DB13 error: 0003 Error during initialization
Dear All,
Since last 2 days, Production backup is getting failed with error "0003 Error during initialization".
Strangely, there are no related logs to investigate further... Nothing was changed in backup related configurations.
We are using Tivoli (TSM) backup solution..
System Details: HP-UX 11.31i, Oracle10g (10.2.0.4), ECC 6.0
In DB13 Action logs, it is showing following details only...
Action: Whole database offline backup
Brbackup logfile : bedjjsnb.log ##### Actually it should show filename something like "bedjjsnb.aff"
Return Code : 0003 Error during initialization
When I click on "Show Actiion/Detail log", it shows nothing... (Log file does not exists..)
There is no file with above filename in /oracle/<SID>/sapbackup and in back<SID>.log
I have checked below things :
1. BRTOOL permissions (As per note 113747 - Permissions for DBA tools BRTools and SAPDBA)
2. /oracle/<SID>/sapbackup permissions (it is 755 with ora<sid>:dba ownership)
3. I have checked /var/adm/syslog/syslog.log, but there is no error.
4. Test for communication between SAP server and Tivoli is OK.
5. TSM Session query is also returning desired result.
6. I made sure that there are free and scratched tape in TSM for SAP backup pool.
7. No other backup was running at the time of SAP backup.
I have tried taking backup on DISK which is successful without any errors or warnings.
What else I can check ? Am I missing something ?
Any inputs will be highly appreciated...
I will try to fire backup manually later in the evening after business hours to see what exactly going wrong in between.
Regards.
Rajesh Narkhede
Hi John,
See the last few lines from output below: (SID and Hostname removed...)
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/<SID>/origlogA/log_g11m1.dbf
/oracle/<SID>/origlogB/log_g12m1.dbf
/oracle/<SID>/origlogA/log_g13m1.dbf
/oracle/<SID>/origlogB/log_g14m1.dbf
/oracle/<SID>/origlogA/cntrl/cntrlHRP.dbf
BR0061I 53 files found for backup, total size 133738.270 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0124I Query option set - no processing
BR0056I End of database backup: bedjndvn.qub 2010-06-04 17.01.32
BR0280I BRBACKUP time stamp: 2010-06-04 17.01.32
BR0052I BRBACKUP completed successfully
<HOSTNAME>:ora<sid>>
Nothing seems to be wrong...
Regards.
Rajesh Narkhede
Similar Messages
-
Unit conversion Error during initialize planning area
Hi,
When the dependent requirements planning area initialized for version 700 after filling BOM for Finished products for a Plant, system throws error message u201CUnit conversion not possible for product XXXXX (KG=>KM) u201D. The planning area UOM is KM and the finished product uom is also KM. The components uom is KG and EA. Why this error is thrown.
We can't maintain a alternate UOM measure for the component for EA and KM conversion.
Can someone explain how to overcome this error.
thanks and regards
MurugesanPlease check the specific product on your system if they have same base UoM both ECC and APO. Also do you have user-exit for unit of measures implemented on your system?
Thanks! -
I get this error 4 times when I open reader and can;t repair or uninstall it 11.0.06 (Mircrosoft windows search filter host needs to be closed).
Windows 7I haven't installed any third-party plugins. However, looking at the list of plugins, I see that there are two copies of ECMAScript: EScript.api dated 12/18/12, and EScript_AVG_RESTORED.api dated 1/21/13. So my bet is this is a side-effect of my anti-virus blocking the JavaScript security hole that was fixed by Java 7 Update 11. I deleted escript*.* from C:\Program Files (x86)\Adobe and the errors have gone away.
-
DB13, Error while backup
Hello
I am trying to schedule Whole offline backup through DB13 in Solution Manager 4.
The backup kicks off at the schedule time but ends with error with in seconds.
When i go and check the background job in SM37, the Job DBA:ALLOFFLINE______@174008/4000 is with Finished successfully status
I check the JOB log in DB13,
21:00:00 Job started
21:00:00 Step 001 started (program RSDBAJOB, variant &0000000000000, user ID XYZ)
21:00:00 Execute logical command BRBACKUP On host DQESAP03
21:00:00 Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
21:00:01 Job finished
I go to Action log in DB13
Status is in Error
Return code is 003 Error during initialization.
when i go to detail action log:-
BRBACKUP Action Log for Database <DBSID>
From: 01.04.2009 20:40:09
LogFile: beagpiht.afd
Return Code: 0003 Error during initialization
No action log for this action found in the database
Check the detail log
There are no logs created at OS level /oracle/SID/sapbackup
I then started the backup usning BRTOOLS at os level and Backup is successful.
Please suggest what could be the problem.
Thanks>
Subhajit Sengupta wrote:
> I think you need to manitain the BRBACKUP command in table SDBAC to be able to run a backup from DB13.
OK, putting my 5cents
1) I do not think the recommendation is good.
Table SDBAC should only be "touched" if indicated by an SAP note.
2) at the same time, I think it may be part of the problem.
The OP states:
> I am trying to schedule Whole offline backup
also
> background job in SM37, the Job DBA:ALLOFFLINE___
and finaly, the command executed is:
> Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
That is an OFFLINE backup plus a verification.
AFAIK, that is not a standard SAP JOB.
I assume that someone has changed the entry in SDBAC introducing this "new" action.
DB13 does not have coded such action, therefore it is not able to find it on the "control" tables and also it is not able to find the log.
Advise
1) check if someone changed that entry
2) check if there any "beagpiht*" log file in your system
3) do not play with SDBAC
Another option would be that you are in a MCOD database. Is that the case? -
IO ERROR at initialization of LC
Hi All,
I am getting following error during initialization of liveCache. Please help me resolving this ASAP.
/sapdb/db/programs/bin/dbmcli -U lc_admin -c -d HLC load_lcapps HLCUSER,HLC123
ERR
-24964,ERR_EXECUTE: error in program execution
768,/sapdb/MST/db/bin/sdbsysload -R /sapdb/MST/db -d HLC -u HLCADM,*
Installing APPS
Dropping Procedures
HLCUSER
ERROR: IOError: Cannot open file /sapdb/MST/db/sap/lcapps.pkg at APPS.pm line 146.
HLC is SID and HLCUSER is the SQL USER.Hi All,
I am getting following error during initialization of liveCache. Please help me resolving this ASAP.
/sapdb/db/programs/bin/dbmcli -U lc_admin -c -d HLC load_lcapps HLCUSER,HLC123
ERR
-24964,ERR_EXECUTE: error in program execution
768,/sapdb/MST/db/bin/sdbsysload -R /sapdb/MST/db -d HLC -u HLCADM,*
Installing APPS
Dropping Procedures
HLCUSER
ERROR: IOError: Cannot open file /sapdb/MST/db/sap/lcapps.pkg at APPS.pm line 146.
HLC is SID and HLCUSER is the SQL USER. -
DB13 ended with error during initilization tape
Dear Friend,
We upgraded solution manager server 6 month back to Solman 4.0 and oracle 10g. But during initialization of tape by DB13 i facing error as "Credential retrieval failed" same error occuerd if i execute online backup with DB13. But by brtools initialization tape work nice but not DB13. Also in SM37 initilization job finished not anyy error
Please find below message ,
BR0280I BRBACKUP time stamp: 2007-12-22 12.36.10
BR0301E SQL error -12638 at location BrInitOraCreate-2, SQL statement:
'CONNECT / AT PROF_CONN IN SYSOPER MODE'
ORA-12638: Credential retrieval failed
BR0303E Determination of Oracle version failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2007-12-22 12.36.10
BR0054I BRBACKUP terminated with errors
Please reply me.
Thanks in advance.
Rd,
SachinHi Sachin ,
Though sometimes ORA-12638 can be resolved by restarting the database services in cases where Oracle on Windows is being used, although for this user it was not helpful.
However, the following direction was given, and once administered, was a successful resolution to ORA-12638:
Please check the sqlnet.ora file. Change the following entry and try, this will work.
Original Entry - SQLNET.AUTHENTICATION_SERVICES= (NTS)
Modified Entry - SQLNET.AUTHENTICATION_SERVICES= (NONE)
Hope this might help you mate .
Regards,
Gokul B -
Error occurred during initialization of VM
im new to jdeveloper please anyone help me...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\reir\AppData\Local\Temp\trustStore9189074039610736238.jks -javaagent:../modules/org.eclipse.persistence_1.1.0.0_2-1.jar -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Error opening zip file or JAR manifest missing : ../modules/org.eclipse.persistence_1.1.0.0_2-1.jar
agent library failed to init: instrument
Process exited.This issue is usally caused by missing rt.jar. It's a good idea to manually unpack libraries.
Look for your java library directory (usually jre<version>/lib) .
If you can see rt.pack and can't see rt.ajr -
make the follwoing (I consider you save this to a script file then run it and your JAVA_HOME is correctly set and you're using some sort of UNIX):
---------------------------------cut---------------------------------
#!/bin/sh
JH=${JAVA_HOME:-"/usr/java/jre1.5.0_04"}
UNPACK_EXE=$JH/bin/unpack200
if [ -f $UNPACK_EXE ]; then
chmod +x $UNPACK_EXE
PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
for i in $PACKED_JARS; do
srcFile=${JH}/`dirname $i`/`basename $i .jar`.pack
dstFile=${JH}/$i
if [ ! -f $srcFile ]; then
printf "Error: Unable to find %s. Please, check out your installation.\n" $srcFile
exit 1
fi
$UNPACK_EXE $srcFile $dstFile
if [ ! -f $dstFile ]; then
printf "Error: unpack could not create %s. Please refer to the Troubleshooting\n" $dstFile
printf "Section of the Installation Instructions on the download page.\n"
exit 1
fi
rm -f $srcFile
done
else
printf "Error: unpack command could not be found. Please refer to the \n"
printf "TroubleShooting Section of the Installation Instructions on \n"
printf "the download page.\n"
printf "Please do not attempt to install this archive file.\n"
exit 2
fi
---------------------------------cut--------------------------------- -
Error occurred during initialization of VM. Could not reserve enough space
Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
FaisalDears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal -
6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help
I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons. -
Hi,
I´m trying to install Oracle 9i on a PC with Suse 9.2.
when I put the first CD it comes with this error:
Initializing Java Virtual Machine from /tmp/OraInstall2006-05-04_11-13-11PM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native library: /tmp/OraInstall2006-05-04_11-13-11PM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
I´ve seen that there was a similar issue in 2004 and I´ve trying to do what it says but it didn´t work this time.
Unable to load native library:
Could everyone help me to install Oracle??? I´ve been trying it for a few days and doesn´t work.
Regards,I had same problems long time ago. Ok, I try to remember.
First I read the recommandation. You need a special GLIBC-Library to support the JAVA 1.1.8 runtime environment.
Some of the Oracle9i tools are compiled with gcc 2.95 compiler.
You may need gcc_old for SLES9 for linking of those tools.
gcc_old-2.95.3-175.2.i586.rpm is included in SLES 9 SP2 CD1
For Suse you can obtain a package called orarun. You will get further support for installing, starting and stopping ORACLE. Please look at http://ftp.novell.com/partners/oracle/docs/9205_sles9_install.pdf.
Good luck. -
Error occurred during initialization of VM Using Whs
RDBMS Version: 9i
Operating System and Version: Microsoft Windows 2000 server Service pack 4
Product: Oracle Lite, 9i
AS: 9.0.2.3
When I use the wsh.exe in cmd.exe I have the error:
D:\oracle\prodotti\Ora9iasfe\Mobile\Server\bin>wsh
Error occurred during initialization of VM
Could not reserve enough space for object heap
Environment info:
D:\Documents and Settings\Administrator>java -version
java version "1.3.1_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_03-b03)
Java HotSpot(TM) Client VM (build 1.3.1_03-b03, mixed mode)
D:\Documents and Settings\Administrator>set classpath
CLASSPATH=D:\MOBILECLIENT\Mobile\bin\olite40.JAR;D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\pr
odotti\Ora9iasfe\MOBILE\CLASSES\OLITE40.JAR;d:\oracle\prodotti\Ora9iasfe\j2ee\home\oc4j.jar;d:\oracl
e\prodotti\Ora9iasfe\j2ee\home\lib\ojsp.jar;d:\oracle\prodotti\Ora9iasfe\jlib\zrclient.jar;d:\oracle
\prodotti\Ora9iasfe\reports\jlib\rwrun.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean.jar;d:\orac
le\prodotti\Ora9iasfe\jlib\LW_PfjBean.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean-nls.zip;d:\o
racle\prodotti\Ora9iasfe\Mobile\Server\bin\webtogo.jar;
D:\Documents and Settings\Administrator>set path
Path=D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\prodotti\Ora9
iasfe\Mobile\Server\bin;d:\oracle\prodotti\Ora9iasbe\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\
prodotti\Ora9iasfe\jdk\jre\bin\classic;d:\oracle\prodotti\Ora9iasfe\jdk\jre\bin;d:\oracle\prodotti\O
ra9iasfe\jlib;d:\oracle\prodotti\Ora9iasbe\jlib;D:\Programmi\Oracle\jre\1.3.1\bin;D:\Programmi\Oracl
e\jre\1.1.8\bin;D:\WINNT\system32;D:\WINNT;D:\WINNT\System32\Wbem;d:\oracle\prodotti\Ora9iasfe\bin\;
D:\PROGRA~1\ULTRAE~1;d:\oracle\prodotti\Ora9iasfe\MOBILE\sdk\bin
Thanks
RinoRDBMS Version: 9i
Operating System and Version: Microsoft Windows 2000 server Service pack 4
Product: Oracle Lite, 9i
AS: 9.0.2.3
When I use the wsh.exe in cmd.exe I have the error:
D:\oracle\prodotti\Ora9iasfe\Mobile\Server\bin>wsh
Error occurred during initialization of VM
Could not reserve enough space for object heap
Environment info:
D:\Documents and Settings\Administrator>java -version
java version "1.3.1_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_03-b03)
Java HotSpot(TM) Client VM (build 1.3.1_03-b03, mixed mode)
D:\Documents and Settings\Administrator>set classpath
CLASSPATH=D:\MOBILECLIENT\Mobile\bin\olite40.JAR;D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\pr
odotti\Ora9iasfe\MOBILE\CLASSES\OLITE40.JAR;d:\oracle\prodotti\Ora9iasfe\j2ee\home\oc4j.jar;d:\oracl
e\prodotti\Ora9iasfe\j2ee\home\lib\ojsp.jar;d:\oracle\prodotti\Ora9iasfe\jlib\zrclient.jar;d:\oracle
\prodotti\Ora9iasfe\reports\jlib\rwrun.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean.jar;d:\orac
le\prodotti\Ora9iasfe\jlib\LW_PfjBean.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean-nls.zip;d:\o
racle\prodotti\Ora9iasfe\Mobile\Server\bin\webtogo.jar;
D:\Documents and Settings\Administrator>set path
Path=D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\prodotti\Ora9
iasfe\Mobile\Server\bin;d:\oracle\prodotti\Ora9iasbe\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\
prodotti\Ora9iasfe\jdk\jre\bin\classic;d:\oracle\prodotti\Ora9iasfe\jdk\jre\bin;d:\oracle\prodotti\O
ra9iasfe\jlib;d:\oracle\prodotti\Ora9iasbe\jlib;D:\Programmi\Oracle\jre\1.3.1\bin;D:\Programmi\Oracl
e\jre\1.1.8\bin;D:\WINNT\system32;D:\WINNT;D:\WINNT\System32\Wbem;d:\oracle\prodotti\Ora9iasfe\bin\;
D:\PROGRA~1\ULTRAE~1;d:\oracle\prodotti\Ora9iasfe\MOBILE\sdk\bin
Thanks
Rino -
Error occurred during initialization of VM & java/lang/NoClassDefFoundError
ascertain:tcglive:~/BUILD/bin> ./listJobs
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
ascertain:tcglive:~/BUILD/bin> ./startJobServer -fg
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
We've been trying to get rmiregistry started but have noticed the following discrepancy on the server.
ascertain:tcglive:~> which java
/usr/bin/java
ascertain:tcglive:~> echo $JAVA_HOME
/usr/local/j2sdk1.4.2_03
There are conflicting versions of java on this box and even though 1.4.2 has been specified in $JAVA_HOME, the environment does not seem to recognise this:
ascertain:tcglive:~> java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_10, native threads, sunwjit)What does
which javasay? -
Error occurred during initialization of VM .. any sugesstion
Hi,
I tried to call the helloworld program from a C program in linux.
but i got the following error message
Error occurred during initialization of VM
Unable to load native library: libverify.so: cannot open shared object file: No such file or directory
Can any one give me suggestion of what could be wrong.
The same program, I was able to execute in windows and in solaris platform.
kabileshMost likely the lib is not in your shared library path.
Or the permissions are wrong (file or directories.) -
Error occurred during initialization of VM Could not reserve enoughspace for code cache
I receive this error in the ZENWSimport and Removal screen:
Error occurred during initialization of VM
Could not reserve enough space for code cache
Server is a HP DL380G4, NWSBS SP5, 4 GB RAM.
I think it's Java related, because iManager also stopped working (error
503 - service unavailable)
AUTOEXEC.BAT:
@echo off
prompt $p$g
path=c:\dos
rem mscdex /d:cpqcdrom /v /m:50 /l:f
c:\dos\nlsfunc
c:\dos\mode con cp PREPARE=((437) c:\dos\EGA.cpi)
c:\dos\mode con cp Select=437
cd \NWSERVER
## commented by MemCalc server -nl -u134217728
server -nl -u134217728
I tried removing the -u switch, but the server wouldn't even boot then.
I'm out of options, can anyone help?
Arjan SchepersAlso, I reapplied Service Pack 5, didn't help. BTI.CFG looks like the
following:
;* Copyright 1982-2001 Pervasive Software Inc. All Rights Reserved
;* Pervasive Software product initialization file for NetWare
[Btrieve Communications Manager]
MaxWorkerThreads=16
MaxReceivePacketSize=1500
Supported Protocols=TCPIP
Listen IP Address=
TCP/IP Multihomed=YES
Enable AutoReconnect=NO
AutoReconnect Timeout=180
[MicroKernel]
CacheSize=2048000
Pervasive SQL 9SP2 is installed on this server for an application named
MICROS RAS/KAS. It needs 2GB memory (*shrug*, I know), hence the 4GB memory.
Arjan Schepers -
Error occurred during initialization of VM, could not reserve space in heap
I installed the SOA suite+ BPM 11.1.1.3.0, ESB 11.1.1.3.0 successfully along with RCU schema in oracle DB Ex edition 11 G successfully. I have 2 GB Ram in my system. I am facing the below error during the startup of weblogic instance which is having these all ESB, BPM properties.
it seems that 2 GB ram is occupying by the SOA suite.
CAN ANY ONE SUGGEST TO REDUCE THE SOA SUITE RAM CAPACITY.
USER_MEM_ARGS=-Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
JAVA_OPTIONS= -Xverify:none
** End SOA Specific environment setup for win.
** SOA specific environment is already set. Skipping ...
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\user-patch.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\soa-startup.jar;;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_
Error occurred during initialization of VM
Could not reserve enough space for object heap
Regards
Raghu VeerHello Raghu,
As James indicated it is problem with the system configuration but still you may try below once -
Go to $Domain_Home/bin and edit the setSOADomainEnv.cmd (or setSOADomainEnv.sh) to change below setting -
set DEFAULT_MEM_ARGS=-Xms512m -Xmx512m
If you are using AMD processor then modify below instead of DEFAULT_MEM_ARGS -
set PORT_MEM_ARGS=-Xms768m -Xmx768m
Save and exit.
Now start Admin server and after that SOA server and OSB server. As James suggested, for better performance you may keep either of SOA and OSB server up as and when required and keep other one down.
I am still using a 2GB machine for 11g suite and I work easily because generally I work with one of SOA or OSB server and whenever I use any IDE like JDev or OEPE, I keep all servers down. For better performance and memory utilization you may use Oracle XE database.
Hope it helps.
Regards,
Anuj
Maybe you are looking for
-
Need help with haivng more than one Ipod.....
Ok, I have gone through these posts and am still having trouble. I already had my daughters shuffle on our computer from last year. My husband and I both got Ipods for Christmas this year. I registered mine under a different email and created a new a
-
I've just bought Final Cut Express 4 so am very new to this program. I have imported (old) footage originally from an AVCHD camera but now in .mov format. In the browser window the frame size shows as 1920x1080. However the sequence frame size shows
-
BAPI_SHIPMENT_CREATE - Shipment without outbound deliveries
Hello experts, I am implementing bapi BAPI_SHIPMENT_CREATE for generating shipment number (VT01N). The user inputs are (1) outbound delivery number (2) shipment type and (3) forwarding agent. BAPI is generating shipment number in simulation and when
-
What is the average lifespan of the mac book
what is the average lifespan of the mac book
-
Mobile application to connect Tweeter and Facebook.
Hi, I want to develop a mobile app which will help user to post message on Tweeter and Facebook, I have searched a lot and found that I need to user OAUTH for Tweeter. Has anyone implemented Tweeter and Facebook API in mobile applications? Please gui