DB2 parameters for SAP Unicode system

Hi,
Can anybody guide us on specific and important DB2 9.7 parameters for our UNICODE SAP system.
The parameters on the note: 1329179 has been already taken into consideration.
But if anybody has the experience to set particular parameters please let us know the same.
Best Regards,
DVRK

Hi,
All the parameters has already been mentioned in the note. There are no other parameters that need to consider.
Thanks
Sunny

Similar Messages

  • Line incomaptibilty betwwen RAW and CHAR data types in SAP Unicode System.

    Hi Gurus,
    I am working in SAP Unicode system.
    We have transferred the standard programs for Non-Unicode to Unicode system.
    In one standard function module, <table name> is defined in TABLES parameter as a type of TLINE structure, which has two fields - one is 132 length CHAR and other is 2 length CHAR.
    In the same function module , one subroutine is being called, for which <table name>  is passed.
    But in the FORM of subroutine, this table is defined as a type of HLINE, which has only one field - 134 length RAW data type.
    So due to confilct in data types ( CHAR and RAW ) , I am getting an error that both data types are not line compatible.
    Do i need to use casting concept to remove the error.
    Please suggest me the way to handle this.

    hi,
    declare the table as same data type.
    dont go for any other types.
    if you still want the form table as HLINE, then before the form call declare a varibale with TLINE data type pass the values to HLINE.
    i think this will be little complex, because again it will be type incompatablity.
    we can forcefully pass the values to HLINE with a class.
    but i think no need, declaring with same data type might be easy.
    Thanks
    Vinod

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • ChaRM for SAP BI systems?

    Hi!
    We would like to implement ChaRM functionality for our SAP system landscape.
    Among others we have 3 SAP BI systems.
    Does some one experience with set up of ChaRM for SAP BI systems?
    Do we have here a different approach as for other systems (e.g. SAP ERP 2005)?
    Thank you very much!
    regards
    Thom

    Hi Thom,
    we are using a ECC landscape, a BI landscape, a Solution Manager landscape, and a CRM landscape within CHaRM. All landscapes are separate transport landscapes, and there is a transport domain link from SolMan Production system (as this is the transport domain controller).
    To answer your question: The approach is all the same for any landscape (as long as they are just ABAP systems). The approach is different for Dual-Stack of Java systems, you would need CTS+.
    Best Regards,
    Holger

  • Do we have a separate forum for SAP Project Systems?

    hi
    do we have a separate forum for SAP Project Systems?
    regards
    kish

    hi all
    i got the answer
    its the PLM forum ie. product life cycle management
    Expert Forums  » SAP Solutions  » Product Lifecycle Management (PLM)
    cheers
    kish

  • CP850_BIN2 for non unicode systems??

    Hi All
    This is possibly a really stupid question and I think I know the answer, but I need some one else to say yes!
    We are currently running a SQL upgrade, from 2000 to 2005, for ore ECC6 platform. As part of the upgrade it is recommended that you change the DB collation from SQL_Latin1_General_CP850_BIN to SQL_Latin1_General_CP850_BIN2 which allows unicode data to be sorted properly.
    My question is, if this enhancement is to correct a unicode issue, will it affect my current non-unicode system if applied. I don't want it to cause any issues if I apply it during the upgrade.
    I don't think it will for various reasons, but I am not 100% can anone let me know if I am right, please!
    Thanks in advance!
    Phil

    Hi,
    you will have no issues with your current system when you go to BIN2 now (before you upgrade to SQL 2005). And you have to keep in mind, that you have to have BIN2 for all newer releases of SAP. So if you plan to ever upgrade your system to a newer release in some point in time, you should go to BIN2 now, as otherwiese you have to perform a homogenous systemcopy with R/3 (which is not so much fun) if you miss it now. On SQL 2005 you can't change the collation easily, so if you don't have the correct one, you only can change it when you unload the data, drop the DB, create the DB in the correct collation and reload the data.
    Regards
      Clas

  • Perosonas for non unicode system

    Our system is not yet Unicode enabled. I heard that presonas are only enabled for Unicode sysmtes? Is that true? What about Fiori ? Is Unicode a prerequisite for that also?
    Thanks,
    Ramesh

    Hi Ramesh,
    Personas are supported by SAP only on Unicode systems. Check note http://service.sap.com/sap/support/notes/1884539
    For Fiori is not a prerequisite.
    Regards,
    Vasilis

  • MM configurations for SAP AFS System

    Hi,
            I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
           Errors : Purchase order xxxxx has no items,
    Once created sales order for the same material again we got the error while GR but error is different.
          GR is not possible for this PO number.
    But material type is ROH , and its external procurement only.
    Please let me know when we will get this type of errors.
    Thanks and regards
    Nisar.

    Hi Nasir;
    Some possible causes are;
    1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
    2.     Not releasing the PO before the GRN
    3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
    Azwath Mohammad
    http://www.sapafs.net

  • How can generated EWA for SAP Portal system

    Hi Guru there,
    Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
    How can I generate EWA from solman?
    waiting for your kind reply!
    best regards,
    WEI

    Hi Wei,
    Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
    This SAP Note describes the setup of EWA for NON-ABAP Components.
    Please see the description and the attachments.
    Best regards,
    Ruediger

  • Naming changes for SAP business systems

    Hello
    I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
    My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
    Thanks in advance.
    Regards
    Rajeev Patkie

    Hi Rajeev,
    The Business system details like the client and logical system etc, help the proxy to know where it has to go.
    Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
    Also you sender XI adapter is attched to this Business system.
    No what is your receiver? You haven't specified that?
    Also, you can just reactivate the PROXY once.
    Cache refresh??
    Regards
    Vijaya

  • Client strategy for SAP Discovery system

    Hello,
    We have installed SAP Discovery system and would prefer to create custom clients copied from the standard clients for use by the users. Please let me know if there are any restrictions or possible problems creating custom clients in SAP Discovery system.
    Thank you,
    Vijaya

    Hi,
    There are no restrictions for creating custom clients on the Discovery System box.
    It is highly recommended to backup your current server before customizing the box so you can return to the original state if needed.
    Regards,
    Amir

  • Administration DB2 V9 for SAP

    Hello,
    I´m new in DB2. We have installed SAP ERP2006 on AX and DB2 V9. I have experience with Oracle. In administration tasks (reorganization, extend tablespaces, change logging,...) we used the SAPDBA utility.
    My question is - does exist some database administration utility like SAPDBA for DB2?
    If not, what utility can be used for basic administration procedures?
    Thank You
    Zeno Novak

    Jennifer,
    Here is the link to SAP-DB2 handbook.
    http://www.redbooks.ibm.com/abstracts/sg246765.html?Open
    For the SAP Admin guide, you can get that from SAP Service Market place
    https://websmp201.sap-ag.de/instguides
    Go to Netweaver Section>Release 2004> Operations-->
    to download the following guide
    SAP Database Admin. Guide - IBM DB2 UDB for UNIX and Windows
    Raja

  • Documents of RF Transaction for SAP EWM system

    Hi Team
    I need documents and how to devlop the" RF transaction" for the SAP EWM(Extended warehouse management) system.
    Thanks in Advacne.
    Abhishek

    Check this link, it should help you:
    http://www.knowscm.net/knowledge/rf-cookbook
    Cheers,
    Koen.

  • Selection Parameters for SAP Query

    I have difficulty in displaying the SAP Query selection parameter in my result screen.
    Even the ALV Selection option at the Print dialog is not working in this SAP Query (working for ABAP developed ALV report).
    Any help will be much appreciated.

    > Yes SAP Query.
    > The printing is printing out the SAP Query result, even mentioned in my 1st statement.
    > Is my language that bad or you have difficult understanding English?
    I have no difficulty in understanding English but in understanding your problem. If someone says only "it's not working" I must ask, what "it" is.
    Is your problem the fact, that the selection criteria is not printed if you use ALV but printed if you use an ABAP list? Or is printing not working alltogether?
    Markus

  • 10g parameters for Task Audit System 9

    Does anyone have suggestions regarding how to optimize for USER I/O during a metadata load the TASK_AUDIT table on 10g?
    The ADDM report suggests Segment Tuning and Application tuning (Application tuning not possible since it is HFM code.) Looking at a relatively large application, the database improvement would be about 10 minutes if we could minimize the USER I/O waits for this table.
    If you do not have a database recommendation, does anyone know if I can stop the logging of the task audit until metadata load completes?
    Thanks,

    We daily backup this table to a versionning table, and truncate it, it is much smaller and than the performance impact is much less
    do you need to keep the whole thing??

Maybe you are looking for