Db to assess if schema or non-schema URGENT please help!!!!!
Hi,
Im referring to SAP notes 151603
The rest of the procedure is fine, but I got stuck with this on Preparation stage:
(1. Establish whether you use a schema system or not.
In the SAP system, choose the menu option "System" -> "Status" and check the value of the field "Owner". In a schema system (MCOD), the owner has the value <sid>, while the value is 'dbo' in a non-schema system.)
That upon checking on "system > status" for the field owner there was no value.
What does this mean?
My platform is
SAP R/3 4.6C
MS SQL 7.0
Microsoft Windows 2000 Advanced Server
Thanks,
Simoun
Hello,
you should open a OSS message in component BC-DB-MSS for this and open a WTS connection to the server. Please refer to my name.
Regards
Clas Hortien
Similar Messages
-
Hi,
I did all the steps, that were mentioned above, but still I am not getting free option.
Please help me out.
ThanksDid you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions. -
I'm trying to get rid of credit card but in billing there is no none option. Please help??
There is no none option and I can't delete credit card please help me!
If the None option is not available... Then... it is Not available...
To check as to why...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Urgent - please help with osb-service bus schema validation.
I have a proxyService runing on osb service bus, when I send wrong input to my proxyservices it react correctly by rejecting it, becuase the requestion is not conform to the schema, but I only get the error message saying that
the Input is does not much, is there a way to get more info about the error ?
like witch fields that cause the error ?The fault variable in your stage error handler will have the approariate information. Just add a stage error handler in the stage you are doing schema validation (make sure that in validate action you are selecting "raise Error on validation failure") and the error handler log the $fault
Also refer -
Re: Validate each xml element against XML schema
Regards,
Anuj -
Register and Generate schema.. please help
Hi All,
I'm trying to do Reverse Engineering( Table to Entity).
I have schema called SCOTT and i want to register and generate SCOTT schema into REPS schema.
I have a problem with register and Generate the schema SCOTT.
I'm connecting as REPS.
I'm writing the code like this...
begin
jr_registration.register('SCOTT');
end;
begin
jr_registration.GENERATE('SCOTT');
end;
when i run this code, i'm getting lot of unwanted tables into REPS Schema.
Does anybody Know, where i'm doing mistake.. ?
Thanks in advance.I have given all the privilages, which are in the list.
And it owns by SCOTT only...
I'm connecting as a Repositiry OWNER...
The Interesting part is, it doesn't show any errors..but i couldn't see any tables in the REPS_OWNER schema.
I'm trying to generate from SCOTT SCHEMA ---> REPS_OWNER
schema.
Any clue.. ?
Thanks in advance. -
Xerces2_6_2 validating with dtd and schema.. please help
Hi I am having trouble validating an xml document using xerces2_6_2
I have a DTD that containes only entity references, and a schema that is used to ensure the xml is valid.
I get this error.
Element type "my root tag" must be declared!
It seems to expect all validation grammer to be in the dtd. I have sucessfully validated with xml spy and oxygen,(oxygen uses xerces too).
This is a real pain I really would lie to take advantage of using schemas, I know I could just use entity references in this form and not have a dtd but this is really not acceptable.
I have tried out all the xerces specific properties and features but this has not worked either.
Perhaps I should implement a validator? Does anyone have any ideas?
thanksMy solution, I thought to take, wasn't the right way, but I have found following thread within the forum
http://forum.java.sun.com/thread.jspa?forumID=34&threadID=527461
The problem you have described points to a dtd error. Considering the thread above, it would make sense. It is a presumption, but perhaps that is because of the new Xerces version. I would try with an older one.
Sorry, that I could help you along. -
when i first created my account i put mu Visa in it, and my son started to use my account on his ipad and ipod, and i would like to remove it, but i can't there is no option to select NONE from my account information...
WOULD SOMEBODY HELP ME PLEASE ?????
I already bought the apps i would like to have , but i can't get rid of it, am so ****** offSee my response to your other post.
-
My mom let me use her credit card as my payment method in the past. She then had her credit card canceled due to an issue with a company. This payment method is no longer valid, so i was wanting to change the payment method to "none" but it is not available as an option. I'd like to know if there is any way to deselect my payment method because i no longer have one. Thank you.
I live in the Mid-West of the United States. This is an existing account and based on the research i have done on this issue, I've discovered that many people have been saying that the "None" option is only available if you're creating a new Apple ID. Also, when i attempt to change the payment to her new credit card(which i have given up on), it is declined. I've tried it many times but it's always unsuccessful, and i just ordered pizza with it last night so there is money on it. Thank you for the attempt to help me. Much appreciated.
-
Have FCP, new Sony HDR-FX7e and an iMac G5 (non intel core) please help
Hi,
This is going to be a bit of a dumb question but i need to ask to be sure of the equipement i have and if i need some new hardawre n my mac to capture the video in HD.
I have an older iMac G5, FCP and a new Sony HDR-FX7e with Belkin 4-6 pin iLink cable.
When i try to capture video that i have filmed in HD 29fps, FCP brings up an error:
Something like: Codec is wrong and also hardware card. I am guessing that the video card is not capable enough as it is the one that came with the mac. Also i am trying to capture the video onto the Hard drive which has 198Gb left. I guess this needs a firewire drive capable of teh right speed.
I am guessing here so please advise as i am so new to this you would not believe and i know it is ambitious of me to expect to plug and play but i can pick it up quickly with the right advice.
Oh, the easy set up i used was on 1080i 60
Thanks,
NeilNeil,
1) Your best bet is to get 5.1 if you do not have it yet. It is a paid crossgrade, but as long as you have the original install discs it is a simple process.
2) The "e" at the end of your camera indicates that it is the PAL version I believe. Do you edit in PAL? or NTSC? Whichever you use just make sure to choose the proper easy setup.
3) Since you have a G5, I would suggest using that as your video machine. You can get around the firewire situation in one of two ways. First, and best in my opinion, is to purchase a second internal SATA harddrive and install it in the spare bay, set this as your "Scratch Disk" and your off. Second, buy a PCI firewire card and install this in a spare PCI slot, then connect your firewire drive to this. Or, if you feel the need, do both.
4) As for why iMovie works and FCP doesn't, the simple answer is the iMovie is a consumer program that has much lower tolerances than the PRO FCP. From what I understand, iMovie does not capture timecode and does not capture audio and video as separate files, among other things. To do these things there must be proper communication between the computer and camera.
5) Another thought is that your camera may be set to downconvert the footage to SD on output. This might also explain why you got something in iMovie and not FCP. Check in the menu system for your cam and see if it is set to downconvert.
K -
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
Hello...I got my Curve 9330 in Oct 2010, it started freezing about 4 months ago, once every few weeks, over time it has gotten worse, so now it freezes every few minutes. Some freezes are "screen shots" where the time is off by a few minutes like its been frozen about 7 or 8 min and the cursor won't move, and some are freezes with the timer like its waiting on something. It takes me about 30 min to do something (txt, email, facebook, anything) that should be a quick 2-3 min check. I have taken the battery out and that works for about an hour, then it goes back to freezing. I have done shift+alt+del to reset and that works for about an hour. I updated my OS, it stopped for about 3 or 4 days then started back up. I have checked to Application free space, there's 158.6MB. I do use my phone a lot, mostly quick check of things throughout the day. This has really gotten in the way and I don't know how to stop it. Any suggestions?
Woot! We're getting there!
Pandora is a BIG resource hog. Really. Any streaming media is.
You need to close Pandora. So try this first off: Do a simple reboot on the BlackBerry in this manner:
With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
Now, once you reboot, give the BlackBerry five minutes to transfer data and communicate with the network, etc., and Use the Application Switcher to see if Pandora is running still? Is it?
If not, in the future when you are through listening to Pandora, choose Menu key > Close, or Quit or Exit. Don't just drop Pandora to the background.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
A Frozen computer+ A Restart= A none working SAFARI PLEASE HELP!
So recently I moved back into my parents home and my sister bought a router. She lives upstairs I live downstairs. When I tried to get internet recently it was successful. So I went to my Mac updates and I had 13 that needed to be performed. After the 13 loaded It asked to restart the computer and I eventually did. But then it started to reload them again. After awhile of me trying to hold the button down and shut the computer down manually I shut it down by shutting my power strip its connected to off and then on. But Now when i restart my computer the 1st screen that pops up states "The Application GoogleSoftwareUpdateAgent quit unexpectedly" and give me 3 options (To Relaunch,Restart, or Ignore) When I relaunch NOTHING happens or it'll take me to a screen that says the program "quit unexpectedly after it was relaunched and resetting the application settings may fix the problem" but when I click the reset and relaunch option still nothing happens.
Also, The programs IPages,Itunes,Ichat,Iwork,dictionary, and safari does not work and what works are things such as Final Cut, Folders on my desktop, a program called Mpeg stream clip, Just like random things work. I cant even do my software updates, it'll just give me the same screen with the same 3 options that dont work! WHat has happened? Did I lose my iPages work? Did I lose the internet? Did the 13 programs Not finish installing is this why this is happening? Do i have to reboot somehow? SOme one please help!. Iam very confused Thank you immensly for reading!Hi Editheworld
it's likely that some of the files on the disk are damaged/missing due to the update not working out.
Most likely - all your personal files are ok... but really, you should have some kind of backup plan for these rare occasions - even if it's just copying the most important things to DVD ( an external HD is nicer, but cost$ more).
As regards what to do about it - I'd suggest an 'archive and install' - you can read about your options at http://support.apple.com/kb/HT1545
& follow that with the 10.5.8 combo update from here
then whatever software update tells you is needed.
Sometimes ... it's just one file that gets messed up & the reinstall can be avoided; but this does require reading/copying the Crash logs (if any) for the application(s) that don't work, then manually replacing the damaged file(s), with no guarantee it will work. Sooo it's easier & likely faster, to go the A & I route. -
Non responding nano please help!!
I accidentally unpluged my nano(1st generation) from my computer without ejecting it first and it froze on the apple screen for a few minutes and then went dead, I couldn't get it to turn on again.I plugged it back into my computer and the apple screen flashed on and off about 4 times and then it went dead again. Now it doesn't respond at all to my computer, it won't connect to iTunes, charge or anything it is completely dead. I tried doing everything it says to do in the troubleshooting. I even tried holding the center button and the menu button at the same time for 6-10 seconds but nothing.I would try restoring it but I can't get my computer to recognize it at all.Im pretty sure it's my nano and not my USB cable too.Please Help!
Have you tried this?:
-- Try toggling the Hold switch. Flip the "Hold" switch on your iPod (located on the top) back and forth several times.
If a "regular toggling" doesn't seem to do anything, try this:
1 - Connect your iPod to your computer.
2 - Now begin to rapidly toggle the "Hold" switch back and forth while your iPod is connected.
3 - After you've done that for a little bit, eject the iPod if needed, then disconnect it from your computer.
Also, see if these articles help:
iPod won't turn on
iPod stops responding or won't wake from sleep
-Kylene -
Constructing my iMovie non chronologically. Please help.
I want to make an iMovie on iMovie 11 to a backing track. However, the only way I seem to be able to import footage into the final cut is chronologically i.e. one section after another. How do I build specific parts/sections of the final cut against specific parts of the music /times and hold them there??? Can anyone help?
This worked for me-
1. Download SmartConverter from the Mac App Store https://itunes.apple.com/us/app/smart-converter/id447513724?mt=12 (i'm sure any video conversion app will work, but i used this one and it worked)
2. Convert your video to Quicktime, even if it is already in quicktime
3. Import the converted video into imovie and it should work like normal; no red tint -
Dispatcher getting stopped due to possible user/schema mismatch.Plz help
Hello All,
I have SAP Netweaver 7.01 ABAP AS installed on windows 2003. Was working fine but I had to have a bug fixed in win 2003 and restarted my SAP machine. Now, dispatcher is not running. Stops after a while. I have tried restarting SAP and the machine but dispatcher is not running. I looked at the dispatcher trace and dev_w0 but could not figure out the reason as I am new to SAP, please provide any pointers to solve this issue. Any general tips is also welcome. Timely help is greatly appreciated!
I have pasted parts of dev_disp and dev_w0 below. If you require more details, please let me know. Thank you very much!
-Arvind
dev_disp:
=========
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 29
intno 20020600
make: multithreaded, Unicode, optimized
pid 3784
Fri Jun 10 19:25:12 2011
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3784) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 29 successfully loaded
shared lib "dw_xtc.dll" version 29 successfully loaded
shared lib "dw_stl.dll" version 29 successfully loaded
shared lib "dw_gui.dll" version 29 successfully loaded
shared lib "dw_mdm.dll" version 29 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Jun 10 19:25:18 2011
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >egsap701_NSP_00 <
DpShMCreate: sizeof(wp_adm) 13632 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
DpShMCreate: allocated sys_adm at 07050040
DpShMCreate: allocated wp_adm at 07052170
DpShMCreate: allocated tm_adm_list at 070556B0
DpShMCreate: allocated tm_adm at 070556E0
DpShMCreate: allocated wp_ca_adm at 0748B760
DpShMCreate: allocated appc_ca_adm at 0748BDE0
DpShMCreate: allocated comm_adm at 0748C420
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0750D2E0
DpShMCreate: allocated gw_adm at 0750D320
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0750D350
DpShMCreate: allocated wall_adm at 0750D358
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
*** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
*** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( egsap701) [dpxxdisp.c 12362]
DpStartStopMsg: send start message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 29
Release check o.K.
Fri Jun 10 19:25:58 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 10 19:26:08 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Workprocess Comm. Area Blocks Fri Jun 10 13:56:08 2011
=============================
Slots: 20, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
<SNIP>
[DpProcDied] Process died (PID:3492 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=egsap701_NSP_00 , sapsysnr= 0, hostname=egsap701
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
<SNIP>
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1496
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3784) [dpxxdisp.c 10924]
Good Bye .....
dev_w0
========
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Jun 10 19:25:18 2011
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 29
M intno 20020600
M make: multithreaded, Unicode, optimized
M pid 2768
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2768) [dpxxdisp.c 1323]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 13632 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
M DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
M DpShMCreate: allocated sys_adm at 07050040
M DpShMCreate: allocated wp_adm at 07052170
M DpShMCreate: allocated tm_adm_list at 070556B0
M DpShMCreate: allocated tm_adm at 070556E0
M DpShMCreate: allocated wp_ca_adm at 0748B760
M DpShMCreate: allocated appc_ca_adm at 0748BDE0
M DpShMCreate: allocated comm_adm at 0748C420
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0750D2E0
M DpShMCreate: allocated gw_adm at 0750D320
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0750D350
M DpShMCreate: allocated wall_adm at 0750D358
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
Y *** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
Y *** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host egsap701
M
M Fri Jun 10 19:25:19 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.29)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 011-123-196-300
C SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.7.06 Build 007-123-197-046
C Database release is SAP DB 7.7.06.007
C INFO : Database 'NSP' instance is running on 'egsap701'
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C *** ERROR => the connected user (SAPNSP) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 2768
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server egsap701_NSP_00 on host egsap701 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jun 10 19:25:19 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2768) [dpnttool.c 334]Hello Rattandeep and Markus,
Thanks for explaining the error to me. I'm still facing the issue though!
My start profile is START_DVEBMGS00_egsap701 and instance profile is NSP_DVEBMGS00_egsap701 (they are included below).
In both profiles, the dbs/ada/schema has been currently deactivated. I get the same errors even after deactivating the parameter in both profiles. I also tried your suggestions by setting parameter values to SAPNSP and then to SAPR3 in both profiles but I'm still getting the same errors.
> the above log shows that you have to change the parameter with schema user SAPR3 instead of SAPNSP
You mean that the SAP system is started by SAPNSP user and since the profile is executed by SAPNSP user, we are getting the error? I don't know about the SAPR3 user or the user's credential. I only use bcuser/ddic RFC user to logon to SAP.
I don't know how to check the table space for SAPR3 database. As far as I know, BRTools is only for Oracle backends. So, I used Max DB database manager tool instead and found that the default NSP database has utilized about 50% data area (disk space). Overwrite mode is on and I have about 100% free log area (also determined through database manager tool). Still have not clue as to how to solve this. Please help. Thanks for your tips so far!
The start profile is as follows :
#.* Start profile START_DVEBMGS00_EGSAP701 *
#.* Version = 000004 *
#.* Generated by user = DDIC *
#.* Generated on = 27.04.2011 , 11:02:57 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
DIR_PROFILE = $(DIR_INSTALL)\profile
_PF = $(DIR_PROFILE)\NSP_DVEBMGS00_egsap701
# Copy SAP Executables
Start_Program_00 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
# Start ABAP database
_DB = $(DIR_CT_RUN)\strdbs.cmd
Start_Program_01 = immediate $(_DB) NSP
# Start SAP message server
_MS = $(DIR_EXECUTABLE)\msg_server$(FT_EXE)
Start_Program_02 = local $(_MS) pf=$(_PF)
# Start application server
_DW = $(DIR_EXECUTABLE)\disp+work$(FT_EXE)
Start_Program_03 = local $(_DW) pf=$(_PF)
rsdb/dbid = NSP
#dbs/ada/schema = SAPNSP
Instance profile is as follows:
#.* Instance profile NSP_DVEBMGS00_EGSAP701 *
#.* Version = 000006 *
#.* Generated by user = DDIC *
#.* Generated on = 27.05.2011 , 11:30:39 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
# SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
PHYS_MEMSIZE = 128
em/initial_size_MB = 10240
em/max_size_MB = 1024
abap/buffersize = 100000
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 60000000 changed: DDIC 27.05.2011 11:29:55
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
#parameter deactivated by: DDIC 27.05.2011 11:11:00
#rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 180000
rdisp/PG_SHM = 100
rdisp/PG_MAXFS = 256
rdisp/ROLL_SHM = 100
rdisp/ROLL_MAXFS = 2048
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 300 changed: DDIC 27.05.2011 11:29:38
rdisp/autoabaptime = 0
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 30000
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
mpi/total_size_MB = 10
rsdb/dbid = NSP
#parameter deactivated by: DDIC 27.05.2011 11:11:22
#dbs/ada/schema = SAPNSP
Maybe you are looking for
-
J_1NFTYPE problem on BAPI_INCOMINGINVOICE_CREATE
English Hi all. I've to create a subsequent debit document, for freight reasons. Im executing the bapi_incominginovoice_create with these parameters: *-----Header parameters: C_X to wl_header-INVOICE_IND , C_RE to wl_hea
-
How can I get the Rockwell font in elements 11?
Is there a way to add the rockwell font to elements 11?
-
Search help for cost center does not work after SP upgrade
Hi, Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen. Thanks
-
Are there any apps that will sync steps in the health app? I do not always have my phone on me and I want my steps to be counted. I appreciate any help. I know fitbit will not.
-
Find authorization check in BAPI implemented in a program
Dear , How can we find the authoruty check in a program in which a BAPI is used.If we search authority check in program click search button and find authority then only the authorization check implemented in program except BAPI is shown not in BAPI.