DB target status shows "Up" in Grid Control console, but actually "Down"
We've recently installed Grid Control 10.2.0.5. We recently noticed issue regarding false status indicators for several db targets monitored. From GC console, db target show status "Up" (Green Arror) when db is actually down. Should show status as being down (Red Arrow). Is this a known bug? Has anybody experienced this behavior? Can anybody please advise and/or provide solution to this issue?
Thank you in advance.
Best,
Doin
It seems that properties are missing..
Follow the steps,
Login to EM Grid-->Targets > Databases--> Select the radio buttion for PROD Database --> click configure --> Provide dbsnmp password --> click 'Test connection' --> finish
Please reward good answers by marking them correct or helpful...
Similar Messages
-
Problem Load Balancing connections for Grid Control Console on port 80!
I have two OMS and I'm balancing connections for Grid Control Console using a Software Load Balancer according with "Oracle Enterprise Manager Advanced Configuration". I have success where the load balancer is listening on port different to 80. When I configure Load Balancer to listen on port 80(architecture requirement) and distribute load between the two OMS(Port 7779), when login to Enterprise Manager Console the URL on the web browser changes to the port configured for HTTP server (port 7780) wich produces an "unable to connect" error message; and this behaviour also happends in some of the internal links of Grid Control Console too. Any ideas?
Thanks in advance!
Message was edited by:
user463224I got it working, changing the "Port" directive to 80 on httpd.conf on HTTP Server
-
When I install Flash Player version 10.2.152.32 it shows up in the control panel but only ....
When I install Flash Player version 10.2.152.32, it shows up in the control panel, under Programs and Features but the only thing that shows up is the name and version of the product. On the right hand side, the size of the program in megabites is supposed to be displayed but it isn't for flash player. I am using Windows Vista Home Premium and it is a 32 bit operating system and the browser I use is Windows Internet Explorer. Does anyone know why I could be having problems downloading this?
What is the problem you are having? Does Flash Player work? Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
Flash Player is a browser add-on, not a standalone program, and most likely therefore does not indicate any program size in the Control Panel. -
Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840
The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor. Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps.
If you won't lose anything and if it is not a big hassle, I would re-install.
Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10 -
How do I change the language of the Grid Control console?
I get all the menus in Spanish and I would like to use them in English.
But I see no option to change the language anywhere.I could imagine it would be something like this, but I didn't knew the browser was able to change the language. I've done in Internet Explorer using this procedure:
http://windows.microsoft.com/en-US/windows-vista/Change-your-Internet-Explorer-language-settings
Thank you very much. -
IPhone 3GS - volume controls working but actual volume stays the same
Hi
My iPhone 3GS has been exhibiting a strange phenomenon for the last couple of days. The volume in my heaphones is fixed. I can use the volume control buttons or the on screen slider just fine, they're responsive in terms of animation (the buttons show the increasing/decreasing number of white squares and the slider allows me to move the dot and the blue line extends accordingly), but the actual volume only changes when I'm using the speaker, but not when I'm using the headphones. The only actual volume control I have using the headphones is sliding the volume down to zero, which also produces a loud click in the headphones.
The issue is system-wide and as such affects all apps, including Spotify, iPod, VLC, various games and other music/video apps.
The headphones in question are brand new and work fine with other equipment. I've also tried with other headphones, with no change.
Any help would be appreciated. And yes, I've restarted the phone. I've contemplated reset/restore, but I wanted to check if anyone knows of a less time-consuming solution.
ThanksNo, that's not it.
The volume is not locked using the Volume limit, and even if it were, that wouldn't explain why it's fixed at one (rather loud) level. The volume limit function is just there to limit the upper bounds, not set it to a constant level.
Thanks for your reply, though! -
Inactive clients not showing up as inactive in console, but show on inactive client report
Good morning,
I have Client Status Reporting installed, configured, and reporting successful database updates on my SCCM 2007 install. However, the client properties don't list the machines as inactive. For example, one device on the report says inactive
but when I right-click > properties on the system object it lists the "active" property as 1 when it should be 0. Can anyone speculate why this isn't updating? I need to query my inactive machines to take into account my patch statistics
for upper management. If "inactive" isn't 0 then the query won't return any results. Thanks for any help!Yes, I know this is an old post, I’m just trying to clean them up.
There can be many reason for this, but if I had to guess, I would thing that you have two object in the database with the exact same name, one active and one inactive. To solve the report problem I personally, delete all inactive PCs as
soon as I find them in the CM07 database.
http://www.enhansoft.com/ -
BO4 - Data tab shows date as 01/01/1970 but actually now on database
Hi,
Using bo4 webi and noticed whilst report correctly shows date as blank/null in report (no object format in universe) but date in data tab shows as 01/01/1970.
Any idea why this is the case?
ThanksHi,
Is that what you were expecting?. Seems to me like there needs to be patch upgrade.
We had the same issue on SP1 and when upgraded to higher version Dates were showing correct.
Did you compare with BI Launchpad and WebI rich client tool?. Were they showing the 01/01/1970?.
How about when running a BEx query?.
Thanks,
Jothi -
Grid Control performance tab not available when on the target home of ASM
I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?
Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards -
Trying to monitor my sql servers in OEM Grid Control
Hello,
I have Oracle 10g OEM and I want to start monitoring my sql server databases. I've got the plug-in all setup but when it displays under my "Databases" it shows and status "down". My sql server host is running, listener running, and database is up but when I try to "configure" it gives the "Failed to connect to the database: Io exception: Connection reset The Connect Descriptor...." error. Can someone please help??? I would like to know....
1) under the monitor user name is says "dbsnmp" so do I have to create a dbsnmp user on the sql database side?
2) do I keep the same port number (1521) or do I put what the sql server db is listening on (1433)?????? - for the configuration in OEM
3) If i go to the "host" under "targets" it shows that the agent is "up" but the database instance is "down and the listener is "up.
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FSPROLOG.portofsandiego.org)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PMDBSQL" has 1 instance(s).
Instance "PMDBSQL", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Thanks in Advance,,Welcome to the forums !
Not sure what this has to do with database upgrades (the topic of this forum), but pl confirm that you have followed all of the steps in MOS Doc 359413.1 (How To Download and Deploy Microsoft SQL Server Plug-in To Monitor SQL Server Targets From Grid Control )
HTH
Srini -
Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3 -
Error Configuring Database Instance Properties on Grid Control
Hi All,
My Grid Control is 11.1.0.1.0. I have installed and configured agents on other nodes and the OMS and the monitored Hosts are able to communicate. My problem is when I go to targets/Databases, when I select any database and click configure, I get an error "Error occurred while getting information for the specified target. Possible reasons include: the target doesn't exist; connection to the target failed."
I do not know why I'm getting this error because the agent on the OMS server is running, the agents on the monitored targets are all running and when I check the status, I see the agent is uploading data to OMS. Also When i go to targets/hosts, all the hosts are up.
How can I resolve this problem?
Thank you.Eric S,
Could be a Firewall issue. See http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/firewalls.htm#i1005951
Firewalls Between the Grid Control and a Managed Database Target
When you are using the Grid Control Console to manage a database, you must log in to the database from the Grid Control Console in order to perform certain monitoring and administration tasks. If you are logging in to a database on the other side of a firewall, you will need to configure the firewall to allow Oracle Net firewall proxy access.
Specifically, to perform any administrative activities on the managed database, you must be sure that the firewall is configured to allow the Oracle Management Service to communicate with the database through the Oracle Listener port.
You can obtain the Listener port by reviewing the Listener home page in the Grid Control Console.
You can check if Listener port 1521 (if that's the port you are using) is open by:
OMS_HOME/bin/tnsping "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521)))(CONNECT_DATA=(SID=sid)))"
If the database in a DMZ runs on Windows you may want to check note: Oracle Connections and Firewalls [ID 125021.1]
From the OMs-server you can ping the target server by FQDN and short name?
Eric -
Grid Control tuning Advisors for 9i
Hi all,
I'm trying to manage a 9.2.0.1 database with Grid Control 10.2.0.2
Everything is working fine except in the Performance tab, i can't find links for Memory Advisor and Undo Advisor.
This Link below provides a Database Management Matrix and Memory/Undo advisor are listed in 9i version
http://www.oracle.com/technology/products/oem/pdf/em_gc_8i-9i_4.pdf
Any help ?Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards -
LEFT_CLICK_RUN event of ALV Grid Control
Hello,
What is the use of LEFT_CLICK_RUN event of the CL_GUI_ALV_GRID control. I thought it gets triggered when we click on the ALV Grid. But nothing as such is happening.
I had defined the event and then implemented it. I had even registered the event to the Grid Control. But when I am clicking on the Grid control, this event is not gettin triggered.
My requirement is I need to get a popup when I click on a particular field of a ALV Grid Control.
PriyaHi Priya,
Please check demo program BCALV_GRID_06, it shows how to create a context menu when you right-click on the list.
Hope this may help you.
Regards,
Lanka -
OMS unable to reach host in 10g grid control
Greetings Gurus:
I installed oracle 10g grid control r2 and agent on a windows xp machine. on another windows xp machine i installed the agent. i am able to see the host in grid control on the machine with the grid control installed but cannot see the remote machine with only the agent installed. i have reloaded and uploaded, started and stopped the agent using emctl and opmnctl without any issues(this is on the remote machine) but still cannot see the remote host. when i try to secure the agent on the remote machine i get the following:
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
I am fairly new at using grid control and standby database and have had a torrid time trying to fix this problem. your assistance would be greatly appreciated*1. Stop dbconsole*
emctl stop agent
OR
emctl stop dbconsole
*2. Secure it*
emctl secure dbconsole sysman_pwd agent_reg_pwd
*3. Start dbconsole*
emctl start dbconsole
*4. After some time when the dbconsole starts check the status*
emctl status
Ss
Maybe you are looking for
-
Macbook Pro DVI and Video Out woes..
Hey, this seems to be a known issue although specifics are difficult to nail down. I've had my macbook pro since shortly after they were launched and been using the DVI - S-video adapter since day one, and it's been outputting to all TVs with no prob
-
i have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please? ps: sorry for my english :S
-
Hallo, mein sky go funktioniert nur beim imac nicht - im Ipad klappt alles einwandfrei - bei Sky sagt man mir, dass lege wohl an der Software des imac - kann mir jemand erklären, was ich tun muss?
-
Hi, I'm a Java3D new user. I have a problem, because I'm working with objects whose linear measures are milimeters, and when scene is created, the objects are far away from eye position. Otherwise, if objects are very bigs, eye position is very close
-
Want to convert free space to 3rd partition on MBR-partitioned drive
I'm running Leopard 10.5.8 on my Dual G4 MDD. I have an external USB 1.4 TB hard drive that is partitioned with two 512-GB FAT32 volumes and has, therefore, over 300 GB of space available at the end. I'm trying to create a third partition using fdisk