DB13 job failed due to SXPG_COMMAND_EXECUTE error
Hi,
I received an error when I try run the BRCONNECT Database Action Calendar (tx. DB13), either it's a Database check, statistics updates, etc. The error messages are as follows:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000166, user ID SETIR0)
No application server found on database host - rsh/Gateway will be used
Execute logical command BRCONNECT On host tdcwsxd1
Parameters: -u / -c -f check
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
FYI, we're using DB instance (DB) and Central Instance (CI) on each separate box in the unix environments. SAP Basis rel. 620 with SP level SAPKB62053.
If I execute the command directly in DB instance, it works fine but not from SAP trx DB13.
Command: brconnect -u / -c -f check.
Thanks and best regards,
Mark
Hi Mark,
Sorry I see you are running on Unix, I am only familiar with Windows environment, but however on Windows I would do the following:
1) Install a so called Standalone Gateway on the DB-host.
2) copy the sapxpg executable to the directory where the gateway is installed.
2) Change the SAPXPG_DBDEST... RFC connection to point to, or use this gateway (gateway options).
That's all....
(How to Install a standalone gateway or Gateway instance is normally described in the SAP installation guide).
But as I sad, I am not sure if this is possible under Unix also, and the way to go...
Regards
Rolf
Similar Messages
-
Whole online backup from DB13 failed due to processing error
Hello!
I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target. The backup goes very slow and breaks after a while.
The BRBACKUP action log looks as follows:
backup_mode ALL
backup_type online
backup_dev_type stage
stage_root_dir /sap/DEVB
compress no
stage_copy_cmd ftp
remote_host 192.168.200.3
remote_user sapbackup
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
BR0204I Percentage done: 12.89%, estimated end time: 23:06
BR0001I ******____________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
BR0204I Percentage done: 15.04%, estimated end time: 21:36
BR0001I ********__________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
<b>BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
Connected to 192.168.200.3 Port 21.
220-FTP server ready.
220 This is a private system - No anonymous login
331 User sapbackup OK. Password required
230-User sapbackup has group access to: administrator
230-This server supports FXP transfers
230-OK. Current restricted directory is /
230-************************************************
230-* Use SITE command to change client codepage: *
230-* ie, site codepage [client codepage] *
230 ************************************************
200 TYPE is now 8-bit binary
200 PORT command successful
150 Connecting to port 4977
NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors </b>
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0054I BRBACUP terminated with errors
Any helpful information will be appreciated.
regards!
Thomthis post is duplicated at Re: Backup to remote stage failed due to RFC error
please only post your question once and only in 1 forum.
thanks. -
Backup to remote stage failed due to RFC error
Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code <b>DBIF_RSQL_SQL_ERROR</b>.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
ThomHello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
<b>Database:</b>
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
<b>Background:</b>
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
<b>Syslog</b> : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom -
The Job Failed Due to MAX-Time at ODS Activation Step
Hi
I'm getting these errors "The Job Failed Due to MAX-Time at ODS Activation Step" and
"Max-time Failure"
How to resolve this failure?Hi ,
You can check the ODs activation logs in ODs batch montior >> click on taht job >>> job log
for this first you check in sm37 how many jobs are running if there are many otehr long running jobs then . the ODs activation will happen very slowly as the system is overloaded .. due to the long running jobs ..this causes the poor performance of system ..
for checking the performance of system .. you first check the lock waits in ST04..and check wether they are progressing or nt ..
check sm66 .. for the no of process running on system ..
check st22 >> for short dumps ..
check Os07> to check the cpu idle tiem if its less tehn 20% . then it means the cpu is overlaoded .
check sm21 ...
check the table space avilable in st04..
see if the system is overlaoded then the ODS wont get enough work process to create the backgorund jobs for that like(Bi_BCTL*)..jobs .the updation will happen but very slowly ..
in this case you can kill few long running jobs which are not important .. and kill few ODs activations also ..
Dont run 23 ODs activation all at a time .. run some of them at a time ..
And as for checking the key points for data loading is check st22,cehck job in R/3 , check sm58 for trfc,check sm59 for Rfc connections
Regards,
Shikha -
Error: NDMP operation failed due to media error
I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
sbtclose2: Internal error - NDMP Data Service has exited prematurely.
For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
10:16:42 SPU: sending progress update
10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
10:17:43 SPU: sending progress update
10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
10:19:35 MNPO: mover halted with reason=media error
10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
10:19:35 MNPO: data service halted with reason=connection error
10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
10:19:53 A_T: suppressing filemark output due to NDMP having written one
10:19:53 A_T: writing marker label; here it is:Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio -
Epson printer and driver, all jobs "stopped due to filter errors"
My printer broke, so I'm trying to use my roommate's Epson WorkForce 520 with my Arch64 system. I grabbed the 64-bit driver rpm from Epson, extracted and copied everything to /opt (no readme for a manual installation, but the paths in the PPD point to having the files installed there). The driver came with some libraries, so I added their path to ld.so.conf and ran ldconfig. Successfully added the printer in CUPS, but trying to print anything gives me "/opt/..../epson_inkjet_printer_filter failed". I checked the permissions on the filter, they're 755 and it's executable. The CUPS error log shows "Job stopped due to filter errors; please consult the error_log file for details" followed by debug spew which doesn't clarify the issue for me, attached below.
I searched on the problem, found some people blaming it on issues with the update to CUPS 1.4 which have since been addressed, and others who were told to switch to using opensource drivers. Unfortunately that doesn't seem to be an option for me; Gutenprint and foomatic have drivers for the 500 but they don't support the 520; the only driver I can find that does is the one from Epson.
Anyway, I'm really hoping this is an issue with my CUPS/printer config, or that I missed some critical step in manually installing the printer drivers, and not that Epson's driver is just broken. If anyone has any ideas I'd be much obliged, let me know if you need more information.
Here's the complete error log from when I try to print. Sorry if it's obnoxiously long, I'm not sure which parts are relevant:
E [06/Oct/2010:11:45:04 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:45:04 -0400] [Job 17] The following messages were recorded from 11:45:04 to 11:45:04
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:45:04 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:45:04 -0400] [Job 17] 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] true
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:45:04 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_space_params(0x1348128, 0x7fff0ad37d10)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37ad0)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37a90)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Installing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38050)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38000)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38090)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38080)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37f40)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38030)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_print_pages(0x1348128, 0x7fd9faf08780, 1)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:45:04 -0400] [Job 17] End of messages
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-reasons=none
E [06/Oct/2010:11:48:16 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:48:16 -0400] [Job 17] The following messages were recorded from 11:48:16 to 11:48:16
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:48:16 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:48:16 -0400] [Job 17] 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] true
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:48:16 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_space_params(0x2623128, 0x7fff41eea420)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1e0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Installing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea760)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea710)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea7a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea790)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea650)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea740)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_print_pages(0x2623128, 0x7f485d7e3780, 1)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:48:16 -0400] [Job 17] End of messages
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-reasons=none
Thanks in advance@kusmar
You could recompile the filter with --enable-debug. It will create the file "/tmp/epson-inkjet-printer-filter.txt" if you call the filter...
I installed the driver from epson-inkjet-printer-workforce-635-nx625-series-1.0.0-1lsb3.2.src.rpm and compiled the filter by myself. But I get an error if the filter will load the closed source core library of epson.
$ sudo cat /tmp/epson-inkjet-printer-filter.txt
[printJob:483] TRACE IN
[load_core_library:164] TRACE IN
[get_ppd_attr:139] PPD Attribute epcgCoreLibrary -> libEpson_WorkForce_635_60_NX625.so.1.0.0
[load_core_library:181] Failed to dlopen(libEpson_WorkForce_635_60_NX625.so.1.0.0)->/usr/lib/libEpson_WorkForce_635_60_NX625.so.1.0.0: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[load_core_library:242] TRACE OUT=1
[printJob:526] TRACE OUT=1
[eps_heap_usage_end:42] =============================================================
[eps_heap_usage_end:43] HEAP USAGE : max(0 bytes) leak(0 bytes)
[eps_heap_usage_end:44] =============================================================
_ZTVN10__cxxabiv117__class_type_infoE looks like libstdc++ - but I already have that library in /usr/lib
Does someone knows what library does he miss?
Edited:
It was no missing library. It is a really strange problem here. If I build it with my PKGBUILD it will give the error above.
If you go into the $srcdir, compile and overwrite it manually it will work properly.
cd "$srcdir/$_pkgname_filter-$pkgver"
make clean
./configure --prefix=/opt/epson-inkjet-printer-workforce-635-nx625-series
make
cp src/epson_inkjet_printer_filter /opt/epson-inkjet-printer-workforce-635-nx625-series/cups/lib/filter/epson_inkjet_printer_filter
pkgname=epson-inkjet-printer-workforce-635-nx625-series
_pkgname_filter=epson-inkjet-printer-filter
pkgver=1.0.0
pkgrel=1
pkgdesc="Linux printer driver for Epson AIO"
arch=('i686' 'x86_64')
url="http://avasys.jp/eng/linux_driver/download/lsb/epson-inkjet/escp/"
license=('GPL, LGPL, custom:AVASYS Public Licence')
depends=('cups')
makedepends=('rpmextract' 'libtool')
source=(http://linux.avasys.jp/drivers/lsb/epson-inkjet/stable/RPMS/x86_64/$pkgname-$pkgver-1lsb3.2.src.rpm)
md5sums=('e2240acfbad8f965b167f312aeefbfe7')
build() {
cd "$startdir/src"
rpmextract.sh $pkgname-$pkgver-1lsb3.2.src.rpm || return 1
tar xzf $pkgname-$pkgver.tar.gz || return 1
tar xzf $_pkgname_filter-$pkgver.tar.gz || return 1
cd $_pkgname_filter-$pkgver
aclocal
libtoolize
chmod +x configure
./configure --prefix=/opt/$pkgname --enable-debug || return 1
make || return 1
package() {
cd "$srcdir/$pkgname-$pkgver"
install -d "$pkgdir/opt/$pkgname/"
cp -r lib "$pkgdir/opt/$pkgname/"
cp -r resource "$pkgdir/opt/$pkgname/"
cp -r watermark "$pkgdir/opt/$pkgname/"
install -d "$pkgdir/usr/share/cups/model/$pkgname"
install -m 644 ppds/* "$pkgdir/usr/share/cups/model/$pkgname"
cd "$srcdir/$_pkgname_filter-$pkgver"
install -d "$pkgdir/opt/$pkgname/cups/lib/filter/"
install -m 755 src/epson_inkjet_printer_filter "$pkgdir/opt/$pkgname/cups/lib/filter/epson_inkjet_printer_filter"
Edited 2:
Ok, I found the problem. Arch's makepkg will add an "--as-needed" to LDFLAGS and the binary won't be linked to libstdc++.so.6 and libgcc_s.so because the binary does not need it but the core library of epson. I overwrite that with "--as-no-needed" and now it works. Added the package: http://aur.archlinux.org/packages.php?ID=42294
Last edited by Misery (2010-10-29 10:51:02) -
OMF export failed due to internal error
I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge -
Error in Tomcat --- context start up failed due to previous errors
Feb 27, 2008 11:05:11 AM org.apache.catalina.core.StandardContext start
SEVERE: Context [/jstl] startup failed due to previous errors
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.TabLabel)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.Tree)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(com.mycompany.jsf.validat
or.LATER_THAN)
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext startHello frnds i dont understand what should i do? anybody familiar with this kind of error. please let me know in this case what should i do?
even if i am trying to copy whole files in another folder it shows same msg for that folder too. please help me
Thankyou everybodyHi ,
I also face this same kind of problem.
I tried to fix the problem but not work out.
I got another solution. I am not sure its a current solution .
Try it carefully.
Finally 1, I take back up -copy of server.xml and common/lib .
2, Un-install Tomcat server.
3, After i have installed fresh tomcat server.
4, Replace back-up copy of server.xml and common/lib.
its working fine -
'OMF export failed due to internal error' message
Hi,
Has anyone ever got an 'OMF export failed due to internal error' message when trying to export in OMF format?
I get that every time I try to export in that format.
How can I make it work?
Thanks and best,Hello sj holcombe,
And welcome to Apple Discussions!
Have you had a chance to check out this Apple support document directly related to this issue? If not, it is a good place to start.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
Hope it helps.
B-rock -
When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?
I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP -
Why is file syncing failing due to server error(s)?
I am working on an HTML file inside Edge Code. When I save, it fails due to 'server error' (no other details). I then get multiple 'conflicted copies' of the same file in my cloud directory. I clean this off and try to resave. It saves, then undoes the last few changes! It reverts back to a previous version of the file.
I guess I'll start working with the 'newest' conflicted copy or something. It's ridiculous. There are no internet issues on my end here, either, which is what I thought at first.
Extremely frustrating! I suppose I'm going to work locally, and then just try to sync. the file after I am done (and after I have made a duplicate in case Cloud tries to overwrite and save an older version of the file).
This pretty much makes cloud-based work fairly useless!File Sync Links that may help... all the links I have, since I don't know the cause of your specific problem
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/help/sync-settings.html
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-Size Limits https://forums.adobe.com/thread/1488242
-sync and email link http://forums.adobe.com/thread/1427516?tstart=0
-Phantom folder problem https://forums.adobe.com/thread/1490445
-an overview of assets https://assets.adobe.com/files -
'Write' failed due to: Translation Error.
Hi
I'm trying to convert csv and write to a file using FielAdapters in 11g. While reading input i created .xsd using native builder. and using same for write fileadapter. my flow is ReadFileAdapter-->Receive-->invoke-->writeFileAdapter.
Is this right? when I deploy and run I'm getting
<01-Mar-2013 10:09:23 o'clock GMT> <Error> <oracle.soa.adapter> <BEA-000000> <JCABinding=> ReadInput ReadInputAdapter Service ReadInput was unable to perform delivery of inbound message to the composite default/ReadWriteFile!1.0*soa_40862c80-62ba-4425-b7e6-5fcfb5c5b4e4 due to: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.
Translation Error.
Error while translating message to native format.
Please make sure that the payload for the outbound interaction conforms to the schema.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Element not completed: 'TestRoot'</detail>
,code=<code>null</code>}
>
I want to convert csv and write as an xml to output file. can some body help me whats is wrong?
here is my xsd
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/ReadInput"
targetNamespace="http://TargetNamespace.com/ReadInput"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
>
<xsd:element name="TestRoot">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TestRecord" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
and csv file
12, John, ryegate, Essex
23, Will, wilow, orlean
I also tried inbuild advane function on invoke activity
ora:doTranslateFromNative(bpws:getVariableData('ReceiveInput_Read_InputVariable'),'xsd/Hello2_8.xsd','Test','DOM')
even this didn't work.
can somebody help me how to write as xml from csv?
Thanks
Edited by: user11132693 on Mar 1, 2013 3:01 AMwhne i use transformer it is xslt which takes only values isn't it? And it writes only valuesNope, xslt can write xml... Actually, I'm not sure if I understand what your question is at the moment... Are you still facing the "Translation Error"? Or do you have a problem with a transformation?
Check this... https://forums.oracle.com/forums/ann.jspa?annID=330 -
I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?
I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890 -
"JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.
Hi, i am trying to read a comma delimited file using an inbound file adapter, i have used a mediator to route records to the outbound file adapter.My input.txt file contains 10 records as Fname,Lname.I have used native format builder to generate xsd. To achieve transformation,in the mediator i have mapped only the Fname from source to traget using a for-each loop.I am trying to publish records in the batches of 2 so i have configured inbound file adapter accordingly.My inbound file adapter reads the first two records and the same is visible at the em console mediator instance(payload), i am even able to see the first two records being transformed in the transformed payload in the mediator instance detail but at the outbound file adapter i get an error saying :
Error during invoking 1-way operation "Write" on target service "writeFile"
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
When i map both the Fname and Lname in the xsl map file i get the output.But i only need one field at the outfile i:e either the Fname or the Lname.
Given below are the details of the interface:
My Interface Flow: InboundFileAdapter--------ReadsFile------->Medaitor------Transformation----->OutboundFileAdapter-----writesFile
Input Payload(comma delimited text file) as,
Brad,Pitt
Keanu,Reaves
Martin,Lawrance
Johnny,Depp
etc
etc
Schema definition for payload:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/readFile"
targetNamespace="http://TargetNamespace.com/readFile"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII">
<xsd:element name="Root-Element">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Employee" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Fname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Lname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
XSL Map:
<xsl:template match="/">
<imp1:Root-Element>
<xsl:for-each select="/imp1:Root-Element/imp1:Employee">
<imp1:Employee>
<imp1:Lname>
<xsl:value-of select="imp1:Lname"/>
</imp1:Lname>
</imp1:Employee>
</xsl:for-each>
</imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Please help me with the above mentioned error and if above transformation is possible using a mediator instead of BPEL
Regards,
SaifHi Saif, Are you using the same xsd for the outbound (write) file adapter as well? In that case, you may need to map both the names (Fname and Lname) but leave the name which you do not want to be written to the file as an empty text. For example, if you would need to map only the Lname, but not the Fname, the xsl will be like,
<xsl:template match="/">
<imp1:Root-Element>
<xsl:for-each select="/imp1:Root-Element/imp1:Employee">
<imp1:Employee>
<imp1:Fname>
<xsl:text disable-output-escaping="no"></xsl:text>
</imp1:Fname>
<imp1:Lname>
<xsl:value-of select="imp1:Lname"/>
</imp1:Lname>
</imp1:Employee>
</xsl:for-each>
</imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Another option is to have a separate xsd with only one element (Fname or Lname) for the outbound file adapter, in which case you would need to map only one field. -
I'm trying to encrypt a PDF with a password and receive this error.
~ERROR~com.adobe.document.PDFManipulation~: PDF command failed due to PDFlib error: Bad parameter.
It does not throw an exception, it just logs this error.
Anybody know how to fix this?
Version: 7.0.2
OS: WinI was also getting this error, when trying to set usage rights on a document and then encrypt it with a password. I found a solution which works (more like a workaround, as this feels like a bug):
1. Open the unprotected file
2. Call pdfDocument.encryptWithPassword()
3. Call pdfDocument.save(), write resulting bytes to temp file
4. Reopen this file with pdfFactory.openPdfWithPassword()
5. Now you can call pdfDocument.setUsageRights() and pdfDocument.save()
Maybe you are looking for
-
I am unable to connect to my home wifi, i was fine in a hotel this past week with the wifi
Question I am unable to connect to my home wifi, I was fine in a hotel this past week with their wifi, I am not that technical and need help also how do I find my operating system info??
-
IMac display connector on logic board
Does anyone know the part number or part description for the connector on the logic board that connects to the display (tdms) cable on an iMac G4? On the logic board, where the old one was, is the notation "j10". The person I got this iMac from tried
-
Is it possible to auto increment a streamname when publishing to FMS? Instead of appending to the same folder/directory of the liveevent and stream files when publishing and unpublishing, is there an option to which if a stream is unpublished and rep
-
On iTunes when I print a jewel case it is too large. Any suggestions?
In iTunes when I print a CD jewel case it is too large. Any suggestions?
-
Printing problems inDesign CS5 to an Epson 3880
When printing one color CD cover to an Epson 3880 from inDesign CS5, it fills and exceeds a 8.5" by 11" page. This same procedure has worked excellently for quite some time and now doesn't. I reset Preferences and this didn't work. Any thoughts?