DB13 Backup throws a error

Hi, Experts
When i am taking a backup through DB13 system throwing a error "
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdyfmpzk.afd 2008-06-25 20.45.44
BR0484I BRBACKUP log file: D:\oracle\SSD\sapbackup\bdyfmpzk.afd
BR0252W Function remove() failed for 'D:\oracle\SSD\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\SSD\102\database\initSSD.ora - default assumed
BR0274W File 'D:\oracle\SSD\102\database\CTL1SSD.ORA' not found
BR0101I Parameters
Please help me resolve this problem. Thanks in advance
Thanks & Regards
Venkat

Hi
Have you set the parameters in INITSID.sap
Is your SIDADM is with full permissions for taking backup.
Pls also refer to note 13550
initsid.sap
Hope this must help you if back up is scheduled to disk

Similar Messages

Db13 backup error with mssql as database

Hi
While scheduling the backup through db13 i got the following error msg.i mdoing the backup on disk
Task information ***********
Jobname:
SAP CCMS Full DB Backup of DEV,master,msdb [20090825163455]
Taskname: Step1
Type:      TSQL
DB-Name:   DEV
Lastrun:   20090826 07:00:01
Nextrun:   not scheduled
Created:   2009-08-25 16:34:55.
Command:    dev.sap_backup_databases
             @dblist="DEV,master,msdb",@r3db="DEV",@bdev="db1
           3 backup",@unload=0,@verify=0,@jobname= "SAP CCMS
           Full DB Backup of DEV,master,msdb [20090825163455]
Descript: SAP CCMS JOB
Task history information ***********
For run:   20090826 07:00:00
Status:    0          (failure)   (see DB error log)
Message:   156
Severity: 15
Duration: 0 hours, 0 minutes, 0 seconds
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITY\SYSTEM. DBCC execut
           ion completed. If DBCC printed error messages, con
           tact your system administrator. [SQLSTATE 01000] (
           Message 2528) Incorrect syntax near the keyword '
           WITH'. [SQLSTATE 42000] (Error 156). The step failed.
i have set the backup device name as db13 backup. is that the problem.
Plz help me

Hi Pranav,
Could you please tell us what was the issue so that if any body face the issue again then he will get help from this thread.
Regards
Ashok Dalai

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Db13 backup in ECC 6.0

GOOD DAY!!!!!!!!
Is there anyone who can help me to solve my problem with regards to db13 backup
this is the error message.....
Job started
Step001 started (program RSDBAJOB, variant & 000000000000022, user id
Execute logical command DB6_DBBACKUP on host
Parameters:SSD ONLINE TO /dev/rmt1 BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0 INCLUDE 0 LOGS
ERRORMESSAGE:unable to open file:'/usr/sap/SSD/SYS/global/dscdb6.conf'
External program terminated with exit code 2
DB6_DBBACKUP returned error status E
Job finished
Kind Regards,
DD Howard.....

Dear Barry,
How can my inits6d.sap be the same as inits6d.ora???
The first has backup related /SAP parameters,whereas the second is solely Oracle related parameters.I've tried recreating the .ora file from the spfile also.
Please help..
Have a great day:),
Thanks,
Saba.

Db13 backup restoration

hi experts,
              We are on win2003 and orale10g and we do online db13 backup alloline + redo log .now we have to restore this backup on test instance.can anybody guide me the exact steps involved and documentations if availabe.

Are you trying to restore on same SID or different, if it is same SID then, please find the below steps:
Hope the below gives you a full idea
     "Steps for Restore and Recovery of
SAP system using Brtools"
1     Check the sapmnt directory, SAP kernel and oracle executables
2     check the sap operating system users (i..e, ora<sid>, <sid>adm) with appropriate user IDs' and group membership. (Note: the Uids' of the SAP operating system users and GIDs' must be same as it was before disaster)
3     Check the Operating System groups (i.e., sapsys, dba, oper) with appropriate Group IDs'
4     Check for the Successful backup taken with brbackup and the tapes related to same
5     Check the init<sid>.sap, especially change the tape_address parameter,
6     check the sap directories used by brtools (/oracle/<SID>/sapbakcup, /oracle/<SID>/saparch, /oracle/<SID>/sapreorg, /oracle/<SID>/sapcheck), if necessary create it with ora<sid> as owner and dba as group
7     Connect the tape drive to the system and insert tapes in to it.
8     Check the Backup in the tape using command "brbackup -I show". This will show the backup date, tape label, etc
9     "Restore the backup logs as well as init<sid>.sap, init<sid>.ora saved while backup using backup ""brrestore -n all_log=<alternate location>""
(Note: this takes much time, since it reads the whole tape. So please be patience and donot cancel this step. Also we cannot restore the database without the detailed log)"
10     The above command will restore all the files like init<sid>.ora, init<sid>.sap, backup detail log, summary log.
11     Replace the existing files with the files restored from the alternate location to the original location
12     Check the mount points and permissions for sapdata<n> folders (i.e., owner - ora<sid>, group - dba, file permissions 755)
13     start the datafiles restoration using command - "brrestore -b <detail log name>.<ext> - m full"
14     Brrestore will create the sub directories as required and as in detail log specified
15     Brrestore will start restoring the datafiles as per detail logs
16     Once the datafiles restoration is completed, it restores Controlfile in to sapbackup folder and copies the controlfile as specified in the detail log
17     Check the control_files parameter in init<sid>.ora file and confirm whether the files are at the correct location. If the controlfiles are at different locations, check the path of all files and change the control_file parameter in init<sid>.ora
18     Mount the database, to do this execute sqlplus "/ as sysdba" and then in the sql prompt type sql script "startup mount"
19     This will mount the database if control files are in correct location as in init<sid>.ora and are not corrupt
20     Restore the archive logs from the archive logs backup taken with brarchive.
21     To Restore, insert the archive log tape in the tape drive
22     Ensure that the tape address parameter tape_address is correct in init<sid>.sap
23     To restore archive logs we have to restore summary as well as detail log of archive log backup
24     To restore the archive log backup log, execute the command - brrestore -n all_logs=<alternate location>. This will restore all logs saved in the backup like init<sid>.sap, init<sid>.ora, summary and detail log
25     Copy the summary and detail log from alternate locaiton to original location i.e., /oracle/<SID>/saparch
26     Execute the sql script recover database using backup controlfile until cancel; in the sql prompt. This command will show the archive log file that will be necessary for recovery of the database.
27     To restore the archive log files, check in detail log file the archive logs saved in the backup. To restore the logs backed in the backup execute, brrestore -a <archive log a>-<archive log b>. This command will restore the archive logs from archive log a to archive log b to default location /oracle/<SID>/oraarch
28     Start applying the archive logs using sql script - recover database using backup controlfile until cancel; This will give the archive log file, check whether we have all the logs along with the file specified
29     Restore the all the archive logs available in the backup. Follow steps 21 to 25
     Note: if we had added any datafile to any tablespace. The archive log will be switched from online redo log to offline redo log file (if we use brtools to add or extend datafile). When we try to add this archive log file, then we get an error, ORA-01111: name for data file <id> is unknown - rename to correct file and the correct file name with location will be displayed. But if we have extended the datafile, then applying the archive log of that time will extend the file automatically
     To solve this problem , check the alert log file, the below error will be displayed
     ORA-01244: unnamed datafile(s) added to controlfile by media recovery
     ORA-01110: data file <file id>: '/oracle/<SID>/sapdata<n>/<sid>_<no.,>/<sid>.data<no.,>'
     Check the unnamed file in v$datafile table using query "select FILE#, NAME from V$datafile where FILE# = <id>;"
     This will show the name of the file as in the controlfile. We have to rename the file and create the physical file; to do this execute "alter database create datafile '/oracle/<SID>/920_64/dbs/UNNAMED00<file id>' as '/oracle/<SID>/sapdata<n>/<sid>_<no.,>/<sid>.data<no.,>';"
     Start Applying the archive logs using sql script - recover database using backup controlfile until cancel;
30     Open the database using sql command - "alter database open resetlogs;", this will open the database in read/write mode and reset the archive log number to 0, the archive log generated will be started with number - 1
31     Check the connectivity of the Database with sap using a tool given by SAP i.e., R3trans. Which checks the connectivity to the database. Start the listener - lsnrctl start and execute R3trans -d. The output of the r3trans -d should be 0, else analyze the error and go ahead.
32     If the R3trans tool return code is 0, then start sap.To start sap switch to user <sid>adm (use su - <sid>adm give the password if prompted) and execute startsap. This will start both database if not started and then sap
34     Brbackup doesnot take the backup of the tempfiles in any of the backup. So after opening the database we have to create the temporary datafiles. To add tempfiles execute the sql script : "alter tablespace PSAPTEMP add tempfile '/oracle/<SID>/sapdata<n>/temp_<no.,>/temp.data<no.,>' SIZE 6144M;". This will add a temp file of size 6GB
Hope this helps you
Regards,
Kishore
Edited by: Kishore Soma on Aug 20, 2008 3:02 PM

How to throw Custom Error message in Portal

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process:         SafariDAVClient [5937]
Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier:      SafariDAVClient
Version:         106
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     SafariDAVClient [5937]
User ID:         501
Date/Time:       2014-02-02 15:40:22.026 -0800
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?

feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

Query throws an error while drilldowning a particular column in production

Hello Gurus,
There is an issue in a query when I run it on portal and when I try to drill down one particular column, it throws an error. I am pasting the error message below for your reference. This query works fine when I run in Bex. It also works fine when I run it on Quality portal. It only throws an error when I run it on production portal. I have got the patches and PI checked with BASIS team, everything seems to be fine.
Please help me out with this issue.
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRK0 and form LRECH_01-01- (see long text)
Regards,

Hi,
There are a couple of threads on the same issue.
Refer to these, just might be handy.
Re: Uncaught_exception in Report Designer
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report
Good Luck!
Sandeep Tudumu

Editable ALV - how to throw an error message for a specific line & field

Hi all,
I've implemented an editable ALV and also the ON_DATA_CHECK event to check the values, entered in the ALV. So this works fine and I can check the values.
But now, I want to throw an error message corresponding to the field in the ALV, where the error occured.
How can I throw this error message corresponding to a specific line/field in the ALV?
I was using REPORT_ATTRIBUTE_ERROR_MESSAGE and REPORT_ELEMENT_ERROR_MESSAGE but without success.
I'm also using a loop over the "CHANGES" in the ALV and within this loop, I use
elem_alv = node_alv->get_element( index = <change>-element_index )
to get the element for the message.
CALL METHOD lo_message_manager->REPORT_ELEMENT_ERROR_MESSAGE
EXPORTING
    MESSAGE_TEXT              = 'my message'
    ELEMENT                   = elem_alv
*    ATTRIBUTES                =
*    PARAMS                    =
*    MSG_USER_DATA             =
*    IS_PERMANENT              = ABAP_FALSE
*    SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CTXT_ELEMENT
*    MSG_INDEX                 =
*    CANCEL_NAVIGATION         =
*    IS_VALIDATION_INDEPENDENT = ABAP_FALSE.
2.) is it right, that for an editable ALV, I can't use the WDDOBEFOREACTION to do the checks?
If I try to use this, I can't get the values of my ALV table to check it.
Thanks,
Andreas

Hi Andreas,
I have tried to replicate your problem and I am getting the desired output. I have a row by name TEMP_NEW in my ALV and I want to throw an error message whenever the user enters a value of 4 for that particular field. Please find my coding as below. The important thing is where we perform the actual comparison between the r_value and 4. r_value is defined in SALV_WD_S_TABLE_MOD_CELL as reference to type DATA. So suppose the user enters a value of say 3 in the TEMP_NEW field of the ALV then r_value would contain 3 but if you observe its type in debugging mode it would be as TYPE REF TO I and not TYPE I. So you cannot directly say something like:
"if ls_modified_cells-r_value = 3" as this would lead to a syntax error. Define a field-symbol say <temp> and then use it to get the actual value into it by saying like:
ASSIGN ls_modified_cells-r_value->* TO <temp>.
Then you can use this <temp> for comparison in your IF statement like:
IF <temp> = 3.
Find the entire coding as below:
METHOD check_data.
DATA: lr_node TYPE REF TO if_wd_context_node,
        lr_element TYPE REF TO if_wd_context_element,
        ls_modified_cells TYPE salv_wd_s_table_mod_cell.
FIELD-SYMBOLS <temp> TYPE data.
" get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
lr_node = wd_context->get_child_node( name = 'NODE' ).
LOOP AT r_param->t_modified_cells INTO ls_modified_cells.
    lr_element = lr_node->get_element( index = ls_modified_cells-index ).
    IF ls_modified_cells-attribute = 'TEMP_NEW'.
" Get the value extracted into the field symbol from the reference variable
      ASSIGN ls_modified_cells-r_value->* TO <temp>.
" Use the value present in this field-symbol for your comparison
      IF <temp> = 4.
" report message
        CALL METHOD lo_message_manager->report_attribute_error_message
          EXPORTING
            message_text   = 'Sample message text'
            element        = lr_element
            attribute_name = ls_modified_cells-attribute.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
Hope this helps resolve your problem.
Regards,
Uday

Unable to complete backup. An error occurred while copying files to backup

I erased and restarted my time capsule numerous times and tried re backing up. Little more then have way through i get this message "Unable to complete backup. An error occurred while copying files to the backup volume." With about 80gb left out of 198. On the apple support page ALL it says is ".Restart, then try the backup once again" Here is the link http://support.apple.com/kb/HT3275#3 ....PLEASE Help Me .. What Do I do.. I have read almost every topic and article regarding this ERROR 11 and found nothing and i tried i think all all..The new snow leopard comes out tomorrow so im going to install that and try again.. also if this does not ever work is there a way just to store all my music and photos in the tc and restart my whole computer the archive my files from there ??
All Your Help Will Be Greatly appreciated as i tried to do the research on my own.. This is my last resort
THAN YOU
RAM
Torrance Los Angeles Ca.

Hi there!
I am having exactly the same problem. I have experienced this before, I reset TC and it worked again, but it is not working now. Have you installed Snow Leopard? Did it solve the issue?
Thanks,
Adriano
Malaysia

Cffunction, onSessionEnd throwing an error, please help

Hello;
I am using an application.cfc file to run my web site. I
added an argument for onmissingtemplate and when I did that, it
made my onSessionEnd statement throw an error:
this is my statement:
<cffunction name="onSessionEnd" returnType="void">
<cfargument name="theSession" type="struct"
required="true">
<cfset var duration =
dateDiff("s",arguments.theSession.created,now())>
<cflog file="#THIS.name#" text="Session lasted for
#duration# seconds.">
</cffunction>
and this is the error:
Invalid CFML construct found on line 85 at column 1.
ColdFusion was looking at the following text:
<
The CFML compiler was processing:
< marks the beginning of a ColdFusion tag.Did you mean LT
or LTE?
The error occurred in C:\Websites\4npp8b\Application.cfc:
line 85
83 : </cfcomponent>
84 :
85 : <cffunction name="onSessionEnd" returnType="void">
86 : <cfargument name="theSession" type="struct"
required="true">
87 : <cfset var duration =
dateDiff("s",arguments.theSession.created,now())>
I don't know if this will make a difference, but here is my
onsessionstart function:
<cffunction name="onSessionStart" returntype="any"
output="true">
<cfset SESSION.created = now()>
</cffunction>
I can't figure out what I did wrong to make it throw that
error. Any ideas?
CFmonger

never mind, I figured it out. sorry to bother.

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

HT3275 Got the message "Unable to complete backup. An error occurred while creating the backup folder."

My time machine backup has stopped working. I received an error message that is not one listed on the support page: "Unable to complete backup. An error occurred while creating the backup folder." I am on a new MacBook pro running Mountain Lion and using a 1 TB Passport drive as a time machine backup. Running DiskUtility finds no problem on the Passport.

See #C10 in Pondini's excellent Time Machine Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Validation error for non-null throws false error condition

I am trying to perform a DML (INSERT) with a form element (textbox) that has been disabled on the form.
The objective is to allow the user to:
1) disable a form element using javascript when a radio element is selected - works OK using an onclick event
2) user clicks a button to ENTER (perform a INSERT DML) - here the validation throws an error but I have enabled the previously disabled form element and I have used $x_Value() to input a value into the form element by onsubmit event on button.
If I remove the validation error trap the DML saves the appropriate value.
I can create two buttons and it works:
1 button to enable fields that were previously disabled
2 button to perform DML. (works if after button 1 I set focus on any form field with my mouse.)
Any help would be appreciated.
marshall

Knight,
Thanks for your interest in helping.
I am trying not to create a situation w/bugs and such. I think I can devise a work around but I would like a more "correct" solution. ;-)
To explain what I am doing I have a form that a person can use to enter a complaint. The person can give their last - middle - first name but they can also decide to be anonymous. If anonymous they click checkbox. Onclick of checkbox I fire javascript to disable name fields and place "Anonymous" in the last_name disabled field. The user can enter other data and when the user clicks ENTER I want to insert into the DB but the validation error trap of APEX sees a disabled field as a null. I want to place "Anonymous" in the last name field and then save the record with other data besides name.
To add to it - I can create two buttons 1-button enables and 2-button inserts and the same code works if I touch( give focus) to a field in between enabling and inserting into the DB
Does that help explain better.
Thanks again - hope you or someone can help - best regards.

DB13 Backup throws a error

Similar Messages

Maybe you are looking for