DB instance not found
Hi,
When i try to connect to dbmcli the result is
bsa0938:sqdu00 111> dbmcli -U c
Error! Connection failed to node bsa0938 for database U00:
database instance not found
bsa0938:sqdu00 111>
When i checked the database.ini file in /sapdb/data/config there is nothing inside that file
when i checked the dbm.prt file i could see somebody executed db_unreg command.
But the data files and logfiles are there.
To run db_reg command i need that dbmcli working and can v run the db_reg command?.
can anybody help me out here?
Regards,Durairaj
Hi Durairaj,
first of all: databases.ini is nothing you should "look into".
Use "dbmcli db_enum" to figure out what databases there are available.
To re-register a database use the following commands:
dbmcli -R "<dependend_path>" db_create <DBSID> control,<control-pw>
If really all files are still there, then this should be sufficient to access your db instance again.
regards,
Lars
Similar Messages
-
View attributes can not be retrieved. View instance not found or undefined
Hi,
I am creating a simple master detail OAF page. For this I have done following steps:
1. Created ParentEO and ChildEO
2. Created ParentVO with a transient attribute called "SelectFlag" with default value "Y" .
3. Created ChildVO
4. Created a UserViewLink.
5. Created Application module (UserAM).
6. New Page UserPG
7. In the main region I have defined Application Module.
8. Under the main region, I have created a new advanced table region with following properties:
View Instance : ParentVO1
Detail View Attribute : SelectFlag
View Link Instance: UserViewLink.
Now when I click to select the "Child View Attribute", it gives a pop up saying "View attributes can not be retrieved. View instance not found or undefined".
Please help, I am not able to proceed on this.
Thanks,
AnupamAnupam,
I do not see in your steps where you associated the VO with the AM. In order to select an attribute, the AM must have an instance of the VO associated with it. Double click the AM in the navigator. Click Data Model and shuttle the VO's you want to be available from the left to the right.
Hope this helps.
Kristofer -
Error while invoking bean "finder": Instance not found in datasource
Hi All
I am facing Error while trying to execute a BPEL processing using Notification service for sending out mail .
Following is the Error Stack :
<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "finder": Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
at [b]com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
at displayInstance.jspService(_displayInstance.java:111)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
<2006-09-20 14:55:44,109> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
<2006-09-20 14:55:44,119> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
The understanding formed till now is that the service is trigged using a stateless session bean wrapper and the lookup for the same is failing.
One option will be to write the java code for performing the lookup using method
lookupInstanceByConversationId(String convId, DomainAuth auth)
but certain information e.g DomainAuth is not available.
I have tried locating information about the dynamic wrapper which is being created.
Any inputs/comments/direction for the above problem are welcomed
CheersThanks Marc.
I checked the domain log (ORA_BPEL_HOME\bpel\domains\default\logs\domain.log) for information. It repeats the same error displayed in the bpel server window.
I have now put some SOPs in my Java embedding activity to see if the process gets instantiated or not. On the BPEL server window, I am able to see these SOPs upto the point where I invoke a method invocation on my remote Java class. Which clearly means the BPEL process is instantiated, contrary to the information in the error (that the BPEL instance cannot be found) I am getting. -
AIP-50143: Transaction Instance Not found for Transaction Id
Hey Guys,
We have configured a Custom Document Exchange over Generic protocol to transfer a file.
1. Internal delivery channel is 'SFTP' - Picks file
2. External delivery channel is 'SFTP' - Puts file
3. Exchange protocol - Custom document over generic
4. Translation enabled - False (Currently its turned off, but the file is xml so we may want to turn it on)
5. Validation enabled - False
We are encountering below error in B2B while processing. Can someone please help with this.
Thanks,
Phani
010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin PickReqRev 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : Cremul version D96A
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : EDIPHARM version 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : PickReqRev version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin Generic version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin info : Genericversion 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage translated payload =
oracle.tip.adapter.b2b.message.MessageStorage@140fee
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage msg.isSignalMsg() = false
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Call Outgoing Response Processor
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Enter
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Update the Request-Response Table Row for RefertoRequestMessageID with message state Processing Outgoing Response
2010.02.05 at 18:41:41:676: Thread-26: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.02.05 at 18:41:41:677: Thread-26: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:693: Thread-26: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:694: Thread-26: B2B - (ERROR) Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
2010.02.05 at 18:41:42:001: Thread-26: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.05 at 18:41:42:014: Thread-26: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A140A0E126A1276F45000001AD6B570</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (fcgemappdev04)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1213)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3252)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
... 4 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
... 6 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 7 more
]]>Hi Phani,
What is the naming convention you are using at IDC? If you are sending the response to your TP, then make sure to send ReplyToMsgId as part of file name. If it is not a response, then send MessageType as 1 as part of file name.
For file naming convention required, please refer -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
Regards,
Anuj -
Livecache Error in SCM5.0 - Database Instance Not Found
Hi,
I installed SCM5.0 SR2 IDES version on Windows 2003. I selected Livecache in SAP System option when installing SCM5.0. After complete installation, I executed MAxDb exe file to install the MaxDb. I get this error when I try to access LCA Monitor in LC10.
Here the error details:
Name and Server: LCA - SCMSRVR
DBMRFC Function: DBM_CONNECT
Error: DBM Error
Return Code: -4
Error Message: Database Instance Not Found
It wolud be really helpful if someone could respond to this messgae.
Thanks
SatishHello Satish,
-> My assumption was correct. Please see my first reply:
"Please pay attention that the liveCache server software is not supported on the 32bit Windows
server. You could install the liveCache client software on 32 bit Windows server, if the
application running on the 32 bit Windows to be able to communicate to the liveCache instance. The liveCache instance need to be installed on another server, please overview the
PAM matrix or check info at
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0 ->
"Matrix of released OS platforms for SAP liveCache Technology 7.6.0" "
You need the server, where you could install the liveCache instance.
After the liveCache instance will be installed, you need to follow up with the post installation
Steps from the liveCache installation guide, which you could also display from link
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0
-> "Yes.I found the above two files.
Dbmcli.exe --> Found in the directory /sapdb/programs/pgm
Sdbregview.exe --> Found in the directory /sapdb/programs/bin"
==> You could start the command prompt from those directories & run the recommended
commands.
With output of the 'sdbregview -l' command you will get the list of the database packages
installed on the server.
-> Please see helpful SAP notes ::
820824 FAQ: MaxDB / SAP liveCache technology
767598 Available documentation
Thank you and best regards, Natalia Khlopina -
LMS4.1: Automonitor Link Ports + Instance Not Found
Hello,
In HUM there are no linked interfaces discovered, dispite them exists at CM topology and DCR discovery report sees all CDP neighbors as well.
1.
All Devices Device Availability
Active
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
2.
All Devices CPU Utilization
Active
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
3.
Link Ports Interface Availability
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
4.
Link Ports Interface Errors
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
5.
Link Ports Interface Utilization
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
What can we do?
march-bundled path for LMS4.1 has allready been installed.
Want to create the interface poller based on a report of linked ports manualy. But neither port nor interfaces have got neighbor attributs.
How is this possible to create a linked port report?
thx for hints,
SteffenFWIW with Cisco TAC and DiData on similar set of circumstances for our install, it was paramount that devices discovered and/or manually added are actually interconnected. Once added successfully, we De-activated then Activated these three pollers, then their status remained ACTIVE and stable. And stats like Utilization (ONLY on interconnected links) were populating successfully.
In hindsight this makes sense, but yeah if you take the slow and steady approach and like one device at a time, you'll get stuck on this one.
Regards, Christopher -
DATABASE MANAGER ERROR "-4 database instance not found"
Hi
I have installed NNW 2004 ABAP Trial Version and everything seems to be good. SAP GUI is installed and MAX DB too.
Except, I am unable to "add a database instance" in the Database Manager. The instructions tell me to leave the entries as default (database server: <local> and port: <default>) but then when I click the ADD button up pops the message:
-4 database instance not found
I have a 32 bit Intel Atom processor Netbook running Windows 7 with two drives C: and D:. I have tried disabling my antivir with no avail.
I think the problem could be either:
A) My installation is on the D drive but the database might be searching for something on the C drive????
B) There are some "sap" type entries (like 200 of them) in my system32/drivers/etc/services file. One in particular is "sapdp00 3200/tcp" and I know the installation says make sure there are no "3200 ports". I would like to change this and save the file but up pops a message saying "access is denied" even though I have admin rights.
Any help would be appreciated
JoshPlease, any hints or directions would help immensely as I am not a technical expert
Thanks in advance -
JPS-03026: PDPService and PolicyStore Service instance not found in default
Dear all
I just installed OIAM and I am facing this error when I try to start AdminServer:
JPS-03026: PDPService and PolicyStore Service instance not found in default context
There is an entry in the manual that says that I need to execute this:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
I did it, I see in the weblogic.policy file the entries mentioned in the manual:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_
${jrf.version}/*" {permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {permission java.security.AllPermission;
Still I have the same issue.
Any ideas?
Thanks
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
I have an RFC-enabled BAPI and when a coworker tries to call it in .NET he gets the exception "Instance not found". Does anybody have any idea what could be the issue? It seems like it can't even find the BAPI. He can see it in .NET, it is remote enabled, and it works with the testing function.
Regards,
Davis
We solved ourselves, the error is in User Exit developed by us.
Thanks.
Workplace Installation Error: DB instance not found
Hello all,
While installing our Developer Workplace SR2 on our workstation, we encountered an error indicating that the database instance is not found.
FYI, we were able to successfully install two without the problem . It appears that during the installation, it was able to access the database - dropping the said instance - but failed in creating the database instance afterward.
Will reward points for helpful answers.
The log is located below:
> Subprocess starts at 20080729165754
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20080729165754
OK
OK
END
'CONTROL'
'DBSERVICE'
'SUPERDBA'
> Subprocess starts at 20080729170435
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20080729170436
OK
State
ONLINE
> Subprocess starts at 20080729170436
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_offline
Execute Session Command : exit
> Subprocess stops at 20080729170440
OK
> Subprocess starts at 20080729170441
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -s -d J2E -u CONTROL,********
Execute Session Command : db_offline
Execute Session Command : db_drop
Execute Session Command : exit
> Subprocess stops at 20080729170442
OK
OK
> Subprocess starts at 20080729170444
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,********
Execute Session Command : param_startsession
> Subprocess stops at 20080729170444
> Subprocess call failed
Error! Connection failed to node BASP-BMZMT1S-D for database J2E: database instance not found
Hello Juan,
Thanks for the prompt response.
As I reviewed the sequence of the installation, it appears that this could be an installation bug. The sequence does not make sense at all - it drops the database instance and starts a session after that - thus, resulting into the error.
The option I chose during installation is to recreate the default DB instance which is "J2E" that is made available during the MaxDB installation. Thus, it should recreate the "J2E" instance after the dropping of which -- this appears to be missing in the entire sequence.
The Resoultion/Workaround
Well, nothing amazing - but I just chose to make a different DB instance instead of using the existing J2E instance from MaxDB (i.e. DB1). In this approach, it does not have to drop the instance but instead create a NEW instance.
Not a definitive solution but a mere, common sense workaround. But I hope this helps those who has encountered the same issue through the same installation scenario.
Regards,
Jan
SQLException Instance not found
I have a web application (JRun) that uses JDBC to connect to a SQL Server 2000 database. During times of heavy volume I get a SQL Exception* stating that the instance on the server is not found. The instance does exist and on a normal day it connects flawlessly hundreds of times.
Anyone know what could be the cause of this?
Thanks for the help,
Matt
* Instance 'MyServer' on host 'MyInstance' not found. (jdbc:inetdae7:MyServer\MyInstance?database=MyDatabase)
I am afraid I can't help you there.
But good luck.
Instance not found in BPEL Console until Process finished
I have two services on the server, where one (asynchronous) service is calling another (synchronous) service multiple times.
WHen creating an instance in the BPEL Console, this instance is nowhere to be found. When trying to see the flow, an error message occurs in the console and on the BPEL server window:
ORABPEL-02152
Instanz in Datenquelle nicht gefunden.
Die Prozessdomõne konnte die Instanz mit dem Schl³ssel "226865cd4e81777c:1a001ff
:10c814abd65:-7f83" nicht aus der Datenquelle abrufen.
Stellen Sie sicher, dass sich der Schl³ssel "226865cd4e81777c:1a001ff:10c814abd6
5:-7f83" auf eine g³ltige Instanz bezieht, die gestartet und nicht aus der Proze
ssdomõne entfernt wurde.
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
at com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
at displayInstance.jspService(_displayInstance.java:111)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Interestingly, the instances of the (synchronous) service, which are called from the mysterious service, are visible all the time and the flow can be viewed while these services are processed.
Does anybody have an idea why this is happening?
Thank you,
Nina
Hi,
I don't understand this behaviour in detail, by now. Could you please state if this is correct?
1. I call an async bpel process A.
2. The message is put in the delivery queue.
3. My client is free again, not blocking.
4. Process A does not show up in Console by now. (If I would call checkpoint(), it would do).
5. A worker takes the message and instantiates the Process A.
6. Process A instance is running now, calling some sync processes.
7. NO dehydration so far.
8. Process A does not show up in Console by now. The called subprocess (sync) do show up, if they are completed.
9. Loop to 6, until Process A ends and makes callback to client.
10. After sending callback, Process A shows up in Console.
11. Now I can monitor, what HAS happened.
I understand, that you can't commit your process data, until a regular dehydration point is reached.
But consequence: I can't even SEE that there exists a process instance from A, until it worked through all the steps above. I just see a swarm of sub processes without an existing parent.
That's the behaviour, you call "intended"?
Workaround would be to do dehydration after each bpel invoke activity. Do you see a problem in doing this?
Thanks in advance!
Torsten
Application Module instance not found in task flow
Hi,
i am working on Oracle Jdeveloper 11g Release 1
I have created a bounded task flow for with following properties:
<transaction id="__14">
<new-transaction/>
</transaction>
<data-control-scope id="__15">
<shared/>
</data-control-scope>
<task-flow-reentry id="__13">
<reentry-not-allowed/>
</task-flow-reentry>I have declared a page flow scope bean in the task flow as:
<managed-bean id="__5">
<managed-bean-name id="__6">trainBean</managed-bean-name>
<managed-bean-class id="__8">oracle.sysman.core.gccompliance.view.library.rule.patchRule.PatchRuleTrainBean</managed-bean-class>
<managed-bean-scope id="__7">pageFlow</managed-bean-scope>
</managed-bean>but when i am trying to access the AM Impl instance from bean methos as below:
public static final String DATA_CONTROLLER = "ComplianceLibraryAMDataControl";
public ComplianceLibraryAMImpl getDataControl() {
DCBindingContainer bc =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
ApplicationModule am = bc.findDataControl(DATA_CONTROLLER).getApplicationModule();
return (ComplianceLibraryAMImpl)am;
}I am getting null pointer exception in ApplicationModule am = bc.findDataControl(DATA_CONTROLLER).getApplicationModule();
I am using the same way to get bean in other task flows as well , so i think the code to get bean is working correctly.
What am i missing in this?
thanks Puthanampatti ,
This is working and i am able to get AM instance from this , But i am not sure what is the difference between:
public ComplianceLibraryAMImpl getComplianceLibraryAM() {
ComplianceLibraryAMImpl am = (ComplianceLibraryAMImpl)ADFUtils.getApplicationModuleForDataControl("ComplianceLibraryAMDataControl");
return am;
Referred methods:
* Get application module for an application module data control by name.
* @param name application module data control name
* @return ApplicationModule
public static ApplicationModule getApplicationModuleForDataControl(String name)
return (ApplicationModule) JSFUtils.resolveExpression("#{data." + name + ".dataProvider}");
* Method for taking a reference to a JSF binding expression and returning
* the matching object (or creating it).
* @param expression EL expression
* @return Managed object
public static Object resolveExpression(String expression) {
FacesContext facesContext = getFacesContext();
Application app = facesContext.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesContext.getELContext();
ValueExpression valueExp =
elFactory.createValueExpression(elContext, expression,
Object.class);
return valueExp.getValue(elContext);
}And my previous approach:
public ComplianceLibraryAMImpl getDataControl() {
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
ApplicationModule am = bc.findDataControl(DATA_CONTROLLER).getApplicationModule();
return (ComplianceLibraryAMImpl)am;
}Why am i not able to find my data control AM from Binding Container????
Hi All,
I have a BPEL process which creates a human task and inserts a record into
custom table(we defined) whenever there is a busines error in BPEL.
I can get BPEL instance id for a given business error in two ways
1. Query wftask table (human task table)
2. Query custom table
some times I see very strange behaviour of dehydration store
I could get instance id from either of above mentioned ways and when I query, I could not find instance in bpel console/ cube_instance table
this happens even for recent instances.
Any clue how they were missing..?
Regards,
Praveen
Hi -
Please search the forum before posting. Two recent threads give your answer (but you can still give me "Helpful" points ;-) ....
Unable to see instances in BPEL console
Process instances do not show in BPEL Console
Regards,
Andy
Repository error:Error -: AIP-50143:Transaction Instance Not fo
Hi Ramesh,
The Scenario is as follows:
1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
2.This JMS queue is used in the B2B internal delivery channel.
3.The message is coming to the B2B , however we are getting an error with the following message.
******ERROR*******
2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164419)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
... 3 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
... 5 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 6 more
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
******ERROR*******
the screnario is working when we directly put the message on to the queue.
Please help .
Thanks & Regards
Sachin (Infosys Team)
Please refer Re: AIP-50025: Repository error ?
Regards,
Sinkar
[From Ramesh Team]
Maybe you are looking for
-
My Mac won't open video clips from my iphone in iphoto in iphoto since upgrading to Snow Leopard. Usually I just used to double click and the video clip would open, now nothing happens. Help please.
-
I would like to have the ending times shown on my monthly calendar. As of now, it only shows the start time. The end times show up on the weekly calendar, but I don't want to print from the weekly view.
-
Unable to install OS X Mountain Lion after HD clean...PLEASE HELP
Ok, I have two issues and hopefully I can have them resolved here. I currently live in Italy, the local Apple store recently replaced my HD about 6-8 months ago and I reinstalled all my files using time machine when I took it home. Recently it began
-
Problem in file to rfc scenario without using BPM concept
hi , I have configured the file to rfc scenatio and in that i have created a synchronous message interface .i have even aaded modules to my sender adapter . I have one sender aggrement , 2 receiver aggrement , 1 interface determination , and 1 rece
-
Authorization Control through BSP
Hello, When we use cv04n from sap gui we are able control plantwise authorization but we are unble to control authorization from BSP using the service CVAW_ENTIRE. Suggest me to achive the above. Regards, Basis Team