DB refresh btwn systems running on different OS versions

Our SAP BW 3.5 is running on
- Development Environment - (MS SQL server 64-bit; virtualised)
- Production Environment - (MS SQL server 32-bit)
Is it possible to do DB refresh of Development systen from Production with the above-mentioned environment differences ??

> *Is it possible to do DB refresh of Development systen from Production with the above-mentioned environment differences ??
A copy from 32bit to 64bit is possible:
Note 666805 - MS SQL Server: Migrating from 32-bit to 64-bit
Markus

Similar Messages

How to run 2 different Firefox versions using the same profile

Is it possible to run 2 different Firefox versions using the same profile and still have browsing history saved? I used to be able to do that up until a week ago. What happened was I was using Firefox version 3.6.28(a very old version of Firefox) which I need to use sometimes and then the current version, 36.01. Earlier I would use both my versions of Firefox and the history would be saved if I used both versions but now when version 36.01 came out, its not saving for some reason. Is this a bug? The history is saving during the current session, but say I close out of Firefox and then go back to Firefox, it will still be saved but when I go to my old version of Firefox, the history is saved but then after I close out of that the history on my new current version is all gone and it starts me all fresh, is there a way to get rid of this so that the history will always be saved even if i switch between versions? I could do that before up until Firefox 35.01 but Firefox 36 isnt saving the history from the old version, is this a bug or not? Now I have to create a separate profile for each Firefox so the history I use on the old version is only saved on that version and the history I have on the new Firefox is another profile so that history from the 2nd profile remains but I dont want that. I want to be able to use the same profile so that the same browsing history can be saved using both versions like it was before, I hope people can understand my problem. If not I can further explain, thanks.

@ the-edmeister, I understand that the 2 versions are completely different, however how come the history was saving fine when I switched between firefox 3.6.28 to the current one which was Firefox 32, 33, 34, 35 etc? Like I'm surprised how come now at Firefox 36 this problem started, Firefox 36 isnt that much different from Firefox 35 but yet Firefox 35 was still saving my browser history from the old 3.6.28 version, my 3.6.28 version never upgrades but the new Firefox keeps upgrading whenever there is a new release out automatically and then all of a sudden when the new version of 36.01 came out all my history was gone, so isnt Firefox 35.01 also very much different from 3.6.28 as much as 36.01 is? I hope you got what I meant, thank you for helping.

Oracle Sql Query issue Running on Different DB Version

Hello All,
I have come into situation where we are pruning sql queries on different DB version of Oracle and have performance issue. Let me tell you in brief and i really appreciate for your prompt response as its very imperative stuff.
I have a query which is running on a DB of version 7.3.4 and it takes around 30 mins where as the same query when run on 8i it takes 15sec., its a huge difference. I have run the statistics to analyze on 7.3 and its comparatively very high. Question here is, the sql query trys to select data from same schema table and 2 tables from another DB using DB link and 2 other tables from another DB using DB link.So,how can we optimize this stuff and achieve this run as same time as 8i DB in 7.3. Hope i am clear about my question, Eagerly waiting for your replies.
Thanks in Advance.
Message was edited by:
Ram8

Difficult to be sure without any more detailed information, but I suspect that O7 is in effect copying the remote tables to local temp space, then joining; 8i is factoring out a better query to send to the remote DBs, which does as much work as possible on the remote DB before shipping remaining rows back to local.
You should be able to use EXPLAIN PLAN to identify what SQL is being shipped to the remote DB, If you can't (and it's been quite a while since I tried DB links or O7) then get the remote DBs to yourself, and set SQL_TRACE on for the remote instances. Execute the query and then examine the remote trace files, And don't forget to turn off the tracing when you're done.
Of course it could just be that the CBO got better,,,
HTH - if not, post your query and plans for the local db, and the remote queries.
Regards Nigel

I cant sleep....Running two different JRE versions........

Hey Guys,
I m sure u must be rocking !!! Let me come to the point !! I have following doubts...
1) Is it possible to run different JRE versions on the same machine...? This might be a real life scenario. For example u have java application-1 installed on ur machine which uses JRE1.4. Then u install another java application-2 which was built and tested using JRE1.5. That means u need to have both the JREs on ur machine and User might invoke both the application at the same time which needs respective JREs to be invoked.
If u smart guys guessed it that this guy is coming from .NET back ground and talking about Side by side execution, then u got it right. I m planning to shift the parties !!
2) If above answer is yes, then How can we achive it...?
Thank you guys !!

> I could not think of any better scenario on top of
my mind, But even the examples which I gave are
valid i guess, may be some people will agree with me
in the forum....
"I guess" and "maybe" are far different from "it is always better to not touch the old application and its JRE".
> But i dont understand why u think that these
examples are non sense !!
I work for a multi-billion dollar business in which the JRE of a critical application was upgraded without a problem. According to your suggestion, that's a mistake, but I have a hard time imagining what your justification for that position would be.
> Correct me if i m wrong
anywhere....I m very new to Java,
Considering some different scenarios is good for the imagination. Not to be too harsh, but perhaps counselling people that one should never upgrade the JRE of a business- or mission-critical application should wait until you have some actual experience. :o)
~

How can I run 2 differeny Firefox versions

I have Win 7 x64 operating system.
How can I run two different FireFox versions?
I want to be able to run FF3.6 and FF10
But it seems its set up the way that I can only install one of them.

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
Create a new profile exclusively for each Firefox version.
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Use of different production versions for MRP and costing

Dear PP Gurus ,
We have a scenario in which there are multiple production versions for a particular product .The MRP run as welll as costing run considers only the production version 0001.
We would like the system to consider different production versions for MRP and costing ..that is 0001 for MRP and 0005 for costing .
Is this possible ... if yes ...Kindly suggest the config and master settings for this to happen .
Ram ~

Dear Ramakrishna,
For doing the costing for a specific production version use CK11N,under quantity structure tab key you
can assign the prod.version which is to be used for costing purpose.
While taking MRP if you want to consider the particular Prod.version,assign the demand to the
correct prod.version under schedule line tab in MD61.
Otherwise the system always picksup the first prod.version for MRP.
One more alternative is you have to lock the other prod.versions if you want the system to consider a
particular prod.version.
Check and revert back.
Regards
Mangalraj.S

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

How can I run two different versions of Firefox, the latest does not work with an important site I need to use?

With the latest version of Firefox I cannot send "Quick Mails" to my students using the college's ANGEL system. I had to uninstall it and go to an earlier version. I prefer the newest rev.
Any way to run two different versions. It does not have to be simultaniously. Seems to be a problem on both my Mac and XP systems.
Thanks,
Kim

Currently I don't think there is a way to run two version of firefox at the same time. But you can install Firefox Beta or Aurora instead (which is build for future release for firefox) and help test it! Here's the link:
http://www.mozilla.org/en-US/firefox/channel/

Move SUP role from Server 2008 R2 to new Site System running Server 2012 R2

Is it possible to move the primary SUP role which is currently running on a separate site system under Server 2008 R2 (WSUS 3.0 SP2) and move it to a new site system running Server 2012 R2 using the same SUSDB? I've moved the SUP role
around before by setting up a secondary SUP (using the same DB) then removing the primary SUP role which causes the secondary SUP to become the Primary but that was using the same version of OS and WSUS. With the version of WSUS being different
on Server 2012 R2, I was thinking this may not be possible since the documentation says the WSUS versions must be the same when creating multiple SUP roles.

Hi,
>>I was thinking this may not be possible since the documentation says the WSUS versions must be the same when creating multiple SUP roles.
As the document indicated, "When you have multiple software update points at a site, ensure that they are all running the same version of WSUS." So the scenario you decribed should be not supported.
Reference:Prerequisites for Software Updates in Configuration Manager
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to refresh training system/client

Hi Experts,
I have a ECC6.0 IDES which is used for training purposes.Now the database(/oracle file system) is approaching 100%.
Can anyone let me know how can I refresh the system ( by scheduling any background job? not sure).
Actually the client 001 is to be refreshed.Because training runs on 001 client.
Thanks and Regards,
Moulinath Ray

if you use 001 as the trainig client, then you alter the data in this client, so you cannot use it as a master client.
The 8xx clients are preconfigured IDES-clients and i wouldn't use them as training clients.
You should configure a client (e.g. 001) according to your needs and then create a new client. You can logon to this new client with user/pw sap*/pass (if the profile parameter login/no_automatic_user_sapstar is set correctly, if not adjust and activate the profile and restart your system). Then you can do a client copy from 001 to the new client. When the training is done, just copy 001 again to the new client, so the trainers have a fresh training client.
If you want to remove the client you can use tcode SCC5. I wouldn't delete the data on database level
Edited by: Ulf Brinkmeier on Feb 3, 2009 1:01 PM

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

Your system run out of application memory

your system run out of application memory i get this message pop up and everything freezes

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Help required to put message to a queue running on different machine.

Hi,
I need to put a message to a queue which is on Queue manager running at different server. What I have are name of queue manager, name of queue and message to be put on the queue.
Can you please help me as I m new to this area.
Thanks alot.
Omesh

Your question is not about scripting. It is about how to use a third party system utility. Post your questions here:
http://forum.sysinternals.com/miscellaneous-utilities_forum11.html
¯\_(ツ)_/¯

Fixed assets depreciation wherein local and system currency is differeent

Hi,
We just have a question regarding the Fixed Asset Depreciation if Local and System Currency is different.
Setup of Currency:
Local Currency = USD
System Currency = Peso
During monthly amortization the depreciation is in Local Currency (USD) converted amount at the time of acquisiton if other currency is used. The corresponding system amount which is in Peso will use the FOREX rate based on the posting date of the depreciation run.
What we want is to maintain a correct lapsing schedule of Fixed Assets in both PHP & USD, and both following the accounting standard. Therefore, to be in line w/ the standard, we have to use the historical rates.
Is it possible that when the depreciation was posted in system currency the historical or the acquisition rates will be used not the conversion rate when the depreciation was done?
Thanks,
Janice

Hi Janice,
I don't think that is possible to maintain system consistency. if you could assign FOREX arbitrarily, what is your accounting principle?
Thanks,
Gordon

SAP System run slowly

Dear all,
Our DB Instance always run very slowly and update process
responding time is very long during month end.
I think this maybe due to it runs the database and application.
So I want to delete the DB Instance from Logon Group, and then users
will just access other else three Dialog Instances, is it Ok or what
impact will have ?
How to check PI system connected to SAP ECC Logon Group's IP , but not only
connected to the DB Instance ?
Users always need run many Background Jobs at the day,but I heard other
company almost only allow users run Background Jobs at the night.
Generally, how many background jobs running on one Instance is normal?
Do we have any good ways to control or limit users' background job
setting at the day ?
The dialog and update process numbers of DB Instance are respectively 80 and 6(Update & Update2) , other Dialog Instance is 50:4(Batch:Update)
How is the general ratio between dialog and update process numbers ?
what's the difference between update and update2 process ?
Thanks,
Michael

Hi Michael,
Your company basis team searching why SAP system run slowly.
But don't have your company basis team check your system transactions.
ST01 - Operating system monitor
ST02 - Tune Summary
ST04 - SQL Server performance analysis
SM21 - System Log
SM50 - Process Overview
SM13 - Update Requests.
SM12 - Lock Entries
Maybe long time background working process see u overview tcode SM50 and SM12 kill procees after system speed normaly.
Regards.
Cem ATES

DB refresh btwn systems running on different OS versions

Similar Messages

Maybe you are looking for