DB15 Male to RJ45 Male for T1 cable (urgent!!!)

DB15 Male to RJ45 Male for T1 cable
Anybody know what is the pinout information for this cable, this is urgent, thanks for any clue.

Check the table at the bottom :
http://www.cisco.com/en/US/products/hw/routers/ps332/products_installation_and_configuration_guide_chapter09186a008007e0b6.html
Hope this helps.

Similar Messages

Lightning Male to Female Cable

I need to connect an iPod with lightning connector to a dock with lightning connector. The problem is that I have a case on the iPod that prevents connection. The easy solution would be a lightning male to female cable. As far as I can tell this does not exist. Any ideas on this?

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

Female dvi to male mini-dvi cable?

I bought the wrong cable from apple (happens sometimes), had it too long to return.
I have a mini-dvi to s-video cable which I needed a dvi to s-video cable instead. is there a female dvi to male mini-dvi cable that can make it useable?

never mind. was the right cable. wrong computer.

30 pin male to female cable

Just got a Micropack battery. Provides 8 hours of video play. Problem is when you place the Touch into the dock, you have to turn everything sideways in order to view movies in landscape mode. I am trying to locate a 30 pin male to female cable so I can plug the female end into the dock and the male end into the Touch. That way the power pack can be seperate from the Touch and I can watch video in landscape mode with relative ease. I have searched the web and cannot find this simple cable. Any suggestions? Thanks
<SCRIPT language=JavaScript>

</SCRIPT>

http://shengyihtech.manufacturer.globalsources.com/si/6008800656103/pdtl/iPod-ac cessory/1001067840/30-PIN-Connectors.htm
That?

I have an 2007 mac book pro that does not have a place for HDMI cable. Can you please tell which converter I need?

I have an 2007 mac book pro that does not have a place for HDMI cable. Can you please tell which converter I need?

You will need something such as this:
http://www.amazon.com/A-Sonic-HDMI-HD15-Male-Cable/dp/B001OLCHJ6
Ciao.
Note that this will only transmit video. If you need sound, the audio output port will have to be tapped.
Message was edited by: OGELTHORPE

Is the airport extreme just a replacment for your cable modem?

What exactly is the airport extreme? I been thinking about buying one but I want to know what does it exactly do. Is it a replacement for your cable modem that creates a wireless network?

No it is not a replacement for your cable modem. Airport Extreme allows you to access the Net wirelessly. Your cable modem gives you your broadband access to the Net, but you have to connect to it via an Ethernet cable (RJ45). If you own a Apple Laptop, like an MacBook you need a wireless connection. Apple’s Airport Extreme gives you this access. Also it comes with the latest wireless speed “n”, verses “g” and “b” before it. In fact it will do all three speeds.
I have a “b” speed desktop system that is connected via an Ethernet cable, and two laptops that use the new “n” speed and one laptop that is running under the “g” speed. The best part is that you can plug a printer or hard-drive via an USB cable and share it with other computers on you home network. Also it very easy to use. If you don’t have a Laptop there is not much use for this product.

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable?

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable? It automatically gets disconnected and then get connected again.

That is shorter than normal. Any signs of wear? And you're sure it's the cable, not one of the pins in the iPhone's charging port?

Is Tiger compatible with Syst 9 for Bigpond Cable!?

Hi I need Syst 9 running in the background for my bigpond cable apparently!? I read somewhere that Tiger is not compatible?! Is this true?

Cec,
You stated/asked...Hi I need Syst 9 running in the background for my bigpond cable apparently!?BigPond makes no such claims on What are the Cable system requirements?
According to that page OS 9 is not, nor would I expect it to be a requirement for a cable connection.
By the way, Tiger does support OS 9, which is known as Classic. Mac OS X provides a compatibility layer called Classic that runs a complete Mac OS 9 installation within OS X for applications and hardware that require OS 9.
I have lost track of which computers can start (Dual Boot) using classic, your machine may or may not be able to start up in Classic.
;~)

I have a Ipad mini and I am looking for a cable to go from my ipad to an Epson xp 400 printer, any ideas

I am looking for a cable to go from my Ipad mini to my epson xp 400 printer.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

Any one working have come across pre-verified jars for LDAP? Urgent.

Any one working with BlackBerry, have come across pre-verified jars for LDAP? Urgent. Please let me know where I can get these.

Hi
What about a daily workschedule variant for the Sunday DWS?
Then you can define different handling for different groups of people (by psg)
Cheers
Mary

Male to male iphone audio cable with volume

Has anybody found a good quality male-male audio cable with volume control? This is for an iPhone 5

if you mean an 3.5mm minijack cable then you would require an external power source to inc the volume it play

Male to female cable

Does a "Male connector" to "female connector" cabe exist?
I need to connect my iPod to the top connector of the iPod HiFi in a remote manner.
My bookshelf does not have the height to fit the iPod ON TOP of the iPod HiFi...

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

Looking for specific cable

I just looked in the store and Apple doesn't seem to sell this, but I am looking for a female/male connector cable. Essentially, I need a cable that replicates an iPhone dock at one end (male) and then plugs into the dock with the female end so I can tether my iphone to my dock. The reason is I can't fit the phone in the dock with the protective cover and it's a pain to remove every morning, as well as the fact that it eventually stretches the plastic cover out taking it off and on repetitively.
If you've seen one of these somewhere, please let me know.
Thanks

EllsbirdAgain,
There is two ends, one that goes into the dock, one that goes into your computer. The end currently connected to your dock is a dock connector. The other end is a USB connector that goes into your computer.
The one that goes into the dock can also connect directly to your iPhone.
Essentially I am recommending bypassing the dock if your case gets in the way of using the dock.
This is page on the Apple Store online shows what both ends look like:
http://store.apple.com/us/product/MA591G/A (Note: That is the replacement cable for what came with your iPhone)
Hope this helps,
Nathan C.

Need instructions for Enhanced Cable Tech "Liberty" VGA adapter....

Hi!
I'm trying to get my old PowerMac 8500 up and running. The only display I have that is (well, should be...) compatible is an old Apple Studio Display 15" Flat Panel (Rev B.). This is the second iteration of that display, with the VGA connection, not the earlier Mac 15 pin D-sub connection, which is what the 8500 has (http://support.apple.com/kb/SP135).
I have two adapters that I'd think should do the trick of getting me something on the display. An NEC MultiScan unit that has several resolutions printed on it, but no adjustments, and an Enhance Cable Technologies Liberty adapter.
The NEC one gets me noplace, and so far, neither does the Liberty.
The Liberty has a knob with several letter stops (A-M or N), and a set of 9 (I think) DIP switches. Instructions on the back list many resolutions, but only give instructions for the last 3 DIP switches, which are for sync. It mentions to consult the instructions (which I can't find or don't have) for using the other DIP switches to get "expanded" ID codes.
I've tried all of the knob stops, and a couple DIP switch settings, but nothing seems to get me an image on the display. The display does work, it just isn't detecting a signal, and it will tell me so.
I think the 8500 may be going into "headless" server mode (no video) when it can't detect a monitor attached, so once it boots (and it IS booting), I can't get anything until I re-boot again. I'll have to dig up an OS9 install CD, to see if that helps me any. When I stored it some years ago, it was running Mac OS X 10.2 via a boot loader (it has a Sonnet PPC G3 processor upgrade card), so that may be an issue, too.
But, I was hoping that maybe someone has the instructions for the Liberty adapter kicking around in their junk drawer. All I need is the instructions for the DIP switch settings.
Regards,
Larry W.

Well, bought some new PRAM batteries from OWC. Installed one on the 8500/150 (also bought spares for my G4 & SE/30), zapped the PRAM several times, and still nothing. Then dug out my DVI-VGA adapter for my MBP, just to verify that nothing had gone sour with the display since I last put it in the box. All good there.
But, it turns out that I had a solution all along in the "Accessories Kit" in the box the Studio Display came with. There was, still sealed in 16-year-old plastic, an adapter that came bundled with the display! Cut open the plastic, installed it, hooked on the display, and presto-chango, I'm watching Jaguar boot up!
Though, Jaguar isn't so swift on this machine, even with a 250Mhz G3 processor... Might have to do with only 240MB of RAM... Once I got it back running Mac OS 9.1, though, it's a pretty snappy machine. It even reports a processor speed of 279Mhz!
Now I can get what I need from the machine, and move it on to a new home. Also check out all the rest of my SCSI devices for data I think I need, as this is my last SCSI machine that'll take more than one internal device!
And I may even see if I can make the Liberty adapter work like the Apple-supplied one.

Looking for a cable that does audio out from the dock connection

I would like to use the iphone with the aux in on my car stereo. I have my iphone in a proclip cradle that is mounted to the dash. I would like a cable that plugs in to the dock connection on the bottom of the iphone and goes into the aux in on the front of my car stereo. I really don't want to use the headphone jack on the top since I have to use the adapter, and after you plug that in to the iphone, and then the cable into that, it sticks up like a mile in the air. Does anyone know of any cables that will work for me??

I have an old 512 MB iPod Shuffle that I gave my 8-yr old son and as well as an iPod Nano that I recently purchased for my daughter. I tried to use my car AUX (Honda Jazz) to play from my iPhone and looks like it does not work for my iPhone (yes, I made it to work in Vodafone network in New Zealand). Then I tried with the old iPod shuffle and it works fine as well. Lastly I tried with iPod Nano and looks like it works with iPod Nano as well. Later I tried with a Samsung headphone to see if it did work with my iPhone (instead of iPhone headphone), it worked well. I am not sure what to do now. I might call Apple to see if they have anything that'll work for iPhone.
Cheers,
S

DB15 Male to RJ45 Male for T1 cable (urgent!!!)

Similar Messages

Maybe you are looking for