DB2 restore very slow

Dear Experts,
We are setting up a DR server for the existing production server. The OS is Windows 2003 R2 SP 2. Database is "DB2 v8.1.12.99"
We have bought new HP hardware to setup the DR server. While restoring the database backup of Production server from filesystem (local) on the DR server the restore is extremely slow. Its about 1 GB per hour. I have checked whether the restore is running using the "db2 list utilities show detail" command and it shows the restore progress in bytes and it is definitely running. I have tried to restore on an IBM server with same configuration and the restore is complete in 4 hrs.
I cannot figure out what the problem is.. There are no errors in db2diag. I have the feeling if it is a hardware issue and the RAID 5 read / write cache has to be set??
Please advise if any DB2 parameters are to be changed and how to change those so that the restore is done normally.
Thank you

Hello,
Please check the following links:
Optimizing restore performance
http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.
jsp?topic=/com.ibm.db2.luw.admin.ha.doc/doc/c0011912.html
Optimizing backup performance
http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.
jsp?topic=/com.ibm.db2.luw.admin.ha.doc/doc/c0006205.html
Known APAR list for you release, seach for 'restore'
https://www-304.ibm.com/support/docview.wss?uid=swg21255352
You couls also try a redorected restore from tape to another system, if you get similar data throughput speeds, you should liaise with the tape vendor on this.
Regards,
Paul

Similar Messages

Time Machine - Restore very slow - impossible to use

Hi,
As far as I can tell my Time Machine backups are OK. When I click the back-in-time arrow with a very small file selected it takes several minutes before I can use it again. The TM gives the impression of having frozen. Similarly if I use the Finder to look at the backup files on the external disk the machine spends very long periods of time 'fetching'. I have no reason to suspect my hard disk - it is the same with another disk. I've read all of the postings on this Forum. I am thinking about re-installing my OS from Install DVD (10.5) and updating to 10.5.5!
I see on the Console things like QL ERROR 'Creating thumbnail' time out and wonder if this is relevant.
Any suggestions before I do something silly?
Bobby

I have now re-installed my system from the instal disk, then the latest combo update. Have checked all the disks to make sure they are OK and healthy. All to no avail - Time Machine simply will not run as intended on this machine. (It works just dandy on my Intel MacBook).
As far as I know Time Machine should work with a PowerPC - perhaps not?
I'm at my wits end. It occurs to me that this is a system problem rather than a Time Machine problem.
Any ideas are much appreciated.
Bob

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Help!

My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!

Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only, as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you

My mac mini is running very slow all of a sudden, how can i restore it's speed?

my mac mini is running very slow all of a sudden, how can i restore it's speed?

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Very slow connection with db2 ver 9.1 client on win2000

I have been having difficulty in diagnosing why when after installing db2 9.1 fp5 client on our wind2000 box which has Crystal Embedded 10 RAS ( service pack 6 ) running, the reports that i am invoking using the Java SDK ( we have an online J2ee web application ) are very slow. I have narrowed the problem area down to where the java sdk is trying to set the table location.
Using the db2 7.1 client since 2005, we have not had this issue. We must upgrade to ver 9.1 db2 since this is being done at an enterprise level. I upgraded our test server to 9.1 and noticed this slowness. With the 7.1 db2 client and the same RAS server, the reports take about 2 or 3 seconds but with the 9.1 client the reports take about 40+ seconds each and this is always as the setTableLocation method. Once is goes through this, the rest runs fine.
I have tested this with a local db2 datbase on windows, a remote db2 database 3000 miles away ( same as with what the 71 client runs against) and it is consistently the same response time.
I did notice that if I ran my java online on the same server as the RAS server, the response time is great. This only seems to be happenning when the java app is not on the same server as the RAS server.
I also have a java stub that does not run in a web container. in this case, with the same code and the same databases, whether i am local or remote from the crystal server, the response time is 40+ seconds to connect.
The .rpt files are developed via Crystal Reports 10 and we develop on a local database and we modify the database credentials throught the SDK as we deploy upto production. I have also tried this with the same database we developed with and the same 40+ seconds connect time.
All of these scenarios work fine with the 7.1 client.
so it seems there is some connection issue with the 9.1 client only.
Need help urgently.

I have exactly the same issue.

HT5622 After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

New Firefox Very Slow Bookmarks all gone restore not working Can I get them back?

Woke up today to new firefox update installed. Now Firefox VERY slow & all of my Bookmarks are gone as well as Bookmarks Toolbar empty. IE runs fast like usual, but Firefox barely loading.
Tried Restore from available dates, but all come back unable to process.

Some of you will want to shoot me; Mozilla may yank this reply. BUT I had the same problem for about a week, struggled in vain, poured over the help section and got 3 replies to my posted question. Nothing, absolutely nothing worked.
Want to know what solution I finally came up with? '''''CHROME.'''''
It imported my precious bookmarks from IE and FF. I'm going to uninstall IE now and leave FF as an emergency backup browser which I don't expect to need anymore.

Disk Utility Restore function very slow

Hi,
I'm using Disk Utility to migrate my Time Machine backup from a USB 2.0 Western Digital My Book 2TB drive (1 TB RAID 1 configuration) to a 1.5 TB Seagate drive in a miniStack (FireWire 800). The WD drive is connected through the USB hub in my old Cinema Display and the mini is connected directly to my Mac mini. I have about 320 GB of data on the WD drive.
I started the Restore procedure in Disk Utility a couple of days ago, and as of now, I still have 5 days and 20 hours left before this finishes--according to DIsk Utility's estimate. Is this normal???? The progress bar is moving as expected, but it's just very very slow. I also noticed when I run Disk Warrior on the WD drive that it can take a few hours to do the analysis and then another few hours to copy the new directory onto the WD drive. Any thoughts?
Thanks in advance,
Paul

Copying TM backups is slow, but that's just ridiculous!
I'd be very suspicious of the WD drive or something, somewhere in the connections to it.
I'd be inclined to just start TM fresh on the new drive. Keep the old one "on the shelf" for a while until you're sure you don't need anything from those backups. You can always browse and restore from the old backups via the +*Browse ...+* option, per #17 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.

IMac is very slow so want to restore. How?

My iMac has become very slow and i've tried MacKeeper but still slow. I have backed up to time machine and want to restore to factory settings. How do I do it?
Many thanks
Nathan

If you really do mean MacKeeper then purhaps you may like to read this thread... https://discussions.apple.com/thread/4060390?start=0&tstart=0

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in the area.How sld I get an OS X lion to my CP?

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank you

Hi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards!

HT201210 i use iphone4 and update ios7 is very slow ,i want use ios6 please open restore ios 6

i use iphone4 8gb is very slow , i want to ios 6.1.3

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

I restore my mac air but still slow!!! what can i do? r very slow

Hey! i hace a macbook air whos osx 10.5.8 2gb ram 1.6 ghz but r very slow , i restore all like new but still slow what can i do to make it faster!?
any idea?
thanks!!!

It would help all of us if you gives us more info about your iMac.

Mail restored.... now very slow and often sends multiple versions

Email is back.... with a caveat, very slow sending.
This may be another artifact of being a 1%er.
Jim

In case you are using "Clear history when Firefox closes": do not clear the Cookies
If you clear cookies then Firefox will also try to remove cookies created by plugins and that requires to start plugin-container processes that can slow down closing Firefox.
Instead let the cookies expire when Firefox is closed to make them session cookies.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox"

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

DB2 restore very slow

Similar Messages

Maybe you are looking for