DB6 - Log files accidentally deleted - How to recreate them?
Hello community,
we found that all DB2 log files of a Solution Manager were manually deleted. The instance was down for some time, so we did not realize the problem immediately, but only now on the restart
We are able to start DB2, but SAP can't connect and this error is reported in the log from the R3trans -d
An I/O error occurred while accessing the database STATE=58030
In the db2diag there are a lot of errors related to missing log file:
RETCODE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
DIA8411C A file "S0000016.LOG" could not be found.
There is a procedure to recreate the DB2 log files?
Best Regards,
Valerio
Hi Valerio,
Without the log files the db does not know what transactions are open and hwat state it is in.
The logs cannot be just recreated.
Do you have any possibility to recover the logs? Could they have been moved to another location or were they completey deleted? Do you have a log mirror path set?
If deleted then you could either restore from your last good backup and restore to the last point where you have logs or you will need to open a message to ask assistance in solving this.
Regards,
Paul
Similar Messages
-
Redo log files are deleted, how to recover the database
Hi All,
I removed the redo01.log, redo02.log and redo03.log files of our Oracle database. And it caused the db to fail. Is there any way I can recover the database and startup database in normal mode? I do not need it to have all the latest data restored, I will be happy to just start the db and get going.
database is in arcive log mode.
ThanksHello,
You may try this if the database is mounted:
recover database until cancel;
cancel
alter database open resetlogs;Hope it can help.
Best regards,
Jean-Valentin -
Cannot connect to database because log file is deleted
Greetings,
I just recently cleaned up some junk files from my PC and didn't realize that an oracle log file got deleted. Therefore when I try to connect to the database I got the following error:
ORA-01033: ORACLE initialization or shutdown in progress
From sql plus, I try to shutdown and startup the database so that I know what kind of file that got deleted. So, how can I fix the problem?
regards,
valerie
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 18 11:46:46 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> startup
ORA-01031: insufficient privileges
SQL> connect firefly
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SQL> connect sys/manager as sysdba
Connected.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 92278708 bytes
Database Buffers 50331648 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1:
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL>Hi Hermant,
I'm not sure if it in archivelog mode or not. The following is the content of alert_xe:
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 10:53:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:698M/990M, Ph+PgF:1306M/1621M, VA:1945M/2047M
Fri Sep 18 10:53:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=4052
PSP0 started with pid=3, OS id=4048
MMAN started with pid=4, OS id=3220
DBW0 started with pid=5, OS id=3568
LGWR started with pid=6, OS id=3292
CKPT started with pid=7, OS id=3868
SMON started with pid=8, OS id=4004
RECO started with pid=9, OS id=3140
CJQ0 started with pid=10, OS id=2484
MMON started with pid=11, OS id=2840
MMNL started with pid=12, OS id=3348
Fri Sep 18 10:53:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 10:53:19 2009
alter database mount exclusive
Fri Sep 18 10:53:24 2009
Setting recovery target incarnation to 2
Fri Sep 18 10:53:25 2009
Successful mount of redo thread 1, with mount id 2578987615
Fri Sep 18 10:53:25 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 10:53:25 2009
alter database open
Fri Sep 18 10:53:27 2009
Beginning crash recovery of 1 threads
Fri Sep 18 10:53:28 2009
Started redo scan
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 10:53:28 2009
Aborting crash recovery due to error 313
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 10:53:33 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:08:24 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Sep 18 11:16:12 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:20:11 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:647M/990M, Ph+PgF:1346M/1621M, VA:1945M/2047M
Fri Sep 18 11:20:11 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2696
PSP0 started with pid=3, OS id=2700
MMAN started with pid=4, OS id=2704
DBW0 started with pid=5, OS id=2708
LGWR started with pid=6, OS id=2712
CKPT started with pid=7, OS id=2716
SMON started with pid=8, OS id=2720
RECO started with pid=9, OS id=2724
CJQ0 started with pid=10, OS id=2728
MMON started with pid=11, OS id=2732
MMNL started with pid=12, OS id=2736
Fri Sep 18 11:20:11 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:20:20 2009
alter database mount exclusive
Fri Sep 18 11:20:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:20:27 2009
Successful mount of redo thread 1, with mount id 2579045300
Fri Sep 18 11:20:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:20:29 2009
alter database open
Fri Sep 18 11:20:32 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:20:33 2009
Started redo scan
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:20:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:20:39 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:31:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:673M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:31:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2740
PSP0 started with pid=3, OS id=2744
MMAN started with pid=4, OS id=2752
DBW0 started with pid=5, OS id=2756
LGWR started with pid=6, OS id=2760
CKPT started with pid=7, OS id=2764
SMON started with pid=8, OS id=2768
RECO started with pid=9, OS id=2772
CJQ0 started with pid=10, OS id=2776
MMON started with pid=11, OS id=2780
MMNL started with pid=12, OS id=2784
Fri Sep 18 11:31:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:31:21 2009
alter database mount exclusive
Fri Sep 18 11:31:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:31:27 2009
Successful mount of redo thread 1, with mount id 2579028809
Fri Sep 18 11:31:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:31:27 2009
alter database open
Fri Sep 18 11:31:28 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:31:28 2009
Started redo scan
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:31:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:31:34 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:40:56 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:656M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:40:56 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2612
PSP0 started with pid=3, OS id=2616
MMAN started with pid=4, OS id=2624
DBW0 started with pid=5, OS id=2628
LGWR started with pid=6, OS id=2632
CKPT started with pid=7, OS id=2636
SMON started with pid=8, OS id=2640
RECO started with pid=9, OS id=2644
CJQ0 started with pid=10, OS id=2648
MMON started with pid=11, OS id=2652
MMNL started with pid=12, OS id=2656
Fri Sep 18 11:40:57 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:40:59 2009
alter database mount exclusive
Fri Sep 18 11:41:04 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:41:05 2009
Successful mount of redo thread 1, with mount id 2579051403
Fri Sep 18 11:41:05 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:41:05 2009
alter database open
Fri Sep 18 11:41:06 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:41:07 2009
Started redo scan
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:41:07 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:41:11 2009
Starting ORACLE instance (normal)
Shutting down instance: further logons disabled
Fri Sep 18 11:43:19 2009
Stopping background process CJQ0
Fri Sep 18 11:43:19 2009
Stopping background process MMNL
Fri Sep 18 11:43:19 2009
Stopping background process MMON
Fri Sep 18 11:43:19 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:43:19 2009
Stopping Job queue slave processes
Fri Sep 18 11:43:19 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Fri Sep 18 11:43:20 2009
alter database close normal
ORA-1109 signalled during: alter database close normal...
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:43:27 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:708M/990M, Ph+PgF:1375M/1621M, VA:1945M/2047M
Fri Sep 18 11:43:27 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=3168
PSP0 started with pid=3, OS id=3172
MMAN started with pid=4, OS id=3176
DBW0 started with pid=5, OS id=3180
LGWR started with pid=6, OS id=3184
CKPT started with pid=7, OS id=3188
SMON started with pid=8, OS id=3192
RECO started with pid=9, OS id=3196
CJQ0 started with pid=10, OS id=3200
MMON started with pid=11, OS id=3204
MMNL started with pid=12, OS id=3208
Fri Sep 18 11:43:28 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:43:28 2009
alter database mount exclusive
Fri Sep 18 11:43:32 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:43:32 2009
Successful mount of redo thread 1, with mount id 2579057184
Fri Sep 18 11:43:32 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:43:33 2009
alter database open
Fri Sep 18 11:43:34 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:43:34 2009
Started redo scan
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:43:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:43:38 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:47:55 2009
Shutting down instance: further logons disabled
Fri Sep 18 11:47:55 2009
Stopping background process CJQ0
Fri Sep 18 11:47:55 2009
Stopping background process MMNL
Fri Sep 18 11:47:55 2009
Stopping background process MMON
Fri Sep 18 11:47:55 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:47:55 2009
Stopping Job queue slave processes
Fri Sep 18 11:47:55 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S001' to die
All dispatchers and shared servers shutdown
Fri Sep 18 11:47:56 2009
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Fri Sep 18 11:47:56 2009
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Sep 18 11:48:23 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=3628
PSP0 started with pid=3, OS id=3632
MMAN started with pid=4, OS id=3636
DBW0 started with pid=5, OS id=3640
LGWR started with pid=6, OS id=3644
CKPT started with pid=7, OS id=3648
SMON started with pid=8, OS id=3652
RECO started with pid=9, OS id=3656
CJQ0 started with pid=10, OS id=3660
MMON started with pid=11, OS id=3664
MMNL started with pid=12, OS id=3668
Fri Sep 18 11:48:24 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:48:24 2009
ALTER DATABASE MOUNT
Fri Sep 18 11:48:29 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:48:29 2009
Successful mount of redo thread 1, with mount id 2579048520
Fri Sep 18 11:48:29 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Sep 18 11:48:29 2009
ALTER DATABASE OPEN
Fri Sep 18 11:48:29 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:48:29 2009
Started redo scan
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:48:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: ALTER DATABASE OPEN...
Fri Sep 18 11:53:41 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup. -
HT201272 i need to re download a song that i purchased and accidentally deleted. how?
i need to download a song that i accidentally deleted. how do i do that?
Yes, it tells you exactly how to do this:
Open iTunes. (You can download the latest version of iTunes.)
If you're not already signed in, choose Store > Sign In and type your Apple ID and password.
If you're in the iTunes Store, click the Library button, in the upper-right corner, to go to your library.
Make sure that you have "Show iTunes in the Cloud Purchases" enabled in your iTunes preferences by going to iTunes > Preferences in the Store tab and clicking OK.
In your iTunes library, click the content type you wish to download using the content selector in the upper-left. Choose Music to download music, Movies to download movies, and so on.
Locate the item or title you wish to download.
Click the download icon to download that item.
Note: The download icon for previously purchased movies is located to the right of the movie title. To download previously purchased apps and books, you'll need to navigate to the Purchased page under the Quick Links section in the iTunes Store. For more information, follow the steps outlined below for iTunes 10.7 or earlier." -
What log files can delete in RAC?
Hi,
I have a little question, what log files can delete?
$ORA_CRS_HOME/log/hostname/client ?
And what others?
MiguelSome logs are automatically purged and some not: see http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/appsupport.htm#BEHJHGJD.
Trace files (.trc) that can be created in same directories are not purged automatically. -
I have ipad3, but all my files where deleted, can I restore them?
I have ipad3, but all my files where deleted, can I restore them?
Without a backup you can download the apps again for free, but only if you have a backup you can get back your settings and other data if you restore from that backup.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
iOS: How to back up -
How to recover the database when some of the archive log file get deleted.
I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AMHi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss. -
NXT files (once deleted how to recover?)
Hi,
I am using the brick from LEGO Mindstorms NXT 2.0
I accidentally deleted the file RedData.dat from my NXT, and I need that for one of my programs.
Even when I tell the program to "write to red data file", it does not recreate the file, so I'm left with no data to show.
I am using all three data files, so I cannot simply just switch to another one.
I have also tried telling the NXT to create a new file when it runs the program, called RedData.dat.
What happens when I do this is that I get erratic results. Instead of a nice curve, I get lines that jump all over the place.
I am programming the NXT with NI LabVIEW 2009. The place where I deleted RedData.dat is from the NXT Terminal.
I view the data using the Data Viewer.
Also, I am trying to log motor rotations.
Thanks for your help.
Solved!
Go to Solution.dluu wrote:
Hi,
I am using the brick from LEGO Mindstorms NXT 2.0
I accidentally deleted the file RedData.dat from my NXT, and I need that for one of my programs.
Even when I tell the program to "write to red data file", it does not recreate the file, so I'm left with no data to show.
I am using all three data files, so I cannot simply just switch to another one.
I have also tried telling the NXT to create a new file when it runs the program, called RedData.dat.
What happens when I do this is that I get erratic results. Instead of a nice curve, I get lines that jump all over the place.
I am programming the NXT with NI LabVIEW 2009. The place where I deleted RedData.dat is from the NXT Terminal.
I view the data using the Data Viewer.
Also, I am trying to log motor rotations.
Thanks for your help.
Do you have the NXT tethered? What happens if you run the code the opposite way? (i.e. if it's tethered, download the code directly and run, if it isn't, try tethering it)
Also, have you made sure to update the firmware on the NXT? What is its version? -
TGW on Linux - log files not deleting
I have been running TGW 3.5 for a few months on Linux and noticed the disk space is full. It seems the TGW logs are not clearing out. I have had to manually delete loads of log files.
From the logs there seems to be a process which checks how long the logs have been there but for some reason not deleting them.By design TGW doesn't clear out old log files thinking that it would help in troubleshooting. But we are planning to enhance it by clearing log files older than x number of days..
As you mentioned, the current fix is to manually clear out old log files. How often do you have to clear the logs ? Probably increasing available diskspace may help reduce iterations for cleaning up old logs ... -
Empty Log files not deleted by Cleaner
Hi,
we have a NoSql database installed on 3 nodes with a replication factor of 3 (see exact topology below).
We run a test which consisted in the following operations repeated in a loop : store a LOB, read it , delete it.
store.putLOB(key, new ByteArrayInputStream(source),Durability.COMMIT_SYNC, 5, TimeUnit.SECONDS);
store.getLOB(key,Consistency.NONE_REQUIRED, 5, TimeUnit.SECONDS);
store.deleteLOB(key, Durability.COMMIT_SYNC, 5, TimeUnit.SECONDS);
During the test the space occupied by the database continues to grow !!
Cleaner threads are running but logs these warnings:
2015-02-03 14:32:58.936 UTC WARNING [rg3-rn2] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.937 UTC WARNING [rg3-rn2] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:32:58.920 UTC WARNING [rg3-rn1] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.921 UTC WARNING [rg3-rn1] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:32:58.908 UTC WARNING [rg3-rn3] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.909 UTC WARNING [rg3-rn3] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:33:31.704 UTC INFO [rg3-rn2] JE: Chose lowest utilized file for cleaning. fileChosen: 0xc (adjustment disabled) totalUtilization: 1 bestFileUtilization: 0 isProbe: false
2015-02-03 14:33:32.137 UTC INFO [rg3-rn2] JE: CleanerRun 13 ends on file 0xc probe=false invokedFromDaemon=true finished=true fileDeleted=false nEntriesRead=1129 nINsObsolete=64 nINsCleaned=2 nINsDead=0 nINsMigrated=2 nBINDeltasObsolete=2 nBINDeltasCleaned=0 nBINDeltasDead=0 nBINDeltasMigrated=0 nLNsObsolete=971 nLNsCleaned=88 nLNsDead=0 nLNsMigrated=88 nLNsMarked=0 nLNQueueHits=73 nLNsLocked=0 logSummary=<CleanerLogSummary endFileNumAtLastAdjustment="0xe" initialAdjustments="5" recentLNSizesAndCounts=""> inSummary=<INSummary totalINCount="68" totalINSize="7570" totalBINDeltaCount="2" totalBINDeltaSize="254" obsoleteINCount="66" obsoleteINSize="7029" obsoleteBINDeltaCount="2" obsoleteBINDeltaSize="254"/> estFileSummary=<summary totalCount="2072" totalSize="13069531" totalINCount="68" totalINSize="7570" totalLNCount="1059" totalLNSize="13024352" maxLNSize="102482" obsoleteINCount="66" obsoleteLNCount="971" obsoleteLNSize="12974449" obsoleteLNSizeCounted="971" getObsoleteSize="13019405" getObsoleteINSize="7347" getObsoleteLNSize="12974449" getMaxObsoleteSize="13019405" getMaxObsoleteLNSize="12974449" getAvgObsoleteLNSizeNotCounted="NaN"/> recalcFileSummary=<summary totalCount="2072" totalSize="13069531" totalINCount="68" totalINSize="7570" totalLNCount="1059" totalLNSize="13024352" maxLNSize="0" obsoleteINCount="66" obsoleteLNCount="971" obsoleteLNSize="12974449" obsoleteLNSizeCounted="971" getObsoleteSize="13019405" getObsoleteINSize="7347" getObsoleteLNSize="12974449" getMaxObsoleteSize="13019405" getMaxObsoleteLNSize="12974449" getAvgObsoleteLNSizeNotCounted="NaN"/> lnSizeCorrection=NaN newLnSizeCorrection=NaN estimatedUtilization=0 correctedUtilization=0 recalcUtilization=0 correctionRejected=false
Log files are not delete even if empty as seen using DBSpace utility:
Space -h /mam2g/data/sn1/u01/rg2-rn1/env/ib/kvstore.jar com.sleepycat.je.util.Db
File Size (KB) % Used
00000000 12743 0
00000001 12785 0
00000002 12725 0
00000003 12719 0
00000004 12703 0
00000005 12751 0
00000006 12795 0
00000007 12725 0
00000008 12752 0
00000009 12720 0
0000000a 12723 0
0000000b 12764 0
0000000c 12715 0
0000000d 12799 0
0000000e 12724 1
0000000f 5717 0
TOTALS 196867 0
Here is the configured topology:
kv-> show topology
store=MMS-KVstore numPartitions=90 sequence=106
zn: id=zn1 name=MAMHA repFactor=3 type=PRIMARY
sn=[sn1] zn:[id=zn1 name=MAMHA] 192.168.144.11:5000 capacity=3 RUNNING
[rg1-rn1] RUNNING
single-op avg latency=4.414467 ms multi-op avg latency=0.0 ms
[rg2-rn1] RUNNING
single-op avg latency=1.5962526 ms multi-op avg latency=0.0 ms
[rg3-rn1] RUNNING
single-op avg latency=1.3068943 ms multi-op avg latency=0.0 ms
sn=[sn2] zn:[id=zn1 name=MAMHA] 192.168.144.12:6000 capacity=3 RUNNING
[rg1-rn2] RUNNING
single-op avg latency=1.5670061 ms multi-op avg latency=0.0 ms
[rg2-rn2] RUNNING
single-op avg latency=8.637241 ms multi-op avg latency=0.0 ms
[rg3-rn2] RUNNING
single-op avg latency=1.370075 ms multi-op avg latency=0.0 ms
sn=[sn3] zn:[id=zn1 name=MAMHA] 192.168.144.35:7000 capacity=3 RUNNING
[rg1-rn3] RUNNING
single-op avg latency=1.4707285 ms multi-op avg latency=0.0 ms
[rg2-rn3] RUNNING
single-op avg latency=1.5334034 ms multi-op avg latency=0.0 ms
[rg3-rn3] RUNNING
single-op avg latency=9.05199 ms multi-op avg latency=0.0 ms
shard=[rg1] num partitions=30
[rg1-rn1] sn=sn1
[rg1-rn2] sn=sn2
[rg1-rn3] sn=sn3
shard=[rg2] num partitions=30
[rg2-rn1] sn=sn1
[rg2-rn2] sn=sn2
[rg2-rn3] sn=sn3
shard=[rg3] num partitions=30
[rg3-rn1] sn=sn1
[rg3-rn2] sn=sn2
[rg3-rn3] sn=sn3
Why empty files are not delete by cleaner? Why empty log files are protected by replicas if all the replicas seam to be aligned with the master ?
java -jar /mam2g/kv-3.2.5/lib/kvstore.jar ping -host 192.168.144.11 -port 5000
Pinging components of store MMS-KVstore based upon topology sequence #106
Time: 2015-02-03 13:44:57 UTC
MMS-KVstore comprises 90 partitions and 3 Storage Nodes
Storage Node [sn1] on 192.168.144.11:5000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg1-rn1] Status: RUNNING,MASTER at sequence number: 24,413 haPort: 5011
Rep Node [rg2-rn1] Status: RUNNING,REPLICA at sequence number: 13,277 haPort: 5012
Rep Node [rg3-rn1] Status: RUNNING,REPLICA at sequence number: 12,829 haPort: 5013
Storage Node [sn2] on 192.168.144.12:6000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg3-rn2] Status: RUNNING,REPLICA at sequence number: 12,829 haPort: 6013
Rep Node [rg2-rn2] Status: RUNNING,MASTER at sequence number: 13,277 haPort: 6012
Rep Node [rg1-rn2] Status: RUNNING,REPLICA at sequence number: 24,413 haPort: 6011
Storage Node [sn3] on 192.168.144.35:7000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg1-rn3] Status: RUNNING,REPLICA at sequence number: 24,413 haPort: 7011
Rep Node [rg2-rn3] Status: RUNNING,REPLICA at sequence number: 13,277 haPort: 7012
Rep Node [rg3-rn3] Status: RUNNING,MASTER at sequence number: 12,829 haPort: 7013Solved setting a non documented parameter " je.rep.minRetainedVLSNs"
The solution is described in NoSql forum: Store cleaning policy -
May [date]IMAPMailboxSyncEngine.log files be deleted without losing emails?
Problem description:
[date]IMAPMailboxSyncServices.log makes large logs almost every day. May the log files with older dates be deleted w/o affecting the email files?
EtreCheck version: 2.2 (132)
Report generated 4/26/15, 8:50 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 448 - SN = D86130303H6DGDLAG
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
Color LCD 1680 x 1050
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 1:48:27
Disk Information: ℹ️
M4-CT512M4SSD2 disk0 : (512.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SSD 512 (disk1) / [Startup]: 510.88 GB (10.86 GB free) (Low!)
Core Storage: disk0s2 511.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
SanDisk ImageMate 8 in 1
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.netbridge (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.usbconnect (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.vnic (10.2.0 28956 - SDK 10.7) [Click for support]
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Click for support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Click for support]
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) [Click for support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) [Click for support]
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) [Click for support]
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) [Click for support]
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) [Click for support]
/System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.epson.epw.agent.plist [Click for support]
[failed] com.epson.eventmanager.agent.plist [Click for support] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[running] com.logmein.logmeingui.plist [Click for support]
[not loaded] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[failed] com.opendns.osx.DNSCryptMenuBar.plist [Click for support] [Click for details]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[not loaded] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.opendns.osx.DNSCryptConfigUpdater.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] org.cindori.AuthHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[running] com.nds.pcshow.plist [Click for support]
[loaded] com.nds.pcshow.uninstall.plist [Click for support]
[running] com.parallels.mobile.startgui.launchagent.plist [Click for support]
[loaded] uk.co.markallan.clamxav.clamscan.plist [Click for support]
[loaded] uk.co.markallan.clamxav.freshclam.plist [Click for support]
User Login Items: ℹ️
Garmin Lifetime Map Updater Application (/Applications/Garmin Lifetime Map Updater.app)
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
ClipMenu Application (/Applications/ClipMenu.app)
ClamXav Sentry UNKNOWN (missing value)
TuneupMyMac UNKNOWN (missing value)
ClamXav Application (/Applications/ClamXav.app)
ClamXav Sentry Application (/Applications/ClamXav.app/Contents/Resources/ClamXav Sentry.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
LogitechDeviceDetection: Version: 1.0.0.76 - SDK 10.7 [Click for support]
LogMeInSafari64: Version: 1.0.730 [Click for support]
o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.730 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.730 [Click for support]
googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.13 [Click for support]
CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Click for support]
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 [Click for support]
SharePointBrowserPlugin: Version: Unknown
DirectorShockwave: Version: 12.1.2r152 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
Searchme Adware! [Click to remove]
Slick Savings Adware! [Click to remove]
Amazon Shopping Assistant Adware! [Click to remove]
Ebay Shopping Assistant Adware! [Click to remove]
3rd Party Preference Panes: ℹ️
DNSCrypt [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Growl [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Destinations:
Alvin Lundgren's Time Capsu [Network]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
13% WindowServer
3% iPhoto
2% Google Chrome Helper(40)
2% com.apple.WebKit.Plugin.64
2% Mail
Top Processes by Memory: ℹ️
1.92 GB Google Chrome Helper(40)
737 MB kernel_task
295 MB clamd
270 MB Disk Inventory X
262 MB com.apple.WebKit.WebContent(5)
Virtual Memory Information: ℹ️
55 MB Free RAM
7.94 GB Used RAM
40 MB Swap Used
Diagnostics Information: ℹ️
Apr 26, 2015, 07:13:08 PM /Library/Logs/DiagnosticReports/Finder_2015-04-26-191308_[redacted].cpu_resourc e.diag [Click for details]
Apr 26, 2015, 07:02:09 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DNSCrypt-Menubar_2015-04-26-19 0209_[redacted].crash
Apr 26, 2015, 07:00:45 PM Self test - passed
Apr 25, 2015, 06:58:38 AM /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-04-25-065838_ [redacted].crashWhen you have a question, it's best just to ask, without posting reams of irrelevant information that no one asked for, especially if it comes from "etrecheck."
From the Mail menu bar, select
Window ▹ Connection Doctor
In the window that opens, uncheck the box marked
Log Connection Activity -
HT1338 can I recover a file accidentally deleted
Can I recover files I trashed and deleted
Mikija wrote:
Yep, I've looing for the same program for a very long time. Recently I find a useful tool from Google. It is an iPhone deleted or lost file recovery program called Wondershare Data Recovery for iTunes, which could help you recovering yor accidentally deleted files with ease. The recoverable files including contacts, photos, videos, messages, notes and more. I hope this program could help you more or less.
For more, please visit here:http://www.wondershare.com/data-recovery-mac/itunes-data-recovery.html
I aciedently deleted files from the trash can, is there any way for me to recover those files?
MacBook Pro, Mac OS X 10.9 (Mavericks) -
My all voice memos are deleted,how to retrieve them
my all voice memos are deleted after syncing it with itunes...how to retrieve them ??
Thanks Bro. I have backup. and I did the same thing twice but only 26 contacts appear on the device. Now again yesterday after your suggestion again I restored the device but the result was same. Then I thought a new thing. I restored the device one more time but after restoring I didn't configure the icloud account. Surprisingly all my old contacts are there in the device but those 26 contacts are not there. Now I will tell you how this must have happened? I had 3gs earlier. that was stolen 3 months ago. I put the device in lost mode. I purchased new iphone4. I restored with itune. All my data came back. After that I saved these 26 new contacts to my device which also saved in icloud but when I tried to backup on my pc it was not happening. the messege coming device disconnected. 2 days back my stolen device came online. Lost mode was activated by icloud. But what I think in between that time the other fellow must have deleted the phone contacts. And as per icloud also deleted the same. Only the 26 contacts which I saved in these 3 months remained in icloud. Now bro can u help me out? What I should do? I have 26 contacts in icloud and < 500 in my device. I don't understand when all other Co's mobile you can import contacts from any backup file iphone can not. This is the DRAWBACK OF IPHONE.
-
drop triggers---
CREATE PROC [dbo].[SP_DropTriggers]
AS
BEGIN
DECLARE @Table_Triggers SYSNAME, @trName sysname
DECLARE Cursor_Disabletriggers CURSOR FOR
SELECT object_name(parent_id) , name
FROM sys.triggers
OPEN Cursor_Disabletriggers
FETCH NEXT FROM Cursor_Disabletriggers
INTO @Table_Triggers ,@trname
DECLARE @SQL nvarchar(max)
WHILE @@FETCH_STATUS = 0
BEGIN
SET @SQL = 'drop trigger ' + 'dbo.'+@trname + ' on dbo.'+@Table_Triggers
select @sql
EXECUTE (@SQL)
FETCH NEXT FROM Cursor_Disabletriggers INTO @Table_Triggers ,@trname
END
CLOSE Cursor_Disabletriggers
DEALLOCATE Cursor_Disabletriggers
END
I would like to recreate them in separate proc, How can I achieve this?You need a permanent table to store the trigger code in:
create table
dbo.TriggerDefinitions
(TableName nvarchar(128) not null,
TriggerName nvarchar(128) not null,
TriggerDefinition nvarchar(max) not null,
constraint PK_TriggerDefinitions primary key (TableName, TriggerName))
go
In your procedure which drops the triggers you need to add code that stores the latest trigger definitions in the table above:
create procedure dbo.DropTriggers
as
begin
declare @TableName nvarchar(128),
@TriggerName nvarchar(128),
@TriggerDefinition nvarchar(max),
@DynamicSQL nvarchar(max)
declare TriggerCursor
cursor fast_forward for
select quotename(object_schema_name(po.object_id)) + '.' + quotename(po.name),
quotename(object_schema_name(co.object_id)) + '.' + quotename(co.name),
m.definition
from sys.sql_modules as m
join sys.objects as co
join sys.objects as po
on po.object_id = co.parent_object_id
on co.object_id = m.object_id
where co.type = 'tr'
open TriggerCursor
fetch next
from TriggerCursor
into @TableName,
@TriggerName,
@TriggerDefinition
while @@fetch_status = 0
begin
if exists(select top 1 1 from TriggerDefinitions where TableName = @TableName and TriggerDefinition = @TriggerDefinition)
update TriggerDefinitions
set TriggerDefinition = @TriggerDefinition
where TableName = @TableName
and TriggerName = @TriggerName
else
insert TriggerDefinitions
values (@TableName, @TriggerName, @TriggerDefinition)
if @@rowcount = 1
begin
set @DynamicSQL = 'drop trigger ' + @TriggerName + ' on ' + @TableName
print @DynamicSQL
--execute sp_executesql
-- @DynamicSQL
end
fetch next
from TriggerCursor
into @TableName,
@TriggerName,
@TriggerDefinition
end
close TriggerCursor
deallocate TriggerCursor
end
go
Finally the procedure which will re-create the triggers will simply query the table created and populated above and execute the code contained therein.
create procedure dbo.CreateTriggers
as
begin
declare @TableName nvarchar(128),
@TriggerName nvarchar(128),
@TriggerDefinition nvarchar(max),
@DynamicSQL nvarchar(max)
declare TriggerCursor
cursor fast_forward for
select *
from dbo.TriggerDefinitions
open TriggerCursor
fetch next
from TriggerCursor
into @TableName,
@TriggerName,
@TriggerDefinition
while @@fetch_status = 0
begin
set @DynamicSQL = @TriggerDefinition
print @DynamicSQL
--execute sp_executesql
-- @DynamicSQL
fetch next
from TriggerCursor
into @TableName,
@TriggerName,
@TriggerDefinition
end
close TriggerCursor
deallocate TriggerCursor
end
go
I've commented out the code which actually runs the dynamically created SQL. You'll have to uncomment those lines for the code I've posted will work. -
Weblogic server log files !! can i read them through HTTP using browser ?
hi all
i wonder if i can configure weblogic server or use a utility to read my log files in application,i need something like log file browsing in oracle webcenter content .
any advise ?
thanks
Edited by: hsweiss on Jul 18, 2012 9:28 AMHi,
I believe you can read log files using admin console. Go to Diagnostic--> logs and select the server which logs you want to see.
Regards,
Shashi
Maybe you are looking for
-
Hi. My name is Kim. I was wanting to know if anyone has gone through similar experience. I redeemed a iTunes gift card that was given to me. I'm told by iTunes store to sign in which I do, but then it takes me straight to billing I enter the correct
-
HT1977 it doesnt works on my ipod do u think is its about of it is 5 version
sir i cant sync downloaded apps to my ipod why is it so
-
Hi, We are planing to use standard inspection type 08 while receiving the material from STO. We activated the 08 (we are also using 01) inspection type in the material master (in the receiving plant). Please also note that we have not excluded any mo
-
I'm unable to connect to my yahoo e-mail on my IPAD2 since I have installed the new software? I can use safari and navagiate to my yahoo e-mail and get e-mail. I'm also unable to connect to the Icloud. Does anyone know what I may be doing wrong an
-
Hiding select column in LOV results table
Is there a way to hide the select column easily in an LOV popup window? Right now I have a two column results area and it appears the LOV object dynamically adds a column of radio buttons in a column labeled SELECT and another column labeled QUICK SE