DB verfied failed

Dear Experts
While excuting db verfied is finishing with error please help in the issue.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000004, user ID DDIC)
Execute logical command BRBACKUP On host KPIDEV
Parameters:-u / -jid VERIF20120110181917 -c force -w only_dbv -p initKPD.sap -m ALL
BR0051I BRBACKUP 7.20 (20)
BR0055I Start of database backup: behqddza.dbv 2012-01-10 18.19.18
BR0252E Function fopen() failed for '/oracle/KPD/sapbackup/behqddza.dbv' at location main-9
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/KPD/sapbackup/behqddza.dbv failed
BR0056I End of database backup: behqddza.dbv 2012-01-10 18.19.18
BR0280I BRBACKUP time stamp: 2012-01-10 18.19.18
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished

Hi,
Just ensure the permission on '/oracle/KPD/sapbackup/ and brconnect.
Perhaps you can try to grant 775 to /oracle/KPD/sapbackup/ and 4775 to brconnect.
Let us know how it goes.
Thanks,
Nicholas Chang

Similar Messages

Apple Hardware Test (AHT) Hard Drive Full Read Fail But SMART Status OK

I have a Mac mini Server from Mid 2010 running Snow Leopard Server.
Ocassionally, it'll freeze up with the spinning beachball wheel for a few minutes. This usually happens when opening an app or performing an app function from the menu bar. It's a pretty clean system—there are not many apps installed.
I suspect it's a hadrware issue. I ran Disk Utility's Permission and Disk Repair. All good. SMART Status is verified. So I ran the Apple Hardware Test. Everything passes except for the Hard Drive's "Full Read"—it fails because "Reading took longer than the average time". The Hard Drive "Short .. test" and "Check SMART Status" pass.
Does anyone have an idea of what's going on here? Is the hard drive the issue? I don't understand how there can be a read issue (or hard drive issue), when the SMART Status is verfied.

S.M.A.R.T isn't perfect. Neither is AHT for that matter, but if it is reporting that reading is taking longer than it should then an impending failure is likely. The occasional "wait cursor" appearance supports that diagnosis.
Consider yourself fortunate in that you still have the ability to back up anything important, and you can plan a convenient time for its replacement.

Oracle 10G Encryption Problem - ORA-28353: failed to open wallet

I have an Oracle 10g R2 database. I would like to use the Transparent Database Encription on a table. However, whenever I try to create or open a wallet I get the following error:
ORA-28353: failed to open wallet
I have a directory called wallet in the $ORACLE_BASE directory. I've checked Meta-Link. I can't seem to find any information on what to do.
Any out-of-the-box ideas.
Thanks,
John

Hi,
Did you follow the procedure described in Oracle 10g documentation titled as 'Advanced Security' about "Using Transparent Data Encryption" (Chapter 3).????
Also , in the advisable actions of Oracle about this type of error is this....
Action: Execute the command again using the correct wallet password or verfying a wallet exists in the specified directory. If necessary, create a new wallet and initialize it.
Regards ,
Simon

Failed to handle capwap control message from controller

Hello,
I am struggling in associating a 1242 AP's with WLC's.
Show version of the AP:
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(25e)JAM2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 11:32 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
AP0019.56b0.855e uptime is 9 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w8-mx.124-25e.JAM2/c1240-k9w8-mx.124-25e.JAM2"
Show inventory of the AP:
AME: "AP1240", DESCR: "Cisco Aironet 1240 Series (IEEE 802.11a/g) Access Point"
PID: AIR-LAP1242AG-E-K9, VID: V01, SN: FCZ10408384
When trying to attach it to a WLC 5508 running 6.0.199.4, the AP keeps on downloading image and power cycling.
When trying to attach it to a WLC 5508 running 7.4.110.0, the AP shows the following message :
Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
*Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7 Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
*Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
Any idea ?
Many thanks !

here is the debug output:
login as: groupwls
(Cisco Controller)
User: groupwls
Password:************
Your password does not meet the strong password requirements.For added security,                                                                              set a new password that meets these requirements. To prevent this message from                                                                              showing again, disable the strong password feature.
(Cisco Controller) >debug pm pki enable
(Cisco Controller) >debug capwap events enable
(Cisco Controller) >*spamApTask2: Jan 30 09:46:38.639: 00:19:07:c6:39:60 DTLS connection not found, creating new connection for 10:64:94:52 (2134) 10:71:142:8 (5246)
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: called to get cert for CID 155224fa
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: called to get key for CID 155224fa
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: match in row 2
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: locking ca cert table
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_alloc() for user cert
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_decode()
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: C=US, ST=California, L=San Jose, O=Cisco Systems, CN=C1240-001956b0855e, [email protected]
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: O=Cisco Systems, CN=Cisco Manufacturing CA
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Mac Address in subject is 00:19:56:b0:85:5e
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert Name in subject is C1240-001956b0855e
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: called to get cert for CID 2f6d981f
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.887: ssphmUserCertVerify: calling x509_decode()
*spamApTask2: Jan 30 09:46:38.898: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (current): 2014/01/30/09:46:38
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotBefore): 2006/10/05/13:05:43
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotAfter): 2016/10/05/13:15:43
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: getting cisco ID cert handle...
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: called with 0x2c058e50
*spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: freeing public key
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Allocated index from main list, Index: 312
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS keys for Control Plane are plumbed successfully for AP 10.64.94.52. Index 313
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS Session established server (10.71.142.8:5246), client (10.64.94.52:2134)
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Starting wait join timer for AP: 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.199: 00:19:07:c6:39:60 Join Request from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.200: 00:19:07:c6:39:60 Deleting AP entry 10.64.94.52:2134 from temporary database.
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Version: = 117730816
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join resp: CAPWAP Maximum Msg element len = 87
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Response sent to 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 CAPWAP State: Join
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 capwap_ac_platform.c:1225 - Operation State 0 ===> 4
*apfReceiveTask: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 0
*apfReceiveTask: Jan 30 09:46:40.201: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 1
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*spamApTask2: Jan 30 09:46:41.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:41.023: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:44.029: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:47.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:50.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:53.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:56.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:59.019: 00:19:07:c6:39:60 DTLS keys for Control Plane deleted successfully for AP 10.64.94.52
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 DTLS connection closed event receivedserver (10:71:142:8/5246) client (10:64:94:52/2134)
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Entry exists for AP (10:64:94:52/2134)
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
*apfReceiveTask: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
*spamApTask2: Jan 30 09:46:59.027: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
*apfReceiveTask: Jan 30 09:46:59.027: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
*spamApTask2: Jan 30 09:46:59.028: 00:19:07:c6:39:60 No AP entry exist in temporary database for 10.64.94.52:2134
*spamApTask0: Jan 30 09:46:59.127: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask3: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask0: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask0: Jan 30 09:47:28.995: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2134
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
*spamApTask0: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask0: Jan 30 09:47:58.856: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask0: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*sshpmLscTask: Jan 30 09:48:10.688: sshpmLscTask: LSC Task received a message 4

OSP fails Help!!!!!

I have sucessfully installed OSP. My probelm is: after building my "component" in OSP and using that staging area to install my software.
I have created a top level component in OSP. On the machine where I made the component (both staged and verfied) the install works flawlessly (as I am ruunig it from the hard drive).
If I copy the entire Stage directory (and all of it's sub directories) to another machine and run the desired setup.exe, I receive the Welcome screen and then I am correctly taken to the file Location screen. I cannot get beyond the File Location screen. When I press the Next button I am given a dialog box that says "There was an error during loading library: standardDialogs". I am given the options to:
1. stop this product
or
2. stop all product installations
Since this is the only product to be installed I am unable to proceed with the install.
Per the documentation I have copied the oracle.swd.jre and oracle.swd.oui directoies from the osp install set. These full directories are at the root(stage) directory level of my components install set. I know they are correctly pointed to in the oraparms.ini file for my product/component because if I change the path to a false value, setup.exe fails immediately saying it cant find ".../jre.exe".
I have tried this install on a WIN200 machine that only has Developer 2000 in it (no OUI). I've tried it on an NT 4.0 server with just the 8.1.6 client (no OUI). I have tried it on an NT 4.0 server with no installed Oracle products. I've tried it on an NT 4.0 workstation with Developer 2000 and with OUI already installed (I also tried the install from the existing OUI on this machine by pointing to the my product.jar). I have tried it on a WIN 98 with no Oracle products installed on it. They all yield the same results as I described above.
So I can only conclude from this that some dll on the "development" computer exists outside of my stage directory that allows the install of my component to work there but not elsewhere. Any ideas what this might be?
TIA,
Ed.

I have the same problem...
Two server 2012 R2 on differents subnets with routing and remote Access and i have the same message.
No problems with ping, and the second and future DC is now on the domain, but it can not reply os make child
can anybody help me?

IMessage verfying the old number.

Hi,
I am having trouble activating iMessage and Facetime, I recently changed my network provider from Airtel to Vodafone india. iMessage was working fine with the old provider Airtel. I got a new number with vodafone and am using that with my 4S.
I have switched off iMessage and Facetime before switching sims from airtel to vodafone, But now when ever I try to acivate imessage on my new number it is still trying to verfy the old number from Airtel instead of Vodafone and eventually fails.. I have tried it a lot of times and and the bill shows a lot of international SMS chanrges but the stuff does not work.. It is as if the old number has been hardwired to the phone, even though in India all iphones are unlocked.
Can any one help with the solution please, I am at my wits end on this one.
Thank you,
Nishanth

I could never get iMessage and Facetime to work on Vodafone India.. It would say activation failed and works only against the email address registered to recieve in the handset. I popped back the Airtel india Sim and reset network settings the registeration went thru in a couple of seconds.
It is definately some thing to do with the telecom operators configuring some settings on their network to enable both iMessage and Facetime and only registered carriers are doing it. Airtel india is a partner of Apple and Vodafone India not.
Honestly it is a bummer that iPhone features are made to work only with selective carrier, Apple tying up with telecom operators is fuine but it would do a lot of good for customers whoi buy their stuff where there is no carrier subsidies like in India.
Make sure that your telecom operator is a partner of apple then all features work like a dream.

Installers failing to write files under library

Many of the installers are failing to write files below '/library'
Everytime i install anything from an installer like ezdrummer etc. it gives a message saying installer couldn't install some files in "/library/audio/plug-ins/vst" or something similar.
I have tried out several things like repairing disk permissions and verfying disk with disk utility. (Verify disk stated that the disk was ok.)
I also have a partition for Bootcamp on my system does it in anyway cause this problem? Does it have anything to do with the fact that it may just not be for the mac os x lion?
Running Mac OS X 10.7.2 on late 2011 macbook pro (i5 processor).

On my Mac I did find a folder /Library/Audio/Plug-ins/VST. I would run the installer again, this time noting the exact file named in the complaint. Then start with /Library and do a Finder File > Get Info at each level of the hierarchy down to and including the file(s) named in the message. On my Mac all the folders in that hierarchy have these permissions: system, Read & Write, wheel, Read only, everyone, Read only. The few files I checked in VST had the same permission, except for a few that my user in place of system and/or admin or staff in place of wheel. What do you see?

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Cannot send email from my Touch (connection to smtp server fails)

Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
Marcelo

Thank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC

BSI ConnectToDataSet...failed

Hi
We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
=Thu Jan 22 11:53:37 2009
=SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
=RfcAccept called
=Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
=Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
=Waiting for ABAP function calls
=Running function srv_Payroll_Tax_Calc_US_80
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling Payroll_Tax_Calc_US
=Running Connect_DB_Payroll_Tax_Calc_US
BSI dataset -> 110
ConnectToDataSource...Succeeded
ConnectToDataSet...failed
Error String -> 7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
=RFC error
operation/code Connect_DB_Payroll_Tax_Calc_US
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status
The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
I don't know what to check about the Dataset, could you please help me?
Best Regards

Yes, it's correct.
I checked it's 8.0.
I think is a problem with the parameters under tf80server.bat.
SET
TF80_CONNECT_STRING=DSN=;UID=;PW
D=;
SET TF80_SCHEMA_NAME=.TF80
REM for SAP trace debugging, uncomment below & see file
errors.txt in gateway working directory
REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
REM else for usual operation
C:\BSI\TAXFACTORY\tf80server.exe %*
I don't know what is the "ODBC_DSN_NAME"
I have the user, password, the database name...
Best Regards

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Running workbook from .bat fails to start application missing CORE40 dll

I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!

Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael

Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

I don't see why not. Do you foresee a special difficulty?

Downloads to documents folder fail due to parallel upload

Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
thanks,
Heiko

Hi Heiko,
Let me explain again:
You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
Best Regards,
Ashwani Kr Sharma

DB verfied failed

Similar Messages

Maybe you are looking for