DB is not shutting down normally after 'archive log enabled'

Dear All,
Please note that we have enabled the archive log in our test instance DB
and afterwards disabled after one week, then onwards we were not able to shutdown normally the database. We have to do a 'shutdown abort' to close the DB.
What could be the reason for this issue?
Our EBS Version is 11.5.10.2 and DB is 9.2.0.5 in SUN SOLARIS OS
Please update..
Many thanks...

santark wrote:
Dear All,
Please note that we have enabled the archive log in our test instance DB
and afterwards disabled after one week, then onwards we were not able to shutdown normally the database. We have to do a 'shutdown abort' to close the DB.
What could be the reason for this issue?
Our EBS Version is 11.5.10.2 and DB is 9.2.0.5 in SUN SOLARIS OS
Please update..
Many thanks...Do not use just shutdown(or shutdown normal) this command wait all active session disconnect.You have to use shutdown immediate; if this command also hang then post last 30 lines of alert.log there
In additionally refer http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm#i1006543
Edited by: Chinar on Aug 29, 2010 1:33 AM

Similar Messages

Laptop does not shut down completely after upgrading to Windows 10!!

Ever since I installed Windows 10 64-bit, the PC does not shut down completely. The screen gets blank but the power button is still lit up...Have to manually shut down by holding the power button... Same issue anyone? Any solution or workaround? @HP??

I also have this problem, and have resorted to leaving the computer in Sleep mode when not in use. This is OK as a temporary fix, but is not a permanent solution. This is clearly a problem with HP computers and I would hope HP are aware of the need for urgent action to resolve the problem. I also hope that Microsoft gives them full cooperation. HP and Microsoft, are you listening?

Macbook pro seems not to be shut down normally after adding one more user account

after i have created a new user account and i tried to shut it down, it does not appear a white background on the screen to let me know if the pc was in the process. After few second the screen becomes black and it shuts down.
I tried to turn on the pc and it works normally but when i shuts my pc down, the same problem appears.
I have already delected one user account but the problem still appears.
I am not sure is it ok or not?
i am a new user to apple product.

I experienced the same problem. What I noticed that problem seems to occur more often when bluetooth is switched on. For instance, today I wanted to switch off bluetooth connectivity before switching off laptop completely. The bluetooth icon in menu bar from some strange reason froze completely, rest of programs and OS were working fine. When I wanted to switch off the laptop it happened again, it froze and the only way to switch it off was to hold power button.

After using PSCS5, my Mac will not shut down normally.

Whenever I open and use PS, then close it down, my Mac will not restart or shut down; it gets as far as that ‘wheel of death’ which keeps on turning, turning and turning, I presume forever. Force quitting PS permits closing down normally. I have uninstalled PS, reinstalled it to no avail. Thinking that my harddrive might be the problem, I ran it through TechTool Pro and that did not help. So I must have some file responsible for it. No other programs, Adobe or otherwise, cause this. Any ideas?
Mac OS 10.6.8 PS v.12.1

Have you reset your preferences? A reinstall will not affect this file.
Start PS and immediately hold down Cmd + Option + Shift keys. You should get a reset window.

My Macbook pro keeps shutting down right after I log in. The power cord seems to be fine, so I think the computer has enough power. Right after logging in, it shows a grey background with a loading bar that loads only 1/4. Then it shuts down.

I have had my Macbook Pro since 2011 and it has been great until now. Suddenly, I can no longer get past the grey screen just after I log in. The grey screen appears with a loading bar, and the bar get 1/4 of the way complete, then the computer shuts off. My power cord seems to be working fine because this problem still occurred after using another power cord (from another Macbook). Keyboard does not light up, and the small green lights on the left side of the computer do not light up (this is an older version and these light indicate how charged the computer is). It is using the OS X Yosemite and recently had total clearing of the hard drive as it was transferring from one owner to another, so the hard drive isn't nearly full enough to be causing this problem. I've never run into this problem before with other Macbooks.
Help!

Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US

My G4 will not Shut Down, Sleep, or even Log Out.

When I select in the Apple pull down menu to shut down, sleep or even just to log out, it does nothing. If I am running iTunes it will turn off iTunes sound but that is the only reaction I get.
If any one can help, I would greatly appreciate it.
Thank you very much.

Hi-
Welcome to Discussions!
Any new devices, USB, firewire, etc.?
Any new software?
Do you have energy saver settings set to "never"?
File sharing? Internet sharing? Fax receiving? Set to "on" these can alter sleep/power habits.
http://docs.info.apple.com/article.html?artnum=303698
Can you restart?
If the above settings are off, and there are no new devices/software, I would force a restart, boot to the OS install disc, and run Disk Repair/repair on the system drive.

Macbook Pro is not shutting down!

Hey! I got a question : I can't turn off my Macbook Pro in normal way...it works only sometimes! Wenn i want to shut down, i get a blue screen with this "wheel" that shows you something is loading...Don't know how I can explain it better, because my english is not the best
First I thought..hmm okay..if he wants to load something i will let him load...but nothing happens and the macbook is not shutting down even after some hours!
I don't know what to do...hope somebody can help me!

Insert your OS installer disk and reboot while holding down the 'c' key. Then from Disk Utility run Repair Disk.

Premiere Pro CS6 will not shut down - this has occured since installing.

Hello,
I recently installed Premiere Pro CS6 and the program will not shut down normally, I have to always shut it down using the task manager. Should I try re-installing the program?

We cannot know. You are not providing any system information. Such issues are most of the time driver issues where certain DLLs are not released/ unloaded from memory.
Mylenium

Macbook pro does not shut down, blue screen and turning wheel appears

My mac book pro 2011 does not shut down especially after using illustrator or photoshop. It shows a blue screen with an never ending turning wheel. What do i do?

My mac book pro 2011 does not shut down especially after using illustrator or photoshop. It shows a blue screen with an never ending turning wheel. What do i do?

Brtools not shutting down automatically during offline backup

Dear guru'
At our work place in Development system we are getting following issue.
Brtools not shutting down SAP after triggering the Offline backup.
In brtools it's howing database shutting down statement for long time.......... but i'ts not doing .
Keep on showing that ......please give me any solution for that.
It's happenning since last 2 sundays{ Offline backup}. Previously it was working fine.
And remaining systems working fine .
SAP version is ; ECC 6.0, AIX 5.3 & data base 10g.
We are usinfg Veritas netbackup tool.
Thanks & regards;
Rajkumar

I note that you indicate a Snow Leopard OS which if it is the case, it cannot be a 'new' MBP. I assume that this may be an older MBP that is new to you.
Look at these two articles for possible solutions:
https://discussions.apple.com/docs/DOC-3353
http://support.apple.com/kb/TS2570
Ciao.

Help Please B/W G3 crashed and will not shut down...

My old back-up B/W G3 crashed and will not shut down. After the crash my wife who was working on it attempted to restart it and all that happens is the gray screen with the Apple logo and the spinning dial (not multi-colored wheel). This actually happened a few months ago and I've just been using my MacBook instead, but realized there was still some info that we needed to retrieve from the G3.
The only way to shut down is to unplug. I replaced the Lithium 3.6V battery but that didn't help. I tried holding down the apple, command + P, R keys for the 3 chimes and that didn't solve it. I have no clue what else to do. I would love to somehow be able to at least download the info from the hard drive(s), but have no idea if the drives may be corrupted.
Please help with any advice. Many thanks.
RK

You can also try two other methods of Disk repair, without the Install CD:
• Boot up while holding down the Shift key at startup. This forces the Mac to check and Repair its Hard Drive as it boots up, and does not load most extensions. This is called Safe Boot or Safe Mode.
• Boot up Darwin in Single-user mode by Holding down Command and S at startup. When the messages stop scrolling, and it appears to prompt you for input, type:
fsck -fy
which forces it to check the disk, even if it is journaled.
The full story is in this article:
TS1417- Resolve startup issues and perform disk maintenance with Disk Utility and fsck

MacBook Pro (10.7.3) not shutting down after updating to latest iTunes

This is a bit of a strange one, and after searching high and low, I haven't seen any other references to it, so...here goes:
I'm working on a MacBook Pro (13-inch, Mid 2010) running OS X 10.7.3, and the complaint is this: the system will not shut down or eject a connected iPod (classic) or smartphone (Verizon Android phone) after updating to the latest version of iTunes.
I've been troubleshooting this for several days now, and I've tried the following:
1. Created a new admin account and tested from there. No change.
2. Created a backup image of the hard drive, erased & reinstalled 10.7, created temp admin account - issue resolved, but iTunes library unable to open because it was modified by a newer version of iTunes.
3. Ran software update to bring system current (as of 20 April 2012)
4. Issue reappears after software update.
5. Reinstalled 10.7.3 from Recovery partition.
6. Again, issue resolved, but unable to open iTunes library modified by newer version.
7. Update iTunes, issue returns.
I actually did several variations of the erase & install routine, as well as several admin accounts, but the basic gyst of it is that after updating iTunes, the system hangs at the spinning gear on shutdown every single time.
The version of iTunes that is reinstalled with Lion is 10.5.1. I don't know which version between that and 10.6.1 is causing the problem.
Not sure where to go from here, so I figured I'd throw it out to the community.
Thanks.

Well, after throwing my hands up in the air, I returned the MacBook Pro and iPod classic to their owner because I'd held onto them for over a week trying to troubleshoot the issue with no success.
Two days later, she contacted me and told me her iPod was the culprit -- it had some bad sectors on the hard drive. I had thought to check that, but she had data on the iPod that wasn't backed up anywhere, so I back-burnered that until later.
Glad to see I'm not going insane, though. ;^)

After upgrading to 6.1.1 phone is not shutting down manually instead it restart immediately.

After upgrading to 6.1.1 phone 4S is not shutting down manually instead it restart immediately.

After upgrading to 6.1.1 phone 4S is not shutting down manually instead it restart immediately.

VB Process Does Not Shut Down After Attaching VM

I am using the axbridge with Java 1.5.0_02 to embed a swing GUI into a VB app. When I close the VB app, the window disappears, but the process is still running.
I believe that part of the reason why I've encountered this problem lies in the way the VB app is implemented. The app is a COM out-of-process server brought up from Excel using...
Object m_tool = CreateObject("VBapp.ToolClass").
To bring down the app, m_tool is set to "Nothing". COM then realizes that no one is holding a reference to anything in the server the VB app is running as, and the server is shut down by COM. Unfortunately, a thread still seems to be running, so the process doesn't die.
Doing a System.exit() or some other equivalent would certainly take care of the process, but it doesn't make sense for my addition to the greater application to descide when the application should be killed. I need Java to shut down cleanly.
Here's why I think Java is not shutting down cleanly. Upon inspecting the process, I find one thread that is still running. Here's a trace of the stack for that thread.
ntdll.dll!KiFastSystemCallRet
!SetWindowTextW+0x120
!CoUnmarshalInterface+0x13e2
!CoUnmarshalInterface+0x1509
!StgGetIFillLockBytesOnFile+0x10fea
!StgGetIFillLockBytesOnFile+0x109fe
!StgGetIFillLockBytesOnFile+0x108e2
!CoUnmarshalInterface+0x15b6
!CoUnmarshalInterface+0x155f
!DcomChannelSetHResult+0xd55
!NdrProxySendReceive+0x40
!NdrProxySendReceive+0x137
!NdrProxySendReceive+0xcd
!NdrComplexArrayMemorySize+0x695
!CoUnmarshalInterface+0x5bd
!CoUnmarshalInterface+0x55e
!DcomChannelSetHResult+0x993
!DcomChannelSetHResult+0x78c
!StringFromIID+0x194
!StringFromIID+0x175
!CoWaitForMultipleHandles+0xdc62
!OleInitialize+0x66c
!OleInitialize+0x5bf
!CoInitializeEx+0x2b6
!CoUninitialize+0x52
!Java_com_sun_deploy_util_UpdateCheck_handleUserResponse+0x743
ntdll.dll!LdrInitializeThunk+0x29
ntdll.dll!LdrShutdownProcess+0x142
!IsValidLocale+0x8eb
!ExitProcess+0x14
!ThunRTMain+0xae
Notice that it looks like we have a call from Java to native code going on.
Java_com_sun_deploy_util_UpdateCheck_handleUserResponse
I believe the UpdateCheck class has something to do with checking to see if there is a Java version update to be had, but I don't really know for sure. I've tried turning off the auto-update feature through the Java control panel, but that doesn't solve the problem. Does anyone have any info. that might shed some light on what's going on here?

I would definitely have given it longer than a minute.
OS X does quite a few things during a shutdown routine. It clears caches, updates them for the next boot, etc. Sometimes this process can take a bit, especially after software updates or major system changes.
Try shutting down again and see if the problem persists. If the computer doesn't turn off immediately, give it a few minutes before holding down the power button.

I-phone 4 froze after an update, will not shut down and sends all calls to voicemail. Apple logo is the only screen that I get, is there anything I can do?

I-PHONE 4 FROZE AFTER AN UPDATE, WILL NOT SHUT DOWN AND SENDS ALL CALLS TO VOICEMAIL, IS THERE ANYTHING I CAN DO?

Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

DB is not shutting down normally after 'archive log enabled'

Similar Messages

Maybe you are looking for