DB02 is empty , no data there why?

Hi Experts,
T-Code DB02 doesn't have any statistics related to space
i mean it is empty no data.
SAB_Basis 700 sp 13   my database is Oracle10g
i don't know the reason
Thanks
Sh...

Thanks Guys,
Note 1002840 solved the problem
steps:
1- standard job SAP_COLLECTOR_FOR_PERFMONITOR is scheduled hourly  at 0'oclock i mean 9:00 , 10:00 , 11,00 ...
2-tabe ORA_MON_DBCON should contain 1 record as
CON NAME       DEFAULT
  STATUS         A
  MAX RUNTIME    1.800
  MAX UPLOAD     1.000.000
  LOG LIFE       100
  DESCRIPTION    Local Oracle database
3-table DB02_COLL_PLAN should contains entries
if 2 or 3 not happen so do as follow
-call report RSORACUP from SE38 with parameter:
                    CON_NAME = DEFAULT
                    OPERATIO = DELETE
then call it again with
CON_NAME = DEFAULT
OPERATIO = CREATE
after that 2 & 3 will contains entries.
Thatnks
Sherif

Similar Messages

  • Cannot empty iPhoto trash can why ?

    i have 70000 images in trash can but cannot empty iPhoto trash can why ?

    If that 70,000 is your entire library just drag the library to the Trash bin in the Dock and empty it.
    However, if you have other photos in the library that you want to keep the try this:  go into iPhoto's General preference pane and uncheck the Show item counts checkbox:
    and then try emptying the iPhoto Trash bin again. 
    If that fails and you don't use the Rating stars you can do the following: select all of the photos in the trash and Control-click to bringup the contextual menu.  There will be the 5 stars for the ratings.  Select either 5 or 1 to apply that rating to the photos.
    Next create a smart album with the criteria:
    selecting the number of start you applied to those in the Trash bin.
    Move the photos from the Trash bin to the Library and the Smart Album will immediately be populated with those photos. 
    You can now select about 100 photos or so at a time and use the Command+Option+Delete key combination to move them back to the Trash bin and empty it.  Repeat with groups of about 100 or so photos till they are all deleted. Then delete the Trash bin in the Dock to completely remove them from your hard drive.
    OT

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • HT1766 i update my phone today but i loss backup important data & there is no backup in icloud

    i update my phone today but i loss backup important data & there is no backup in icloud

    This feature is only availabe if you are currently running ios 5.
    Update as always.
    Turn on computer.
    Open itunes
    Connect iphone

  • Payload set by API but dataObject remains empty and data does not flow

    Hi,
    We used ADF to programatically set the payload of a new BPM Instance, using JDev 11.1.1.6 and our BPM is also 11.1.1.6. Followed standard documentation.. and payload gets set, and submitted.
    firstTask.setPayloadAsElement(payload);
    wfSvcClient_.getTaskService().updateTaskOutcome(ctx, firstTask, Utilities.INIT_TASK_SUBMIT_OUTCOME);
    When we check in the BPMN for "exiting the initiator activity", we see payload set BUT dataObject with no elements set (empty):
    <auditQueryPayload auditId="505000" ciKey="560017">
    <serviceOutput>
    <element name="execData" detailId="59246" isBusinessIndicator="false"> <value> <task xmlns="http://xmlns.oracle.com/bpel/workflow/task"> ...
    <payload> <PurposeOfFiling xmlns="http://xmlns.oracle.com/OR1/OR1_FORMS_V2/PurposeOfFiling">
    *<purOrganizationId>C078</purOrganizationId>*
    </PurposeOfFiling> </payload>
    ..... </serviceOutput>
    <dataState> <dataObject name="PurposeOfFiling" isBusinessIndicator="false"> <value>
    <PurposeOfFiling xmlns="http://xmlns.oracle.com/bpm/bpmobject/BusinessObjects/PurposeOfFiling">
    *<purOrganizationId></purOrganizationId>*
    </value></dataObject></dataState>
    </auditQueryPayload>
    On entering the second activity (there is nothing between the first and second activity, i.e. direct link), the form comes up empty.
    It appears that in "firstTask.setPayloadAsElement(payload);" the payload is getting set, but the dataObject is empty, and that the dataObject is what is feeding the second activity, and so that is empty.
    Is there a way that we can ensure that the payload "feeds" the dataObject?
    Or alternatively, that the payload "feeds" the second activity?
    How would it be done? Would really appreciate any assistance.
    Thanks!
    Ali.

    Thanks Bill.
    It was something that I had in an earlier build (when I was looking into payload updates) and had removed.. but I've gone ahead and put it back.
    These are my results:
    When the BPM Application Output is wired for dataObject -to- dataObject (which I think is the right way to do), then the dataObject still remains empty.
    When the BPM Application Output is wired for UI -to- dataObject, then the Instance gets suspended due to uninitializedVariable.
    When the BPM Application Output is not wired at all (and Input was never wired to begin with) then dataObject is missing all together.
    One thing I noticed (on just trying the first activity by itself) is that the payload is shown in the UI (i.e. task Payload gets into UI). This was the effect of the "updateTask".
    However, in case of programatic SUBMIT, the payload is still not passed to the next activity. This appears to be once again because the dataObject itself is not being set.
    Also interestingly I found the below BUG request recently (3/22/2013) registered with Oracle, asking for APIs to be able to get/set the actual dataObject:
    BUG 16537745 - ABILITY TO ACCESS PROCESS INSTANCE DATAOBJECT VALUES USING API --> Oracle Business Process Management Suite
    - I don't have access to the details of it, but I'm guessing that their dataObject was not being set, and so API Access is requested to set it.
    However, if there is an existing solution - whereby the dataObject payload can be set (besides the task Payload), I'd much appreciate.
    Thanks!

  • I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

    I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

    Please please help me, if you know how.

  • I filled out my own form saved it and sent through email, when I opened it what I filled out was not there, why would this be

    I filled out my own form saved it and sent through email, when I opened it what I filled out was not there, why would this be?

    What software did you use to fill-in the form (Preview, perhaps) and what software did you use to open it after you emailed it?

  • How do we stop the XSL transform creating an empty tag when there is no inp

    Here is a way to stop the XSL transform from creating an empty tag when there is no input.
    1. Open the XSL Map in Jdev
    2. Go to the Design Tab
    3. Right click the tag in the target tree and select "Add XSL node -> xsl:if"
    4. Create a new link from the source tag (the same that is linked to the target tag) to the newly created xsl:if

    For anyone coming in to find this, I located my answer here:
    [Special Applet Attributes|http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/special_attributes.html#codebase]
    Thanks for reading.
    Sorry for the interruption.

  • Everyone seems to be talking about the Jelly Bean update, however when I check for an update, it says my phone is up to date.  Why is this?

    It seems like every other RAZR Maxx has an update but mine.  What the heck? lol

    Same with mine - got in May. Says it is Factory Certified - factory tested 
    but never used. Claimed not a full charge yet it was 95% charged...what can
    you  do - other models were lesser in quality and features..interesting
    that you had  option to take update - I did not. My email accounts were not
    receiving. Didn't  try nav doc...Hope this one will be better.
    Linda
    <Full name removed for privacy per the ToS.>
    In a message dated 1/3/2013 8:35:25 P.M. Eastern Standard Time, 
    [email protected] writes:
    (http://community.verizonwireless.com/)   
    (http://www.verizonwireless.com/b2c/index.html)     (http://www.verizonwireless.com/b2c/explore)   
    (http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewSho
    pIndex)    (https://wbillpay.verizonwireless.com/vzw/nos/topline.jsp)   
    (http://support.verizonwireless.com/clc/)     
    Re:  Everyone seems to be talking about the Jelly Bean update, however 
    when I check for an update, it says my phone is up to date. Why is  this?
    created by Denvertoad
    (https://community.verizonwireless.com/people/Denvertoad)   in DROID RAZR MAXX - View  the full discussion
    (https://community.verizonwireless.com/message/922462#922462)
    Message was edited by: Verizon Moderator

  • I deleted 4 accounts and the mail app keeps trying to contact the old account server causing thousands of emails to be processed and causing my ISP to charge my account 20-30GB of data. Why is this happening and how do I stop this activity?

    I deleted 4 accounts and the mail app keeps trying to contact the old account server causing thousands of emails to be processed and causing my ISP to charge my account 20-30GB of data. Why is this happening and how do I stop this activity?
    I only now have 3 accounts!
    The old accounts have been deleted but the "Provide Mail Feedback" selection shows:
    Mail Version: 6.5 (1508)
    Total Accounts Configured: 4
    Account: MFAosImapAccount
    8 mailboxes:
    2029 messages, 362315022 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    795 messages, 167250216 bytes
    Account: IMAPAccount
    10 mailboxes:
    4 messages, 1199297 bytes
    0 messages, 0 bytes
    556 messages, 160661538 bytes
    3036 messages, 802090564 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    3019 messages, 801316850 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    10 messages, 3104320 bytes
    server information:
    vendor: Google, Inc.
    name: GImap
    Account: MFAosImapAccount
    10 mailboxes:
    180 messages, 40819804 bytes
    37 messages, 1013784 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    210 messages, 19863404 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    Account: LocalAccount
    24 mailboxes:
    7 messages, 88931 bytes
    294 messages, 2849595 bytes
    1 message, 6558 bytes
    0 messages, 0 bytes
    1 message, 9186 bytes
    26 messages, 744240 bytes
    0 messages, 0 bytes
    2 messages, 7698 bytes
    502 messages, 4398261 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    98 messages, 40510329 bytes
    1 message, 2289 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    0 messages, 0 bytes
    19 messages, 465695 bytes
    1268 messages, 76984849 bytes
    0 messages, 0 bytes
    10 messages, 312327 bytes
    0 messages, 0 bytes
    6 messages, 113325 bytes
    1 message, 10034 bytes
    Total Incoming Message Rules: 1Junk Filter Mode: Automatic
    number of messages evaluated: 50165
    number of messages evaluated as junk: 17332
    number of messages manually marked as junk: 433
    number of messages manually marked as not junk: 471
    training balance: -14
    training debt: 741
    training credit: 727
    2 smart mailboxes:
    1 message, 2 criteria
    0 messages, 2 criteria

    The "LocalAccount" is "On My Mac" and doesn't correspond to an account on a mail server. That all I can tell you from the information provided.

  • HT4623 how can i update my 1st gen ipad when its running at 5.1, i do the update scan and it just says ipad is up to date? why will it not update to 7.1???

    how can i update my 1st gen ipad when its running at 5.1, i do the update scan and it just says ipad is up to date? why will it not update to 7.1???

    iPad 1's can only be updated to IOS 5.1.1. The iPad 1 doesn't have the processing power to handle any higher.

  • Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

    Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

    If all is pink (but you see the desktop), then normally one colour cable is broken - I think blue is off.
    In your case (laptop) the connection to the display seems to be damaged, so the blue information is lost.
    Normally you can test it when you twist the connection between pc and monitor. But I don't know if this works with a laptop.
    V.
    *** Say 'Thanks' with Kudos ***

  • My iphone 4 has droped on ground.,nd frm that day am  getting  signal problem,...!!!there is error of "No Service" or "Searching",...is this coused bcoz of dat damage of iphone my falling n da ground...!!! i came to know dat there is a problem on IC signa

    My iphone 4 has droped on ground.,nd frm that day am  getting  signal problem,...!!!there is error of "No Service" or "Searching",...is this coused bcoz of dat damage of iphone my falling n da ground...!!!
    i came to know dat there is a problem on IC signal antenna,....!!!
    what is the cost of repairng it....!!!
    nd is dat problem occured due to it falling n da ground...!!!

    actually my mobile has no waranty,...!!!nd am using a UK mobile in India,...!!!
    can u plz say dat ,is da signal problem( 'No Service' 'Seaching') is caused due to da damage of the mobile....???
    but,my mobile's outer look was so clear,there is no outer damage for it,...!!!

  • I have unlimited data, so why do I receive the text stating I've used 50% of my monthly data allowance?

    I have unlimited data, so why do I receive the text stating I've used 50% of my monthly data allowance and that my data may be restricted for the remainder of my bill cycle? I've been with Verizon 15+ years and don't think its necessary to be screwed out of my unlimited plan... I heard something last year regarding Verizon limiting the unlimited plan if someone reached a certain point of usage... I'd like to have some clarity on this issue...

    FuzzyBug wrote:
    I have unlimited data, so why do I receive the text stating I've used 50% of my monthly data allowance and that my data may be restricted for the remainder of my bill cycle? I've been with Verizon 15+ years and don't think its necessary to be screwed out of my unlimited plan... I heard something last year regarding Verizon limiting the unlimited plan if someone reached a certain point of usage... I'd like to have some clarity on this issue...
    call *611 or go to a verizon corporate store and fix it. Hopefully it will be an easy fix.

  • I add money to my account , and it is not there , why?

    what do i do?
    i add money to my account , and it is not there , why?

    Try here:
    iTunes Store: Invalid, inactive, or illegible codes

Maybe you are looking for

  • Copying home DVD videos, editing, and creating new DVDs

    Here is the situation: I have the 17" and this is my first Mac to own. I am computer literate with most my experience on Windows and Linux. That being said, I am trying to edit home videos; but they are already on DVDs. I got a LiteOn DVD/VCR combo r

  • Execute SQL query in JavaBean

    I want to execute SQL query in the JavaBean. Is there any problem in the following code. There is no error message, but the database do not update. And I try to use JSP , it is ok. What is the problem in JavaBean ?? How to execute SQL in JavaBean ???

  • Getting following deployment error from Web Dynpro. Please help.

    Feb 17, 2009 3:13:36 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR: [016]Deployment aborted Settings SDM host : tpepqa SDM port : 50018 URL to deploy : file:/C:/DOCUME1/DIPESH1/LOCALS~

  • Missing e-mail on iCloud

    I am just starting to set up my icloud on a 15" Macbook Pro w/ Retina, and I noticed that none of my e-mails are backing up to the icloud. I use: cox.net, and the only thing it backs up is: @icloud.com. How can I get it to back up the cox account? Th

  • J2EE Engine

    Hi, Explain me J2EE engine.If we deploy the Webdynpro-java application at the same time other one deploy the another application,which application take first and what is the procedure to deploy the applications,where we delete the deployed applicatio