DB operation failed...

A while back someone posted this problem and it was suggested they try
upgrading the client on the PCs involved. I was wondering if this had
solved it before I try tracing which 4 of our 1200 machines are
generating
these errors.
As a reminder, the following error message (and three similar ones
with
different STR files) is appearing on our Zfd3.2 Inventory server:
"Storer: started storing 0008021413CC_1035199580000.STR (28978 Bytes)
could not process 0008021413CC_1035199580000.STR due to DB Operation
failure..will retry"
We can get rid of it by stopping ZFD, deleting the associated STR
files
from the DBdir directory, then starting ZfD again. This eliminates
the
error for about 5 minutes, then it reappears. I know this is caused
by a
bad inventory file (see http://support.novell.com/cgi-
bin/search/searchtid.cgi?/10064993.htm) but as the STR name is the
only
clue, tracking down which PC is a slow process, so before doing it I
would
like reassurance that upgrading or reinstalling the client will sort
it.
Thanks
Martin D'Arcy
IT Manager

On Thu, 12 Jun 2003 18:30:54 GMT, Kai Reichert
<[email protected]>
wrote:
> Hmmm..i suspect a corruption in the database for just those 4
> workstations/records. Question, which one...
> Anything visible in the file ? Are you able to unzip them ?
>
>
I opened the files in Wordpad and discovered that all had something in
common - the user name had an apostrophe (i.e. a ' ) in them. One of
the
PCs is mine!
The fourth line of the file is:
[identification] followed by the PC id and the user name then the
workstation container e.g.
PC10001 MartinD'Arcy.wkstns.dept.org
So,it would seem that the apostrophe in the user's name is causing the
STR
file to be rejected.
Any ideas on how to sort this out? Obviously forcing all users with apostrophes to remove them would work, but I would prefer to keep them
(it's a matter of pride).
Thanks for your help so far, Kai.

Similar Messages

Error on nexus 7k series " operation failed.the fabric is already locked"

getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Outlook 2010 / Exchange 2013: The operation failed. An object could not be found.

Both KB2956128 and KB2956203 causing issue. Removing the patch fixes the issue. I need to know what the best way to remove the patch remotely is. Maybe a SCCM job with this:
msiexec /I {90140000-0012-0000-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
msiexec /i {90140000-001A-0409-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
Please advise. Also looking for time frame for a fix to be published or these updates are rolled back/pulled by Microsoft. Thank you.
Also this is being reported by multiple people with no resolution. Example:
http://community.spiceworks.com/topic/790986-outlook-2010-bug-the-attempted-operation-failed-an-object-could-not?page=1

Hi,
Thank you for your feedback and apologize for the inconvenience caused.
We have heard several reports regarding issues caused by KB2956128. We've escalated this issue, but we're not sure whether and when there will be an hotfix for this issue. Please look out for our official blog articles and install
all available updates released.
Thanks for your understanding and support.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Error - ADD (FAILED : operation failed) while importing a FM in model

Hello,
When I try to import a FM in Web Dynpro Model, it gives me the following Error. What is the error related with. PLease read the error text below? How to resolve this ?
14:19:06.544 ADD (FAILED: operation failed) Raldb_Vari.dtsimpletype.xlf (C:\Documents and Settings\283818\.dtc\0\DCs\pg.com\ezp3\scezp3\dc_model\_comp\src\packages\com\pg\dc_model\models\ezp3model\types\Raldb_Vari.dtsimpletype.xlf)
Regards
Mrinalini

HI
are you able to import some other function module successfully or is this the problem with all of them
Thanks
Sarbjeet

Error when deploying EAR file: Operation failed with error: java:/app/jdbc/

I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
persists, restart Outlook."
The error log message details are as follow:
System
Provider
[ Name]
Microsoft Office 15 Alerts
EventID
300
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T15:54:49.000000000Z
EventRecordID
655
Channel
OAlerts
Computer
Computer-Name.domain.local
Security
EventData
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
301670
15.0.4420.1017
xyfc
0x8004011B
The system is as follows:
Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
OS: Windows 7 (64-Bit)
Application: Outlook 2013 (32-Bit)
The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
Any help would be greatly appreciated.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Verify Operation Failed and Other Issues

Adobe Reader X 10.1.1 is not working correctly on my computer which is running Windows XP Professional Service Pack 3. I have several symptoms.
1. If I am able to open a pdf file on my hard drive I get this error message:
   “Verify operation failed.”
    I hit OK and can read the document fine.
2. Many pdf files on my hard drive will not open. I get the error message:
   “There was an error opening this document. There was a problem reading this document (57).”
    I doubt the document is corrupt because I can email them to my coworkers and they can open it.
3. I can open any document inside of Internet Explorer 8. I get the error message:
   “There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (0:104)”
    It wasn’t running and trying again won’t help. Usually I download the file and try to open it and if I can't I email to a co-worker and continue on. But now I need to fill out a form online that uses a pdf but I can't download it. What can I do now?
I have uninstalled and reinstalled twice with no success. I suspect the root problem is the “Verify operation failed.”
Any ideas.

I found a work around. It requires Foxit Reader, which is free.
Option 1: If you can't open a (.pdf) file in Internet Explorer because it insists on using Adobe Reader which fails on your computer for whatever reason, sometimes you can right click on the link itself and select “Save Target As” which will save the (.pdf) to your hard drive and then you can open it with Foxit Reader. If the file that it tries to save is something other than a (.pdf) such as an (.htm) then try option 2 below.
Option 2: If the “Save Target As” option isn't available, or it tries to save a file type (.htm), then click on the link anyway and let Adobe Reader try and open it. If it fails, the URL to the (.pdf) file should be in the Internet Explorer/Adobe Reader address bar. Copy the URL, open Foxit reader, go to File - Open, then paste the URL of the (.pdf) into the File Name textbox on the Open File pop-up screen and hit "Open".
I've tried changing the default (.pdf) reader to Foxit but sometimes the link to the (.pdf) still insists on using Adobe. Even if I try to use FireFox and Foxit together, there are some (.pdf) links that won't use anything but Adobe.
Sorry Adobe but I don't think it's your software, I think something is wrong with Windows on this computer.

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

Hi,
Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
She is also getting this error when she tries to remove a delegate.
I have tried recreating her mail profile.
I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
She is on Exchange 2010
Any assistance would be appreciated.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

DB operation failed...

Similar Messages

Maybe you are looking for