DB Console not running for Oracle XE

Dear All,
I have installed Oracle XE on Linux machine. Database is running listener is up.
But when I try to access database console using this http://127.0.0.1:8080/apex
The error message i get is "Operation failed. root is not a member of 'dba' group.
Oracle installation have created oracle user itself. How could i get through this error?
Please advice. Also please if i need to change port 8080 to like 8181 what should I do?
Thanks,
Imran Baig

Anyone who have seen this error before?
Kindly help

Similar Messages

Vnc console not running on Oracle VM 3.1.1

Dear All,
I try to lunch ovm console with a new Virtual Machine but not work.
I installed Oracle VM Manager on Oracle Linux 5.
- Installed tightvnc package on VM Manager host: tightvnc-java-1.3.9-4.noarch.rpm
- Window 7 as computer client using Java 1.6 with browser version 16.0.2
Window guest (2008R2) is shown status running fine but the its Lunch Console is not running and view.
Problem: When file "ovm_rasproxy-ws.jnlp" pop-up, I click OK then type password console password, click OK button, vnc not running and disappear forever.
Please kindly give advice for this.
Thanks and regards,
Vandy

Now I have installed java jdk 1.6u37 and Java Control Panel to see message when pop-ups.
Now I have 2 virtual machines:
1. virtual machine created from template that converted from physical machine (window 2008R2)
2. virtual machine create isofile (Window 2008R2 iso)
After I edit java setting and now can see all message as below:
Note: both virtual machines have 2 java console pop-up messages
1. Java Console - Oracle VM Remote Access Service
2. Java Console - Vnc Viewer
1. virtual machine created from template that converted from physical machine (window 2008R2)
+ Java Console - Oracle VM Remote Access Service message
Java Web Start 1.6.0_37
Using JRE version 1.6.0_37-b06 Java HotSpot(TM) Client VM
User home directory = C:\Users\Heng
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.0.101
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000e8bc028487c2f2ab
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: SessionID : f5739ba9-3cdd-4c75-b4a1-bb0177f30d34
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.RasProxyApplet startListening
INFO: RAS proxy listening on /127.0.0.1:52794
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
Nov 12, 2012 5:10:16 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
+ Java Console - Vnc Viewer
Java Web Start 1.6.0_37
Using JRE version 1.6.0_37-b06 Java HotSpot(TM) Client VM
User home directory = C:\Users\Heng
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
Initializing...
Connecting to 127.0.0.1, port 52794...
Connected to server
RFB server supports protocol version 3.8
Using RFB protocol version 3.8
Performing standard VNC authentication
Now VNC Authentication page pop-up to type console password, after I type console and click OK button, the Java Console - Vnc Viewer disappear forever and see Oracle Ovm Ras Proxy pop-up appears but vnc console not view OS of virtual machine. Especially, the Java Console - Oracle VM Remote Access Service message change message as below:
Java Web Start 1.6.0_37
Using JRE version 1.6.0_37-b06 Java HotSpot(TM) Client VM
User home directory = C:\Users\Heng
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.0.101
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000e8bc028487c2f2ab
Nov 12, 2012 5:10:08 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: SessionID : f5739ba9-3cdd-4c75-b4a1-bb0177f30d34
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.RasProxyApplet startListening
INFO: RAS proxy listening on /127.0.0.1:52794
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
Nov 12, 2012 5:10:12 PM com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
Nov 12, 2012 5:10:16 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
Nov 12, 2012 5:16:01 PM com.oracle.ovm.ras.proxy.ChannelThread run
INFO: Server closed connection
Nov 12, 2012 5:16:01 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Vncviewer stopped, closing proxy
2. virtual machine create isofile (Window 2008R2 iso)
1. Java Console - Oracle VM Remote Access Service
Java Web Start 1.6.0_37
Using JRE version 1.6.0_37-b06 Java HotSpot(TM) Client VM
User home directory = C:\Users\Heng
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
Nov 12, 2012 5:23:47 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.0.101
Nov 12, 2012 5:23:47 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000811dce8e630704d1
Nov 12, 2012 5:23:47 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: SessionID : 84282504-8234-46f7-8b2f-4f7e5e9209e2
Nov 12, 2012 5:23:52 PM com.oracle.ovm.ras.proxy.RasProxyApplet startListening
INFO: RAS proxy listening on /127.0.0.1:52838
Nov 12, 2012 5:23:52 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
Nov 12, 2012 5:23:52 PM com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
Nov 12, 2012 5:23:56 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
2. Java Console - Vnc Viewer
Java Web Start 1.6.0_37
Using JRE version 1.6.0_37-b06 Java HotSpot(TM) Client VM
User home directory = C:\Users\Heng
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
Initializing...
Connecting to 127.0.0.1, port 52838...
Connected to server
RFB server supports protocol version 3.8
Using RFB protocol version 3.8
No authentication needed
No authentication: success
Desktop name is MS2008R2(iso)
Desktop size is 800 x 600
Using Tight/ZRLE encodings
Throughput 17980 kbit/s - changing to Hextile encoding
The Oracle Ovm Ras Proxy pop-up appears and vnc console view OS of virtual machine.
Please kindly give advice for this.
Thanks and regards,
Vandy

EM is not running for Oracle 10.2.0.5 on windows 2008 R2

Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia

70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful.

Default logic not running for a particular team

Hello,
I have a financial consolidation application in BPC 7.5 NW. We have a particular problem, whereby the default logic is not running for one team when they are uploading data. The error message is "Error running default logic. Error converting records. The root element is missing".
Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
Can someone please explain how this is possible in BPC?
Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In both versions of the default logic, the following code is inserted for FX translation:
// Query 6 - Perform currency translations - run currency translation stored procedure
*XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET ENTITY=%ENTITY_SET%
*XDIM_MEMBERSET MEASURES=YTD
*RUN_PROGRAM CURR_CONVERSION
      CATEGORY = %CATEGORY_SET%
      CURRENCY = GBP
      TID_RA = %TIME_SET%
      RATEENTITY = GLOBAL
      OTHER = [ENTITY = %ENTITY_SET%]
*ENDRUN_PROGRAM
*COMMIT
Thank you very much.
Edited by: kashifmehmood on Jun 17, 2011 4:12 PM

Hi
1.Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
One of the reason may be there are some secured dimensions involved like Entity, which is not assigned to the team. Refer to the HTG document below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207995e8-deb8-2d10-3cb9-8ab146c95a09?quicklink=index&overridelayout=true
2.Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In my opinion your consultant created "DEF BU 9 Mar 2011.LGF" and maintained the logic in that logic file. To run the logic by default, he has to call the earlier logic file in DEFAULT.LGF.
*INCLUDE DEF BU 9 Mar 2011.LGF ( Nothing wrong in keeping the entire logic, but it is not required)
Logic file ""DEF BU 9 Mar 2011.LGF" can be called by DM packages.
Thanks

Is RAID 5 not recommended for Oracle database ?

- I am planning to install Oracle database
Here are the specs:
- Dell PowerEdge T610 server
- Windows 2008 R2 (64-bit )
- 24 GB memory
- Oracle 10g database (64-bit database)
- Our database is for an ERP based client server application
- Will have around 35-45 users
- Will have around 150-200 transaction per day ( 8AM-5PM) only database
- database would be around 10-15GB (data files)
Now I am planning to buy the hardware server, I heard that RAID 5 is not recommended for Oracle database.
Is it true ?
What do you recommended for Oracle database ? RAID 5 (or) RAID 1

johnpau2013 wrote:
I heard that RAID 5 is not recommended for Oracle database.
Is it true ?Kind off... as Oracle (as per the RAC Starter Kits for example) explicitly recommends SAME - as in Stripe And Mirror Everything.
This is a combination of RAID1 and RAID0.
However, you will also get whitepapers from storage vendors like EMC in partnership with Oracle, that explains how to configure and use RAID5 storage and how effective this is. And as some will tell you, RAID5 can work just fine with Oracle... and some others will grimace and tell you how bad an idea that is from personal experiences.
In a nutshell - RAID5 requires a parity calculation on each write. That is a very expensive overhead if that calculation impacts the fwrite() (file write) command of a process writing data to disk. It significantly slows down the write operation.
However, if that parity calculation is done asynchronously and does not effect the elapsed time for a fwrite(), then a fwrite() to RAID5 is as fast or as slow as it would be to RAID10 for example.
Unsure how many modern storage system supports off-loading the parity calculation and not impacting the write I/O call. This can be done using ASICs (Application Specific Integrated Circuits), specialised s/w on the storage server, etc.
Whatever you put in place - test the RAID config thoroughly up front and ensure that performance is up to specs. There's a utility called fio (<i>Flexible I./O</i>) written by a Linux kernel hacker that works for Oracle. It is an excellent utility to use to generate and test I/O - but it is Linux and Unix based.
Any specific reason using Windows? Linux is by far a more predominant 64bit operating system than Windows, and has significant higher market share in Oracle RDBMS than Windows. Given the fact that over 93% of the 500 fastest computer systems on this planet runs Linux, I'm always kind of amazed that some would still use Windows as a server-side o/s for Oracle.

SAP Note 23345 for Oracle Consistency Check

Dear All,
I would like to run a Consistency check using backup type = online option via DB VERIFY but unfortunately each time I run the backup online using the below commands I am getting permission error.I have run the commands below using ORA<SIDADM>
brbackup -u / -m all -w only_rmv -e <parallel degree> -c
brbackup -u / -m all only_dbv -c -t online -e 3
brbackup -u / -m all -w only_dbv -e 3 -c
brbackup -u / -c force -w only_dbv -t online -p init<sidadm>.sap -m ALL -e 3
brbackup -u / -c force -w only_dbv -p init<sidadm>.sap -m ALL
I hope someone could provide what is the best command to use in order to execute the Consistency check in Online mode as I am planning to schedule it on weekly basis with the Online option..
Thank you.
Regards,
John

Do not double post the same question in different forums:
SAP Note 23345 for Oracle Consistency Check
Markus

Analysis Engine Not running for IPS in AIPSSM Module

Hi all,
The Analysis Engine is not running for IPS module in AIPSSM Module. Please let me know how can i resolve this issue and get the analysis engine of IPS to running status.
Regards
Kiran

Hi Kiran,
Ideally, what you can do is to remove the configuration on the ASA that sends traffic to IPS.
The crash in sensorapp or analysis engine might be traffic, configuration related.
We can try to reboot the IPS with no load on it by stopping sending traffic to it.
You can remove the IPS policy from the ASA configuration.
http://tools.cisco.com/squish/2f7A3
What this will do is stop ASA from sending any traffic to IPS.
Now do the hw-module module 1 reset command.
See if the IPS module comes back up.
If that also fails, then you can re-image the module.
This will however erase the configuration on the module.
The re-image procedure for SSM module:
http://tools.cisco.com/squish/ee66a
Hope this helps.
Sid

Why does my console NOT run as a storage node

help!
I created a minimal console script, for testing, to run as a storage node, with my own classes in the classpath.
Unfortunately, it does not act as a storage node, even though I patterned it after the console script in the coherence/bin directory.
The failure symptom is that my application, run on a non-storage-enabled jvm, fails with "storage is not configured."
If instead of the console, I run as a storage node a jvm, with the same command line options, except with my own mainline that loops dumping the cache, the application in the other jvm works.
The console does work as a client node, and is able to use my custom classes from the classpath. Hence it is participating in the cluster (the whole cluster runs on my PC).
I assume there is something simple wrong here, but it escapes me.
Thanks in advance
Run Command
/java/SDK_EE/jdk/bin/java
-cp '/tmp/rvcinf-test/bin;../../../dist/rvcicache.jar;../../../lib/coherence.jar'
-server -Xms256m -Xmx512m
-Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true
-Dtangosol.coherence.distributed.localstorage=true -Dlogfile=logs/runsvrx-coherence.log
com.tangosol.net.CacheFactory
How the Working Java Storage Node is Run
/java/SDK_EE/jdk/bin/java
-cp '/tmp/rvcinf-test/bin;../../../dist/rvcicache.jar;../../../lib/coherence.jar'
-server -Xms256m -Xmx512m
-Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true
-Dtangosol.coherence.distributed.localstorage=true -Dlogfile=logs/runsvrx-coherence.log
test.MainlineStorageNode
Notes:
My classes in:/tmp/rvcinf-test/bin and ../../../dist/rvcicache.jar
Shown on multiple lines for readibility - was executed as one line (this is an output of bash after set -x)
Coherence3.4.1/407
Edited by: mesocyclone on Sep 18, 2009 11:10 PM

Hi,
The CacheFactory console does not automatically join all cache services. If you join the cache-service that your application is using from the console, e.g.:
Map (?): cache foo
2009-09-19 20:55:07.606/6.305 Oracle Coherence GE 3.6/480 <Info> (thread=main, member=1): Loaded cache configuration from "file:/Users/rhlee/work/coherence/env_configs/v2/coherence-cache-config.xml"
2009-09-19 20:55:07.779/6.478 Oracle Coherence GE 3.6/480 <D5> (thread=DistributedCache, member=1): Service DistributedCache joined the cluster with senior service member 1
...it should work.
thanks,
-Rob

EMCTL not running on Oracle 11g (R2)

Hi All,
I have installed Oracle 11g (R2) on RHEL 5.3, everything went smooth and the installation got successfull, but the emctl is not running, when i try to give command "emctl start dbconsole" , "emctl status dbconsole", "emctl secure dbconsole" , it ends up with
Can't locate CompEMdbconsole.pm in @INC (@INC contains: %s_javapOracleHome%/sysman/admin/scripts %s_javapOracleHome%/bin /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib/5.10.0/i686-linux-thread-multi /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib/5.10.0 /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib/site_perl/5.10.0/i686-linux-thread-multi /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib/site_perl/5.10.0 /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/lib/site_perl /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/libwww-perl/lib /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/ext/POSIX /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/URI /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/HTML_Parser /opt/oracle/app/oracle/product/11.2.0/dbhome_1/perl/HTML-Parser/lib /opt/oracle/app/oracle/product/11.2.0/dbhome_1/sysman/admin/scripts /opt/oracle/app/oracle/product/11.2.0/dbhome_1/bin /opt/oracle/app/oracle/product/11.2.0/dbhome_1/sysman/admin/scripts/Net-DNS-0.48/lib/ /opt/oracle/app/oracle/product/11.2.0/dbhome_1/sysman/admin/scripts/libnet-1.19/ .) at /opt/oracle/app/oracle/product/11.2.0/dbhome_1/bin/EmctlCommon.pm line 597.
So, please help me where i can get this file "CompEMdbconsole.pm" in order to start and run OEM
Thanks

Hi Ogan, Thanks for the reply, here is the output of command set
BASH=/bin/bash
BASH_ARGC=()
BASH_ARGV=()
BASH_LINENO=()
BASH_SOURCE=()
BASH_VERSINFO=([0]="3" [1]="2" [2]="25" [3]="1" [4]="release" [5]="i686-redhat-linux-gnu")
BASH_VERSION='3.2.25(1)-release'
COLORS=/etc/DIR_COLORS
COLUMNS=178
CVS_RSH=ssh
DIRSTACK=()
EUID=500
GROUPS=()
G_BROKEN_FILENAMES=1
HISTFILE=/opt/oracle/.bash_history
HISTFILESIZE=1000
HISTSIZE=1000
HOME=/opt/oracle
HOSTNAME=localhost.localdomain
HOSTTYPE=i686
IFS=$' \t\n'
INPUTRC=/etc/inputrc
KDEDIR=/usr
KDE_IS_PRELINKED=1
KDE_NO_IPV6=1
LANG=en_US.UTF-8
LD_ASSUME_KERNEL=2.6.18
LD_LIBRARY_PATH=/usr/local/lib
LESSOPEN='|/usr/bin/lesspipe.sh %s'
LINES=57
LOGNAME=oracle
LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:'
MACHTYPE=i686-redhat-linux-gnu
MAIL=/var/spool/mail/oracle
MAILCHECK=60
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
OPTERR=1
OPTIND=1
ORACLE_HOME=/opt/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_TERM=xterm
ORA_NLS33=/opt/oracle/app/oracle/product/11.2.0/dbhome_1/ocommon/nls/admin/data
OSTYPE=linux-gnu
PATH=/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/opt/oracle/bin:/opt/oracle/app/oracle/product/11.2.0/dbhome_1/bin
PIPESTATUS=([0]="0")
PPID=25076
PRELINKING=yes
PRELINK_FULL_TIME_INTERVAL=14
PRELINK_NONRPM_CHECK_INTERVAL=7
PRELINK_OPTS=-mR
PS1='[\u@\h \W]\$ '
PS2='> '
PS4='+ '
PWD=/opt/oracle
QTDIR=/usr/lib/qt-3.3
QTINC=/usr/lib/qt-3.3/include
QTLIB=/usr/lib/qt-3.3/lib
SHELL=/bin/bash
SHELLOPTS=braceexpand:emacs:hashall:histexpand:history:interactive-comments:monitor
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT='192.168.2.253 29612 22'
SSH_CONNECTION='192.168.2.253 29612 192.168.2.164 22'
SSH_TTY=/dev/pts/1
TERM=vt100
UID=500
USER=oracle
_=clear
consoletype=pty
mpi_selection=
mpi_selector_dir=/var/lib/mpi-selector/data
mpi_selector_homefile=/opt/oracle/.mpi-selector
mpi_selector_sysfile=/etc/sysconfig/mpi-selector
qt_prefix=/usr/lib/qt-3.3
tmpid=500

OC4j is not running for OBI10g (perfcounter problem)

Hi Gurus,
Earlier I could work with OBI EE 10g,
but now when I wanted to start OC4j
I continually get the following message pair:
2011-05-17 16:26:00.328 NOTIFICATION Oracle BI Presentation Server has stopped.
Perfcounter data is not collected.
2011-05-17 16:26:00.328 NOTIFICATION Oracle BI Server has started. Perfcounter d
ata is collected.
after the
- Scheduler BIPublisherScheduler_$_NON_CLUSTERED started.
11/05/17 16:25:52 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
But the BI server and the Presentation server seem to be working, but I am not able to work with presentation services.
Any ideas?
Many thanks in advance!
Best regards
Laszlo

Hi lczinkoc,
Did your question answered..?
Is your problem resolved..
I am also getting the same problem...
2011-05-24 17:59:04.738 NOTIFICATION Oracle BI Server has stopped. Perfcounter data is not collected.
*2011-05-24 17:59:14.738 NOTIFICATION Oracle BI Server has started. Perfcounter data is collected.*
011-05-24 17:59:44.738 NOTIFICATION Oracle BI Presentation Server has stopped.
Perfcounter data is not collected.
but Perfcounter data is collected: this does not happen for BI Presentation Server.

EAS not running on Oracle Application Server, Oracle Enterprise Linux

Okay, another question. EAS is up and running on Oracle Application Server, but the URL is unresponsive.
In the eas log file, I see
Exception message (Oct 25, 2009 11:33:03 AM):
no environmentjni in java.library.path
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at com.essbase.eas.server.AppManServlet.init(Unknown Source)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
Warning message (Oct 25, 2009 11:33:03 AM):
java.library.path=/app/oracle/product/OracleBI/server/Bin:/app/oracle/product/OracleBI/web/bin
I assume that the problem is the java library path, which is pointing to directories related to my OBIEE installation, instead of a java environment somewhere in the hyperion install. If that's right, how do I change this?
Thanks!
Edited by: James@JHPWD on Oct 25, 2009 8:44 AM

Do you have a resolution for this issue? I am encountering the same issue on Solaris 10 SPARC using Essbase 64bit, OAS and Shared Services.
Thanks,

Dispatcher Not running for XI

Hi Gurus,
I have a XI 3.5 system with Oracle 10.2 Database.
Errors
01) From MMC Dispatcher is not running
02) 'Work' Folder is also not accessible. Although the folder is showing almost 3.5 GB of Data but on clicking no files can be seen
R3trans -d is successfull, Oracle & listener is also running
Please suggest....
Regards,
Souren
Edited by: Souren on Jun 15, 2009 10:04 AM

The directory 'work' is not hidden or compressed. Same problem persists with this folder.
But now the system is up but dispatcher is yellow and following msg is showing.
"Running but dialog Queue Info Unavailable: j2ee all processes running"
The only thing that I did is I have re-initialise the auth to all SAP & Administrative users from OS level.
Please suggest
01) How to get access of the Work folder.
02) How to make the dispatcher green from yellow?
Regards,
Souren

Job dependecny with Not running for other jobs condition

Hi,
I have a job chain which should run with the below conditions
1) at 19:00 GMT.
2) Also it has another dependency that it should check for job x and job y and both these job x and job y should not be running.
I checked for creating job locks and locks can be used for two jobs and it compliments each other and cannot be used in this case.
How do I set this dependency in this case.
Thanks.

Hello,
Then I don't understand the scenario.
So the 19:00 job can only start when job x and y are not running. But job x and y can start when the 19:00 job is running?
In that case create a pre-running action on the 19:00 job that checks if job x or y are running and waits for them to finish.
Regards Gerben

[b]Can't not run the Oracle Universal Installer (Oracle8.1.7 for Linux) on

I have a problem when try to install Oracle8i Release 8.1.7 Enterprise Edition on RedHat Linux 7.3. After I do the pre-installation tasks, i enter the command (runs as the oracle user):
$ /tmp/Disk1/runInstaller
I wait for the one minute and then nothing is happen. I don't understand the reason why the Oracle Universal Installer can't not display! Please tell me all reasons may be!

Sorry the Oracle version should be 1.7 not 1.1.7. I downloaded it from the web site. The JRE I downloaded is jre 1.18 because the installer asked for this version.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bin Yao ([email protected]):
I have a problem to install Oracle8 1.1.7 for linux on Mandrake. When I run ./runIstaller I got a error message that the Java RunTime Enviroment was not found at ?/bin/jre. The "?"stands for a strange character and may change at diffrent time runing the installer. I downloaded a JRE from blackdown and make a link to /usr/local/jre and I also tried to make link to the JRE shiped with Oracle8 1.1.7. But I still get same error. Does Oracle8 1.1.7 still need JRE downloaded and insatll(or link) to /usr/local/jre? I don't know what else I can try. Please give me a help. Thanks.<HR></BLOCKQUOTE>
null

Some Schedule jobs are not running in Oracle 10g

i have total of 8 Schedules jobs in Oracle 10g test database which were not in sync with prod database . So i re-created all of them again and then enbled them . but some 4 of them didnt ran on their NEXT_RUN_DATE . Showing NULL on LAST_START_DATE and LAST_RUN_DURATION . How to make them Run
select OWNER,JOB_NAME,START_DATE,STATE,SCHEDULE_NAME,LAST_START_DATE,LAST_RUN_DURATION,NEXT_RUN_DATE from ALL_SCHEDULER_JOBS
where OWNER='MESH_FOR' and last_start_date is NULL;
OWNER     JOB_NAME     START_DATE     STATE     SCHEDULE_NAME     LAST_START_DATE     LAST_RUN_DURATION     NEXT_RUN_DATE
MESH_FOR     REFRESH_TERMINALS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_MN_SERVERS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_EVENT_INFO_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     UPDATE_MV_CHANGES_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00

Hi,
Could you please explain, what is OS authentication?
I created a new user for creating and runing jobs.
I have given following priveleges to the new User.'
1)Connect
2)SELECT_CATALOG_ROLE
3)Create Job
Then, I created the job as follows.
BEGIN
sys.dbms_scheduler.create_job(
job_name => 'SMPL_TST_JB',
job_type => 'PLSQL_BLOCK',
job_action => 'Declare
Result Integer;
begin
Result:=1;
/* Other statments */
Exception
when others then
Result:=3;
end;',
repeat_interval => 'freq=daily;byhour=10;byminute=00;bysecond=00',
start_date => systimestamp,
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'logging_level', value => DBMS_SCHEDULER.LOGGING_FULL);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'restartable', value => TRUE);
END;
Then, I run the job as following.
SQL> begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
2 /
begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
ORA-03113: end-of-file on communication channel
Thank you,
Regards
Gowtham Sen.

DB Console not running for Oracle XE

Similar Messages

Maybe you are looking for