 ETQ399 Arg[2] = 'TABIMUPG.TP0'
2 ETQ399 Arg[3] = 'TABIMUPG.ELG'
2 ETQ399 Arg[4] = 'XPRASUPG.BUF'
2WETQ399 tp terminated with status 230
4 ETQ380 computing toolpath for request "TP_ACT_ON_NEW_BUFFER"
4 ETQ381 request "TP_ACT_ON_NEW_BUFFER" means "act on the tp buffer,
new format"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SYS"
4 ETQ383 translates to path "/usr/sap/PBW/SYS/exe/run"
2 ETQ399XAnalyze summary error logfile TABIMUPG.ELG and remove all error2 ETQ399Xconditions as described in the upgrade manual
1 ETQ207 Executing post-phase DB specific actions.
4 ETQ010 Date & Time: 20110716054327
SAPehpi.log
CURRENTPHASE MAIN_NEWBAS/TABIM_UPG
...started at 20110716054322
...begin processing at 20110716054322
INFO: Nothing has been done in TABIM_UPG.
..times self: 0.130000/0.060000 usr/sys, children 1.110000/0.000000
usr/sys.
..finished at 20110716054327 with status UNRESOLVED REQUESTS IN BUFFER.
Error message set: 'Unresolved requests in buffer PBW
Check logfiles 'TABIMUPG.ELG'
and '/BWIASP1/usr/sap/PBW/put/EHPI/abap/log/SAPehpi.ECO''
...begin dialogue at 20110716054328Added *allobj to PBWOFR user profile and repeated the phase with success.
-
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
SAP Installation in Cluster for ECC Ehp4 SR1 in one cluster
Dear Experts,
Platform is Windows 2008, SQl Server 2008, ECC Ehp4 SR1
In our project, we are implementing ECC 6.0 Ehp4 SR1. Prior to this release, we use to have ABAP & JAVA (dual) stack in single installation. But going through installation guides and posts in SDN understood that now ABAP and JAVA has to be installed separately with different SID.
We have installed development system with separate SID for ABAP stack and java stack in the same box. Similarly, we did it for quality system also.
Now, we need to install the production system which will be in cluster. Earlier we have done cluster installation for ABAP & JAVA stack which would come in same cluster only. But now, since ABAP and JAVA have to be installed with separate SID, can I install both ABAP and JAVA stack in same cluster with two nodes or do we need to have separate cluster for ABAP and JAVA. As of now, we only have two nodes available. If we need to go with separate cluster for ABAP and JAVA we need to get two additional nodes.
So, let me know whether we can use existing two nodes and create a cluster and install ABAP and JAVA with different SID's on it. I have gone through the installation guide and could understand that it can be done. Hence let me know, whether I can go with single cluster. If so, then would be the advantages and disadvantages.
Thanks & Regards,
SharathHi Sharath Babu,
The ASCS & SCS instance must be installed and configured to run on two MSCS nodes in one MSCS
cluster. Ofcourse ESR is also on the same lines.
In brief, for each SAP system you have to install one central instance and at least one dialog instance.
For example, if your local instance on both nodes should have below listed items
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
And these above folders are junction point with Central Instance that's build in SAN Drive with similar set of folders
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
Regards
Sekhar
Edited by: sekhar on Nov 27, 2009 10:25 AM -
Setting up a cluster for the first time: newbie questions
Any help appreciated with this situation:
I'm trying to set up a cluster for the first time and running into
issues (no big surprise). I'll outline my situation and pose questions
as they arise. If/when I get things to work I'll post a step-by-step
summary of what it took to get a simple cluster going.
Here's what I have:
machines:
1 Windows 2000 machines with WL 6.1
2 RedHat Linux machines with WL 6.1
All machines are on the same Home LAN, can see each other, etc.
IP addresses are:
Windows box: 192.168.1.100
Linux box 1: 192.168.1.102
Linux box 2: 192.168.1.103
servers:
I've set up the Windows machine as my admin server, and set up
a managed server on each Linux machine. I created a cluster that consists
of the 2 Linux machines and deployed the web app and EJB to the cluster.
The Windows machine is acting as a Proxy using ClusterServlet.
The web application has been set as the Default Web Application on the
two Linux machines. All 3 machines are listening on ports 80/443. I also
set up session memory replication through the console.
Application:
I have an application that I package as an EAR file. I'm using it as a
"reference" application designed to mimic a real world app as much as possible.
The EAR file contains a web application that uses Struts. It also consists
of a single Stateless Session Bean. The WAR file and EJB Jar are all
packaged up into the EAR file. I've been able to run this application just
fine on a single managed server on all 3 machines.
The web application works fine, and it can invoke the EJB. I can also
invoke the EJB from Java stand-alone clients. Struts works great. All is
well with the world. Now I'm trying to "cluster-ize" this app using
the environment described above and encountering issues.
I've read the docs and followed the instructions according to the
"Weblogic Bible" book. I can bring up all 3 servers and the Linux
managed servers connect to the cluster just fine. I can also
see the Struts messages in their logs which normally happens and tells me
the webapp is initialized properly. The console tells me that the managed
servers are running. I get no error messages starting up any of the serves.
Here are the problems I am encountering.
When I try to access the Web Application (through a browser on the
Windows machine using http://localhost) I get the following error message:
<Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
x,admin) found no context for "/". This request does not match the context path
for any installed web applications and there is no default web application confi
gured.>
Also, when I try to invoke the EJB through a stand-alone Java client,
I get a JNDI lookup error on the EJB's home interface.
Questions:
Question1: I noticed when setting up the machines that console lets you
define a "Machine" or a "Unix Machine". What's the difference? Should I
define the Linux machines as Unix machines or machines, and what are the
consequences of either choice?
Question2:
I'm not totally clear on how my web.xml should look to set up Struts,
the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
Here is what I had before I tried to cluster and which works fine:
<filter>
<filter-name>MainFilter</filter-name>
<filter-class>com.refapp.servlets.MainFilter</filter-class>
<init-param>
<param-name>myAttribute</param-name>
<param-value>Foo</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MainFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping
<!-- Struts ActionServlet Configuration -->
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>refappstruts</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>mapping</param-name>
<param-value>org.apache.struts.action.RequestActionMapping</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.do</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
(I have set up a "dummy" 0-length file called index.do that triggers
Struts to go into its ActionServlet when first accessing the web site).
Here is how I added ClusterServlet to web.xml:
servlet>
<servlet-name>ClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
<load-on-startup>0</load-on-startup>
<init-param>
<param-name>defaultServers</param-name>
<param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>InitServlet</servlet-name>
<url-pattern>/servlet/InitServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.html</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
Clearly there is a problem with the Default Web application not being
seen/mapped properly. Any chances my URL mappings for the filter servlet,
Struts, and ClusterServlet are stepping on each other?
With respect to the EJB, here is what my weblogic-ejb-jar looks like:
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Hello</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
<stateless-clustering>
<stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
<stateless-bean-load-algorithm>
round-robin
</stateless-bean-load-algorithm>
<stateless-bean-methods-are-idempotent>
true
</stateless-bean-methods-are-idempotent>
</stateless-clustering>
</stateless-session-descriptor>
<jndi-name>Hello.Home</jndi-name>
</weblogic-enterprise-bean>
I run this through ejbc and package everything up into the EAR file.
However, I get a JNDI lookup failure when I try to access the Bean from
a standalone Java client running on the Windows machine.
Here is the jndi.properties file that I am using:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:80
Any ideas what I'm doing wrong here? I can post config.xml also if needed.
Thanks in advance!
Let me try to answer :)....
A1> No need to name diff machines by default weblogic
considers the servers are physically located in diff boxes.
The names are used to differtiate the mang servers which are in
multihomed
Some things to chk
1> Did u targeted the ear file Target as cluster.
2> Can u see on the Admin console that both the man servers
are participated in the cluster( u can see by clicking the monitoring
tab on the Cluster node).
3>Is the URL:PORT for the default web app correct?
the reason: is I dont see the port# on the link u mentioned
4> probably ur ejb might not been deployed on the target thats the
reason u cant access thru java client. If u correct the targets that
will probably fix it.
Hope this helps
Please post the result
Thanks
Sudhir
[email protected] (Chris) wrote in message news:<[email protected]>...
> Any help appreciated with this situation:
> I'm trying to set up a cluster for the first time and running into
> issues (no big surprise). I'll outline my situation and pose questions
> as they arise. If/when I get things to work I'll post a step-by-step
> summary of what it took to get a simple cluster going.
> Here's what I have:
>
> machines:
> 1 Windows 2000 machines with WL 6.1
> 2 RedHat Linux machines with WL 6.1
> All machines are on the same Home LAN, can see each other, etc.
> IP addresses are:
> Windows box: 192.168.1.100
> Linux box 1: 192.168.1.102
> Linux box 2: 192.168.1.103
>
> servers:
> I've set up the Windows machine as my admin server, and set up
> a managed server on each Linux machine. I created a cluster that consists
> of the 2 Linux machines and deployed the web app and EJB to the cluster.
> The Windows machine is acting as a Proxy using ClusterServlet.
> The web application has been set as the Default Web Application on the
> two Linux machines. All 3 machines are listening on ports 80/443. I also
> set up session memory replication through the console.
>
> Application:
> I have an application that I package as an EAR file. I'm using it as a
> "reference" application designed to mimic a real world app as much as possible.
> The EAR file contains a web application that uses Struts. It also consists
> of a single Stateless Session Bean. The WAR file and EJB Jar are all
> packaged up into the EAR file. I've been able to run this application just
> fine on a single managed server on all 3 machines.
> The web application works fine, and it can invoke the EJB. I can also
> invoke the EJB from Java stand-alone clients. Struts works great. All is
> well with the world. Now I'm trying to "cluster-ize" this app using
> the environment described above and encountering issues.
>
> I've read the docs and followed the instructions according to the
> "Weblogic Bible" book. I can bring up all 3 servers and the Linux
> managed servers connect to the cluster just fine. I can also
> see the Struts messages in their logs which normally happens and tells me
> the webapp is initialized properly. The console tells me that the managed
> servers are running. I get no error messages starting up any of the serves.
>
> Here are the problems I am encountering.
>
> When I try to access the Web Application (through a browser on the
> Windows machine using http://localhost) I get the following error message:
>
> <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
> x,admin) found no context for "/". This request does not match the context path
> for any installed web applications and there is no default web application confi
> gured.>
>
> Also, when I try to invoke the EJB through a stand-alone Java client,
> I get a JNDI lookup error on the EJB's home interface.
>
> Questions:
> Question1: I noticed when setting up the machines that console lets you
> define a "Machine" or a "Unix Machine". What's the difference? Should I
> define the Linux machines as Unix machines or machines, and what are the
> consequences of either choice?
>
> Question2:
> I'm not totally clear on how my web.xml should look to set up Struts,
> the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
> Here is what I had before I tried to cluster and which works fine:
>
> <filter>
> <filter-name>MainFilter</filter-name>
> <filter-class>com.refapp.servlets.MainFilter</filter-class>
> <init-param>
> <param-name>myAttribute</param-name>
> <param-value>Foo</param-value>
> </init-param>
> </filter>
>
> <filter-mapping>
> <filter-name>MainFilter</filter-name>
> <url-pattern>/*</url-pattern>
> </filter-mapping
>
>
> <!-- Struts ActionServlet Configuration -->
> <servlet>
> <servlet-name>action</servlet-name>
> <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
>
> <init-param>
> <param-name>application</param-name>
> <param-value>refappstruts</param-value>
> </init-param>
>
> <init-param>
> <param-name>config</param-name>
> <param-value>/WEB-INF/struts-config.xml</param-value>
> </init-param>
>
> <init-param>
> <param-name>debug</param-name>
> <param-value>2</param-value>
> </init-param>
>
> <init-param>
> <param-name>mapping</param-name>
> <param-value>org.apache.struts.action.RequestActionMapping</param-value>
> </init-param>
> <load-on-startup>2</load-on-startup>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <welcome-file-list>
> <welcome-file>index.do</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>index.html</welcome-file>
> </welcome-file-list>
>
> (I have set up a "dummy" 0-length file called index.do that triggers
> Struts to go into its ActionServlet when first accessing the web site).
>
> Here is how I added ClusterServlet to web.xml:
>
> servlet>
> <servlet-name>ClusterServlet</servlet-name>
> <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
> <load-on-startup>0</load-on-startup>
> <init-param>
> <param-name>defaultServers</param-name>
> <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
> </init-param>
> <init-param>
> <param-name>DebugConfigInfo</param-name>
> <param-value>ON</param-value>
> </init-param>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>InitServlet</servlet-name>
> <url-pattern>/servlet/InitServlet</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>/</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.html</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.jsp</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
>
> Clearly there is a problem with the Default Web application not being
> seen/mapped properly. Any chances my URL mappings for the filter servlet,
> Struts, and ClusterServlet are stepping on each other?
>
> With respect to the EJB, here is what my weblogic-ejb-jar looks like:
>
> <weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>Hello</ejb-name>
> <stateless-session-descriptor>
> <pool>
> <max-beans-in-free-pool>100</max-beans-in-free-pool>
> </pool>
> <stateless-clustering>
> <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
> <stateless-bean-load-algorithm>
> round-robin
> </stateless-bean-load-algorithm>
> <stateless-bean-methods-are-idempotent>
> true
> </stateless-bean-methods-are-idempotent>
> </stateless-clustering>
> </stateless-session-descriptor>
> <jndi-name>Hello.Home</jndi-name>
> </weblogic-enterprise-bean>
>
> I run this through ejbc and package everything up into the EAR file.
> However, I get a JNDI lookup failure when I try to access the Bean from
> a standalone Java client running on the Windows machine.
> Here is the jndi.properties file that I am using:
>
> java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
> java.naming.provider.url=t3://localhost:80
>
> Any ideas what I'm doing wrong here? I can post config.xml also if needed.
>
> Thanks in advance!
-
Beginners guide for netweaver administration
hi ,
i m a basis administrator . next month they r going to put me in a project where xi is implemented .
gurus what are the url's which guides for the sap xi administration
i m very new to xi...so can you also please say me what would be the job role for xiadministrator ?
is that very different from basisrole ?
also if possible guide me for netweaver administration ...
thanks in advanceFirst... download and digest the PI/XI Installation guide from SAP Marketplace.
Then, you can go to the Exchange Infrastructure forum and search there as they have millions of threads like these one.
Regards
Juan -
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM -
BPC 7.5 version for Netweaver on Windows 2008 R2
Hi all,
I am installing BPC 7.5 version for Netweaver on Windows 2008 R2 SP1.
I have completed installation and post installation steps for both ABAP and .Net components.
Now, while executing http://localhost/OSoft i am getting below mentioned error
Error Summary
HTTP Error 401.2 - Unauthorized
You are not authorized to view this page due to invalid authentication headers.
Detailed Error Information
Module IIS Web Core Requested URL http://ides3:80/OSoft
Notification AuthenticateRequest Physical Path F:\PC_NW\Websrvr\web
Handler StaticFile Logon Method Not yet determined
Error Code 0x80070005 Logon User Not yet determined
Most likely causes:
u2022No authentication protocol (including anonymous) is selected in IIS.
u2022Only integrated authentication is enabled, and a client browser was used that does not support integrated authentication.
u2022Integrated authentication is enabled and the request was sent through a proxy that changed the authentication headers before they reach the Web server.
u2022The Web server is not configured for anonymous access and a required authorization header was not received.
u2022The "configuration/system.webServer/authorization" configuration section may be explicitly denying the user access.
Any pointes toward solutions of this error?
Thanks.Yes. Please check Server Manager -> Roles. Find Web Server (IIS) there (not a tree node, but on page), click "Add Role Services" and check that all Security role services are checked. If not - check, install missing role services, try .Net server, if it still doesn't work, reinstall.
Otherwise it would not work. -
Solaris 10 SPARC Recommended Patch Cluster for 2008 quarter 3 version
Dear All,
Could any one please guide me, where I can download "Solaris 10 SPARC Recommended Patch Cluster" for 2008 quarter 3 version.
I have checked in sunsolve.sun.com, I'm able to find only the latest release.
please guide me.
Thanks and regards,
veeraOk,
Here's a cute little formula to try using your systems parameters to gain some "head's-up" on an expected or estimated time to complete the patch run.
You will need a few things to prepare.
Number of "real" CPU's (not hyperthreads)
Speed of each CPU as a whole number i.e 2.87Ghz = 2,867
the total number of patches from the cluster i.e. Sept 15th = 381 (Solaris 10)
Network factor if using NFS = 2.5
local cluster file factor = 1.5
Patch cluster on CDROM factor = 3.25
Now, combine all of those elements in this equation:
{ ( #1 * #2 ) / #3 * factor(#4 or #5 or #6) }
This will yield a number in minutes of patch run time. Then all you will need to add is the standard boot up time to get the total of all patching and reboot.
Of course you could write a script to extract all of this information and feed it to "bc -l" to get a quick figure.
Example, on one of my Solaris 10 boxes with the information filled in to the equation:
#> echo "((4*2660)/381)*1.5"|bc -l
#> 41.88976377952755905511
It actually took 44.2 minutes to complete the patching of this box plus another 12 minutes to reboot. But all in all a pretty fair estimate I think. -
This topic is for to launch a question. Is there ASAP for Netweaver Platform Projects?. I think basically in WAS/Portal projects, with integration via XI to others SAP system; for example, R/3, CRM and APO. Or is there any other SAP methodology for for these projects?
I think SAP Solution Manager is the new methodology for these projects.
-
Failover cluster for BizTalk 2010
Hi friends,
I need to understand step by step configuration for failover for biztalk 2010.
use of failover cluster manager from windows os and how its working from biztalk.
Please do share with me the right url.
Thanks all.Similar question was asked recently in our forum:
http://social.msdn.microsoft.com/Forums/en-US/18239da7-74f2-45a7-b984-15f1b3f27535/biztalk-clustering?forum=biztalkgeneral#4074a082-8459-420f-8e99-8bab19c8fba2
White paper from Microsoft on this context shall you with step-by-step guidance of failover cluster for BizTalk 2010.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2290
Also refer this blog where authors in series of his post guides with the steps required:
Part 1: BizTalk High Availability Server Environment – Preparations
Part 2: BizTalk High Availability Server Environment–Domain Controller Installation
Part 3: BizTalk High Availability Server Environment – SQL & BizTalk Active Directory Accounts
Part 4: BizTalk High Availability Server Environment – Prepping our SQL & BizTalk Failover Clusters
Part 5: BizTalk High Availability Server Environment – SQL Server 2008r2 Failover Cluster
Part 6: BizTalk High Availability Server Environment–BizTalk 2010 Failover Cluster Creation
Part 7 – BizTalk High Availability Server Environment –BizTalk 2010 Installation, Configuration
and Clustering
Par 8 - Adding Network Load balancing to our High Availability Environment
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Microsoft update KB 3002657 and 2008 R2 failover cluster for virtualization
After installing Microsoft update KB 3002657 on my Windows 2008 R2 failover cluster for virtualization, nodes in cluster lost connection to CSV and all my VM's were moved to node owning the volume.
I lost whole day to solve that problem.
But should i keep that update not installed on cluster nodes or anyone maybe has a solution for that ?Hi a3pl,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior from the cluster perspective. Please offer us
more information such as the failover cluster validation error, the failover error event ID, with the current information it is difficult to presume which part may cause this issue, we strongly suggest you install the following update when you use failover
cluster.
Recommended hotfixes and updates for Windows Server 2008 R2-based server clusters
http://support.microsoft.com/en-us/kb/980054
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
CF8/JRun4 Cluster for Load Balancing
Does anyone have an example of how to set up a CF8/JRun4
cluster for load balancing?
I have three servers:
x004 - Linux - Apache2 (10.0.0.54,10.1.0.54)
x020 - Linux - JRun4/CF8 (10.0.0.70,10.1.0.70)
x021 - Linux - JRun4/CF8 (10.0.0.71,10.1.0.71)
Every server in our network has two network cards. One
network card is attached to 10.0.x.x which has a gateway to the
internet and runs at 100Mbps and is firewalled, and the other is
attached to 10.1.x.x which runs at 1Gbps and is internal with no
gateway. I'm trying to set it up so web traffic arrives on
10.0.0.54 into Apache and mod_jrun20 bootstraps a cluster named
STST using 10.1.0.54 which consists of STST_x020 coldfusion server
running on x020 and STST_x021 running on x021. I want the
communications between JRun4 on x020 and x021 to occur on the
10.1.x.x network and eventhough JRun and ColdFusion will only use
the 10.1.x.x network I still need the 10.0.x.x network card
attached for other purposes which require a gateway. I have
installed JRun4/CF8 about 10 times already and it seems I have no
control over what network JRun4 clusters on... sometimes it will
communicate on one, sometimes the other and without being able to
set which network is being used there always seems to be "network
error" on at least one of the two CF8 servers. I was able to get
everything working fine by disabling the network cards on the
10.0.x.x network and re-installing everything... but as soon as I
added the network cards back the whole thing was broken again.
How is this supposed to work? Most of the examples are either
no clustering or clustering on the same machine with Apache running
on the same box... I don't see any clustering across machines
examples.
How do I install a connector on a web server which doesn't
have JRun on it and get wsconfig to connect to a multi-machine
cluster when wsconfig only accepts a single IP address as a host
and the cluster is not listed?
How do I get JRun to bind to a specific network card?
Does this work if I choose a J2EE server other than JRun?
Any help anyone can provide is greatly appreciated. I'm
getting close to giving up which means staying on the non-clustered
environment and figuring out how we can deal with scalability by
switching to something else.The article at
http://www.adobe.com/go/1e8e9170
is specific to configuring two or more cluster nodes that reside on
separate networks, e.g. 10.0.1.0/24 and 10.0.2.0/24. (The article
doesn't state it, but you can only use unicast peers if your
cluster nodes host a single instance of JRun or multiple instances
of JRun in the same cluster domain. When performing unicast
discovery, JRun looks for all Jini groups and not just the cluster
group.)
Anyhow, that's not your problem. The simplest solution is you
haven't enabled the jrun.servlet.jrpp.JRunProxyService service. I'm
most familiar with the Windows version of JRun, but I'm assuming
the directory structure is similar across platforms. In
<jrun_root>/servers/<name>/SERVER-INF/jrun.xml, set the
deactivated attribute of the jrun.servlet.jrpp.JRunProxyService
service to false and restart JRun. You should now see JRun
listening on the appropriate port. (The default for the first
manually created instance is 51000.) You can limit the proxy
service to a single interface using the interface attribute.
If you have enabled the proxy service, verify your security
settings in <jrun_root>/lib/security.properties. It's usually
best to limit access to specific hosts. Comment out the
jrun.subnet.restriction parameter and set the jrun.trusted.hosts to
the IP address of your web server, e.g. 10.1.0.54.
Forcing all JRun processes/services to listen on a single
interface isn't difficult, but it does require modifying quite a
few configuration files by hand. If you need assistance with that,
I can elaborate.
Configuring the JRun module under Apache is pretty
straightforward. If you're not using virtual hosts, it's very
simple. If you are using virtual hosts, it's still simple, but your
JRun configuration can be virtual host-specific.
On your Apache server, you'll want to create a directory
structure for the JRun module. I'll assume
/opt/jrun/lib/wsconfig/1, but you can use anything you want. Once
the directory structure is created, extract the appropriate JRun
module from wsconfig.jar to the new directory. You're most likely
interested in the Apache 2.0 module,
wsconfig.jar/connectors/apache/intel-linux/prebuilt/mod_jrun20.so.
Let's assume you've extracted the module to
/opt/jrun/lib/wsconfig/1/mod_jrun20.so. Your Apache service account
should have read, write, and execute permissions on the
/opt/jrun/lib/wsconfig/1 directory.
The JRun module configuration is normally appended to your
current httpd.conf file by wsconfig. Here's a sample configuration:
LoadModule jrun_module
"/opt/jrun/lib/wsconfig/1/mod_jrun20.so"
<IfModule mod_jrun20.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore
"/opt/jrun/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 10.1.0.70:51000
#JRunConfig Errorurl <optionally redirect to this URL on
errors>
#JRunConfig ProxyRetryInterval 600
#JRunConfig ConnectTimeout 30
#JRunConfig RecvTimeout 30
#JRunConfig SendTimeout 30
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr
.cfswf
</IfModule>
You may also want to update your DirectoryIndex directive
with an appropriate index page, e.g. index.cfm.
After the first request to a page handled by the JRun module
is received, the module will query the boostrap server,
10.1.0.70:51000, for a list of cluster peers. If you've configured
your cluster correctly, a line similar to following will be written
to /opt/jrun/lib/wsconfig/1/jrunserver.store:
proxyservers=10.1.0.70:51000;10.1.0.71:51000
You can create/edit this file manually as well.
Unfortunately, the bootstrap option only accepts one server. If
your bootstrap server is down, the JRun module will use the values
in jrunserver.store directly, if the file exists.
Here's a complete list of JRun module options:
metrics *
debugger *
ssl *
verbose
traceflags
serverstore
bootstrap
errorurl
apialloc
ignoresuffixmap
proxyretryinterval
connecttimeout
recvtimeout
sendtimeout
sslcalist
Options flagged with an asterisk can only be configured at
the Apache server level. All other options can be configured at the
server level and/or the virtual host level. The usage of these
options is in the JRun documentation, and the JRun module source
code is included in wsconfig.jar. Keep in mind that versions of the
JRun module shipped prior to ColdFusion 8 were coded to assign the
connecttimeout and sendtimeout options to the socket connection
timeout. Whichever option appeared last in your configuration ended
up as the final value. This has been fixed in ColdFusion 8 and
presumably the next release of the JRun updater.
I think that's a good start. If you need more information or
can't find what you need in the JRun or ColdFusion documentation,
let me know.
If you're looking for resiliency, I highly recommend
expanding your configuration to include a second web server and a
hardware load-balancer (preferably one that supports redudancy via
multiple paths and devices, e.g. devices from Cisco, F5, or Foundry
Networks). Often, however, running Apache on the ColdFusion
server(s) provides adequate performance, and round-robin DNS
records coupled with the ability to update DNS quickly in the event
of a failure may be all you need for load-balancing and
failover. -
Creating view cluster for a header and detail table
Hi all,
I want to create a View cluster for maintaining 2 tables (one is the header table and other is the detail table)
....for each line in the header table there can be multiple detail line items...
If anyone has worked on such requirement...please tell me how should i go about developing it.
after creation i should be able to maintain the cluster using transaction SM34....
Thanks ,
Sushil.hi
refer to following link
http://help.sap.com/saphelp_nw04/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
Cheers
Snehi
Maybe you are looking for
-
Sharing Only Accounts don't show in Users & Groups
Hi, I've done a fresh install of Maverick yesterday. And I created a "Sharing Only" account so I can access my iMac from another PC (so it doesn't show up at logon time) When I went back in Users and Groups this morning, my newly "Sharing Only" accou
-
I'm trying to combine two collage courses... Problem is I don't really KNOW where to start. I've got this great little java program. I worte it with a total of four files all ending with .java. What I'd like to know is where to look to find out how t
-
How do I stop iTunes from being brought to the front every time I rip a CD?
It used to be that "Hide iTunes Windows" will do the trick. With the new iTunes, it stops doing it. I have over a thousand CD and it is getting annoying having iTunes keep popping up with each CD I put into my computer to get it rip, especially when
-
how can i get a live chat person
-
Hi, I am using the transaction ME23N. My PO looks somewhat like this(Listed only few fileds to make understand the problem). *ITEM A Short text Quantity Order Unit C Delivery date NEt price * 10 K ABC 1