DB connect datasource not showing new fields on proposal tab please help

Hi Experts,
We have a Datasource to a SQL view, we recently added new fields to the view, but they are not showing on the proposal tab, we can preview data (no new fields there either), we verified the connection and everything seems to be just fine but the new fields are nowhere to be found, we even created a new datasource for that view and the new fields are just not showing.
Can someone please help me with this?
Thanks in Advance.

Not even sure if anyone is looking at this anymore - I have a similar issue and haven't solved it using SAP standard - instead I have been using the workaround as follows.
Add the field(s) and details to table RSDSSEGFD Once done here reactivate the datasource.
* Proceed at your own risk * *
/MiB

Similar Messages

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling

Bootcamp is not showing install windows 7 usb option please help

bootcamp is not showing install windows 7 usb option please help

Tom von Mom wrote:
So MacBook Pros with DVD players doesn't support booting from USB stick?
They don't support booting Windows from a USB stick.

Datasource not showing new client in the dataflow after migration.

Hi Experts,
We have connected our BI DEV system to new ECC DEV Client 203. Earlier the connection was with 201 CLNT. We have replicated and activated the datasources from the new system to BI. At RSA1, all the datasources are now showing CLNT 203 but some of them are still showing CLNT 201 at the dataflow (at the infoprovider). I have executed BDLS several times but still facing the same problem.
Kindly suggest the solution.
Edited by: prateekj on Oct 21, 2009 4:40 PM
Edited by: prateekj on Oct 21, 2009 4:41 PM

OK
Go throught this note
Note 325470 - Activities after client copy in BW source systems
hope your problem will be sloved
and also check the simillar link which can support your issue
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/bdls-597594
santosh
Edited by: Santhosh Nagaraj on Oct 21, 2009 8:29 PM

Mountain Lion 10.8.2 not showing big folders from External HDD, please help ?

Hello guys,
The problem appeared after I did a clean install of Mountain Lion 10.8.2. The OS works nicely except it does not show my big Movie (around 200 GB) folder from my External HDD. This Movie folder is not related to any Apple software such as iTunes etc.. What's funny is that my LG TV shows the folder, and I can access it to open any movie. But when I mount the HDD to my MacBook Pro with Mountain Lion now, all folders are shown except this one. The HDD is NTFS and had no problems with Snow Leopard (my previous OS).
I tried defaults write com.apple.finder AppleShowAllFiles TRUE and I see hidden folders in External HDD, but the Movie folder is still not shown.
Is this issue related to the size of this folder ? any help & ideas are greatly appreciated, thanks!

Hi all,
I see its been 2 months since the last post. Did someone find the solution? I have the same problem with 10.8.2 update. Macbook pro mid 2010 with Crucial 256 m4 ssd (latest firmware 010G). Since yesterday my mac refuses to start.
What I did so far:
1. Impossible to start os x 10.8.2, stuck at spinning circle below the apple logo at startup. Disk check ok, permissions ok. Startup in "safe mode" stucks on spinning wheel as well.
2. Impossible to format the drive for a new clean install. What I find strange is that I cannot format the ssd with any utility. So far I tried with windows, linux and with disk utility on os x. I put the ssd in a usb casing and I am able to read it as an external drive, can copy some smaller files from it but cannot change anything on it (no permissions).
3. Did a clean install on original hd of my mac. Data transfer (1 user) from time machine or the ssd goes through 85-95% then stops. And now impossible to format the original drive with the 10.8.2 installed to downgrade to 10.7.
4. Pram reset
Does anyone have any idea what to do now?
Thanks!

Masked pre comp of clip not showing clip motion within the mask please help

Hi there,
I'm trying to create a phenakistoscope Phenakistoscope - Wikipedia, the free encyclopedia out of a motion picture of a dancer.
I've transformed the clip of the dancer and precomposed it and then masked and animated the rotation of the pre comp in a new composition. I then duplicated the now animated pre comp 20 times offsetting each one, a frame later than the last to create the wheel effect with trailing frames.
The animation of the mask and offset is working fine, however the footage in the clip is not playing in the masked composition.
please help, here is the project file. Dropbox - caropheankistope.aep
RAW FOOTAGE SAMPLE Dropbox - carolina base_raw sample.mov
NON WORKING COMP SAMPLE OUTPUT Dropbox - carolina base_sample.mov
Thanks
adam

I'm replying to your question on my phone so I can't look at your project but I did look at your video.
Here is what I would do to troubleshoot the project. First run a RAM preview of the pre-composed and masked wedge comp. If that plays back correctly then everything else should work unless you have applied some kind of time effect to the duplicated layers. If that doesn't work then show us a screenshot of that pre-comp with all of the properties of the movie layer revealed (Press that u key twice).
If you have not sorted this out by the time I get back the office I will try and take a look at your project.

IPod Touch will not show up in iTunes...Please Help

Here is what I know/can remember. My iPod has not worked in 3 months! Not sure at what point it stopped but it worked fine for a year. Now when I plug it in it charges just fine just will not show up in iTunes. Sometimes it shows up as an unknown device on my computer and in the hardware device section shows up as unknown device. Thats all I got. I have tried all kinds of troubleshooting. I have took each little peice off and then reinstalled numerous times. I have even restored my computer back to square one. Still not working! I want to cry. I just want to listen to my podcasts again. They are downloading into Itunes just can't get the Ipod Touch to show up in iTunes...willing to try anything! Please help if you can! I have a 16GB and use XP with SP3. I assume all my hardware is good to go since it worked before and it charges through the USB port!

Welcome to the discussions,
here are some general troubleshooting tips to go through, maybe you missed one suggestion. http://support.apple.com/kb/TS1495 They range from using the assistant up to USB driver installation, Apple Mobile Device Service and checking for available BIOS updates.

ITunes will not add new songs to iPod. Please help!

Hello, my problem is pretty self-explainitory. I have the newest versions of itunes and ipod. When I plug in my ipod it "updates" it fine but once its done the new songs/artists/albums/playlists are not on my ipod.
Please help.
Matthew.

oh my gosh that is like the same thing that happened to me! i just downloaded itunes 7.0.2 yesterday and i bought some new songs and downloaded songs from cds into my library. i clicked "sync ipod" and the songs i downloaded from cds were the only things that went on!!!none of the songs i bought from itunes store went on my ipod!
i made sure i checked them and everything! they just won't go on my ipod!
Dell Dimension XPS T450 Windows XP

Activation Codes not showing up on XBR65X950B or FMPX10 please help sony support unhelpful

I've been diverted over 6 different support teams and no one has been able to even be able to address this problem. I am trying to register my TV and media player in order to purchase movies on the Sony Entertainment Network. Please help as Sony's lack of customer service call centers have not been able to even address the question.

Hi amsjmuskal,
Welcome to Sony Community!
Please try perform the steps below to locate the registration code on the Internet video device:
Using the supplied remote control, press HOME.
Use the up arrow or down arrow button to select Applications.
Select Sony Entertainment Network icon and press OK.
Select Activate Enhanced Feature and press OK.
Select Open.
The registration code appears on screen.
NOTE: The Registration code will not appear once the service has been registered.
Thanks!
Jerome
If my post answers your question, please mark it as "Accept as Solution"

My Flash Player will not show the images. Will someone please help me?

I am trying to make a Presentation to email for others to see without a browser, but when I do, it doesn't show. I've downloaded Adobe Flash Player 10.0 r22, I've built the presentation, I've published the presentation and uploaded to my hosting. I have tried everythiing I can think of. It works on my machine; however, when I try to view it out of it's containing folder, it doesn't show anything but the preloader. Can someone please help me?
I can send you an example of a working Presentation along with a Zip file containing my presentation with everything I've built if my explanation isn't quite clear. Please help.
Thank you,

Didn't you ask that same question yesterday in this same forum?

Have downloaded my library from a portable hard drive to itunes but not showing in library on home site please help windows 8

trying to download music from portable harddrive and wont go to I tunes library saving as I tunes link. working on windows 8..... Please help

I'm not sure if iTunes will like to run those files if they're on an external drive. Honestly I've never tried. Have you tried dragging a few songs, maybe an album, into your 'music' part of your drive, then try to import them into iTunes?
I moved computers a couple of months ago and that's waht I did, saved my music to a portable drive, then dragged it back onto my C drive and into the music folder, then imported it into iTunes.

Photos not showing up in recipient's email-Please help

I have been using iphoto '08 without problems. Today I decided to try for the first time to send an email to my brother with recent photos. In iphoto I highlighted 4 photos to send, clicked the email icon at the bottom right of the window, chose my file size, composed my message, and hit send.
My brother replied that he got the email, but instead of seeing the photos, all he could see were the photo file names (DCSN 145, etc.). I tried 3 different times to resend--each time making the photo file size smaller and smaller (he thought maybe the files were too large for his network). This did not work.
Finally, as FYI, I initially tried sending the photos to him by composing a new message using the Mail program and then choosing a stationary template. I dragged photos to the template, composed my message, and hit send. He wrote back saying that he got the message but the photos were blank. It was at that point that I decided to try and email the photos directly from the iPhoto program (and ultimately to no avail). When I look back at my Sent emails, I can see the emails sent to my brother and the photos do indeed show up in them.
Ideas??????? Thanks.

At a guess you had the Size drop down in the Mail window set to small.
Uploaded with plasq's Skitch!
Regards
TD

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

Mail not showing new messages on 10.8.3

Mail not showing new messages on 10.8.3, but messages show just fine on iPhone. Nothing changed to make this happen, not sure where to start. Thanks.

Back up all data.
Select the problem mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar.

DB connect datasource not showing new fields on proposal tab please help

Similar Messages

Maybe you are looking for