DB Connect MS SQL Server

Hi all:
   I´m trying to connect to MS SQL Server DB, trought DBCO transaction, filling data such a:
   DB Connection: MY_CONNECT
   DBMS: MSS (SQL server)
   USER: my_user
   PASS: my_password
   CONN. INFO: ("MSSQL_SERVER=xxx.xxx.xxx.xxx MSSQL_DBNAME=my DB name)"
   PERMANENT: X
   CONN. LIMIT: 0
   OPTIMUM CONN. 0
   But system returns me the follow message in the log:
   "BY2 - Database error 0 at CON"
   Have anyone done this before?
Thanks in advance.
Abel

Hi Abel,
If your BW is on a non SQL Server, then you need to install the SQL server client software and the DB shared library on the BW Application server.
(ii) If both you BW and external database are on SQL. Make sure that the SQL server version on BW is higher or equal to that on your external database.
(iii) If the above 2 steps have been followed and inspite of it you are facing with the connectivity error, here's what I would suggest.
a) Make sure that the SQL server connection information (IP Address, Port number and SID) have been maintained correctly on the tsnnames.ora file on the BW server (On Development server, if you are working on Dev environment).
b)On the screen for "Description of Database Connections", enter the connection name.domain name.
For example lets say the connection name give by the external DB admin is SAMPLEBW. So enter SAMPLEBW.US.XXX.COM
where US.XXX.Com is the domain name and SAMPLEBW is the name for the connection information.
Hope this helps.
Regards,
P.S

Similar Messages

How do I connect to SQL Server with Muse?

I want to query items from database and load it back to front end. Is there a way Muse can connect to sql server database?

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

How can I Connect to SQL Server or other RDBMS like Sybase from Form 6i

I want to connect Connect to SQL Server or other RDBMS like Sybase from Form 6i. I kniow that I need some gateway product but I don't know the name of the product?Can i use some other technology to do the same like client software etc.
I need this help urgently?

Check the following link.
http://www.oracle.com/technology/products/gateways/index.html

How can i connect to SQL Server 7.0 on Windons Using JDBC

How can i connect to Microsoft SQL Server 7.0 on a windows enviroment ?
in sql server 2000 some jar files are required that is
What you need to do is actually add all three jar files to your class path individually. There are three jar files that come with this driver the msbase.jar, msutil.jar, and mssqlserver.jar. for sqlQ server 2000.
now the problem is that i cant find these files on my system. firstly where these files will be located. secondly are they will be used to connect to SQL Server 7.0. thirdly if not what is the procedure.
My next Problem is that I have Websphere Studio Application Developer. in which their is this facility of Database Webpages its like a wizard which makes automatically beans servlets and JSP but before that you need a Driver Name and and Class Name for to Connect to the Database.
Can you tell what is the specific Driver Path for the Microsoft SQL Server 7.0 . secondly is this the class which is used to connect to SQL server 7.0 "com.microsoft.jdbc.sqlserver.SQLServerDriver" where can i find this one. for SQL server 7.0.
please provide some guidance in this regard.

You can search for the JDBC drivers at, http://industry.java.sun.com/products/jdbc/drivers
All the three jars that you specified are part of MsSQL Server jdbc driver. You need them (in the classpath) to get connected to the database.
"com.microsoft.jdbc.sqlserver.SQLServerDriver" is the class in mssqlserver.jar. This is the driver class which will be used to get connected to the database.
You can search in this forum for writting jdbc code (for Sql Server). If you don't find these jars, give me your e-mail id.
Sudha

How can I connect to SQL Server CE?

Hi!
How can I connect to SQL Server CE ?
Any idea?
I found jdbc driver for SQL Server 6.5,7.0,2000.
But no driver for SQL CE.
Thanks for any suggestion....

I am also searching for same answer.
I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
I am stuck in driver problem. I can't find that.
Should I use Oracle Lite or PointBase?
I am under a lot of stress... like you've been...
I wish you find and post that....

How do i connect to sql server using java?

hi ever body
i need to connect to sql server using java
what is the driver i will use?
thanks

Microsoft make a jdbc driver and it is readily available through MSDN. Here is a link http://msdn2.microsoft.com/en-us/data/aa937724.aspx. Whatever jdbc driver you are looking for, Google it, and if it exists you'll find it in 10 seconds.

How do i connect to sql server 2012 from cmd .

Hi ,
I Installed sql server 2008 R2 and 2012 Express and sql server2014 . I can conect to sql server 2008 R2 using
SQLCMD -L command .
How do i connect to sql server 2012 express edition from cmd .
Any Hep appreciated
Thanks in advance,
Shravan

I HAVE ANOTHER INSTANCE NAMED TEST WHEN I USE THE COMMAND IT GIVES ME THIS ERROR
HOW TO RECTIFY
C:\Users\HP>SQLCMD -S HP-HP/TEST
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Named Pipes Provider: C
ould not open a connection to SQL Server [67]. .
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or in
stance-specific error has occurred while establishing a connection to SQL Server
. Server is not found or not accessible. Check if instance name is correct and i
f SQL Server is configured to allow remote connections. For more information see
SQL Server Books Online..
PLZ HELP

Connectivity with sql server

Dear community members;
I am using Oracle 10g DB. Now I want to connect with SQL Server 2005. Is there any possiblity for connectivity. Because we have to pick some data from sqlserver on online transaction entry time.
Waiting for usefull response.
Thanks
Shahab Ahmed Khan

I am using oracle 11gR1 on windows 2003.
This is my initaccessdb.ora(Path HS/ADMIN)
HS_FDS_CONNECT_INFO = ACCESSDB
HS_FDS_TRACE_LEVEL = OFF
Listner File
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM=extproc)
     (SID_DESC =
     (SID_NAME = accessdb)
(ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM = ACCESSDB)
     (ENVS=LD_LIBRARY_PATH=D:\)
TNSNAME.ORA
ORCL =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
     (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME= ORCL)
ACCESSDB =
(DESCRIPTION=
     (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
          (CONNECT_DATA =
          (SERVICE_NAME=ACCESSDB))
               (HS = OK)
I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> conn ahmed
Enter password:
Connected.
SQL> drop database link test;
Database link dropped.
SQL> create database link test using 'ACCESSDB';
Database link created.
SQL> SELECT * FROM EMPLOYEE@TEST;
SELECT * FROM EMPLOYEE@TEST
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from TEST
Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
Thanks

Connecting with SQL Server

Dear All,
I m new to JDeveloper and want to make a connection with SQL Server 2008 but in Connection Dialogue with following Settings :-
Connection Type: SQL Server
UserName: sa
Password: ******
HostName: EServer
DatabaseName: DBName
PortNumber: 1430
Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
Library:
As I Press Test Connection it gives following error:
Test failed: Driver class not found.
Verify the Driver location
Pls suggest

Download sqljdbc.jar and Add it to the Viewcontroller Libraries and Classpath (Project Properties of ViewController)

Sql developer won't connect with SQL server database on cluster

Hello,
I have a microsoft SQL server database on a windows cluster. Name for this cluster is like XXX/YYY
When I try to connect to this database with SQL developer, I get a failure, mentioning:
"Status : Failure -Cannot connect to Miscrosoft SQL Server on XXX/YYY"
As far as I know, I have installed the correct jtds driver (version 1.2.5), since I can connect to sql server databases on single server hosts.
Does anyone know how to connect to databases on windows clusters?
Edited by: Ingmar on Jan 16, 2012 4:08 PM
Edited by: Ingmar on Jan 16, 2012 4:22 PM

Hi Ingmar,
Try this is in the port box
1433/dbname;instance=YYY
dbname can be omitted
-Turloch
SQL Developer team
1/Giving an instance name in SQLDeveloper connection to SQL Server (from August 2011)
MS SQL Server Connection
The correct syntax to deal with this is in the port box
1433/dbname;instance=instance
dbname can be omitted
2/cluster configuration (uses instance name)
http://stackoverflow.com/questions/1160024/jdbc-connect-string-for-sql-server-cluster
where vvv\iii is the cluster address: jdbc address is:
"jdbc:sqlserver://vvv;instanceName=iii"
3/jtds url details available in
http://jtds.sourceforge.net/faq.html

Azure Webjobs with EF DB - A network-related or instance-specific error occurred while establishing a connection to SQL Server

Hi,
I have been trying to get a very simple WebJob developed and deployed onto Azure with little to no luck. I have a MVC Website which has a common project which handles my Data Access Layer with Entity Framework. I have created a WebJob project
using Visual Studio and added the following lines of code to the Manual Trigger Function
[NoAutomaticTrigger]
public static void ManualTrigger(TextWriter log, int value, [Queue("queue")] out string message)
RitualDBEntities db = new RitualDBEntities();
log.WriteLine("Function is invoked with value={0}", value);
List<Location> locations = db.Locations.ToList();
string msg = string.Empty;
foreach (Location location in locations)
msg += location.Name;
message = msg;
log.WriteLine("Following message will be written on the Queue={0}", message);
In my app.config of my WebJob i have the following connection strings:
<add name="RitualDBEntities" connectionString="metadata=res://*/RitualDBEntities.csdl|res://*/RitualDBEntities.ssdl|res://*/RitualDBEntities.msl;provider=System.Data.SqlClient;provider connection string="data source=ritual-pc\sqlexpress;initial catalog=RitualDB;integrated security=True;persist security info=False;MultipleActiveResultSets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
<add name="RitualContext" connectionString="Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RitualDB;Data Source=ritual-pc\sqlexpress" providerName="System.Data.SqlClient" />
<add name="AzureWebJobsDashboard" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****"/>
<add name="AzureWebJobsStorage" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****" />
When i test locally (F5 Debugging) the webjob runs successfully and does the loop of the objects returned from the database. When i deploy this Azure the WebJob fails with the following error:
[03/29/2015 22:07:39 > 6ca05b: SYS INFO] Status changed to Initializing
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Run script 'Ritual.WebJobs.Members.exe' with script host - 'WindowsScriptHost'
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Status changed to Running
[03/29/2015 22:07:44 > 6ca05b: INFO] Found the following functions:
[03/29/2015 22:07:44 > 6ca05b: INFO] Ritual.WebJobs.Members.Functions.ManualTrigger
[03/29/2015 22:07:44 > 6ca05b: INFO] Executing: 'Functions.ManualTrigger' because This was function was programmatically called via the host APIs.
[03/29/2015 22:08:01 > 6ca05b: INFO] Function had errors. See Azure WebJobs SDK dashboard for details. Instance id is e99d7205-3ca0-4674-9414-f0381d5c2316
[03/29/2015 22:08:01 > 6ca05b: ERR ]
[03/29/2015 22:08:01 > 6ca05b: ERR ] Unhandled Exception: System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.<Open>b__36(DbConnection t, DbConnectionInterceptionContext c)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext](TTarget target, Action`2 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.Open(DbConnection connection, DbInterceptionContext interceptionContext)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.<Open>b__2()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute(Action operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of inner exception stack trace ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection(Boolean shouldMonitorTransactions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClass7.<GetResults>b__5()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<System.Collections.Generic.IEnumerable<T>.GetEnumerator>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Internal.LazyEnumerator`1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Functions.ManualTrigger(TextWriter log, Int32 value, String& message)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at lambda_method(Closure , Object[] )
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.VoidInvoker.InvokeAsync(Object[] arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithWatchersAsync>d__23.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithOutputLogsAsync>d__1c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<TryExecuteAsync>d__1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.ExceptionDispatchInfoDelayedException.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.<CallAsyncCore>d__7.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.Call(MethodInfo method, Object arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Program.Main()
[03/29/2015 22:08:01 > 6ca05b: SYS INFO] Status changed to Failed
[03/29/2015 22:08:01 > 6ca05b: SYS ERR ] Job failed due to exit code -532462766
If i remove any of my database code and use just the basic Stub code my webjob will run successfully so i know that my connection strings (outside of the DB ones) are correct. My MVC web application also runs perfectly using the same connection strings
in Azure so i also know that they have also been configured.
I am now lost and need some guidance, so if someone is able to assist me that would be much appreciated.
Thanks
Ritual.

Can you try to log the connection string you are using in both cases to make sure they are the same?
Also can you share your site name, either directly or indirectly?
This will help us investigate.
Thanks,
Amit

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

A network-related or instance-specific error occurred while establishing a connection to SQL Server.

Dear all,
I know that this topic may be a bit old school; but it really make me mad as I tried all solutions i found and it still cant be resolved....please give a hand...
The situation is like this,my company divided different platform as a status of project, like DEV, SIT and UAT. I got a project that require me to upgrade an vs2003 project to vs2005. I upgraded it completely and
successfully, it works fine in development and UAT platform; EXCEPT, the SIT platform.
The situation is very strange that, once I move the source to SIT, it return the following error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
but it never happen in either DEV or UAT platform and even do I copy the workable web.config from DEV or UAT platform to SIT, the error still here and unable to resolve it.
I search a lot in the internet by Google, but solution suggested are not suitable or fail in my case. Most answer suggest that "enable remote control", "check fire wall", "check server" etc......But as I can connect well the
DBServer in DEV and UAT properly, I dont think those are the cause(but still, I check them all, and all are enabled properly, except my firewall setting is OFF, so adding port is ignored).
After all the searching and testing, I believed and have reason to believe that, the cause is inside my web.config:
<appSettings>


<clear/>
<add key="Environment" value="UAT v1.31"/>
<add key="DBServer" value="DB_UAT"/>
<add key="cnBPSS.ConnectionString" value="data source=DB_UAT\BPSS;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096;pwd=theloginpwd"/>
<add key="UTBPSSConn.ConnectionString" value="data source=DB_UAT\BPSS;persist security info=False;user id=theloginid;workstation id=RP_UAT;packet size=4096;pwd=theloginpwd"/>
<add key="UTDSBDBConn.ConnectionString" value="workstation id=RP_UAT;packet size=4096;user id=theloginid;data source=DB_UAT\DSBDB;persist security info=False;password=theloginpwd"/>
<add key="cnDSBDB.ConnectionString" value="workstation id=RP_UAT;packet size=4096;user id=theloginid;data source=DB_UAT\DSBDB;persist security info=False;password=theloginpwd"/>
<add key="Timer1.Enabled" value="True"/>
<add key="Timer1.AutoReset" value="True"/>
<add key="cnbpss.ConnectionString" value="data source=DB_UAT\BPSS;password=theloginpwd;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096"/>
<add key="cnbpss1.ConnectionString" value="data source=DB_UAT\BPSS;password=theloginpwd;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096"/>
</appSettings>
</configuration>
I know such kind of setting is old school; But due to this program runs for few years from tons of ppl...I dont dare to modify it unless I am very sure they are the cause.....
May I ask if anyone cna give me some advice and help in this issue please? I already tried for weeks and turning mad....Please I really need some help...
Many thanks.
Ksun Chan

Checklist of possible reason of this error
1. Check SQL services are running
2. Check SQL Browser service is running
3. Check remote connections are enabled
4. Network connectivity between database & application servers by TRACERT command
5. Check TCP/IP protocol enabled at SQL server
6. Check talent connectivity – telnet <IP address> <port no on SQL server running>
7. Check UDP port 1434 is open or not on SQL Server
8. Check firewall is running or not Check
9. If firewall running, SQL Server & UDP port must be added in exception in firewall
Regards,
Rohit Garg
(My Blog)
This posting is provided with no warranties and confers no rights.
Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

DB Connect MS SQL Server

Similar Messages

Maybe you are looking for