DB2E for AWT client

Hi experts,
i am trying to assign DB2E 8.2.4 on MOBILE AWT client(SP 18 ), but when i click on START button of MI Client Installer of DB2E it shows me some error as follows :-
installation failed: version check for appliaction 'MOBILEENGINE_JSP' failed;'null' (installed version) greater equal '2514' returned false(used prefix match)..
I think that DB2E for AWT client is different,is it so ?? and if yes please let me know where can i get the one specific for AWT client.
Also is it so that JQuery not supported exception occurs when DB2E is not installed on client??
Thanks in advance,
regards,
rajesh

Hi,
can you not install the DB2e manually for a test to see if your landscape works as such?
Steps are described in the DB2e install file - have a look into the XML.
And by the way - for a test instead of having no solution for a few days - there is the number mentioned in the setup file you would need at least to install that DB2e - I would simply change that number as long as I have no better solution.
Hope this helps.
Regards,
Oliver

Similar Messages

MI AWT Client on PPC - error

hi all,
I'm trying to start the MI AWT Client on a PPC(emulator) running on Windows Mobile 5.0 OS.
here's the log i got from jscpout.txt

NSIcom Ltd., CrEme(tm)
CrEme J2ME(tm)
CrEme V3.27 B095.040628 12-September-2005
MemoryLimit=29184Kb
Unable to load: gfw/gfwconf
EBCI(TM) Interpreter V1.00,
Copyright 1998-2002 by Bytecodes, Inc.
Do not use the MobileEngine classloader
Initialize framework ...
 Configuration initialized. Installation Base = /MI
 Path settings adjusted
 Timezone initialized; use timezone id 'PST'
 Trace initialized. Log is switched on.
 Framework singletons initialized.
 Gzip data compression configuration initialized.
 Registry initialized.
 MI OS installer lib (/MI/bin/NATSTART.DLL) loaded successfully.
 Dlls loaded.
 Timed Sync initialized.
 Persistence initialized.
 Smart Sync initialized.
 CCMS initialized.
 Agents initialized.
 Communication server initialized.
java.io.IOException: SysCall : bind() failed
 at java.net.PlainSocketImpl.bind()
 at java.net.ServerSocket.<init>()
 at java.net.ServerSocket.<init>()
 at com.sap.ip.me.core.CommunicationServer.run()
 at java.lang.Thread.run()
Framework initialized.
Check if running inside installation server.
Installation toolkit parameters /MI/itool.properties not detected
Use normal startup: true
Cannot start awtHome: null
java.lang.reflect.InvocationTargetException
 at com.sap.ip.me.core.FrameworkInitializer.startAwtHome()
 at com.sap.ip.me.core.FrameworkInitializer.main()
 at com.sap.ip.me.core.Startup.main()
Can someone help me in this regard?
thanks
Arunkumar
PS: Points assured for useful posts.

hello arun,
possible reasons for the exceptions:
>java.io.IOException: SysCall : bind() failed
CommunicationServer uses 45000 port number. It could be
that the emulation environment does not allow you to open
sockets or the port number is already used by other programs.
>Cannot start awtHome: null
>java.lang.reflect.InvocationTargetException
this happens if the framework could not find the class
file from your classpath. you have to check whether your
classpath have to be the actual paths or the virtual paths
as seen from your emulator.
regards
jo

Looking for a client appointment app

I'm looking for an application for a friend who is a personal trainer. And if such an application doesn't exist, I'm considering writing one (I'm a software engineer)
The application would maintain a database of clients, and a schedule of appointments with them.
For each client, the following data needs to be maintained: contact information, current statistics (weight, body fat percentage, strength) as well as a history of statistics. Clients pay for a package of sessions in advance, and the app would keep track of how many prepaid sessions remain, updating that number with each scheduled appointment and each payment. Every client has recurring appointments, several per week, but rescheduling is common, and needs to be easy. And the app should be able to print out a year report for taxes.
I was thinking that it should interface with Address Book for contact information, and Calendar for appointments.
The main app should run on Snow Leopard, but mobile access through an iOS 4 sister app would be great. (Although if it works with Address Book and Calendar, their synchronization through MobileMe might be sufficient)
Is there any such thing? There must be other trainers, and other professionals with similar needs.
-Ron.

Hi Ron,
was there a template for bento that met all of the requirements that you detailed? My wife is a personal trainer and we've been looking for similar functionality in an app. Currently she's using the calendar app and contact book, but as you say, rescheduling is frequent and tracking remaining sessions would be very helpful. Let me know,
Paul

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

Onedrive For business client problems

Hello,
We run a Sharepoint 2013 on a windows server 2008 r2 and would like to start using OneDrive. Now all i can find on installing the Onedrive for business client on our client computers is just, select Onedrive menu and click the "Sync" button on
the top right corner. When i do that it starts installing Sharepoint WorkSpace on my computer and that's basically how far i've come.
Is it something that needs to be setup or what do i haft to do?
Client machines run windows 7 with Office 2010.

Hi Paul Stork,
There was no way to bring your attention to a problem you can help find a solution to with your expertise.
Please can you help me out find out a way to hyperlink checkbox functionality in SP 2010 lists?
You would find more details on this page:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e881b9ef-7816-4ea8-a744-501d041b36ca/list-checkboxes-to-be-hyperlinked?forum=sharepointcustomizationprevious#2cb064ea-9165-4d46-8757-d44ce6219de6
Thanks in advance,
Abhilasha

OneDrive for Business sync prompts for ODfB client install

Working with a client that has installed Office 2013 ProPlus on an image that is being deployed. Users currently logon to their computer with a local account (Active Directory in process of being deployed).  User is "migrated" and begins
to logon to Active Directory. User now logs on to the O365 portal and accesses their OneDrive site, not yet populated with documents. User clicks "sync" and is prompted to install a OneDrive for Business client, even though it has
already been installed as part of Office 2013 ProPlus. Install proceeds and Internet Explorer closes. Once install has completed, user logs on to O365 portal and attempts to sync OneDrive.   User is prompted again to install the appropriate
client.
I have tried clearing IE cache, launching IE in InPrivate mode and using Chrome.   Same behavior.
Any suggestions?
Thanks,
[email protected]

New fun behavior noted:
New behavior. Similar scenario:   User logging on to PC with a local account.   Office 2013 ProPlus, including ODfB is installed.   User is NOT currently using ODfB. Using Word
2013, Excel 2013, PPT 2013, Outlook 2013 ( connecting to Office 365 mailbox) and Lync 2013 (connecting to Lync Online) are being used by the users. Users machine is joined to a domain, User local account profile is migrated to domain profile.
User logs into PC with domain account. ( Matching the Office 365 account, typically [email protected] ). User logs into Outlook and Lync with no issues. User logs into the Office 365 Portal, selects OneDrive, and selects Sync.
"Sync this library to your device for easy access" window appears. User selects Sync now.. User is presented with "Sign in Call us overprotective, but we need to verify you account again before opening "https://realgoods-my.sharepoint.com""
windows. User enter his email address and clicks Next. User is then presented with "Sign In" windows and enters User ID and password. User is then presented with the "Overprotective" window. This happens 3 times
until user gets "We cannot connect to the specified SharePoint site." error message.
IE browser cache has been cleared. Steps have been followed to clear all document cache files. sharepoint.com, microsoftonline.com, office365.com have been added to the Trusted Sites zone and added to IE compatibility list.
Any clues on this one as well????
R,
Dale
[email protected]

Cisco Jabber for Windows Client SDK

Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
All of this happens using that human's End User credentials.
Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

Setting Up Certificate Validation for Jabber clients

Hi:
I would like to get certificates signed from private internal CA for Jabber clients. Cisco documentation says it requires HTTP/Tomcat for CUPS, HTTP/Tomcat for CUCM and UCXN[8.6].
The exiting Tomcat certificate has these two files: tomcat.pem, tomcat.der and a bunch of tomcat-trust certificates as well with associated files.
My question is is there any harm in generating a new tomcat certifcate or could I just generate CSR's for the two existing Tomcat files to be signed? When you generate a new Tomcat certificate does it create or overwrite the .pem and .der? I don't want to break anything in this process so looking for some feedback.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_2_5/JABW_BK_CAAD3F25_00_cisco-jabber-for-windows-release-notes/JABW_BK_CAAD3F25_00_cisco-jabber-for-windows-release-notes_chapter_011.html

Generating a CSR for the Tomcat certificate and installing the signed certificate will replace the .pem/.der file you see listed. Once you sign the CSR and upload the final certificate, you'll need to restart Cisco Tomcat from the CLI for it to pickup the new cert. Anything that is in a -trust store is something that server will accept during a TLS/SSL handshake, not something it uses itself.

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

Using JSSE : "Invalid Netscape CertType extension for SSL client" Error

Hi all,
Im using the sample code given sun site for JSSE with Client Authentication. The sample as such it worked with the testkeys provided in that. But it didn't workout when I tried using other certificates.
Both client and server certificates I generated from our internal Netscape Certificate Manager.
Function of the server :
The server will read a private key from the given keystore and starts listening on a port. This server will server only GET request.
Function of the client :
The Client sends a GET request to the server and gets the response back.
I simply changed the key store name alone in the working sample code.
It is not working.
The Exception thrown on client side :
D:\users\Jp\java\jssesamples\sockets\client\class>java SSLSocketClientWithClientAuth1 localhost 1089 /urls
localhost
1089
/urls
java.net.SocketException: Software caused connection abort: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at com.sun.net.ssl.internal.ssl.OutputRecord.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.j(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(DashoA6275)
at SSLSocketClientWithClientAuth1.main(SSLSocketClientWithClientAuth1.java:119)
Exception thrown on server side :
D:\users\Jp\java\jssesamples\sockets\server\class>java ClassFileServer 1089 . TLS true
USAGE: java ClassFileServer port docroot [TLS [true]]
If the third argument is TLS, it will start as
a TLS/SSL file server, otherwise, it will be
an ordinary file server.
If the fourth argument is true,it will require
client authentication as well.
javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Invalid Netscape CertType extension for SSL client
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_aw.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_aw.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(DashoA6275)
at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:406)
at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:446)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:180)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at ClassServer.getPath(ClassServer.java:162)
at ClassServer.run(ClassServer.java:109)
at java.lang.Thread.run(Thread.java:536)
Caused by: java.security.cert.CertificateException: Invalid Netscape CertType extension for SSL client
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkClientTrusted(DashoA6275)
at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkClientTrusted(DashoA6275)
... 17 more
error writing response: Connection has been shutdown: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateExce
ption: Invalid Netscape CertType extension for SSL client
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLHandshakeException: java.security.cert.Certificate
Exception: Invalid Netscape CertType extension for SSL client
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.d(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.e(DashoA6275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA6275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA6275)
at java.io.DataOutputStream.writeBytes(DataOutputStream.java:256)
at ClassServer.run(ClassServer.java:128)
at java.lang.Thread.run(Thread.java:536)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Invalid Netscape CertType extension
for SSL client
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_aw.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_aw.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(DashoA6275)
at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:406)
at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:446)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:180)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at ClassServer.getPath(ClassServer.java:162)
at ClassServer.run(ClassServer.java:109)
... 1 more
Caused by: java.security.cert.CertificateException: Invalid Netscape CertType extension for SSL client
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkClientTrusted(DashoA6275)
at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkClientTrusted(DashoA6275)
... 17 more
The Client code :
* @(#)SSLSocketClientWithClientAuth.java 1.5 01/05/10
* Copyright 1995-2002 Sun Microsystems, Inc. All Rights Reserved.
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* -Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* -Redistribution in binary form must reproduct the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* This software is provided "AS IS," without a warranty of any
* kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY
* EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
* DAMAGES OR LIABILITIES SUFFERED BY LICENSEE AS A RESULT OF OR
* RELATING TO USE, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
* ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE
* FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT,
* SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF
* THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* You acknowledge that Software is not designed, licensed or
* intended for use in the design, construction, operation or
* maintenance of any nuclear facility.
import java.net.*;
import java.io.*;
import javax.net.ssl.*;
import javax.security.cert.X509Certificate;
import java.security.KeyStore;
* This example shows how to set up a key manager to do client
* authentication if required by server.
* This program assumes that the client is not inside a firewall.
* The application can be modified to connect to a server outside
* the firewall by following SSLSocketClientWithTunneling.java.
public class SSLSocketClientWithClientAuth1 {
public static void main(String[] args) throws Exception {
 String host = null;
 int port = -1;
 String path = null;
 for (int i = 0; i < args.length; i++)
 System.out.println(args);
 if (args.length < 3) {
 System.out.println(
 "USAGE: java SSLSocketClientWithClientAuth " +
 "host port requestedfilepath");
 System.exit(-1);
 try {
 host = args[0];
 port = Integer.parseInt(args[1]);
 path = args[2];
 } catch (IllegalArgumentException e) {
 System.out.println("USAGE: java SSLSocketClientWithClientAuth " +
 "host port requestedfilepath");
 System.exit(-1);
 try {
 * Set up a key manager for client authentication
 * if asked by the server. Use the implementation's
 * default TrustStore and secureRandom routines.
 SSLSocketFactory factory = null;
 try {
 SSLContext ctx;
 KeyManagerFactory kmf;
 KeyStore ks;
 char[] passphrase = "passphrase".toCharArray();
 ctx = SSLContext.getInstance("TLS");
 kmf = KeyManagerFactory.getInstance("SunX509");
 ks = KeyStore.getInstance("JKS");
// ks.load(new FileInputStream("testkeys"), passphrase);
 ks.load(new FileInputStream("clientkey"), passphrase);
 kmf.init(ks, passphrase);
 ctx.init(kmf.getKeyManagers(), null, null);
 factory = ctx.getSocketFactory();
 } catch (Exception e) {
 throw new IOException(e.getMessage());
 SSLSocket socket = (SSLSocket)factory.createSocket(host, port);
 * send http request
 * See SSLSocketClient.java for more information about why
 * there is a forced handshake here when using PrintWriters.
 socket.startHandshake();
 PrintWriter out = new PrintWriter(
 new BufferedWriter(
 new OutputStreamWriter(
 socket.getOutputStream())));
 out.println("GET " + path + " HTTP/1.1");
 /* Some internet sites throw bad request error for HTTP/1.1 req if hostname is not specified so the foll line */
 out.println("Host: " + host);
 out.println();
 out.flush();
 * Make sure there were no surprises
 if (out.checkError())
 System.out.println(
 "SSLSocketClient: java.io.PrintWriter error");
 /* read response */
 BufferedReader in = new BufferedReader(
 new InputStreamReader(
 socket.getInputStream()));
 String inputLine;
 while ((inputLine = in.readLine()) != null)
 System.out.println(inputLine);
 in.close();
 out.close();
 socket.close();
 } catch (Exception e) {
 e.printStackTrace();
The Server code :
* @(#)ClassFileServer.java 1.5 01/05/10
* Copyright 1995-2002 Sun Microsystems, Inc. All Rights Reserved.
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* -Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* -Redistribution in binary form must reproduct the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* This software is provided "AS IS," without a warranty of any
* kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY
* EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
* DAMAGES OR LIABILITIES SUFFERED BY LICENSEE AS A RESULT OF OR
* RELATING TO USE, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
* ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE
* FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT,
* SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF
* THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* You acknowledge that Software is not designed, licensed or
* intended for use in the design, construction, operation or
* maintenance of any nuclear facility.
import java.io.*;
import java.net.*;
import java.security.KeyStore;
import javax.net.*;
import javax.net.ssl.*;
import javax.security.cert.X509Certificate;
/* ClassFileServer.java -- a simple file server that can server
* Http get request in both clear and secure channel
* The ClassFileServer implements a ClassServer that
* reads files from the file system. See the
* doc for the "Main" method for how to run this
* server.
public class ClassFileServer extends ClassServer {
private String docroot;
private static int DefaultServerPort = 2001;
* Constructs a ClassFileServer.
* @param path the path where the server locates files
public ClassFileServer(ServerSocket ss, String docroot) throws IOException
 super(ss);
 this.docroot = docroot;
* Returns an array of bytes containing the bytes for
* the file represented by the argument path.
* @return the bytes for the file
* @exception FileNotFoundException if the file corresponding
* to path could not be loaded.
public byte[] getBytes(String path)
 throws IOException
 System.out.println("reading: " + path);
 File f = new File(docroot + File.separator + path);
 int length = (int)(f.length());
 if (length == 0) {
 throw new IOException("File length is zero: " + path);
 } else {
 FileInputStream fin = new FileInputStream(f);
 DataInputStream in = new DataInputStream(fin);
 byte[] bytecodes = new byte[length];
 in.readFully(bytecodes);
 return bytecodes;
* Main method to create the class server that reads
* files. This takes two command line arguments, the
* port on which the server accepts requests and the
* root of the path. To start up the server: 
* <code> java ClassFileServer <port> <path>
* </code> 
* <code> new ClassFileServer(port, docroot);
* </code>
public static void main(String args[])
 System.out.println(
 "USAGE: java ClassFileServer port docroot [TLS [true]]");
 System.out.println("");
 System.out.println(
 "If the third argument is TLS, it will start as\n" +
 "a TLS/SSL file server, otherwise, it will be\n" +
 "an ordinary file server. \n" +
 "If the fourth argument is true,it will require\n" +
 "client authentication as well.");
 int port = DefaultServerPort;
 String docroot = "";
 if (args.length >= 1) {
 port = Integer.parseInt(args[0]);
 if (args.length >= 2) {
 docroot = args[1];
 String type = "PlainSocket";
 if (args.length >= 3) {
 type = args[2];
 try {
 ServerSocketFactory ssf =
 ClassFileServer.getServerSocketFactory(type);
 ServerSocket ss = ssf.createServerSocket(port);
 if (args.length >= 4 && args[3].equals("true")) {
 ((SSLServerSocket)ss).setNeedClientAuth(true);
 new ClassFileServer(ss, docroot);
 } catch (IOException e) {
 System.out.println("Unable to start ClassServer: " +
 e.getMessage());
 e.printStackTrace();
private static ServerSocketFactory getServerSocketFactory(String type) {
 if (type.equals("TLS")) {
 SSLServerSocketFactory ssf = null;
 try {
 // set up key manager to do server authentication
 SSLContext ctx;
 KeyManagerFactory kmf;
 KeyStore ks;
 char[] passphrase = "passphrase".toCharArray();
 ctx = SSLContext.getInstance("TLS");
 kmf = KeyManagerFactory.getInstance("SunX509");
 ks = KeyStore.getInstance("JKS");
// ks.load(new FileInputStream("testkeys"), passphrase);
 ks.load(new FileInputStream("serverkey"), passphrase);
 kmf.init(ks, passphrase);
 ctx.init(kmf.getKeyManagers(), null, null);
 ssf = ctx.getServerSocketFactory();
 return ssf;
 } catch (Exception e) {
 e.printStackTrace();
 } else {
 return ServerSocketFactory.getDefault();
 return null;
Could anyone help ?
thanks in advance
Jayaprakash

The same thing.
I have found the place where the exception throws.
It is com.sun.net.ssl.internal.ssl.AVA class.
It has a constructor AVA(StringReader)
There is a check in this constructor of different certificate extensions
(if-else). If it sees no familiar extension it throws exception and handshake fails.
It is not difficult to fix this problem: just ignore unknown extension.
Everything works fine with this "improved" class (under VA 3.5).
But the problem is - the using of this class in applets.
How can I say the browser to use my "improved" class and not the one it downloaded with java plug-in?

Does JMS support reliable messaging (store-and-forward) for app clients?

I need to write an enterprise application client (launched with Java web start or packaged with a tool like Sun's package-appclient) that can send messages reliably from Linux to Windows. JMS seems like the obvious solution, so I deployed an EAR file with an MDB and an application client on a Windows machine (running SJSAS 9). I was able to download the client jar file onto Linux and send JMS messages successfully. However, if the Windows machine is not available, the Linux client immediately throws exceptions and fails. Are there any JMS providers that provide a store-and-forward mechanism for enterprise clients, so that if the remote server is not available immediately, messages are delivered later? (Note that the client can't be a servlet or other server-managed component.)
I'd prefer an open-source solution, but this requirement has an extremely high priority for my customer, so I'll use a commercial product if necessary. And if there's something other than JMS that works, that would be fine. (In my case, the messages on the remote side ultimately go to a .NET service, so WS-ReliableMessaging would be ideal, but it looks WS-RM won't be integrated into .NET until Vista, and the current WS-RM implementation is a beta, etc., etc.)
Thanks,
Mike

You could use Apache ActiveMQ
http://incubator.apache.org/activemq/
which supports embedded brokers inside each JVM which can be networked together in a store-forward mechanism so that each application keeps working and store-forwarding messages.
http://incubator.apache.org/activemq/networks-of-brokers.html
or you can use failover transport to handle automatic reconnection...
http://incubator.apache.org/activemq/how-can-i-support-auto-reconnection.html
If you need to communicate with some .Net you can use the NMS - the .Net Messaging API which has a client for ActiveMQ as well...
http://incubator.apache.org/activemq/nms.html
James
http://logicblaze.com/
Open Source SOA

Please! can anyone tell me if after I create a site with adobe muse, is there anyway for my client t

Please! can anyone tell me if after I create a site with adobe muse, is there anyway for my client to edit and update text and to a lesser extent images on the website?
I don't care if the client text/image editing and updating doesn't update in my Adobe Muse, as long as my client can update the text online.
Please help me answer this question, I have used adobe for decades (2) and am a print designer. I want to use Muse for websites but if my clients can't update text and images, I don't see how I can make it work.
If I have to use Business Catalist too; I don't care. I just want to be able to use this great software.
Sorry if I soud desperate but I'm holding on starting a website for a new client and need to get this answered first.

At the moment you can't using Muse's widgets, though you can insert html! So, you could have photo galleries linked to flickr that the client can update to, for example. I'm sure there are other options for slicker slideshows that can be updated client side!
For text, I'm too much of a novice, unless you were wanting a blog style: http://www.muse-themes.com/blogs/news/7257782-creating-a-blog-in-adobe-muse-powered-by-nab ble
Basically, I think you need to find the right html to embed for your purposes

How to manage one wsp and dll for multiple clients in farm environment

1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture.
• SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
• Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
• Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
In this scenario how to manage multiple versions of same wsp solution?
Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
thing is, how to manage dll files for individual client?

It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
Bluntly i don't think a single farm can manage all your user environments.

When a site asks for a client certificate, not all certificates are presented.

At www.pkiuniversity.com/sandbox/index.php, I am asked for a client certificate. I get to choose from a list of the certificates issued by startcom but not my own. The extended key usage does mark it for client authentication. The root certificate corresponding to the signing private key is also in the store. Why don't these certificates pop up. They do in Safari.

If you're interested, I get my certificate from
reloid.com/enrollments/cheapcerts3/getcert.php?email=[email protected]
This is designed to be a very insecure certificate with no chance of being added to the built-in cache.

DB2E for AWT client

Similar Messages

Maybe you are looking for