DB Restore does not work on MSSMS 2014 under WIndows8.1

When attempting to restore a DB which was backed up on a different machine (same names but SQL EXPRESS 2012) under MS 2014 running on WIndows 8.1 into a SQL Express DB, the following happens:
1. Open Restore task
2. Select Device to get 'Select backup devices"
3. Invoke "Add" and expect to see a browser. Instead, a backup file location is indicated and no browsing is permitted in the "Locate Backup File" Even when the path and file names are just typed in, the Restore will not work.
Any help is appreciated.

Hi,
SQL Server does not allow you to restore or attach a database from a higher version of SQL Server to a lower version of SQL Server in your case from SQL 2014 to SQlL 2012, however you can generate script in SQL 2014 and execute it on SQL 2012.
How to migrate a SQL Server database to a lower version
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Similar Messages

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

IPv6 does not work (MacMini late 2014)

Hello,
recently I bought an new MacMini late 2014 to use this machine as an OpenDirectory server to service request from our file servers and other boxes. Therefore this computer is configured with static ip addresses (v4, v6) within a separate server vlan. Nothing special, other machines (FreeBSD, OSX 10.9) within this segment are working well. The native en0 interface has the two server-lan addresses (v4, v6), an additional vlan interface of en0 is differently configured (v4; v6 only link local. All other initially active network interfaces are deactivated (thunderbold-bridge, bluetooth, WiFi etc.), because they are of no use.
Because of the machine's job as a server, I deactivated all temporary ipv6 address games (sysctl).
This standard configuration simply does not work as intended:
IPv4: communications to servers in the same lan segment are possible, the firewall is reachable, outside connections can be established.
IPv6: HORROR!
Different reactions between "no route to host" (hey, read your kernel tables and use the routes!) and timeouts (it read the kernel routing table, but failed with nd). The ping (ping6) targets are in this first step of testing machines within the same lan segment. Ping-ing of non-local, existing link local addresses is not possible. The MacMini sees itself but nothing more.
All firewalls (via GUI) are turned off, the computer is rebooted again and again. I checked sysctl for mess with packet filters and found an entry for an activation of an ipv6 fw (firewall?!), which I deactivated -- without success.
Software: 10.10 (delivery) plus update to 10.10.1; Apps: OSX Server.
Has anyone ideas what to check further (beside of using a network sniffer)?
Wolfgang

I have a mid-2010 Macmini running 10.10.3 with similar IPv6 symptoms. Not picking up a global address from RA, can't ping6 other link-local addresses, IPv4 working fine. Driving me crazy!

XP windows restore does not work yet all is set correctly

XP windows restore function does not work. All the restore points exist with descriptions of the changes that prompted them. It will let me select them (restore points) and restore process will strart but after rebooting it will ultimatly let me know that it could not restore.
Does the Lenovo Restore and Rescue utility disable this function of XP ? ?
Thanks

Well I have a 6460-8WU that came with Vista and I got the downgrade CD set and tried to restore to XP. The first time it said it failed to restore my system, but it seem to have XP and all the applications that I expected to see. Later I had a problem with the Welcome Windows screen being unavailable... used only the Classic Windows Logon, I called Microsoft and they suggested using their system restore.... which didn't work at all... I tried 5 or 6 different backup files from different days and none of them worked. At that point I decided to use the Lenovo downgrade CDs and format the hard drive restoring everything from scratch. It took me a few tries but eventually I did get it to say that it had successfully restored my system. The items I learned from like 4 failed attempts to restore it are this:
1. Don't try to restore it while in the advanced dock.
2. When the restore process says to remove Disk # x and press OK, remove Disk # x-1 (the currently inserted Disk, and insert Disk # x, and then do not press OK until you wait 20 or 30 seconds or until the little icon of a CD that flashes when Windows reads a newly inserted disk has finished. When I tried clicking OK either before I had actually inserted the next CD or too soon after I had inserted the next CD the process went downhill from there and failed to restore properly.
3. When it seemingly has read all the CD's and says it will now start the restoration process, but you are asked to press Next... well firstly there *is* no Next button to press and the other buttons other than Cancel are greyed out. The solution there is to wait, and wait, and wait... so long that you may think the process has failed and the computer is hung... but it is not. Eventually it will continue from that point.
Aside from that, I notice that there is a new version of the Recovery Application on the Support site, but
if you install the latest Rescue and Recovery 4.20.0511.00 in the readme there are 31 "considerations" listed, which are basically conditions under which it does not work properly or as expected, so I won't be trusting it to recover my system. I will make a Paragon Drive Manager image after I get the updates all installed and use that to restore from.

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Loss of sound (Hard-reset and restore does not work)

Hi,
I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period). Very frustrating as it is about the same time period after purchase. Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product. It is an expensive way of having to re-buy every couple of years for no other reason.
It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related.
Anyone got any advice please? The facts are as follows (and what I have tried).
When it happened?
I was in iMovie editing a movie when all sound went from the speaker. It continued to work with earphones plugged in, but this is now intermittent. I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers). This seems to tell me that it is a software problem. I have no sound on any applications or internet video or music from iTunes. I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
What have I tried?
a) Numerous hard resets
b) changing the side switch's position
c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
d) resetting all settings - this made no difference
e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
I would be grateful for any suggestions. This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
My musings are that:
a) it is definitively a software issue (on account that the speakers work in certain situations only)
b) it appears to be that the software is corrupted in my iCloud back up
c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers. At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again". How can it be right to lose all content because of an Apple system software issue? I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
Please help me and all those others with the same avoidable software problem.
Thank you,
Peter

This is an iPad user to user forum, so you are not addressing Apple.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

DFU and Restore does not work

Firstly, I would like to point out that I am using the latest version of iTunes.
My girlfriend gave me her phone to fix. She has tried to install iOS 7 which does not appear to have worked and she did not make a backup.
When the phone is switched on, the 'Swipe to Setup' message appears. You select a language etc and then are greeted by a message advising to connect the phone to iTunes. When you do this, iTunes basically advises that there is an issue.
I sucessfully started DFU mode and iTunes then recognised that there was a phone in recovery mode and shows the restore button.
After clicking the initial resore button, I am then offered the 'Update and Restore option which I selected.
iTunes then shows the phone being restored:
Restoring iPhone software...
Verifying iPhone Software...
Verifying iPhone Restore...
Restoring iPhone Firmware...
It then tells me it is complete and to leave the phone connected which I do. After a few minutes, iTunes detects the phone and tells me once again that there is an issue. The phone itself, as before; shows the 'Connect to iTunes' message after going through the initial setup of language etc.
Can anyone offer any advice as to what is going wrong with this?
I have tried this procedure no fewer than seven times and it is becoming quite frustrating.
Any help would be very much appreciated.

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

Tried to upgrade the software and my phone crashed...restore does not work

What do I do?! I tried to upgrade and it stopped at the verifing software...it went to the screen with the USB plug and the Itunes icon. When I try to restore it stops at the same point on the preparing to restore and goes to verifing software. What do I DO! (Iphone)

Without more information all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Uppdated to 18.0.2 and suddely all my bookmarks are gone. Restore does not work.

Hi There. Just updated to 18.0.2 and all my bookmarks (16 years!!!) are gone. Tried restoring but Firefox says it can't read the files.
What to do?
Best / Michael

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to reboot the computer or run Firefox once as Administrator.

Invalid password - restore does not work

My son has an Ipod Touch 4th generation. The password has been forgotten or changed. I tried to connect to Itunes and do a restore and it will not work. It starts the process then asks for a password. I have also tried to hold the home key and power button down and connecting, same thing..it starts the process then asks for a password. Any suggestions how to get this reset or restored?

Most likely your iPod hardisk is dying.
Do a Disk Diagnostic, as posted by tt2
https://discussions.apple.com/thread/3110831?tstart=240
This wont fix your problem, but it gives some idea., like getting some professional hardisk repair service or Apps.
Anyway, it would be a very bad idea, to give someone this problematic iPod as a gift to a friend, I would give it to someone I dont like, and let him feel your frustration.
Have a nice day!

Rescue and Recovery restore does not work because of incorrect display size

I am unable to restore my system when booting Rescue and Recovery from the Service Partition or DVD. R&R configures my monitor resolution as 640x480x16 but displays as if there we many more pixels available. The result is that only a portion of the screen is visible and crucial commands are cut off and unusable.
I have read elsewhere that this might be corrected by updating the DisplayResolution parameter in the WINBOM.INI files found in the \MININT and \MININT\SYSTEM32 directories. I have tried this, setting DisplayResolution=1024x768x16, resetting to the default 640x480x16 and even removing the parameter altogether, all to no effect. My monitor always comes up at 640x480 and screens are always cut off.
A puzzling feature of this problem is that Opera help screens do not exhibit this problem. They display at an appropriate size, maximize correctly and so on.
Any help would be appreciated,
Herb
Solved!
Go to Solution.

Hi hgirard,
http://forum.thinkpads.com/viewtopic.php?p=341939#p341939
Does this help?
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

IPod in Recovery Mode Loop, Restore Does Not Work

When I turn my iPod on it says "Connect to your computer. Use iTunes to restore." I connect it to iTunes, restore it and then it says that it is still in recovery mode and needs to be restored.
Nothing I've tried has worked. I've put it in disk mode, I've changed the drive letter so Windows doesn't confuse it with anything else. I tried to go to the Genius bar but they were so backed up the only appointment I could get was for 8pm tomorrow!
Hopefully someone can help!

I've got the same problem with my iPod nano 3rd generation. I'll connect it to iTunes, and it says that an iPod has been detected in recovery mode, and it'll ask me to keep it connected to the computer. It'll then prepare it for recovery, and then tell me there's been an iPod detected in recovery mode. It'll perform this loop several times before I'm given the option to restore it, in which the iPod displays an old version of the iPod interface (I'm talking 1st or 2nd generation of the classic iPod).
Once I'm given the option to restore, it says "Extracting software", finishes, and says that the iPod is being restarted, and then starts with the "iTunes needs to prepare your iPod for recovery. Please leave your iPod connected." loop once again.
I would really prefer to not have to drive to the Apple store to get this problem fixed...

"0" Factory Restore Does Not Work.

Ok, so my laptop has Windows 8 on it currently. When I bought the computer, it came with Windows 7 Home Premium, but I upgraded to Windows 8. It was working fine but I wanted to switch back to Windows 7. So I ran the setup and when it restarted the computer did not start up anymore. I tried the 0 restore but I do not get the restore option. None of the F buttons seem to give me a restore option. I upgraded to Windows 8 via the internet and do not have any recovery disks. Please help.

https://support.toshiba.com/repair
Pay 40$ and start over. Next time you want to fool around, create a image of your C drive with a 3rd party App like Macrium Reflect first before you try experimenting.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

System Restore does not work (Windows 7)

I believe that my internal wireless network card has died although the laptop is only 8 months old, but that's another issue.
I'm running Windows 7, and I tried to have system restore backup to a few days ago. There have been no changes to the computer in this time other than Windows update. After performing system restore and rebooting, I have a message that system restore was cancelled because there was a file in use. It suggested I disable anti-virus protection. After disabling that, I tried system restore once again. The computer seemed to be doing it right, but after reboot, I got the same message that it could not be performed due to a file in use.
I've turned off everything I can think of, does anybody know why might be causing system restore to stop and how it could be corrected?
Thanks

If you cannot do a System Restore from the Recovery Environment (as Archie suggested), then probably the restore points have become corrupt. That's not uncommon.
To repair that, turn System Restore off and then on again. Unfortunately, that removes all the previous restore points.
Turn System Restore on or off
If you post again, tell us which computer you have.
-Jerry

DB Restore does not work on MSSMS 2014 under WIndows8.1

Similar Messages

Maybe you are looking for