DB Connect Data Load Failure

Hello, All,
I am trying to load data from a SQL Server (MS SQL Server 2000)into BW using DB Connect. I have followed all the instructions from note 512739 and also from help.sap.com.
I can look into the database tables and views from BW (all the tables and views are in CAPs). I can even generate a data source for a particular view.
When I schedule an infopackage to load, the message in the monitor indicates the requests: Everything OK, but it shows 0 from O records. The status for the extraction, transfer, and process remains yellow.
I have checked SM21 and ST22, but there are no logs generated by the system. Can anyone help me?
Regards,
Toni

when du generate the view for the DS, did you see data records (by clicking on "display table content".
maybe you could check with your source system?

Similar Messages

Pager from Data Load Failure

Everynight we are loading the data into BW Production system using Process Chains.
When there is data load failure, is there a way we get information on Pager for immediate action.
Suggestions are welcome.

Easiest way (at least the way I've always set it up)is if you have a text pager is have it e-mail the pager. The BASIS team will need to set up the SMTP service in ICM and a job to schedule the e-mails to be sent. You'll also need to set up the e-mail address in the user's SU01 info. There are several notes on how to set this up.
You can also set up a program that pages you but requires an exteral modem to dial up, etc. SMTP service is already there and pretty easy to integrate into your company's e-mail.
-bill
Message was edited by: Bill Smallwood

Data load failure with datasource Infoset Query

Dear Experts,
I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
we had a source system upgrade and when i checked Infoset query in the development of Source sytem im getting the below message :
"Differences in field EKES-XBLNR
Output Length in Dictionary : 035
Output Length in Infoset : 020
Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
I think this will solve my problem,Please correct me if am wrong.
Regards,
Sunil Kumar.B

Hi Suman,
i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
Please help me to correct the same.
Regards,
Sunil Kumar.B

Master Data Load Failure- duplicate records

Hi Gurus,
I am a new member in SDN.
Now, work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
Please help me, I want to fix this issue immediately.
regards
Milu

Hi Milu,
If it is a direct update, you willn't have any request for that.
The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
Check this link for flexible update of master data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Data load failures in Essbase Clusters ( MSCS)

Hi,
If there is a failure on the Active Essbase Cluster Node (call this Node A) and the Cube has to be rebuilt on Cluster Node B, how will the Cube be re-built on Cluster Node B.
what will orchestrate the required activities in the correct order to rebuild the Cube)? Both Essbase nodes are mounted on to Microsoft Clustered Services.
In essential, I want to know
A) How to handle the metadata load that failed on Node1 onto Essbase Node2?
B) Does the session continues to perform the meta data/ data load on the Essbase Second Node when the Essbase First Node fails?
Thanks for your help in advance.
Regards,
UB.

It would be built the same way as you either use the Essbase clustername or the MSCS VIP used for the Essbase cluster configuration, you would not ever be referencing a host name so it does not matter which node it is running on.
The session will be lost on a failover as it is the same as an essbase restart.
Cheers
John
http://john-goodwin.blogspot.com/

Master data Load Failure

Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA   ( Update Subsequently in data targets )
      Data source trasfers no duplicate records
     Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
Nagamani

Hi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards

Initialisation data load failure

Hi all,
My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok.
I am pasting the shrot dump from the source system below.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Last error logged in SAP kernel
Component............ "SAP-Gateway"
Place................ "SAP-Gateway on host hccr3prda1 / sapgw00"
Version.............. 2
Error code........... 242
Error text........... "timeout during allocate"
Description.......... "no connect of TP opti1 from host hccr3prda1 after 22
sec"
System call.......... " "
Module............... "gwr3cpic.c"
Line................. 5709
Thanks

Hi Roberto I have requested the data again twice , but this time the error message is different please could you help me with this.
When attempting to access the data of table "ARFCSSTATE ", an internal error at
the database interface occurred.
but when I check the D/B , it is accessible.
may be I have to debug the flow , can u brief me how to debug the flow from R/3.
Thanks

Error with DB connect Data loading

Dear All,
In my project we have created DB connect data sources and loaded data and it was successful. But now for few fields data type has been changed and after changing the data type when we are trying tol oad the data to PSA, it is showing
"Unknown error while uploading data from the DB table" , "Error occured with source system" etc.
But in DB connect source system their views are running fine from which we are extracting the data.
Please help on the same.
Regards,
SS

Hi,
First i would like to know where the fields data type has been changes in DB side or in BI ?
Try to generate the datasources again
activate the xfer rules and match the Fields type on both side
have a test extraction in BI , Using Display table content of DB View in BI
and check whether its given correct data.
Hope this helps.
Sonal....

Error in the hierarchy structure - Data Load Failure

Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.

hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies

BW Data Load failure

Hi,
I created a BW Data Source in R/3 and checked in RSA3 (R/3) it is extracting the required record...
But when i started data load in BW using that extractor i am geting error message
<b>Request IDoc : Application document not posted</b>
How can i proceed.
Thanks

Hi,
Refer the link:
https://forums.sdn.sap.com/click.jspa?searchID=937834&messageID=2379005
With rgds,
Anil Kumar Sharma .P

Master data load failure. RSRV check resulted in inconsistencies.

Hi...
In our production system, master data load to 0EMPLOYEE is failing every alternate day. When I check the same in RSRV, following checks are red:
1. Time intervals in Q table for a characteristic with time-dep. master data
2. Compare sizes of P or Q and X or Y tables for characteristic 0EMPLOYEE
3. SID values in X and Y table: Characteristic '0EMPLOYEE'
If I repair it, it becomes green and the load is fine. Next day the load fails again. When I check in RSRV, I get the same 3 errors. So, again I need to repair it. Let me know the permanent solution for this.
I ran the programs: RSDG_IOBJ_REORG and RSDMD_CHECKPRG_ALL but these fixes are also temporary. Moving a new version of the object from Dev to QA and then to Production is not preferable right now as this involves a high amount of visibility.
I know the SID tables and all are corrupted from the logs I see. But is there any permanent solution for this without transports?
Thanks,
Srinivas

Hi
Chk this link will help you: Master data deletion
Regards
Ashwin.

Data load failure with '#'

Hi Experts,
One of our data load is failing with special characteristic '#'.
The exact error records is as follows: 390-166333#New, SUB, Fan 80x80x80mm, 12
We have maintained '#' in RSKC, but still the load is failing.Any reason ?
After editing '#' in PSA and reload fixed the issue.
Can anyone suggest what should be done to fix this.
Thanks & Regards,
Naveen.

Hi,
try below field level routine.
DATA: l_d_length like sy-index.
DATA: l_d_offset LIKE sy-index.
DATA: CharAllowedUpper(60) TYPE C.
DATA: CharAllowedLower(60) TYPE C.
DATA: CharAllowedNumbr(60) TYPE C.
DATA: CharAllowedSondr(60) TYPE C.
DATA: CharAllowedAll(240) TYPE C.
CharAllowedUpper = 'ABCDEFGHIJKLMNOPQRSTUVWXYZÄÜÖ'.
CharAllowedLower = 'abcdefghijklmnopqrstuvwxyzäüöß'.
CharAllowedNumbr = '0123456789'.
CharAllowedSondr = '!"§$%&/()=?{[]}\u00B4`*+~;:_,.-><|@'''.
CONCATENATE CharAllowedUpper CharAllowedLower CharAllowedNumbr
CharAllowedSondr INTO CharAllowedAll.
RESULT = SOURCE_FIELDS-ENTITYNAME.
l_d_length = strlen( RESULT )
IF NOT RESULT CO CharAllowedAll.
DO l_d_length TIMES.
l_d_offset = sy-index - 1.
IF NOT RESULT+l_d_offset(1) CO CharAllowedAll.
RESULT+l_d_offset(1) = ''.
CONDENSE RESULT NO-GAPS.
ENDIF.
ENDDO.
endif.
CONDENSE RESULT NO-GAPS.
TRANSLATE RESULT TO UPPER CASE.
Thanks,
Phani.

Data load - Failure Scenarios

Can anyone please explain in detail on how to handle this DATALOAD issues. I would like to understand for following scenario in BI 7.0 and R/3 4.6c
1) R/3 --> PSA --> DSO --> CUBE
So, there are one infoPackage and 2 DTP's are involved.
Let us take take a scenario, Please explain me in detail (Steps), on how to fix the LOAD, if the LOAD failed in R/3 --> PSA or PSA --> DSO or DSO --> CUBE.
I would appreciate your help in advance and points will rewards, of course.
BI Developer

Hi.......
1) Generally load fails in R/3 --> PSA due to RFC connection issue......You can check the RFC connection SM59.....
If it fails........you can make the status red.....and delete the failed request from PSA........again load it........
2) Load from PSA to DSO may fail due to many reasons....
a) Lock issue...>> in this case you can check the lock in SM12........wait for the lock get released...........then make the QM status red......delete the request from the target..again repeat the load............
Or may be due to locked by change run........in this case also after the completion of ACR....you have to repeat the load..
b) load failed because last delta failed.........In this case first you have to rectify the last delta.........then repeat this load....
3) DSO --> CUBE.........a)here also the load may fail due to lock issue...in this case also you have to delete the request from the target.after making the QM status red........then lock get released you have to repeat the load.......
b)while loading data from DSO to infocube , the dtp run failed due to short dump.The error anlysis gives description as DBIF_RSQL_SQL_ERROR,
This error is usually seen when the table behind ODS is getting updated from more than one source system simultaneously. Here the data packets from more than one request contain one or more common records. This gives rise to deadlock while updating inserting records into the ODS table and subsequently a short dump is encountered leading to the failure of one request. The solution is to cancel the loads and run them serially. A possible long term solution is to load the data up to the PSA in parallel and then load the ODS table from the PSA in serial. (Here change the InfoPackage to option PSA only and tick Update subsequent data targets).
Solution
It may be possible that the job is set up in such a way that the activation of data in the ODS takes place only after data is received from all four regions. Thus, if the failing request is deleted the correct requests will also be deleted. Hence it is required to change the status of the failed job from red/yellow to green, activate the ODS data and then re-start the load from the (failing) source after correction of any possible errors.
c) while loading the active data that is in the first ODS into a cube - it fails with the following error.
err #1 )Data Package 1 : arrived in BW ; Processing : Error records written to application log
err #2 ) Fiscal year variant C1 not expected
Sol : 'GO to SPRO, SAP Customizing guide
Open the tree:
SAP Netweaver
SAP Business Information Warehouse
Maintain FIscal Year Variant
Hope this helps you.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Sep 24, 2008 8:47 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:53 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:54 PM

Data Load failure

Hi all,
when I am loading a data it is failinf and throwing a error as "error in data selection" ... is I have to check in r/3 system and how to do that?
regards,
Nandini

Hi.....
Go to the Status tab of the IP monitor.......and check the detail message.........
1) It may fail due to time out..........if so then reduce the data packet size >> In IP scheduler >> Sceduler tab >> Change the data packet size there......
2) If it is due to RFC connection .........then check the RFC connection in SM59.......
3) If it failed due to Replication error : Then replicate the datasource again............then activate the transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
It may be failed due to other reasons also..........just check it...
Regards,
Debjani......

DB Connect Data Load Failure

Similar Messages

Maybe you are looking for