DB Connect- Cant see tables and views in SQL DB

HI,
I successfully managed to connect a MS-SQL DB using DB connect. I am able to connect to the system (Check Connection). When i try to see the Views and Tables available in the SQL DB, it says there are no tables or views available. The SQL DB has granted permission for the SAP User to access certain views and tables. Still it is not showing any. Any help would be appreciated
Thank You

hi,
check things to be followed in oss note 512739
( pdf 'Transferring Data with DB Connect' https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40 )
make sure ...
1. You have to create a special login for the extraction.
You should add this login to the db_ddladmin database role in the corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW' authorization at least. This is contained in the mentioned role.
2. For the extraction, you should only use DB views that were created under this DB user. (See also type conversion, naming convention, and so on).
3. The selected user should be granted the required authorizations (SELECT at least) on the source tables, or on the columns of these tables.
4. The especially created login is to be used in the logon information when you are setting up the DB source system in BW.
hope this helps.

Similar Messages

Permissions disappearing from tables and views in SQL Management Studio

As a CRM person, I sometimes have to update the database to cope with custom reports that I have written. Usually, I will
Go into SQL Server Management Studio 2008
Open the database
Locate either the table or the view
Right click on permissions
Add in the role or user that's needed
Grant them Select permissions
This allows the report in CRM to access the database and this works.
The problem I have is that after a certain amount of time, the user or role will disappear from the permissions meaning that the report will not run. Sometimes, this can be as soon as a couple of days or it can be months. It happens on views more than tables
and, whilst it's not too difficult to put the permissions back, it is annoying for the users.
I don't use SQL Server Management Studio very regularly, only to write a few queries and set up these permissions so I'm not sure if there's anything else in there that might be doing this. All suggestions would be very welcome.
Thanks.

Sounds like some process is removing/resetting permissions periodically
if you are using enterprise edition you could try to catch this using auditing
http://technet.microsoft.com/en-us/library/dd392015%28v=sql.100%29.aspx
otherwise you would need some other custom tracing mechanism (SQL Trace, Extended Events, catching statements.. not fun)
Andreas Wolter (Blog |
Twitter)
MCM - Microsoft Certified Master SQL Server 2008
MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
www.andreas-wolter.com |
www.SarpedonQualityLab.com

Where do i see all the default tables and views in oracle 10g

hi,
I have installed oracle 10g in the linux os.
I just wanna see the list of deffault tables and views created by oracle.
can anyoone hlep me on this
thanx in advance....

Check DBA_OBJECTS for all seeded objects in an Oracle database. For tables, check DBA_TABLES. For views, check DBA_VIEWS. All of this is documented in the fine documentation - take some time out to read thru it.
http://docs.oracle.com/cd/E11882_01/server.112/e25513/statviews_4156.htm#REFRN23146
http://docs.oracle.com/cd/E11882_01/server.112/e25513/statviews_5056.htm#sthref2482
http://docs.oracle.com/cd/E11882_01/server.112/e25513/statviews_5085.htm#sthref2521
HTH
Srini

Tables and views greyout in selection of data source

Hi
I have setup Data Gateway and data sources to a on-prem SQK server in Power BI for Office 365. I have connected to the onsite database but some of the tables and views are greyed-out. The warning relates to the tables not supporting oData but I am not
sure what I need to do from here. Most of the tables are OK and I cant see what would be causing some of them to not be supported.
Please advise
Jason

Generally speaking, there are two possible common reasons.
all columns in table is nullable.
Or you have an unsupported column data type in table. Please check here.
http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/supported-data-sources-and-data-types-HA104149785.aspx?CTT=5&origin=HA104079172

Ora-01219 database not open; only queries on fixed tables and views.

Hi everyone
There is another post stating this error, but since the source is different, I think is okay to make a different post as well.
Our database was working fine until the other day, when suddenly power went off, UPS was damaged and didn't hold, and when we restarted the database this is what happens:
Using Enterprise Manager Console, we can make a succesful connection in the same machine, but if we choose Schema, the following error appears:
ora-01219 database not open; only queries on fixed tables and views.
When accesing from a different machine:
ORA-01033: ORACLE initialization or shutdown in progress
Thanks in advance

Here is the last entries of alert log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 20-JUL-2010 15:48:31
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Fallo de recuperación de credenciales
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Tue Jul 20 15:50:50 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile E:\ORACLE\CRIMINALISTICA\PRODUCT\11.1.0\DB_1\DATABASE\SPFILECRIM.ORA
System parameters with non-default values:
processes = 150
memory_target = 816M
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL01.CTL"
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL02.CTL"
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "E:\Oracle\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=CRIMXDB)"
audit_file_dest = "E:\ORACLE\ADMIN\CRIM\ADUMP"
audit_trail = "DB"
db_name = "CRIM"
open_cursors = 300
diagnostic_dest = "E:\ORACLE"
Tue Jul 20 15:50:55 2010
PMON started with pid=2, OS id=1688
Tue Jul 20 15:50:55 2010
VKTM started with pid=3, OS id=2236 at elevated priority
Tue Jul 20 15:50:55 2010
DIAG started with pid=4, OS id=2332
Tue Jul 20 15:50:55 2010
DBRM started with pid=5, OS id=2328
Tue Jul 20 15:50:55 2010
PSP0 started with pid=6, OS id=2432
VKTM running at (20)ms precision
Tue Jul 20 15:50:55 2010
DIA0 started with pid=7, OS id=2160
Tue Jul 20 15:50:55 2010
MMAN started with pid=8, OS id=2156
Tue Jul 20 15:50:55 2010
DBW0 started with pid=9, OS id=2064
Tue Jul 20 15:50:55 2010
LGWR started with pid=10, OS id=3176
Tue Jul 20 15:50:55 2010
CKPT started with pid=11, OS id=3180
Tue Jul 20 15:50:55 2010
SMON started with pid=12, OS id=3184
Tue Jul 20 15:50:55 2010
RECO started with pid=13, OS id=3188
Tue Jul 20 15:50:55 2010
MMON started with pid=14, OS id=3192
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = E:\Oracle
Tue Jul 20 15:50:55 2010
MMNL started with pid=15, OS id=3196
Tue Jul 20 15:50:56 2010
alter database mount exclusive
Setting recovery target incarnation to 2
Successful mount of redo thread 1, with mount id 1304879008
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 9 - see DBWR trace file
ORA-01110: data file 9: 'E:\ORACLE\ORADATA\STOPCRIM5\STOPCRIM5TABLESPACE.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 16 - see DBWR trace file
ORA-01110: data file 16: 'E:\ORACLE\ORADATA\PRUEBACARLOS\PRUEBACARLOSTABLESPACE.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 17 - see DBWR trace file
ORA-01110: data file 17: 'E:\ORACLE\ORADATA\PRUEBACARLOS\PRUEBACARLOSINDEX.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
ORA-1157 signalled during: alter database open...
Tue Jul 20 16:04:39 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.

Tables and views relevant to concurrent program parameters

I'd like to know all the tables and views relevant to concurrent program parameters.
As far as I know, fnd_descr_flex_col_usage_vl, fnd_flex_value_sets, and fnd_parameters are such kind of tables or views. They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
Thanks in advance!

Hi,
I'd like to know all the tables and views relevant to concurrent program parameters. See these tables:
FND_CONCURRENT_QUEUE_PARAMS
FND_RUN_REQUESTS
FND_CONC_REQUEST_ARGUMENTS
FND_CONCURRENT_REQUESTS
FND_CONCURRENT_PROGRAMS
More details about these tables can be found in eTRM website.
eTRM
https://etrm.oracle.com
> They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
What information you are looking for?
You could get the query executed from the application by following the steps in (Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i) -- Query the concurrent program, then check the value of "SYSTEM.LAST_QUERY".
Regards,
Hussein

Table and views which are afftected during the SAP license post processing

Hi,
can anyone tell me those table and views which are afftected during the SAP license post processing process in SAP 4.7 installation on oracle.
Regards,
Abhishek

hi
there is no table active with the name MLICHECK
the table is not active in the dictionary
what to do now?
i want to see the license data of the sap system now in the table view..............

UKMCRED_SGM0C: Only tables and views are permitted for extraction???

All,
My BI transport got failed (from Dev to QA) with the reason
" UKMCRED_SGM0C: Only tables and views are permitted for extraction" . Can you please help me in this.
Thanks,
Andy

hi Roger,
Could you please provide more details of the transport ... like what was being transported ... from what I see I feel you attempted to transport a generic datasource.. not sure.
Best regards,
Kazmi

Attach User define tables and view table need add to database into my add-o

Hi there,
I want to deploy an addon, there are User define tables and view table need add to database.
I need some advice on some issues..
1. Can I attach User define tables and view table need add to database into my addon.
2. I wonder which chance is properly to add them, if add these user define objects in time of install and I can't get the enough information that connect to SQL server
Thanks for any help.

Hi Weerachai,
Here's an example of how to create a user-defined table in code. My suggestion would be to check if it exists when your add-on starts up and then if not, create the tables, fields and objects.
'User Table
    Private Sub CreateTable(ByVal sTable As String, ByVal sDescription As String, ByVal oObjectType As SAPbobsCOM.BoUTBTableType)
        Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
        Dim iResult As Long
        Dim sMsg As String
        oUserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
        If Not oUserTablesMD.GetByKey(sTable) Then
            oUserTablesMD.TableName = sTable
            oUserTablesMD.TableDescription = sDescription
            oUserTablesMD.TableType = oObjectType
            iResult = oUserTablesMD.Add()
            If iResult <> 0 Then
                oCompany.GetLastError(iResult, sMsg)
                MessageBox.Show("Error Creating Table: " & sTable & " Error: " & sMsg)
            End If
        End If
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
    End Sub
'User Field
    Private Sub CreateField(ByVal sTable As String, ByVal sName As String, ByVal sDescription As String, _
                            ByVal iSize As Integer, ByVal aFieldType As SAPbobsCOM.BoFieldTypes, _
                            ByVal aSubType As SAPbobsCOM.BoFldSubTypes, ByVal sLink As String, _
                            ByVal bMandatory As SAPbobsCOM.BoYesNoEnum)
        Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
        Dim oTable As SAPbobsCOM.UserTable
        Dim iResult As Long
        Dim sMsg As String
        Dim i As Integer
        Dim x As Integer
        Dim bFound As Boolean = False
        Dim oField As SAPbobsCOM.Field
        oTable = oCompany.UserTables.Item(sTable)
        For i = 0 To oTable.UserFields.Fields.Count - 1
            oField = oTable.UserFields.Fields.Item(i)
            'MessageBox.Show(oField.Name)
            If oField.Name = "U_" & sName Then
                bFound = True
            End If
        Next
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oTable)
        If Not bFound Then
            oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            oUserFieldsMD.TableName = "@" & sTable
            oUserFieldsMD.Name = sName
            oUserFieldsMD.Description = sDescription
            oUserFieldsMD.Type = aFieldType
            If aFieldType = SAPbobsCOM.BoFieldTypes.db_Alpha Or aFieldType = SAPbobsCOM.BoFieldTypes.db_Numeric Then
                oUserFieldsMD.EditSize = iSize
            Else
                oUserFieldsMD.SubType = aSubType
                oUserFieldsMD.Mandatory = bMandatory
            End If
            oUserFieldsMD.LinkedTable = sLink
            iResult = oUserFieldsMD.Add()
            If iResult <> 0 Then
                oCompany.GetLastError(iResult, sMsg)
                MessageBox.Show("Error Creating Field: " & sTable & "." & sName & " Error: " & sMsg)
            End If
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
        End If
    End Sub
If you want to create a View I think you would have to use the RecordSet object. This will ensure that you don't have to log in to the database again
Hope it helps,
Adele

The Relation between tables and views in oracle financial

Dears
I am work in oracle e business r12
and i need to build report as xml
when run my select its need big time to view data i have a huge of data so i need to clear the relation of this tables if there is miss and if there another technique in select statement
this is my select statement
select
j_hdr.je_header_id je_header_id,
hdr.VENDOR_NAME supplier,
SEGMENT1||'-'||SEGMENT2||'-'||SEGMENT3||'-'||SEGMENT4||'-'||SEGMENT5||'-'||SEGMENT6||'-'||SEGMENT7||'-'||SEGMENT8||'-'||SEGMENT9 Account_number,
hdr.gl_date gl_date,
j_hdr.CURRENCY_CODE CURRENCY_CODE,
inv_lin.DESCRIPTION DESCRIPTION,
j_lin.ENTERED_DR ENTERED_DR,
j_lin.ENTERED_CR ENTERED_CR,
j_lin.ACCOUNTED_DR ACCOUNTED_DR,
j_lin.ACCOUNTED_CR ACCOUNTED_CR,
j_hdr.JE_SOURCE JE_SOURCE,
j_hdr.DEFAULT_EFFECTIVE_DATE Transaction_DATE,
hdr.INVOICE_NUM INVOICE_NUM,
QUICK_PO_NUMBER PO_NUMBER,
null ASSET_CATEGORY_ID,
hdr.VENDOR_ID VENDOR_ID
from gl_je_headers j_hdr,gl_je_lines_v j_lin,ap_invoice_distributions dist,ap_invoices_v hdr,ap_invoice_lines_v inv_lin
where code_combination_id = DIST_CODE_COMBINATION_ID
and hdr.invoice_id = inv_lin.INVOICE_ID
and dist.invoice_id = inv_lin.INVOICE_ID
and j_hdr.JE_HEADER_ID = j_lin.JE_HEADER_ID
and j_hdr.status = 'P'
and nvl(:P_SOURCE,'Payables') = 'Payables'
and je_source = 'Payables'
and j_lin.CODE_COMBINATION_ID between ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_FROM_COMBINATION_CODE)
and ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_TO_COMBINATION_CODE)
AND TRUNC(dEFAULT_EFFECTIVE_DATE) BETWEEN NVL(:P_FROM_DATE, DEFAULT_EFFECTIVE_DATE) AND NVL(:P_to_DATE, DEFAULT_EFFECTIVE_DATE)
Thanks in advance

Welcome to the world of complicated Oracle Application queries. Didn't fully understand your question, so a few guesses -
I think that you are asking how to make your query faster? I would reference the FAQ section on how to post a question regarding performance.
Your title indicates you want to understand the relationship between tables and views. In general, Oracle Applications uses views for 2 reasons - to join data from multiple tables for display, and to differentiate data from different organizations. (I am still on 11i and have heard organizations are handled differently in 12 so I can't speak to that for sure).
To understand the relationship between tables in a view, you can access the view's source code, either through a development tool such as PL/SQL Developer or TOAD (I'm guessing Oracle's tool does this also, but have never used it), or by querying the source from the dba_source table.
select * from dba_source where name = (name of view) and type = 'VIEW' order by line;without the ( ) just the view name, in all capital letters i.e. , 'GL_JE_LINES_V'
Good luck!

Oracle Internet Expenses related tables and views

In Oracle 11i when we go for internet expenses how to get the table and view details

user12180635 wrote:
Thanks for your reply. But didn't find any Schema or Tables related to Internet Expenses in eTRM. Can any one please specify them.IINM, it should be under AP/APPS schemas.
SQL> select owner, object_name, object_type
from dba_objects
where object_name like 'OIE%';Thanks,
Hussein

How to find all table and views in the database

Hi,
I want to find all table and view name form the database can u tell me syntax.
i.e. I am able to find out table name and view name in sql server ...like
FOR VIEW :
select table_name from information_schema.views where table_name not like 'sys%'
FOR TABLE :
select table_name from information_schema.tables where table_name not like 'sys%' and table_type='Base table'
Thanks & Regards,
Shirish

Hello,
Take a look at "dba_tables" and "dba_views" both of which are documented here:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14237/toc.htm
- Mark

GRANT SELECT to TEMP(by procedure)..... ALL tables and views of OWNER....

hi ,
I want to privelege only Grant SELECT ALL tables,views....
I have written A procedure.....given below....
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ALL_PROC
IS
l_obj VARCHAR2(60);
l_obj_type VARCHAR2(60);
CURSOR Cur_Obj IS
SELECT OBJECT_NAME,OBJECT_TYPE
FROM USER_OBJECTS
WHERE USER ='OWNER';
BEGIN
For i in Cur_Obj Loop
l_obj := i.OBJECT_NAME;
l_obj_type := i.OBJECT_TYPE;
IF l_obj_type IN ('TABLE','VIEW')
THEN
EXECUTE IMMEDIATE 'GRANT SELECT ON' || l_obj ||'TO TEMP’;
ELSIF l_obj_type IN('FUNCTION','PROCEDURE','PACKAGE') THEN
EXECUTE IMMEDIATE 'GRANT EXECUTE ON'|| l_obj ||'TO TEMP’;
END IF;
END LOOP;
END GRANT_SELECT_ALL_PROC;
procedure is working fine.....
OWNER there are some table and views......
But After creation of User name TEMp....
When I m giving GRANT SELECT to TEMP(by procedure)..... ALL tables and views of OWNER....
when I coonecte to TEMP...
Not getting table,view List...
not even data of table or Views.....
can anybdy help me.......advance thanx ...
sanjay

hi ,
I want to privelege only Grant SELECT ALL
tables,views....
have written A procedure.....given below....
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ALL_PROC
IS
l_obj VARCHAR2(60);
l_obj_type VARCHAR2(60);
CURSOR Cur_Obj IS
SELECT OBJECT_NAME,OBJECT_TYPE
FROM USER_OBJECTS
WHERE USER ='OWNER';
BEGIN
For i in Cur_Obj Loop
l_obj := i.OBJECT_NAME;
l_obj_type := i.OBJECT_TYPE;
IF l_obj_type IN ('TABLE','VIEW')
THEN
EXECUTE IMMEDIATE 'GRANT SELECT ON' || l_obj ||'TO
TEMP’;
ELSIF l_obj_type IN('FUNCTION','PROCEDURE','PACKAGE')
THEN
EXECUTE IMMEDIATE 'GRANT EXECUTE ON'|| l_obj ||'TO
TEMP’;
END IF;
END LOOP;
END GRANT_SELECT_ALL_PROC;
procedure is working fine.....
OWNER there are some table and views......
But After creation of User name TEMp....
When I m giving GRANT SELECT to TEMP(by
procedure)..... ALL tables and views of OWNER....
when I coonecte to TEMP...
Not getting table,view List...
not even data of table or Views.....
can anybdy help me.......advance thanx ...
sanjayQuery SELECT * FROM USER_TAB_PRIVS_MADE from the user from which you are executing the procedure
and Query SELECT * FROM USER_TAB_PRIVS_RECD from the TEMP user.

Tables and Views are not displaying any objects.

I have tried both Filtered and non-filtered for tables and view but it won't list any tables or view.
I can run a query and it shows all the tables/views in the query window.
SELECT table_name FROM dba_tables
select view_name from all_views

Who owns the objects?
The browser only shows objects owned by the current logged in user in the main section. You need to go into the Other Users node to find objects owner by other users.

How to search tables and views used in the code of oracle fmb 6i from another form???

Hii guys, this is a very interesting question and i hope that it will have ample amount of answers.
My requirement is to know the number of tables and views and backend functions/procedures which are used in the code written in the oracle forms 6i,
all i want is to display whole views, tables or functions/procedures which are written in the code of a particular fmb, i do have the path of that fmb and i want to read the code and search through it's entire code for the tables/views/backend procedures/functions written in the code. So how to search through the entire code of a particular form (6i) and make it display through another form.
I am using oracle forms 6i.
Please help me out....
With Regards:
Ankit Chandra

Here is a modified dealForm.jsp that merges the 2 steps - both symbol submission and Yahoo convert is done by it. Play with it and add your DB code to it:
<html>
<head><title>IPIB Database Selection</title></head>
<body bgcolor="#DFDFFF">
<H1><CENTER>IPIB Database Selection</CENTER></H1>
<font size=4>
<%@ page language="java" %>
<%@ page import="java.net.*,java.io.*,java.util.*" %>
<%
String symbol = request.getParameter("symbol");
if (symbol != null) {
String urlString = "http://finance.yahoo.com/download/javasoft.beans?SYMBOLS=" + symbol + "&format=ab";
try {
URL url = new URL(urlString);
URLConnection con = url.openConnection();
InputStream is = con.getInputStream();
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line = br.readLine();
StringTokenizer tokenizer = new StringTokenizer(line,",");
String name = tokenizer.nextToken();
name = name.substring(1, name.length()-2);
String price = tokenizer.nextToken();
price = price.substring(1, price.length()-2);
%>
<p>
Original line from yahoo <%= line %>
</p> <p>
Name: <%= name %>
</p> <p>
Price: <%= price %>
</p> <p>
Pub DB processing code from dealLoad.jsp here
</p>
<%
} catch (IOException exception) {
System.err.println("IOException: " + exception);
} else { %>
<form action="dealForm.jsp"method="GET">
<p>Enter Symbol: <input size="20" name="symbol">
<inputtype="submit" value="Submit">
</p></form>
<% } %>
</font>
</body>
</html>

DB Connect- Cant see tables and views in SQL DB

Similar Messages

Maybe you are looking for