DB2E installation in PDA

HI all
I am working on SP15 Client and now I want u user DB2E .
I have a setup file of SP13 and I need to upgrade to SP15 by appling the patches of the client as ADDons ,
MY question is
after Installing SP13 client --> Apply DB2E patch first --->and then Apply patched for SP15 to the Client using web console will this work .
thanks in advance
bye
sam

Hi Sam,
Please upgrade to SP15 first and then deploy the DB2e addons through the client installer. The reason is that the deployment of the DB2e addons will make entries into the MobileEngine.config file, so you need the SP15 deployerd first.
Please also note that until SP13, the SAP DB2e certified version is 8.2. But from SP14 onwards, it is DB2e 8.2.1. So you may want to use the appropriate DB2e version with your SP15 client.
Best Regards,
Sandeep

Similar Messages

DB2e Installation Problem

Hi All,
          I am developing MI AWT application. I have installed MI AWT Client on my desktop PC. MI Client version installed on my system is MI 70 SP 9 Patch 0. Till now I have been working on File I/O. It was working fine. Now I want to use DB2e instead of file I/O. I have downloaded DB2e SDK Evaluation version. Extracted db2eV822.zip and made SDA out of it, deployed it on MI Server and given it as first ADDON to be downloaded in Desktop MI Client. When I synchronizes, DB2e installation start button is shown. When I press on "Start" button, installation fails. Following is the error message: "installation failed:Version check for application 'MOBILEENGINE_JSP' failed ; 'null' (installed version) greater_equal '2509' returned false (used prefixmatch)".
         Can anyone help me out of this problem? How can i now install this evaluation version of DB2e so that i can continue my development?
Thanks and Regards,
Gopal

Hi Siva,
            Thanks for your answer. That was great and installation was successful. After installing DB2e, I installed my application on mobile device. After successfully installing, when I ran the application from SAP Netweaver Studio, following error was seen in Console tab (and my application didn't ran):
java.lang.RuntimeException: com.ibm.db2e.jdbc.DB2eDriver
     at com.sap.ip.me.smartsync.core.SmartSyncRuntimeImpl.publishContextSwitch(SmartSyncRuntimeImpl.java:166)
     at com.sap.ip.me.smartsync.core.SmartSyncRuntimeImpl.enterNewConext(SmartSyncRuntimeImpl.java:190)
     at com.sap.ip.me.smartsync.core.SmartSyncRuntimeManager.changeContext(SmartSyncRuntimeManager.java:261)
     at com.sap.ip.me.smartsync.core.SmartSyncAdapterImpl.changeContext(SmartSyncAdapterImpl.java:96)
     at com.sap.ip.me.core.ApplicationManager.switchSmartSyncContext(ApplicationManager.java:902)
     at com.sap.ip.me.core.ApplicationManager.activateApplication(ApplicationManager.java:1136)
     at com.sap.ip.me.core.ApplicationManager.startApplication(ApplicationManager.java:392)
     at com.sap.ip.me.awtapps.home.HomeFrame.startApp(HomeFrame.java:2664)
     at com.sap.ip.me.awtapps.home.HomeFrame.action(HomeFrame.java:707)
     at java.awt.Component.handleEvent(Component.java:5341)
     at com.sap.ip.me.awtapps.home.HomeFrame.handleEvent(HomeFrame.java:1012)
     at java.awt.Window.postEvent(Window.java:1614)
     at java.awt.Component.postEvent(Component.java:3895)
     at java.awt.Component.postEvent(Component.java:3895)
     at java.awt.Component.postEvent(Component.java:3895)
     at java.awt.Component.dispatchEventImpl(Component.java:3631)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
      Can you help me out where am I going wrong?
Thanks and Regards,
Gopal

XMAM30 installation on PDA

Hi,
After i assigned the SAP xMAM on the Web Console, and when sync, the message displayed
Installation of: MAM30_HANDHELD_SR05 30.050; MAM30
Installation failed;
To complete installation restart your device
I restart the device and sync again, then message display on the device,
Deinstallation of: MAM30_HANDHELD-SR05 30.050 MAM30
To complete installation restart your device
I restart the device and sync again, the message,
Installation of: MAM30_HANDHELD_SR05 30.050; MAM30
Installation failed;
To complete installation restart your device
I restart the device and sync again, the message,
Deinstallation of: MAM30_HANDHELD-SR05 30.050 MAM30
To complete installation restart your device
I was following the 'xMAM30 installation guide'.
Please advise. Thanks

Dear kb,
Are you having enough space in your device? Post your trace file for more info. Have you added entries from WebConsole and removed entries in WebDynpro (delete from device) subsequently. Are you assigning (add entries) manually or by a customized role assignment? There might be a clash some where if you are having enough space in device. In general you will need atleast 20-30 mb free space for a minimal xMAM installation on PDA.
Please mark the question as answered if my or others' post solved your question.
Regards,
Veera
Edit:
If it was a port error, he would not have been able to synchronize at the first place. I feel it is something else.
Edited by: Veeraraagavan R on Feb 13, 2009 11:22 AM

Create installer for PDA 8.2

Hi Everyone,
I've developed a PDA 8.2 application that I need to distribute world wide to
field technicians for them to install on to PDA's purchased at their locations.
When building a PDA application, the only file that is created is an exe file which
will not run on a PDA without the Labview support files installed. Is there a
way to create a full installer that will install all files required to run a
PDA application including all of the Labview application files? This
functionality exists for PC applications.
Thanks,
John.

John:
The LabVIEW PDA Module only create executables, it cannot create installers. PDA executables and support files are simply files to be transferred to the PDA and do not need to be registered with the OS, thus any installer that can transfer the file in the right directory structure should suffice. No installer applications have officially been tested with the PDA Module, however you may try out a free program called EzSetup. It is a free utility designed to create installation applications for the PocketPC. You may also want to take a look at this knowledgebase, which highlights how to develop and deploy application for Pocket PCs.
I hope this helps and please let me know if I can help further.
Regards,
Rudi N

Signature Capture Software Installation on PDA

Hi,
In note: 897289 (Signature Capture Software Installation/Deployment), Using functionality on PDA point (6), the creme version is 3.27a.
How to edit the 'Register Plugin/Unregister Plugin' file after copy to desktop?
And in /windows/creme/bin, there isn't the 'cremePie.dll' file, where to get it?
Because when click on 'Regiter Plugin', the message "Loadlibrary("CremePie.dll") failed. GetLastError returns 7e.
Please advise.
Thanks

Hello Kb,
How to edit the 'Register Plugin/Unregister Plugin' file after copy to desktop?
Copy the files to desktop, right click ,select "send to" option and send it to either notepad or textpad. You should be able to edit this using notepad or textpad.
And in /windows/creme/bin, there isn't the 'cremePie.dll' file, where to get it?
Cremepie.dll will be in /windows/creme/bin. If it is not there,then creme installation is not successful. Try reinstalling the the creme again and after installing the creme, perform a soft reset of the device so that all the Dll's are loaded .
Regards,
Suma

DB2e installation on device ?

Hi Experts,
I have downloaded the file for database support -db2eV822.zip
currently I am using Microsoft Pocket PC emulator 2003.
I am not clear with the steps provided in the SAP Help for installation.
Can someone guide me the steps for how to install the database on the mobile device.
Valuable suggestions are appreciated.
Regards,
sandeep

Hi Sandeep,
The steps to install DB2e are as follows:
1. Upload your file to the Web Console.
2. Assign it to "all devices" on which DB2e is supposed to be installed - in your case you can just assign it to the PPC Emulator.
3. Synchonize your device.
4. Once the synchronization is completed a popup appears.
5. Press the Start button on the Client Installer user interface and wait until the installation is finished. This might take a while.
6. Click exit to quit the installer. No restart is required.
So basically all you need to do is to upload the file to the Webconsole, assign it to the device and synchronize to install the DB2e on the device. Make sure that you install DB2e before installing any application. If you install for example MAM and a DB2e is already installed the app automatically detects DB2e and uses it for persistence.
Hope this helps,
Karsten

Flash Player Silent Installation on PDA

Tryin to deploy the Flash Player on thousands Pocket PCs and
get annoyed by the Licensing pop-up.
Is there any possibilities to launch the installation in a
silent mode or does Adobe have an *.exe for installation instead of
a cab ????
Thanks a lot

Yes, this is an intentional change made by Microsoft. Here's a FAQ that gives a high level overview.
How do I install Flash Player on Windows 8?

ME 2.1 Client Installation on PDA?

Hi,
For ME Client Installation do I need all or a few of these files:
cabbuilder_en.zip
CrEmeXXXX File
ME21Tom_en.CAB
And in which order do I need to install them?
Thnx
Meesum

HI Meesum,
afaik the cabbuilder is only needed for crEme 325 and up because these versions only come with a 90day test license. To obtain a regular license you have to get in contact with the vendor of crEme, get a (free for SAP customers) permanent license and rebuild the crEme installation CAB with the new license file using the cabbuilder.
If you are either using crEme 324 or don't care about the test licence expiration you would not need to use the cabbuilder.
You will definitely need the other two files. In the instguide To ME2.1 SP03 it is recommended that you first install the mobile engine and afterwards the crEme VM. Even though this sounded a bit odd to me, it worked fine.
Best regards,
Tim
ps. See SAP note 720224 together with the related notes for your convenience
Message was edited by: Portal Systems

J9 JVM: installation on PDA failed

HI!
I have the following PDA HP iPaq 5550, and I run the .exe file from the PC and choose the automatic installing on the device. It says it has all been well installed.
But when I run the j9.exe file in the PDA, the following error appears on the jvm console:
(W) J9VM0011 Unable to load jclfoun10_22: The specified module could'nt be found.
(E) EXEX0013 Internal VM error: Failed to create Java VM
(I) EXEX0014 Run \J9\PPRO10\bin\j9.exe -help for usage
What can I do to solve it?
Thanks in advance!!
If you could also answer to the following address I would be grateful!!
[email protected]
Thanks again!!!

hehe,...same problem with me,...i've install it on my ipaq h5550 too..but it wont work to run any of my midlets,...

Installer for LV PDA

Hi!,
I created installer for PDA application using Build application wizard provided by LAbVIEW. Seems like that the exe created by the installer is not a valid pocket PC application.
Has anyone tried to distribute their application for PDA and how was the installer created? I think I'll have to use msi or any other application to create installer, are there any recomended application to be used which will not conflict with LV.
TIA
Rachana

Rachana,
The LabVIEW PDA Module only creates executables; it cannot create installers. What process are you using to create your executable? When targeted to the PDA device you can either click on the run button or select Tools >> Build for PDA. Are you perhaps trying to use the Application Builder instead? What version of the module do you have, and what PDA do you have? Is it a Palm or PocketPC 2002 or 2003?
If none of these suggestions help, or if I’m not correctly understanding your issue, please reply with comments or answers to the discussion above and any additional information that may help, and I’ll be happy to look further into it.
Have a nice day!
Robert Mortensen
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

Installation problem with PDA

Hi everyone
I developed a game and able to install that jar file in cell phone but not able to install in PDA. Can anyone tell me what will be reason and what i have to do to solve this problem??
thanks in advance
Edited by: try.test.abc on Oct 14, 2007 10:19 PM

Hi
The user profile for MAM is irrespective whether you are using the application on PDA or Laptop. The same user profile should work on both devices. For MAM25, the installation for PDA and Laptop is the same file and are not different. For MAM30 its different. Just check transaction merep_mon for the mobile id and see if you can make out any difference or errors. Or may be due to Asynchronous processing of Sync BOs, data may come down to the client after all the processing is done in the server.
Best Regards
Sivakumar

PDA Coldboot whit Creme 328

Hi all,
we are trying to do a Coldboot in the device Intermec CN3 using SAP MI 25 SP 18 Client and JVM Creme 'CrEme328 ARM CE50 PPC'.
The first step was using the manufacturer jar file 'Device.jar', we instance in the servlet, a object of the class:
import com.intermec.device.*;
Power.warmboot(); // warm boot CN3
and then, we added the path in file 'creme_listOfJars.txt' :
-classpath 'SD CardMIwebappsMAM25_ECLIPSEWEB-INFlibDevice.jar;
This procedure didn´t reboot the device, and no messages of error were displayed.
The next step, we decide use a JNI call using a manufacturer DLL ''CN3ColdResetJNI_DLL.dll', in the servlet, we load the 'dll' file
and call the function to coldboot:
System.loadLibrary("CN3ColdResetJNI_DLL.dll");
DoColdBoot();
We tried put the dll in differents locations, calling with complete path, without extension, etc. and didn´t work, and no
messages were displayed.
Have anybody any idea about this issue, or know another case, with the same problem?
Support Creme JNI methods inside Tomcat?
Regards.

Hi,
why do you put a JAR file into the listofjars file, that is basically inside MAM? Why do you not put it inside the LIB folder of MI then? Can be downloaded as an AddOn in this case.
Jni is supported in Creme. So this should work fine a swell.
So: why is a restart necessary for you? MI has the option do do that after downloading new add ons. You just need to describe that in the deployment descriptor for the installation toolkit. While you have installed MAM - you should use DB2e - the DB2e installer does a restart of MI after its installation. Look into the XML file there and you will find the correct values.
Regards,
Oliver

Oracle on pda

Is there oracle database available to be installation on pda ?
If so, which is the download link.
Thanks

There are three components to the product:
1. Mobile Server installs on NT/2000/XP or UNIX
2. Mobile Client for Win32/CE, PalmOS, Symbian
3. Mobile Development Kit installs on your Windows system
Depends on what you need.
1. Just a small database
Install MDK from CD-ROM and your IDE of choice i.e Visual Studio to build a small database application
2. Date synchronization
Install Mobile Server from the CD-ROM. You need an up and running Oracle Database 8.1.7 or higher to install Mobile Server. Then you have to follow a few steps to package the appliation into a JAR file, publish the JAR file into the Mobile Server, provision the application to mobile user, installe Mobile Client (libraries) over the Internet, and finally sync data and application to the mobile device

Tomcat server add on the device

Hi Folks,
Can anyone tell me the exact location of the jscpout.txt file so that i can check
whether the Tomcat server add on has been successfully installed or not.
Can you please clarify :
I have downloaded the tomcat addon from the sapnote 1009703 but it is a zipfile.
I am looking for the file MAP70_WinCESetupTomcat_Tomcat.CAB file.
Though i have copied the add on to the device using Active sync.
The client installer has been created on my pc and again i try to
find the tomcat cab file but i can see only the txt file.
Can you suggest how to get the tomcat cab file and how to run on the device.
And the location of the jscpout.txt file so that i can check the tomcat
installation successful or not.
Thanks,
Aswini

Hi Aswini
The jscpout.txt file is present in the root folder of the PDA (i.e directly under \ ). The tomcat addon that is attached to note 1009703 will only be zip fie and not a cab file since this needs to be installed only after you have successfully installed MAP70_WinCESetupTomcat_Tomcat.CAB which is nothing but the MI JSP client installer for PDA. So the steps are as below
1. Install Creme JVM (Creme 3.27A)
2. Install MAP70_WinCESetupTomcat_Tomcat.CAB.
3. Sync to obtain a device id.
4. Upload and assign tomcat addon to the device. The steps for this is mentioned in note 1009703 itself.
Hope this helps.
Best Regards
Sivakumar

Encrypted DB2E 8.2.1a on PDA WM2003SE

Hi all,
I am trying to install the encrypted db2e version 8.2.1a (which is recommended by SAP) on a PDA with Windows Mobile 2003 SE with SAP MI 2.5 SP 18.
This is not working. It is downloaded, the client installer pops up and when I press start the following message is displayed: "installation failed: Version check for ap...".
I have also tested this DB2E on the laptop, with Windows XP and SAP MI 2.5 SP 18. On the laptop it works.
Does anyone know why this DB2E 8.2.1a is not working on my PDA?
Thanks in advance,
Bart Elshout

Hi Bart Elshout
There was a change in the DB2e archive for 8.2.1a shipped by SAP. Earlier, if you open the install.xml which is present in the DB2e archive, you would notice an entry called "MOBILEENGINE_JSP". This entry created a problem in installation in MI AWT Client and installation failed on AWT. Hence inorder to resolve this issue, the latest release of 8.2.1a contains an entry called "%MI_FRAMEWORK%" instead of "MOBILEENGINE_JSP". This change is done to dynamically detect the whether the MI client framework is AWT or JSP. Hence to resolve this issue you have to install SP18 Patch 02 ( Note no.982495).
Steps for solution:
1. Assign and install SP18 Patch02 to the client
2. Once installation of Patch02 is successful, assign and install DB2e 8.2.1a archive.
Do let me know if this resolves your problem.
Best Regards
Sivakumar

DB2E installation in PDA

Similar Messages

Maybe you are looking for