DB12 is Now Showing Accurate Data ,

Hi Experts,
Kindly Help me to fix the problem.
I am Using R/3 Entp . with MS SQL DB.
When Checked the Backup status from DB12 and RZ20 it is Showing wrong Information, My backup team Confirmed that they have the Succesful backups.
Not sure why it is Showing Wrong Info. Below is the Information about SAP Server
SAP versions:       610, 620, 630, 640
DB Releases: MSSQL 7.00.699 or higher, MSSQL 8.00
DB Client Lib. SQL_Server_8.00
DBSL Patch Level : 142.
SAP_BASIS 620     0061     SAPKB62061     SAP Basis Component
SAP_ABA     620     0061     SAPKA62061     Cross-Application
SAP_APPL     470     0027     SAPKH47027     Logistics and
SAP_HR     470     0064     SAPKE47064     Human Resources
EA-IPPE     110     0000          -     SAP R/3 Enterprise iPPE
PI     2004_1_470     0009     SAPKIPZI59     R/3 Plug-In (PI) 2004.1 for R/3 Enterpri
PI_BASIS     2005_1_620     0010     SAPKIPYJ5A     PI_BASIS 2005_1_620
ST-PI     2005_1_620     0007     SAPKITLQG7     SAP Solution Tools Plug-In
Kindly Suggest Me if I need to Update any Patch Level etc.
Thanks in Advance
Rgs
Dan

Hi,
look at SAP Note 997660 - DB12 - Backup History shows wrong job history
apply sap basis sp
SAPKB62062
regards,
kaushal

Similar Messages

Ftp now shows a date of april 1 2010 on new files created april 1. 2011

Just started tonight on files being uploaded to host netfirms.ca with fireftp -- also did a ftp://sunsetspeedway.ca no change...
Date shows as April 1, 2010 IE8 ftp shows it correct as April 1, 2011,
Tried in FF4.0 & FF3.6.16 -- seems OK on other hosts but they are in a different timezone...

Hi, what you are experiencing is the difference between file dates (created, modified) and the image file's EXIF data (picture taken). iPhoto uses the EXIF date which is included in the jpg by your camera. OS X's Finder handles file dates somewhat different than Windows operating systems.
I have used Twotade and Miana for batch-changing file dates. Maybe they're of help to you:
http://www.limit-point.com/Utilities/Miana.html
http://www.limit-point.com/Utilities/Twotade.html
Björn

Upgrade to 4.0 shows no data found on tabular forms

Hi,
After upgrading from 3.x to 4.0, an application that had many tabular forms is now showing "no data found" in their regions. A few pages work, while many others do not.
Strangely enough, if I take the same sql in the source box and create a new page from scratch, the new tabular form shows the data properly. So it seems to be an issue with the upgrade. In one case it is a very simple "select col1, col2 etc from sample_table" type of syntax. Nothing complex there.
I wanted to see if others have experienced this.
In looking through the install log, I can not find any errors. The validation step also shows all objects compiled clean.
Thanks!
Erik

Hey David. Good to know I am not the only one.
Just to update some workarounds I have tried.
1) Taking an export from the 3.x application and importing it into 4.0 does not fix the issue (so maybe not a pure upgrade issue?).
2) Copying a page in 4.0 that has the issue and making a new page does not fix the issue.
3) Making a change to the tabular form sql in the source box and applying does not fix the issue.
Still the only workaround is to create a new page with same source sql and setup all the report field properties again.
Thanks,
Erik

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

Show Current Date in Year Format (and now - 1, etc.)

Our form has some column headers that need to change each year, the headings are current year (2010) + previous 3 years. Am trying to programatically add the titles to eliminate modifying the form just to change the year, but not finding how to accomplish, and was checking out some date samples found, but no success yet. My question is 2 part - how/where do I put code, I don't need the user to enter anything, just want a column header. This example below is where I copied the idea from a sample and tried to adjust, it's on the calculate event of a date/time field, and I get an error message that says 'the display pattern "date-{MM/DD]" is incompatible with the object's data format. Define a compatible Display pattern. This display pattern error is the 2nd part of the question. How do I display only the 4 digit year?
year1.rawValue
= num2date(date(), "YYYY")
How do I accomplish this - am newbie on this! Thank you very much!

A: Show Current Date in Year Format (and now - 1, etc.)

1) I typically use a hidden field to capture the current date on the layout:ready event.
2) If year1 is a date object your script is valid but you are probably missing the display pattern date{YYYY} on year1.
If year1 is a text field you could could capture current year in a hidden field as
// form1.page1.currentYear::ready:layout - (FormCalc, client)
$.rawValue = Num2Date(Date(), "YYYY")
where currentYear has the display pattern date{YYYY} and add
this.rawValue = form1.page1.currentYear.rawValue;
to the calculate event of year1.
Steve

My events photo albums have all been renamed with a number followed by IMPRT instead of the date which was how they were originally named. Also the photo now showing on the top of each folder is not actually in that folder. How do I restore?

My events photo albums have all been renamed with a number followed by IMPRT (deleting the date on which they were taken) Also the photo now showing on the top of each folder is taken from a different event and so is not actually in the album it is sitting on top of. This happened when I linked to itunes. Any idea how to restore it to how it looked before?

One thing that I find odd is that iTunes used to rebuild the .itl file when you deleted it. It seems as if the newer iTunes somehow broke this old capability. If you delete the .itl file it can't rebuild it- it simple treats this as if this is a fresh installation and completely ignores the fact that the .xml file has all the data in it. I think Apple needs to bring back this old "feature". Of course, the negative with that was that you lost all of the "Date Added" info along with some other stuff but at least it still kept the favorites info etc. (and I think maybe even the path although I don't believe I ever tried that because my account path has never changed until now).
One side note: I can't find where the iTunes Windows SDK is. I was hoping to try to use that to access the .itl "database" and write a utility to fix this situation. Seems like this has moved from its original location...

Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?

Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

Data disk I used often years ago now shows on desktop as empty .fpbf

DVD-R that I know has data that I've used in the past now shows on desktop as an empty burn folder. Since last using I upgraded from old G4 to Intel Mac Pro w/ OSX 10.7.5.

On further investiagtion of my data disc collection, I found that the CD-R discs open OK; the DVDR discs all show up as Untitled DVD.fpbf.

ICal dates now showing, but items are

Recently, my iCal icon on my doc stopped showing any date on the white page. When I launch iCal, the calendar comes up with all my events, but no dates, no months, just a blank grid with my events.
I synch my iCal with my iPod. Does this have anything to do with it? It cannot be anything I have done in iCal recently, b/c I have been using another paper calendar this year. And the last time, in January, that I went to it, it was functioning normally.
Could this have to do with a recent security update? Or some other iTunes update?
Any help provided will be greatly appreciated.
mothermade

mothermade,
1. Quit iCal, and drag the com.apple.iCal.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences Folder to the Desktop. Then log out/in or restart and check iCal for desired behavior.
2. Quit iCal, and drag the com.apple.dock.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences Folder to the Desktop. Then log out/in or restart and check the Dock for desired/default behavior.
3. Experiment with changing your settings in System Preferences…International>Formats>Choose Customize...>Dates/Times>Show> and change each entry (Short/Medium/Long/Full) to match your desires/requrements.
4. Check for duplicate fonts with Font Book.
;~)

IPad shows "No Data" for Videos when I have movies stored.

Short version:
I've had lots of issues with downloading movies to my iPad from iTunes. When it works, the "videos" section under Settings > General > Usage shows "No data" as if it's not reading the storage. I'll have 6 movies but it shows nothing stored on the iPad.
Detailed version:
I'm on my 3rd or 4th try of "Erase all settings and content" without using an iCloud back up. My 3rd gen iPad will work fine for a month or more after that then start having tons of problems with downloading movies and performace. I'll set a movie to download from iTunes, go do something else and my iPad will become so slow its unusable. The downloads will fail but not alert me, they just restart and loop repeatedly. As of now it's working fine but my third party warranty is running out and I need to decide if somethings really wrong with it or is this an issue with iOS 7. I've taken it to the genius bar, the guy suggested I plug it into iTunes, download a fresh OS and start over again. Since then, its been largely fine. Only one movie failed and tried again then worked. The performance has been fine but I've been burned by this before...its fine for a while then goes to complete crap. I've also had the WIFI showing as connected but will not recieve any data until I simply restart and its fine. This has happened every time I've reset so its not isolated to one glitchy install.
I've asked for help before but no one has ever replied, if someone can give me a suggestion whether to tough it out or make a claim and pay $50 for a refurbished iPad that would be very helpful. If you need more details just ask, I've done all I can think of.

Bump - Can someone please help?

Calendar from Now-Up-To-Date sync wtih iCal and iPhone

I've been struggling to sync my current Now Up To Date calendar with my iphone and I think I have a solution for at least a one-way sync. Here's a copy of my post from another forum. I hope it helps others....
Does anyone else have a better solution?
I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
Description of problem:
Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
Steps to Reproduce:
Here's my steps.
1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
The reply from The Missing Sync's Support:
Hello,
Yes, that procedure should work.
First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

Show Empty Data

I hope there is anybody how could help me:
I create a Bex Query on EA Data (Account with same Key Figures) the Query is its based on a BPC Cube. In rows a only the account and in the columns are the key figures. Now not on all Account are values in the cube. I say in Bex Query that they should show Master Data. In Analyzer there are all accounts also the account without values in the cube.
In crystal I only see account with values. I use CR SP3 and integration Kit SP3. I set u201CShowEmptyDatau201D to True but nothing happened.
As second solution I create a formula in Bex with the value 1, take it in the columns but nothing happened in crystal I only see accounts with values in the cube.
I donu2019t know what I could do.
Second I had problems with the general connection of Bex and Crystal.
In the normal way I create a new report with the Sap Integration Kit Menue. What is the different between this way and the way with the crystal function new report and use a new MDX Connection. In booth ways with the same SAP System I get different connection parameters. Which way is the right way.
In addion if i set Show Empty Data to True, i get ask for the query variables and after it show empty data is set to false automaticly

Hello Ingo,
really??????
But in release notes of SAP Integration KIT XI 3.1 SP3 SAP shows it as one of the big new features. I couldn't believe that this is a fake?? Thats was the basement why we use it.
Is it in BO 4.0 possible to use only Crystal Reports Designer (which Version?) and a BW System with the Integration KIT?? Like in XI3.1??
We only use Crystal Reports Designer with Integration KIT and the Integration KIT in the BW System. Is there an Integration KIT of BO 4.0 with transports for the BW System?
I couldn't believe that it is not possible in XI 3.1. I stay in contact with the SAP and then im really angry because in the documnentation there is the option listed.

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

S.M.A.R.T. was 'Failing'... now shows 'Verified'

Hello,
Yesterday I went into Disk Utility and found that S.M.A.R.T. on my hard drive was reporting 'Failing.' I immediately made a backup of my computer and put it to sleep. Today, S.M.A.R.T. in Disk Utility shows that the Hard Drive is 'Verified.'
How reliable is S.M.A.R.T.? Since S.M.A.R.T. now shows that the drive is 'Verified,' should I trust it? What are your opinions?
My feeling is to simply return the hard drive, since it is still under warranty. The only concern I have is Western Digital not accepting it if they find no fault. I suppose that's more of a question for Western Digital.
Thanks

gershwin_27 wrote:
Yesterday I went into Disk Utility and found that S.M.A.R.T. on my hard drive was reporting 'Failing.' I immediately made a backup of my computer and put it to sleep.
Very good.
Today, S.M.A.R.T. in Disk Utility shows that the Hard Drive is 'Verified.'
Means nothing.
How reliable is S.M.A.R.T.? Since S.M.A.R.T. now shows that the drive is 'Verified,' should I trust it? What are your opinions?
Not at all. No. Get a new hard drive.
My feeling is to simply return the hard drive, since it is still under warranty. The only concern I have is Western Digital not accepting it if they find no fault. I suppose that's more of a question for Western Digital.
Western Digital isn't going to check it. They will just toss it in the trash. I don't know why people hang on to hard drives. The store all your data. When they go, they take your data with them and there is no way to get it back. You wouldn't think twice about returning a defective mouse. Well, the mouse retails for more than the hard drive.

DB12 is Now Showing Accurate Data ,

Similar Messages

Maybe you are looking for