DB Connect Simple question

Hi pLEASE tell me where can i PUT THE INFORMATION PROVIDED BY database administrator of the external application WHO provides the user name, password, and connection information. i NEED to put the connection information into a file called tnsnames.ora on the Oracle database server on the BW side. How to reach this tnsnames.ora file what are the steps to reach the file please help i need to edit the file to put the port and sid and ip info there. how to edit this file. please help me soon
thanks
soniya

Soniya,
You have to access the file through the server. It should be in the oracle root directory under network\admin.
From the server, just search for the file. There is a sample entry in it.
Aneesh

Similar Messages

This might be a simple question. On those sites that do not differentiate between models when on the internet I.e. Facebook when after your comment and you cannot hit "enter" on an iPad for examp. And speed is slow to connect. What is = to post?

This might be a simple question. On those sites that do not differentiate between CRT, laptop, tablet etc. such as an iPad Mini and using the Facebook site fir example when going to post a comment and you do not have a enter button on the IPad and the speed is slow how do you get your comments to post if we do not have a enter button?
<Email Edited By Host>

I don't have facebook so I cannot answer but for your personal security, I have asked the hosts to remove your e-mail address. It is very unwise to publish this.

Simple question about mount and delay script

Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
Colin

BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom

A few simple questions

Hi, the company I work for will soon be doing some work with OS X server and in an effort to familiarise myself with the software I have set it up at my home on an old blue and white G3 (sadly the best hardware I have to spare right now).
I would like to configure the server to share the internet, serve web pages and an FTP server and a few other basic tasks, but I keep running into trouble, and would appreciate some feedback on these simple questions. My setup is as follows:
Sympatico connection via ethernet DSL modem (server connects via PPPoE)
2nd NIC on server connected to a 5 port switch
Powermac G5 and Windows XP workstations (currently only testing with XP box)
I have been unable to get the server to share the internet connection, the DHCP server does not seem to be serving IPs (although if I map a static address it works) but either way I cannot browse.
My questions are:
Will this setup work with the server connecting via PPPoE or does it require a static IP from my ISP?
Do I have to configure DNS or can I just enter my ISP's DNS IPs instead?
Is there anyway to return the server configuration to default settings? I tried using Gateway Setup Assistant which didn't work, and I'm worried that it's dropped in some settings I'm not aware of.
I've done some reading on here and while I understand it's easier to let a $50 Dlink router handle NAT I'd like to understand this so I can better advise my client.
Many thanks in advance,
Toby

It is entirely possible to run what you describe, but it's hard to tell what state it's in now (and therefore what changes are needed to make it work).
In general, the steps you should follow are:
1) Get the public network side working so the server can talk to the outside world.
2) Get the private network working between the server and the clients.
3) Run gateway assistant, or manually configure the various parts using Server Admin.
The system shouldn't care whether you're using PPPoE, DHCP, static addresses, or even dialup for the public link, so that's not an issue, and neither should DNS.
Other things to check include the firewall on the server (turn it off during this setup to make sure it's not just a firewall configuration issue).
Also, make sure you're using different subnets on the public and private networks, e.g. don't try to have the server hand out public IP addresses to the clients - that won't work.
Check that your basic network connectivity (e.g. ping) works between the various systems on the network. if the clients can't ping the gateway system then they're not going to go anywhere.

Audigy 4 and Reciever/Amp simple question

Hi all,
Despite inundating myself with what is probably TOO much information from the knowledge base and forum, I could really do with an answer to what is essentially a pretty simple question....
I recently got an Audigy 4 sound card and external io hub. Lovely bit of kit. Very nice. I only really use it to watch the odd dvd and listen to music with WMP9.
I have a Sony multi-channel receiver/amp with 5. speakers attached.
The amp has multiple digital connections - all either optical or co-axial. (and individual 5. analogue too)
These currently accept optical links from my dvd player and xbox. Lovely.
So, I would prefer to use the digital connections (nice and easy cable approach as with xbox) but I think I'll only get 2 channels when I play dvd... So what is the best way to connect the two....
Thanks
Glen

The thing about that kind of digital connection is that involves compressing 5. channels into the space of 2, using proprietary encodings. This makes sense in terms of storage space savings (i.e. more room on that DVD for special features), or if bandwidth is constrained (i.e. broadcast TV can fit 5. into the space originally designed for stereo), but the only way it makes any kind of sense for getting audio a few feet from the soundcard to a receiver or speaker system is because nothing more direct ends up being available. The result is that your xbox needs a high-powered chip to make something very (and unnecessarily) complex seem simple. Your Audigy does not have that; it does not have the ability to make that kind of 5. audio for your receiver to then decode.
Your Audigy does, in fact, have the ability to output 5. digitally, in the digital space that 6 full-range channels need, using a single cable; but your receiver, like virtually all of such, doesn't accept it. CL digital speaker systems have a "Digital DIN" input which uses it, but your receiver does not have a "Digital DIN" input, nor any equivalent of that. Even if it did, there's still a problem, because it's muted for DVD-Audio's higher-resolution formats, purely as an effort to prevent consumers access to high-resolution digital audio signals that are not encoded, for copy-protection reasons.
Because DVD 5. soundtracks are pre-encoded on the DVD, you don't need the Audigy to be able to encode. All that is needed is to get the soundtrack from the DVD to your receiver as is. The Audigy can do that. As the other post indicates, the keys are to tell the DVD player software to output digital, and to tell the Audigy not to decode.
Under the covers, that actually uses the Audigy as a 2-channel soundcard, and the rest of its channels are "wasted." None of its real multichannel capabilities can actually be used with a "digital" connection like that. However, if all you do is watch DVD's and listen to stereo audio files, especially if your receiver has features to simulate full surround from stereo, you may not care.
Personally, my strong preference is for the multichannel analog hookup, although I might set up both types so I could compare the sound of the receiver's decoding with the Audigy's decoding.
Things you can't do when using an external decoder hookup:
. Use the soundcard to adjust volume while listening to DD/DTS multichannel soundtracks (though it's best to use the receiver to adjust volume all the time, actually).
2. Hear any other sound sources while listening to DD/DTS multichannel soundtracks.
3. Get multichannel audio from PC games.
4. Get multichannel upmixing using CL's CMSS feature.
-Dave
[email protected]

SIMPLE QUESTION - EXTERNAL iSIGHT CAMERA

I just have a simple question...
I was using an older iMac G5 with an external iSight camera and just upgraded to a new 24" iMac. Can the external iSight camera still be used on an iMac with a built-in camera?
The cable with the external camera allows for more flexible viewing capability.

Hello rgarros50
The second part of your question is not quite so simple.
Plug your external iSight in and turn it on. If you like, you can use the suggestions from How to test your (external) iSight to ensure it is functional to be sure it is working with your new iMac.
The answer to your question about the "default camera" depends on which application you are using to operate your iSight. Here is how camera selection works in a few example:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I have no built-in iSight, when my external iSight is disconnected, the drop-down menu shows only "Time Lapse." Because your iMac has a built-in iSight, your built-in iSight will show in the drop-down menu even when no other camera is connected. Connecting your external iSight should allow you to choose either camera.
(3) Photo Booth is such a simple, basic app that it offers no menu selectable choice. Unless you make your built-in iSight the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use your Firewire external iSight:
• Connect your external iSight and turn it on.
• Quit Photo Booth (PB) if it is running.
• Launch any app with a user-selectable camera "Preferences..." menu command.
(The "tip" suggests that you use iChat, but others should work as well.)
• Open "Preferences..." and set the camera "Preference" to use your built-in iSight.
• Now launch PB. PB should now use the external iSight
because your built-in camera is in use by the other application.
(4) For apps other than those above, see their Help or other documentation.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

A simple question about performance!

Hi! I have a simple question about performance. Suppouse that you have a servlet or a class with DB access, and you need to use a value several times in that page. What is best, to assign the value from say, a resultset or a request.getParameter() to a variable or to call the resultset or the request every time you need to retrieve that value? Which option uses less memory, which is faster, etc.?
Hoping the best fou u
Raul

If you need more values from a db, the best is to open some connections (connection pool) and use the for accessing the db.
To get the data only once, open the connection, get the data, store the data whereever you want: variable (class), hidden control (if you want to send from one page to another by request) and close the connection as quicky as possible.
The advantage of the first method is that the most time consuming activity (connections opening) is done only once.

SIMPLE QUESTION: LYNC 2010 -- AVAYA CS1000 DIRECT SIP: IS THAT POSSIBLE? PLEASE HELP!

Hello,
I would like to ask really simple question here: is that possible to establish (configure, setup, create, make etc.) a direct SIP connection between LYNC 2010 and AVAYA CS1000 PBX. On one side I have Lync 2010 Standard Edition acting as Front-End Server
with co-located Mediation Server. On another side I have AVAYA CS1000 IP PBX Version 7.0. We are trying to make this happen for 1 full year with no luck. The issue is that we do not manage our PBX (external company does).
Here is what we are basically trying to achieve:
All I want is that basically LYNC user (phone # 5678) can dial PBX user (phone # 1234) and talk. Also PBX user can call LYNC user and they can talk. I'm pretty sure that all I'm asking is very simple thing. I don't expect magic to happen (e.g. when one user
calls another user the world will change). All I want is to be able to call between LYNC and PBX users so they can talk.
Sorry for repeating again but here is my simple question: can direct SIP (or call it SIP trunk if this is the right word) be established so LYNC and PBX users can call each other and talk. Whatever protocol is (G.711, G.722 etc.) I will be happy.
If you can let me know I would very much appreciate this. I'm sure I'm not alone in this world and many companies out there using AVAYA CS1000 and deployed LYNC and probably have the same question so it may be helpful to other people as well.
Thanks!

Hi Thamara for reply. I can see where you are going, but the challenge here is that I have found many threads including in this forums from people who successfully connected CS1000 PBX to Lync 2010 for two-way calling, and even dual-forking (which I cannot
even dream about at this time).
If you go to AVAYA WEB site, you can find official AVAYA compatibility MATRIX that is available here:
http://www.google.ca/url?sa=t&rct=j&q=avaya%20compatibility%20matrix%20lync&source=web&cd=1&ved=0CBwQFjAA&url=http%3A%2F%2Fsupport.avaya.com%2Fcss%2FP8%2Fdocuments%2F100135385&ei=v3-5TsXVKMLX0QGHpdSkCA&usg=AFQjCNG6cmW5izdOASMuW34b8iK0vWnwuw
According to this document, only CS1000 version 7.5 supports Lync 2010 and only via ACE - starting first quarter of 2011 (which is done deal by now) - see below for details. The problem is that I have a hard time to understand the meaning of the word "Supported".
I do not really need full support, all I want is to be able to call in both directions using 2 distinct numbers (e.g. 4 digits extensions) that are configured in both systems.
Another thing is this ACE. Apparently it is a big monster software that you need to buy and pay big bucks and lots of configuration just to make it working. But I'm not even sure what will work. We do have one-way calling (from Lync to PBX) - it just does
not work other way, and I have no idea why. I'm not sure if this cannot be working, or because it was not setup right. As I mentioned before we have no access and clue about IP PBX - this is one of my issue here. Withoul knowledge how it works on PBX side
I cannot be sure what is causing this.
So I was wondering if anybody in this world was able to connect CS1000 PBX to Lync and perform two-way calling using two systems.
Thanks!
Microsoft OCS 2010 Lync
Supported (via ACE) - 1Q11

TMG Standalone Array simple question

hi everyone i have what i think is a simple question but i don't know if i'm missing something in all the tutorials about standalone arrays i've read.
i'm working with 2 tmg enterprise editions in 2008R2 in a test environment. both are on sp2 fully updated and a single 20 Mbit connection. i would like for this two tmg's to work for high availability using that connection only and i was able to join both in
a standalone array. here's how they're configured:
tmg01
internal nic ip range: 192.168.1.1/24
second internal nic: not connected at the moment, considering for intra-array network if needed later on (if anyone suggest is absolutely necessary)
external nic ip: dhcp supplied by isp.
tmg02
internal nic ip range: 192.168.1.2/24
second internal nic: not connected at the moment.
external nic: not connected. (where do i connect this one if i only have one modem for that 20 Mbit connection??)
i have read that the intra-array network is not absolutely necessary so i’m leaving those unplugged.
now, here’s my question, since they’re both already on an array, if tmg01 fails to deliver (let’s assume it has a hardware malfunction), how is tmg02 going to take over and connect to the external network if by definition my modem only accepts one cable? will
i have to be near the server and change the cable to the other nic in tmg02 for it to work or do i have to add something in between the modem and the two tmg’s?
is there something i’m missing? will i be needing 2 connections? maybe it’s too obvious or stupid and it just went passed me. i’m open to criticism and opinions.
thanks

Hi
Let follow the best practice.
In Production Normal setup for Full redundant Architecture, we need three servers, one for Array and other two servers for TMG for HA.
1 . TMG Array Server – Subnet Routable with Internal TMG Subnet ( You can also have this in any one TMG but best practice is to separate it )
2.
TMG – 1 – Two NIC, Internal / External
3.
TMG – 2 – Two NIC, Internal / External
Second Internal NIC is not required in your setup. So you can go with two NIC. External and Internal on two TMG
Join TMG 1 and TMG 2 to Single Array which is server 1. By this all the configuration you make on one TMG will sync with other TMG.
How TMG will handle in case of Server failure
You need to Create two NLB in TMG
One for Internal and one for External
Internal NLB
You need to create an Internal NLB, Since you are using 192.168.1.0 / 24 Network for Internal, assign an internal NLB as 192.168.1.3
If you want to use TMG as gateway for all internet connection, then you need to have default Route from internal network pointing to 192.168.1.3 which is TMG NLB internal IP
address
External NLB
Since you have not mentioned External Network, let’s assume you are using 10.10.10.0 / 24 and External Interface of TMG 1 is 10.10.10.1 and TMG 2 is 10.10.10.2, Then create
an External NLB and assign an IP address 10.10.10.3
You need to have a Switch in between your Router and TMG servers,
Connect TMG -1 and TMG – 2 External Interface NIC to Switch
On external NIC – Set gateway as Modem IP address of Both TMG
Connect an internet cable from modem to the same switch
Ensure that, you have a route to 10.10.10.0 /24
from Modem to External NLB IP address Ie 10.10.10.3
Now you don’t have to switch cables to Modem,
Good Luck !!

Snap function in CS4 After Effect (simple Question)

Windows 7 Ultimate
After Effect CS4
Gentlemen .
A very simple question, since i am more of a Premiere person, it seems like I am stuck with this problem and the problem is
In Premiere its called "Snap" its a tool or function that automatically finds the connecting or starting or ending of a clip.
For example if I have 3 channels of video and I have many cuts, by dragging the edge of a video , it tells or shows me when they are connected
I tried to search , all I find is "Snap to Guides" which in not doing what I want .
If you need more explanation, plz let me know , else hope you can help.
Thanks.
Btw. in Premiere the Snap looks like a "Magnet"

To help you with that we need to know something about your composition settings and the settings you picked in the output module. Anything else would just be a guess. My guess is that you're using some HD footage from a non square pixel aspect ratio format and rendering to the same size. If you pick a square pixel HD format (1080 or 720 both have square pixel frame sizes in the default composition settings) and you put your HDV, DVCProHD, AVCHD, Mpeg non square footage in a square pixel comp it will fit and render out correctly.

YouView - a simple question

Hi - new to this so excuse me if this seems a ridiculously simple questions.
The question is : when you have connected up YouView, does that mean that you must watch live TV only on YouView ?
The reason I ask is that I had a slightly better picture (and sound volume) on my TV before I connected up my YouView box (not a significant difference, but noticeable).
I have tried to turn off my YouView box, or put in on standby, but obviously I then get a message that I have no reception.
I could of course disconnect the TV aerial from the YouView box, connect it directly to the TV and watch "normal" tv that way, bit it seems like a lot of hassle.
Any advice welcomed !!!!!
Solved!
Go to Solution.

You connect the RF out on the YouView box to the RF in on the telly. You can then use the telly's own tuner if you want. If your TV supports different profiles each input you may need to tweak the setting for the port you have the YouView box connected to. The settings are rarely ideal out of the box.

Charging 4th Generation Nano - simple question I htink

Is it possible to, using the USB connection, charge my nano on any computer ie one that doesn't have iTunes as a programme? Going to be travelling and not able to take laptop
First using Nano and getting used to it - simple question I know
Cheers and thanks

I have a 4th Generation iPod Nano. It is only charged by linking it up to my computer. I have a Bose Sound Dock which charged my old iPod Nano but it does not charge the new one which is very disappointing. I recently purchased a Gear 4 Mains charger that for some reason is not compatible with the Nano and does not charge it. Can you throw any light on this?

Simple question here.......

Hi all,
i have an simple question here, might be stupid...
once a user makes a http connection to web sever, how can server send message to client upon some events happened so that the client can update the latest things and do not need to click Refresh button in browser explicitly.
Thanks for any clue..

I don't think you can. After a client gets the response from the server the connection closes. That is the whole concept behind the client/server relationship used by web servers.
The closest thing you can do is have the client timed to reopen the connection (basically automatically click the refresh button) at set intervals.

Statspack simple question

Hi all,
I think this is a simple question but new to me.
while configuring statspack on system i found that after running the spcreate.sql package we need to login to sql*plus using perfstat/pwd and then execute statspack.snap. What does this statspack.snap contains. whether it is a package which i can get in any oracle directory or i have to create such file. If i have to create then what will be the content of that.
Thanks
Swadhin

HI, Ravi,
Question is Simple,.
connected / as sysdba
then I created a tablespace STATS datafile size 60m,
then i connected to sysdba user,.( Note I am already connected to sysdba)
and i try to run the script spcreate.sql,.
it is not happening,.
when i give @e:\oracle\ora90\rdbms\admin\spcreate.sql
if i give this i am not able run the script., after 1 or 2 seconds it will exit from sql mode.,
please guide me wat is the issue.,
tempfile size is 100m,.
Note : I am working all things in sysdba user only,.
: IF A PERFSTAT user is not created how u going to connect as perfstat/password., (Through spcreate.sql)
While u running a script it will create an user perfstat for ur reference., Ravi.,
I think some other issue is there please let us know, What is exact issue,. guide me,.
N Anand
[email protected]

Current Year and current month?simple question

How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
Thank you.

i have a directory structre of the format
REPTS2000209/E200209-98000001
in which 2002 is current YEAR
09 is current month
and 9800001 is the code i would submit(list box) from a form
so what i need is a program that can generate the above path and open that particular PDF file
so basically E200209-98000001.pdf is the PDF file.
i am submitting it from JSP page. PLEASE HELP ME how can i program.

DB Connect Simple question

Similar Messages

Maybe you are looking for