DB connect source system creation in BI
Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.
Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des.
Similar Messages
-
DB Connect Source System Creation
Hi,
I am trying to create source system (DB Connect) to extract data from SQL Server to BI.
I had user id/pwd in DB who is authorised to read view created by DB personnel.
n BW Description of Database Connections Screen
There are two fields
CONN.INFO and PERMANENT
What is the functionality of those 2 fields and from where can i get CONN.INFO
Thanks
KrishnaHi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Source System creation in BI 7.0 for SQL Server using DB Connect
Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advancego through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx
-
hi experts,
this is the first time i am creating source system
i am have requirement to load data one bw system to another bi system,
so, to do that i defined and created logical system in bw for bi system and
i created same for bw in bi system also and everything is ok.
i guess my next step is to create source system(my self) for bw in bi .
when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
status symbol under source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
thanks
venuhi chandra shekhar &chitrat,
thanks for your quick reply,when i choose sap business information symbol
it is asking to fill all the entries like crate new destination under this i provided
target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and back groung user in source system and
password ,connection to the source system ,target system for back ground user
and connection to the source system what i need to provide
thanks
venu -
Error while source system creation/Source system transport
Hi,
In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
Message no. RSAR502
Diagnosis
With Remote Function Call to system GWPCLNT900 error connection closed
(no data) ccurred.
Procedure
Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
KrishnaHi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier -
A question about item "type and release" of source system creation
Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115 Oracle Applications 11i
TLF 205 Tealeaf 2.05B
XPD 020 SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
MaggieHello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie -
Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks
Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db -
Not display views/tables on DB connect source system
Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
ThiliniHi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick -
Problem in creating DB Connect source system
Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara -
With out source system creation we have transported all the flow
Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran KumarHi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet -
R/3 Source system creation
Hello,
I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
Thanks. POINTS WILL BE GIVEN.
SDHi
Defining the source system
As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
So, for defining source system is almost same as ordinary BW Source System definitions.
One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
2. Choose transaction "snum" and object "ediport".
Select "number ranges" from the menu "Goto" and here the button "status".
Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
If the number range of your BW system is correct please check the same in your OLTP system.
3. Call TCODE RSA1 on BI System in BI Client.
4. Select Source Systems on Left Menu
5. Left Click SAP System and Choose Create
6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
7. It Must Be OK.
Assign points if it helps
Regards,
Sumit -
How to create UD Connect Source system and datasources.
I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AMHi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy -
R/3 Source system creation for BW
Hi Guru's,
How to create R/3 Source system in BW3.5(Version:IDES) of logical system name- T90CLNT090.
Please tell me what shud be the IP Address and Login details (Userid= ALE_MASTER). If possible plz give me the Password for user ALE_MASTER.
Points will be rewarded those give all the answers for questions mentioned above.
Thank you.Hi Harshal,
You can choose to create a new R/3 source system using the first option (Automatic Creation). Here, you create a new destination and give the details of the new server details (your IDES system). This will create all the necessary ports and connections.
Here, you will need to create a system user (ALE_MASTER in your case). Setup this user as a system user in transaction SU01 before you start creating the connection to the new system. Create this user in both systems (BW and IDES).
Password for ALE_MASTER can be anything you set. Just remember the password if any maintenance of this user is needed in future.
Hope this helps.
Thanks and Regards
Subray Hegde -
Source System Creation in BI to load data from ECC 6.0
Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu
Maybe you are looking for
-
IMac late 2006 screen won't turn on
Hey everyone. I have a 24" Intel iMac that I bought in December of '06 and I'm trying to figure out if it can be fixed. I powered it up one day and the screen just won't turn on. I can hear the fans and drives, but no screen or startup chime. The whi
-
is there any way I can dump a report output ina table using bi-publisher?
-
OutPut as a PDF doc for Output Determination process of a PO
Hi Can I get the OutPut as a PDF document for OutPut Determination process of a PO for a Vendor. My schema should produce a PDF file and get transmitted to that Vendor as soon i save my PO. Also can i get any SAP document on this. Pls help me. Swifty
-
Hi Friends, While converting PR(Purchase Requisition) to contract, text is not being copied. Most of our PR are of not with Material, so that we maintain maually at item text while creating PR. We are using Item text. I checked in Customisation for D
-
Number not appearing when calling landlines
I have a subscription for an American number with months to go, but when I call a landline in the US the number is not appearing on the caller ID like before. This is an error that needs to be fixed.