DB14 Backup - No logs exist for the selection criteria for system DEV

Hello Expert,
          When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
so please suggest me where i need to maintain the selection criteria.
Thanks & Regards
Annasaheb

Hi Anna,
As told by Markus and Eric above...
you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
Why you are searching for money in an empty pot
Regards
Nick Loy

Similar Messages

  • TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

    Hello Experts.
    I'm facing a error when execute the STEP B06 in TPM_MIGRATION Transaction, the message was:
    No position exists for the selected criteria
    Message no. TRQ0020
    Diagnosis
    This is the position that is characterized by the following details:
    CC=1020;PT=V4I;SA=DEPBCCR;SE=1000013
    When I look the Security ID number in the old system, the Document is obsolete, but the migration transaction seek the FLOW information for this ID number and not return any information.
    Thanks for you help.
    Regards.
    Edited by: k3n_rao on Mar 31, 2011 7:32 PM

    Hi Lorenz,
    Thank you very much for the answer, My colleague, the one who posted the threat is not longer available, he went on hollydays.
    We did check TPM12 & TPM13  and the reports said:
    TPM12 : "no positions selected"
    TPM13: "No flows found"
    Just to double check that we have understood, which "Migration date"  are you reffering to?
    thank you very much
    best regards,

  • WIP Assy Completion -The onhand qty is zero for the selection criteria ente

    Hi,
    I am trying to do a Work Order-Less completions with Transaction Type as 'WIP Assy Completion', the assembly items are not serial and lot controlled.
    When i am trying to save it, it throws an error as 'The onhand qty is zero for the selection criteria entered'.
    Please suggest.
    Thanks

    Do you have onhand quantity for the components under that assembly?
    Thanks
    Nagamohan

  • Hide the selection criteria for EA21 transaction

    hi,
    Good day guys
    Hope every one is doing well. I need to hide the selction criteria for EA21 Transaction code. Plz let me know how to do it with out disturbing the standard code?
    Regards
    KK

    Hello,
    If they are not mandatory for the selection you can just hide them using Transaction Variant (SHD0). See Online sap help for transaction variant.
    Regards,
    Karthik D

  • Can we change the selection criteria for RV60SBAT Background Job for Billin

    We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
    Thanks,
       Matt

    Hi Matt
    For your requirement , copy the standard  RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
    Regards
    Srinath

  • User exit/BADI  required for coding for the selection custom fields in RSA3

    Hi,
       I have a requirement  in the Datasource extractor. I need to add custom Z fields  in the Data souce of the  2LIS_02_SCL and need to include in the selection part. So I have added the custom filed in the append structure and include the check in the selection checkbox in the transaction LBWE  under the datasource specified above. For the corresponding custom fields, to be populated in the ALV list, I have written the code in corresponding user exit  ZXRSAU01.
    Now I can view my custom Z fields in the list as well as on the selection fileds  while executing the transaction RSA3. But I need to write code for the selection criteria part.  On entering value in the selection criteria of my custom z field, no  values are selected to the corresponding query. Please let me know where should i write the coding part for the selection criteria of the Z fields for the Datasource.
    On debugging, to my understanding only  the standard fields are alone getting filtered by providnig the values in the selection part of the RSA3 tcode. It is called in Macros : Sel  < Datasorce> .... and  the fetch cursor is included inside the macros.
    Please let me know any user exits or Badi;s available for it.
    Thanks in advance

    Hi shivu,
    you might try the BAdI RSU5_SAPI_BADI. A good introduction can be found in the following document:
    [Enhancing DataSources with BAdI RSU5_SAPI_BADI|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7]
    The BAdI is called at the time of extraction, so this would be the right place to populate your additional fields.
    Best,
    Chris

  • Status profile for the selection screen ?

    Dear Shymal,
    The link of thread which you sent have this line status profile for the selection screen for QA33 and QA32 . I don't users ti get those lots which are having status LTCA.
    Now how can i do this? Can you explain me?
    Regards,
    Kaushal Rai

    Dear Kaushal,
    It is written in that reply status profile, is just a slip of mind/Fingers only. We can say a typographical error. I hearty apologies for the same.
    Now a accept my regret and pls find the rectification herewith.
    That is "Selection Profile", to create rather I can say configure it,
    - Run trx BS42, create new profile, Name it Logically.
    - Double click on the "_Selection Conditions_",system will lead you to the screen named Change View "Selection Conditions": Over View.
    - Here Enter the LTCA, in the Fourth Column "STATUS".
    - Click on the check box under Sixth column 'not'.
    The settings should be as.....
    1st Column,,,Link :- No Links (Blank0
    2nd Column,,,Usr:- Don't check this box.
    3rd Column,,,St.Prof.:- Blank
    4th Column,,,Status:- LTCA.
    5th Column,,,Status:- Lot canceled
    6th Column,,,not:- Check this box.
    7th Column,,,Status:- It will be 'Active' by default.
    Now SAVE.....
    Now in QA32, pick the section profile you just created.
    Let me know if it don't work.
    Regards,
    Shyamal

  • Enhance the selection criteria of COOIS

    Hi Experts,
    My role is Basis, I have a problem with tcode COOIS. Users normally execute the COOIS and not enter the sensible selection criteria. It make very high system performance during run and use more than 70% of SAP paging after finished. Normally SAP performance is good enough, I cant imagine if user execute COOIS more than 1 session. They're also not accept to execute in background due to their existing operation design but only thing I can thinking now is make more restriction for the selection criteria.
    Pls suggest me ur best practise that, How can I hide or lock the unneccessary selection criteria in COOIS? And set the default variant for everytime user run tcode COOIS or else that can enhance the COOIS. 
    Regards,
    Piyapong C.

    Hi
    Piyapong using variants we can solve this problem.In the initial screen enter the selection parameters as per your requirements after that save that variant.After that when you run the COOIS again,run with this variant.
    In this you can protect the field,hide the field and you can make the field as required field(mandatory entry).
    Regards,
    Raj.

  • No entries exist for the selection-FTR_EDIT

    Hi Experts,
    I created treasury deal in FTR_CREATE, after save the deal systems is prompting Message express document update terminated User Name so and so, after enter Deal is Created in Company Code. But when I check the deal no in FTR_EDIT system is prompting message "No entries exist for the selection", I checked in table VTBFHA also there also deal no is not showing, if try to create Deal again system is taking next available No for the deal. Please share some  ideas if you face same kind of issue.
    Thanks & Regards,
    AIM

    Hi Feng,
    Thanks for your reply.I tried that one also even though i am not able to reslove, please suggest any other solution.
    Thanks & Regards,
    AIM

  • Error - no elements exist for the selection - RSMIPROACT

    Hi Experts,
    We have an issue with the program RSMIPROACT to send requirement to SNC. We have an error "No elements exist for the selection" once execute the program with input parameters.
    Could you please help me out if anything missing or cause of the error.
    Regards
    Gowri Sankar

    Hi Gowri,
    if the MRP areas are inactive, note 1627486 could help, please verify...
    Regards,
    Mauro

  • Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID:

    Expert,
    I did the following steps to upgrade the OWB repository from 10g to 11g
    • Created a dummy workspace in the 11.2 repository
    • Created users in the destination environment
    • Run Repository Assistant against the 11.1 source database
    • Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
    After 99% of completing I have got the below error
    Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID: 65314
    Please let me know the solution.
    Thanks,
    Balaa...

    Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
    Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
    refer
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    This will give you info about your missing ACL
    Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
    please refer :
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
    Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
    Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
    Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
    It might resolve this ACL issue but it did not work for me.
    If none of these work then
    Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
    It worked for me.
    Varun

  • How to populate the ranges using FM for the SELECTs

    Hi,
    I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
    There is a RANGE statement in the sample FM and the following statements for SELECTs
      RANGES: L_R_CARRID  FOR SFLIGHT-CARRID,
              L_R_CONNID  FOR SFLIGHT-CONNID.
    and...
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
            APPEND L_R_CARRID.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
            APPEND L_R_CONNID.
          ENDLOOP.
    My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
    Would someone take the time to say something about this in  several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
    Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
    Appreciate any replies.

    Hi
    Here is an example of an extractor that uses
    both method's, if the InfoPackage selection exist's
    it overrides the TVARV selection (which is the default).
    FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SBIWA_S_INTERFACE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SBIWA_S_INTERFACE-ISOURCE OPTIONAL
    *"     VALUE(I_CHABASNM) TYPE  SBIWA_S_INTERFACE-CHABASNM OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SBIWA_S_INTERFACE-INITFLAG OPTIONAL
    *"     VALUE(I_UPDMODE) TYPE  SBIWA_S_INTERFACE-UPDMODE OPTIONAL
    *"     VALUE(I_DATAPAKID) TYPE  SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
    *"     VALUE(I_PRIVATE_MODE) OPTIONAL
    *"     VALUE(I_CALLMODE) TYPE  ROARCHD200-CALLMODE OPTIONAL
    *"  TABLES
    *"      I_T_SELECT TYPE  SBIWA_T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SBIWA_T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  ZBW_TC_FORECASTING_EXT_STR OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    *"      HIERARCHY_NOT_FOUND
    Change History                                                      *
    Mod. #  |  Date    |  Developer     |  Description                  *
    *RD3K915762|06/21/2005| SRangaraj      | Change selection of open SO   *
             |          |                | data to include deleted matls *
             |          |                | and obsolete items too        *
    RD3K915888|06/29/2005| SRANGARAJ      | Add ext matl grp and lab offce
             |          |                | filters for data-selection    *
    The input parameter I_DATAPAKID is not supported yet !
    Auxiliary Selection criteria structure
      DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
    Maximum number of lines for DB table
      STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
    Parameter I_PRIVATE_MODE:
    Some applications might want to use this function module for other
    purposes as well (e.g. data supply for OLTP reporting tools). If the
    processing logic has to be different in this case, use the optional
    parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
    between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
    (I_PRIVATE_MODE = X).
    If the message handling has to be different as well, define Your own
    messaging macro which interprets parameter I_PRIVATE_MODE. When
    called by BIW, it should use the LOG_WRITE macro, otherwise do what
    You want.
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    The input parameter I_DATAPAKID is not supported yet !
    Invalid second initialization call -> error exit
        IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
          IF 1 = 2. MESSAGE E008(R3). ENDIF.
          LOG_WRITE 'E'                    "message type
                    'R3'                   "message class
                    '008'                  "message number
                    ' '                    "message variable 1
                    ' '.                   "message variable 2
          RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDIF.
    Check InfoSource validity
        CASE I_DSOURCE.
          WHEN 'ZBW_TC_SO_EXTRACT'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE            "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
    Check for supported update mode
       CASE I_UPDMODE.
         WHEN 'F'.
         WHEN OTHERS.
           IF 1 = 2. MESSAGE E011(R3). ENDIF.
           LOG_WRITE 'E'                  "message type
                     'R3'                 "message class
                     '011'                "message number
                     I_UPDMODE            "message variable 1
                     ' '.                 "message variable 2
           RAISE ERROR_PASSED_TO_MESS_HANDLER.
       ENDCASE.
    Check for obligatory selection criteria
       READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
       IF SY-SUBRC <> 0.
         IF 1 = 2. MESSAGE E010(R3). ENDIF.
         LOG_WRITE 'E'                    "message type
                   'R3'                   "message class
                   '010'                  "message number
                   'PGMID'                "message variable 1
                   ' '.                   "message variable 2
         RAISE ERROR_PASSED_TO_MESS_HANDLER.
       ENDIF.
        APPEND LINES OF I_T_SELECT TO G_T_SELECT.
    Fill parameter buffer for data extraction calls
        G_S_INTERFACE-REQUNR    = I_REQUNR.
        G_S_INTERFACE-ISOURCE   = I_DSOURCE.
        G_S_INTERFACE-MAXSIZE   = I_MAXSIZE.
        G_S_INTERFACE-INITFLAG  = I_INITFLAG.
        G_S_INTERFACE-UPDMODE   = I_UPDMODE.
        G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
        G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
        APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
    Fill range tables for fixed InfoSources. In the case of generated
    InfoSources, the usage of a dynamical SELECT statement might be
    more reasonable. BIW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
        LOOP AT G_T_SELECT INTO L_S_SELECT.
          CASE L_S_SELECT-FIELDNM.
            WHEN 'PRDHA'.
              WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
              IF WGF_PRDHA_LENGTH = 6.  "PARTIAL PRDHA
                 WGF_PRDHA = L_S_SELECT-LOW.
                 CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
              ELSEIF WGF_PRDHA_LENGTH = 12.  "FULL PRDHA
              MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
              APPEND L_R_PRDHA.
              ENDIF.
            WHEN 'MATKL'.
              MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
              APPEND L_R_MATKL.
          ENDCASE.
        ENDLOOP.
    reset the index of where we are in the gt_header table
      g_tabix = 0.
      perform populate_default_variables.
      perform get_data.
      perform build_detail.
        EXIT.
      ENDIF.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
       IF G_COUNTER_DATAPAKID = 0.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between InfoSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
      DESCRIBE TABLE LT_DATA LINES l_count.
      IF g_tabix GE l_count.
        RAISE no_more_data.
      ENDIF.
    *CLEAN UP THE OUTPUT TABLE
      refresh E_T_DATA.
      LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
        APPEND LS_DATA TO E_T_DATA.
    Set global counter
        g_tabix = g_tabix + 1.
      ENDLOOP.
       G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
    ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.
    Forms
    ***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
    *&      Form  populate_default_variables
          text
    -->  p1        text
    <--  p2        text
    FORM populate_default_variables.
      data: wlf_name like tvarv-name.
      clear: R_prdh3[], wlf_name.
    *get the exclusion range from tvarv for the product hierarchy in
    *question
      concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
    SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
                                 NAME = WLF_NAME.
      move:  'I'    to R_prdh3-sign,
             'EQ'   to R_prdh3-option.
      append R_prdh3.
      clear R_prdh3.
    ENDSELECT.
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
    CLEAR L_R_LABOR[].
    SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
                                 NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
      move:  'I'    to L_R_LABOR-sign,
             'EQ'   to L_R_LABOR-option.
      append L_R_LABOR.
      clear L_R_LABOR.
    ENDSELECT.
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
    ENDFORM.                    " populate_default_variables
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    FORM get_data.
      data: wlf_lmeng like vbep-lmeng.
    *get all deliveries for date range for either a range of product hrchy
    *or a like value
      refresh int_records1.
      if wgf_prdha ne space.
        select ivbeln iposnr iKLMENG jvkorg i~werks
               imatnr imeins mprdha mmatkl
        from vbap as i
           INNER JOIN VBAK AS j
           ON ( jvbeln = ivbeln
                and j~vbtyp = 'C' )
           INNER JOIN vbuk AS k
           ON ( kvbeln = ivbeln
                and k~lfgsk <> 'C'
                and k~gbstk <> 'C' )
           INNER JOIN vbup AS l
           ON ( lvbeln = ivbeln and
                lposnr = iposnr
                and l~lfgsa <> 'C'
                and l~gbsta <> 'C' )
           INNER JOIN mara AS m
           ON ( mmatnr = imatnr
    {Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
                and m~lvorm eq ' '
                and m~mstae ne '99'
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                and m~extwg = '080' )
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
           INNER JOIN marc AS n
           ON ( nmatnr = imatnr
                and nwerks = iwerks
                and n~lvorm eq ' ' )
    }End of insert by SRangaraj on June 21, 2005 >>RD3K915762
        into table int_records1 where ( i~abgru = '  '
                                     and i~klmeng > 0
                                     and m~prdha like wgf_prdha
                                     and m~matkl in l_r_matkl
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                     and m~labor in l_r_labor ).
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
      elseif not l_r_prdha[] is initial and wgf_prdha = space.
        select ivbeln iposnr iKLMENG jvkorg i~werks
               imatnr imeins mprdha mmatkl
        from vbap as i
           INNER JOIN VBAK AS j
           ON ( jvbeln = ivbeln
                and j~vbtyp = 'C' )
           INNER JOIN vbuk AS k
           ON ( kvbeln = ivbeln
                and k~lfgsk <> 'C'
                and k~gbstk <> 'C' )
           INNER JOIN vbup AS l
           ON ( lvbeln = ivbeln and
                lposnr = iposnr
                and l~lfgsa <> 'C'
                and l~gbsta <> 'C' )
           INNER JOIN mara AS m
           ON ( mmatnr = imatnr
    {Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
                and m~lvorm eq ' '
                and m~mstae ne '99'
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                and m~extwg = '080' )
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
           INNER JOIN marc AS n
           ON ( nmatnr = imatnr
                and nwerks = iwerks
                and n~lvorm eq ' ' )
    }End of insert by SRangaraj on June 21, 2005 >>RD3K915762
        into table int_records1 where ( i~abgru = '  '
                                     and i~klmeng > 0
                                     and m~prdha in l_r_prdha
                                     and m~matkl in l_r_matkl
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                     and m~labor in l_r_labor ).
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
    endif.
        sort int_records1 by vbeln posnr.
        delete adjacent duplicates from int_records1 comparing
        vbeln posnr.
    *remove unnecessary records
        if not r_prdh3[] is initial.
        DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
        endif.
    *get the schedule lines for all of the above records and
    *get the lowest schedule line date per so line item
         if not int_records1[] is initial.
         refresh int_records3.
         select vbeln posnr etenr mbdat into table int_records3
         from vbep for all entries in int_records1
                           where vbeln = int_records1-vbeln and
                                 posnr = int_records1-posnr and
                                 lmeng > 0.
         sort int_records3 by vbeln posnr etenr mbdat ascending.
         loop at int_Records1.
           loop at int_records3 where vbeln = int_records1-vbeln
                                  and posnr = int_records1-posnr.
             int_records1-mbdat = int_records3-mbdat.
             modify int_records1.
             exit.
            endloop.
         endloop.
         refresh int_records3. free int_records3.
         refresh int_records2.
    *get the deliveries and calculate the open quantities
        select vbelv posnv vbeln posnn rfmng plmin
                    from vbfa into table int_records2
                                  for all entries in int_Records1
                                  where vbelv = int_records1-vbeln
                                    and posnv = int_records1-posnr
                                    and VBTYP_N = 'J'. "Dels
    *calculate open quantities next
         loop at int_records1.
           clear wlf_lmeng.
           clear int_records2.
           loop at int_records2 where vbelv = int_records1-vbeln
                                    and posnv = int_records1-posnr.
           case int_records2-plmin.
             when '-'.
              wlf_lmeng = wlf_lmeng - int_records2-rfmng.
             when others.  "just add
              wlf_lmeng = wlf_lmeng + int_records2-rfmng.
            endcase.
           endloop.
           int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
           int_records1-vbeln_dl = int_records2-vbeln.
           int_records1-posnr_dl = int_records2-posnn.
           modify int_records1.
        endloop.
        endif.
        delete int_records1 where klmeng le 0.
        refresh int_records2. free int_Records2.
    ENDFORM.                    " get_data
    *&      Form  build_detail
          text
    -->  p1        text
    <--  p2        text
    FORM build_detail.
        LOOP AT int_records1.
    *DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
        move: int_records1-vkorg    to LS_DATA-VKORG,
              int_records1-werks    to LS_DATA-WERKS,
              int_records1-matnr    to LS_DATA-MATNR,
              int_records1-klmeng   to LS_DATA-KLMENG,
              int_records1-mbdat(6) to LS_DATA-YEARMONTH,
              int_records1-meins    TO LS_DATA-MEINS,
              int_records1-vbeln    TO LS_DATA-VGBEL,
              int_records1-posnr    TO LS_DATA-VGPOS,
              int_records1-vbeln_dl TO LS_DATA-VBELN,
              int_records1-posnr_dl TO LS_DATA-POSNR,
              int_records1-mbdat    to LS_DATA-WADAT_IST,
              int_records1-PRDHA    to LS_DATA-PRDHA,
              int_records1-matkl    to LS_DATA-MATKL.
        APPEND LS_DATA TO LT_DATA.
        clear: LS_DATA.
        ENDLOOP.
    ENDFORM.                    " build_detail

  • Change Selection criteria for existing report in Report painter

    Hi Experts,
    We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
    Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report  to add new fields or not? Is that we need to create new report for this?
    Thanks in advance..
    Shilpa

    Shilpa-
    In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
    Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
    Hope this helps.
    Shail

  • Payment run error "No check exists which meets the selection criteria"

    I have done a payment run successfully, maintained a variant for the check print program but when I want to display the cheques i get this error: " No check exists which meets the selection criteria"  
    I have mantained the check lot for the house bank and the ID as well.
    What could be the problem? Please help.
    Regards
    Debra

    Hi
    I have checked FBZP t. code and the check lots , all seem to be in order. I still have not found out where the problem is.
    Thanks Shammi
    Regards
    Debra

  • Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

    Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

    The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names.  This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
    for this DNS name exisits in the DNS database.  Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
    service on this computer is restarted.

Maybe you are looking for

  • Convert jsp page into xml  or dom for search

    Hello everyone, I have to build an application that searches for message beans in all jsp page. I did it the traditional way, using scanner and string methods. Its working but its not perfect. So i want to convert all my jsp page into xml format and

  • How to create a clone of database from STANDBY?

    How can i clone a database from physical standby database?

  • Changes to Limit Orders in SRM do not replicate to ECC

    Hello Gurus, I am using SRM 7.02 Extended Classic with ECC 6.0.  We are having issues when making changes to a Limit Purchase Order.  Once the change is made and Ordered, the information does not update the ECC PO. An additional output must be genera

  • Regarding import process

    Dear SAP GURUS Info regarding import process: Customer request: customer would like to implement the import process: the requirement is purchasing will order the parts to the foreign vendor. after receivng the B/L,I/V, purchasing will do the GR and 

  • Error when encrypting external hard drive

    When I tried to encrypt my external harddrive I get the message "Core storage volume is already encrypt". And it isnt. It has been but i decrpyted it for a couple of days, and no I cannot encrypt the disk. Can any1 help me?