DB new connections not allowing...
Hi,
when we are running the RMAN backup. DB is not allowing new connections.
we are getting the err ORA-12500 TNS:listener failed to start a dedicated server process. Existing connections are working fine.
How can i resolve this, Please help.
Thanks & Regards,
Thomas.
Hi,
Is your DB running with Shared Server option? If so, then you will need to create another tnsnames to accept dedicated connections and connect using that name.
RMAN needs to be connected using a dedicated connection.
HTH
Regards,
Badri.
Similar Messages
-
Pocket Data: Connection not allowed!
I tried to use WLAN to connect to internet suuccessfully. When I use 3G to connect to internet, I get an error message "Pocket Data: Connection not allowed!". Can someone advise what does it mean - fault at operator side or phone settings.
Thanks!Hi scottxe
You don't mention whether this is brand new phone with a new network provider, as the GPRS packet data server connection has to be activated; this sometimes takes 1-2 days!
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
WIRELESS CONNECTION NOT ALLOWED
My WRT160N router will not allow me to connect via WI-FI. On the Linksys EasyLink Advisor...it will not even allow me to select "Wireless Connection" as an option under "Select a Connection Method.
HELP!pbireton,
What is the operating system of your wireless computers/devices that were not able to connect to the network? I suggest that you set the router's wieless settings. Go to http://192.168.1.1 leave the username blank and type admin as the password. Then go to Wireless tab, set it to Manual and change the Channel to 11. You may actually use other channels like channel 6, 1, 9, and other channels. Choose the onw with the best result.
You may also check this page.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3759 -
I downloaded the new operating OSX Mountain Lion and now my mackbook 2.4 will no longer read or open Adobe Acrobat 5.0. I tried to re-install and it wouldn't allow it. Does the new operating system totally kill Adobe Acrobat 5.0? Is it possible to make it work and if so, how?
You will need to wipe your drive because you cannot downgrade over a newer system. So, you'd need to have a complete backup and either your Snow Leopard install disk or a bootable clone made before upgrading to Lion. If you have the disk, insert it while holding down C key to boot off it, choose Utilities (after language selection), choose Disk Utility and choose erase. After that, the installer will automatically reinstall SL and you can use Setup Assistant to move over your files from your backup. (Note: Mail changed in Lion, so you won't be able to import it - you'd have to do it manually).
If you have a bootable clone, it's even easier: boot with the clone, use Disk Utility to erase the drive and clone your SL system back to your internal drive.
Depending on which route you'll decide on, we can give more detailed instructions. -
N4S Test Drive New License not Allowing Logon (error in license check)
I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards -
New update not allowing autoplay from URI
Hello. We are a group currently developing a spotify app, and we were making use of the fact that you could send a URI to the browser and that song would autoplay from the desktop client. This is no longer possible with the new update, as it just finds the song and doesnt start anything. I hope this is a bug. The song will not start even though nothing else is playing either.
Open.spotify.com always just opens the web player, so that is of no use as well in the app we are making.What is this for a stupid decission to cancel the autoplay functionality? Currently autoplay is not working! There must be the following in: - Open Spotify through a playlist link: Option in the URL for autoplay or just open the playlist- Open Spotify without a playlist link: Option to autoplay the last playlist If this will not be implementes ASAP I will look at Apple Musich and other like Deezer! Spotify is such a great tool, but what you have done here by killing the autoplay functionality was a step back into stone age !!
-
IMessage - New iPhone not allowing iMessage on Mac
I recently got a new iPhone... was using 4s now I have 5s running the latest ios7 software. I am trying to use iMessage on my MacBook Pro v.10.9.2 - for some reason I try to send a message and it says the message failed... when I send an iMessage from my iPhone it does not show up on my Mac. I have the send/recieve regisered for my phone number and my apple ID email... Help! Thanks
> System Preferences... > iCloud > Account Details > are you using the same Apple ID?
-
New connection not suitable for needs
I had total bb installed a few weeks back for my sons online gaming and ever since being installed he has had constant packet loss and dc's meaning that the line is not suitable for what he needs it for. I went ahead and called technical support and they went through the mumble jumble that I expected them to such as check master socket etc...etc.. at the end I was told the problem would be elevated and someone would be in touch, nobody got intouch and I called the cancellation department today only to be told that I'd be charged £400 if I tried to cancel and that the line speed was fine. I tried to explain that the line speed was not the problem but the quality of the line and the constant packet loss and dc's from any form of gaming.
Anyone any ideas on how I can get my problems through to someone that will actually help me, I refuse to pay £400 to cancel a service that is not working correctly.wired or wireless. Plz post your router stats and try a ping test@ pingtest.net posting the results here
I am no expert. Correct me when I am wrong. Learning is good! -
Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?
Solution discovered. Faulty connector cable. Tried a different one and it worked.
-
new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc
My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod. -
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased. -
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter.My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter. -
Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try to download Safari 4.0.3 or newer it says it requires an older version of the OS. What to do?
Update v10.5.5 to v10.5.8
Download and install the combo > Mac OS X 10.5.8 Combo Update
Then restart your Mac.
That should update Safari for you to 5.0.6 and that should help with iTunes.
If necessary, after updating to v10.5.8, you can use the standalone Safari installer here > Safari 5.0.6 for Leopard
Maybe you are looking for
-
My iPhone 5 won't appear in my iPhoto
My iPhone 5 won't appear in my iPhoto library so that I can import my pictures from my phone.
-
JPG won't display in Image box.
Trying to add a logo in JPG format to the top of the form using the Image control, but it won't display the image nor print it. If I use a GIF file it works fine, but looks horrible. I'm new at this, any ideas?
-
Iphone sdk custom pdf viewer in uiscrollview
just like in the subject, I am struggling to get pdf view in uiscrollview. now, first of all - I know I can do it with UIWebView. I am doing so now, but next version of my app - I need to gain much more control, hence need for doing it like that. I h
-
hi all, I'm stuck on a workflow that has 3 branches. I need to perform three different tasks in parallel and then come together afterwards to proceed with the rest of the workflow (perhaps using a junction). Each of the three branches have only one
-
Material Type creation in SAP Netweiver MDM 7
Hi All, i want to know how the Material Types, material Groups and number ranges forMaterial Types created. are these created in Datamanager? Can anyone please provide any documents of the same. Thanks in Advance Ramya Edited by: ramyadixit on Dec 2,