DB is up Automatically once i started my OS

Hi DBAs,
Whenever I start my Operating System, My db is also up automatically with that, How to stop this, I need to startup my db by my own.
Thanks in Advance,
By baskar

Your database service OracleService<SID> is set to automatically and which is why the database starts up automatically.
Secondly, even though if the service is set to automaitc startup type, there is an entry ORACLE_<SID>_AUTOSTART=TRUE in the regedit. Check this and if set to TRUE, then set it to FALSE.

Similar Messages

Trigger - Execute once database started.-

Hi, It's possible to start trigger once database started even before any DML activity take place.
Basically I need to check & update existing record for with certain condition then update the data.
I should not do this manually using a procedure,... but instead a trigger have to do it automatically.
Is this possible,... does Oracle update any table when it starts up.? Maybe I can use that.
Please help..
Thanks in advance.
E.G
CREATE OR REPLACE TRIGGER check_warehouse
AFTER UPDATE
FOR EACH ROW
DECLARE
BEGIN
IF :new.employee > '4000' THEN
.. ...update... ok='false'
else
... set ok='True'
END IF;
END;

I don't think you need this at the database level. You may want to do this check in BEFORE UPDATE or BEFORE INSERT Table level trigger

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

VMWare fusion turning off automatic virtual machine start

Hello,
Possibly not the best forum for this question, but I hope some of you use VMWare fusion to run Windows on your MAC.
I originally used VMWare fusion eacy windows install to install XP Home as my virtual machine with automatic start up of XP home when VMWare fusion starts. I have subsequently created a new virtual machine for Windows 7 release candidate and want to automatically start this rather than XP when VMWare fusion starts. However I cannot fathom out how to stop VMWare fusion automatically loading and starting XP.
Any ideas? I should probably post this to a VMWare fusion forum, but cannot work out how to do that! I can see the appropriate VMWare forums but cannot see any way to post new threads. I do have a VMWare account.
Many thanks for your help.
Paul Hopewell
[email protected]

Hello Paul,
While Bjorn appears to have answered your question (and if so, you should mark the question "answered" BTW — and Bjorn will get credit for answering!), I'm sure you could use the kind of specialist help available from the Mac-Access mailing list discussion group. There are a number of VMWare Fusion users who also use VoiceOver on that list.
HTH
Archie

How may I automatically stop and start Mail services at a set time please

Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)

launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.stop</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>stop</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>1</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.start</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>start</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>4</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

How do I make it so that itunes doesn't start automatically when windows starts?

How do I make it so that itunes doesn't start automatically when windows starts?

http://support.apple.com/kb/HT5449
http://support.apple.com/kb/PH11443
http://support.apple.com/kb/PH11428

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

Hi,
This folder is probably treated as a program to run at startup.
So you will have to look at the places where such programs are referenced.
For instance, you may have a shortcut to that folder in your Start Menu > Startup.
Or it may be in the Registry.
Click on Start > Execute, the type msconfig and click OK.
This will show you in the Startup tab all the programs launched at startup.
Astugev

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

Error 4000 appears once initializing starts when burning from Itunes. Help!

I have problems burning CDs from my Itunes library. Once initalizing starts, Error 4000 appears. My diagnostics are as follows, can anyone help?
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: RADEON 9000 SERIES - Secondary \RADEON 9000 SERIES -
Secondary
SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomAOPEN__CRW5232/AAO_PRO1.02, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomPLEXTORDVD-ROM_PX-130A1.01, Bus Type SCSI, Bus Address [0,0]
Current user is an administrator.
F: AOPEN CRW5232/AAO PRO, Rev 1.02
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24 32 40 48 52.
The drive CDRW speeds are: 4.
G: PLEXTOR DVD-ROM PX-130A, Rev 1.01
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened
on drive F: AOPEN CRW5232/AAO PRO on CDR media at speed 4X.

an upgrade to iTunes 7.2.0.35 might be worth a try. the itunes versions 7.1.x and 7.2.x have a newer version of the CD Driver DLL (2.0.6.2) than the 7.0.2.16 that you've got.
since it's a custom-built PC, we check the sites of the manufacturers of the individual components to see if there are any updates to those components. there does seem to be a newer version of the firmware (R1.04) available for your AOPEN CRW5232/AAO PRO at AOPEN. i've been assuming (based on your alias) that you're located in Australia, so i was searching in the Asia/Pacific parts of their website for firmware upgrades. if you're not in Australia, it might be worth checking through the correct region, just in case AOPEN has regional differences in their firmware offerings.
in the three fields on this page, select "CDRW drives", "CRW5232/AAO PRO", and "Firmware" to see the firmware offerings for the drive:
AOPEN Asia
with other componentry, check in at ABIT to see if there are any chipset driver or BIOS upgrades available for the motherboard:
http://www2.abit.com.tw/
... and it would be good to see if there are any updates available for your video card at ATI. for additional information on checking on that, see:
Updating the drivers on your Windows PC

I have a gift card and i redeemed it and once i started buying apps it deducted money from my bank account as well as my gift card what do i do?

I have a gift card and i redeemed it and once i started buying apps it deducted money from my bank account as well as my gift card what do i do?

You can't log into any site and see your account's balance. You can log into your account on your iPad via Settings > iTunes & App Store - on my iOS devices my balance shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). You may not see anything if your account's balance is zero.
Not sure what you mean by relationship iTunes has to products. You can buy music, films, TV shows, audiobooks via the iTunes app on your iPad, and apps via the App Store app - what you buy will be tied to your iTunes account.

Rendering 2k1556 to dpx - Once it starts it ain't gonna stop!

I'm rendering Full Frame 2k1556 material in the color timeline. It renders fine... but should I wish to STOP the rendering by using the escape key, it CRASHES!!! So once you start rendering you can't stop without crashing it out!! Nuts!!! Its happening only on 2k material.. it has happened on 2 machines (as I wanted to test another system to see if it was the config of the main system causing the trouble...)
I'm exporting dpx files and not QT movies... it seems to be fine if I export QT movies.
Anyone come accross this... Apple please fix this!!
Thanks

You can try running "Apple Hardware Test" to see if it confirms it (note: AHT is not fail safe)
If CD's came with your computer it is on a CD labeled "Hardware Test" To test with CD, insert the CD and restart holding the "c" key until you see the spinning gear.
If DVD insert DVD then:
1. Turn on or restart the computer.
2. Immediately press and hold the Option key. After a few seconds, the Startup Manger screen appearsThe Startup Manager scans for available volumes.
3. Optional: Clicking the circular arrow rescans for other volumes, including NetBoot Server volumes. You can eject any disc in the drive or open an empty tray-loading drive by holding down the Command (Apple) and Period (.) keys. The Command-Period key combination will also close the drive. After inserting a CD capable of starting up your computer, you could rescan for volumes.
4. Click the startup volume you want to use. "Hardware Test"
If hardware test does not mount or does not run bring the computer to Authorized Apple Repair.
-mj
[email protected]

Have to click on firefox icon more than once to start the programme

Sometimes I have to click on Firefox icon more than once to start the programme. Multi-clicking on the icon does not always start multiple windows ie the programme just isn't starting sometimes on 1st click.
Firefox always opens when using a hyperlink in an email, document etc.
Have tried creating a new quick launch & also re-installing.
Happens on two PCs - 1x Vista & 1x XP
All help is appreciated :)

First let me disclose that I am not an expert nor even much less. However I used to have this slow as a turtle opening of FF until I got rid of my antivirus software which at the time was Avast. I switched to Microsoft Security Essentials and have had no problems since. FF loads in 3 to 4 seconds!

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

DB is up Automatically once i started my OS

Similar Messages

Maybe you are looking for