DBCA - "Configure Database Options" is diabled

Hi,
I installed Oracle Database 10.2.0.4 without Oracle JVM. Now I want to add Oracle JVM.
However when I run dbca the option "Configure Database Option" is disabled. What can I do to enable it?
I read in Oracle doc http://download.oracle.com/docs/cd/B19306_01/java.102/b14187/chfour.htm#BABGAHEE the following:
If you have already installed Oracle Database without Oracle JVM, then you can add Java to your database through the modify mode of the Database Configuration Assistant of Oracle Database 10g. The modify mode enables you to choose the features, such as Oracle JVM, that you would like to install on top of an existing Oracle Database instance.and I'm trying now to do that. Is "Configure Database Option" what I need or it is something else?
OS: Solaris 10 x86

The issue is resolved. I just have forgotten to add an entry for my database to oratab file. Now the option is enabled in dbca.

Similar Messages

  • Missing Database Options under Configure menu in Sequence Editor

    In my TestStand 4.0 Sequence Editor, the "Database Options" is missing under "Configure" menu. Does anyone know how to enable this option?
    Thanks

    Glad that was it! Definitely narrows things down.
    These entries on the Configure menu are controlled by a special type of sequence in the process model called Configuration entry points. If you open up one of the default models, you will see a sequence in the Sequences pane called "Configure Database Options". This is the default database options sequence.
    It's possible that your custom model contains a Configure Database Options sequence, but that it isn't configured to be an entry point. You can change this setting by right-clicking the sequence and choosing Sequence Properties. 
    If the custom model does not contain the database functionality at all, further work may be required to add that functionality in. Here's a document explaining how to add new configuration entry points to a process model: http://www.ni.com/white-paper/3837/en Depending on whether this model was originally based on one of our default models and how much of the original database logging code is still present, it may require a fair amount of work to reimplement that functionality. It might be a good idea to contact the person who created this custom model to find out more information about why those database options were removed and how difficult it might be to reimplement them.
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • Delete a database option is not available in DBCA

    Hello,
    I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
    I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
    The databases are up and running.
    I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
    What is the problem? What should I do to get option to delte both databases from DBCA?
    Regards,
    Lovro

    pavli wrote:
    Hello,
    I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
    I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
    The databases are up and running.
    I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
    What is the problem? What should I do to get option to delte both databases from DBCA?
    Regards,
    LovroDBCA reads the ORATAB file on Unix to determine what databases exist to be dropped (and DBUA does the same to determine which databases are to be upgraded). Most likely the ORATAB file does not contain an uncommented entry for your database.
    Niall Litchfield
    http://www.orawin.info/

  • "Perform 1st-time configuration of Shared Services database" option disable

    Hi,
    Hyperion 11.1.2 shared services configuration “Perform 1st-time configuration of Shared Services database” option is disable
    I am going to do the configuration first time but Perform 1st-time configuration of Shared Services database” option is disabled.
    Please help here.
    Thanks
    Dharm

    Try starting the configurator from the command prompt with option -forceRegistry
    We were able to do it in v11.1.1.3... I think this can still be done with v11.1.2
    Thanks,
    Vijay

  • Error in Database Options Configuration

    My Teststan installation includes TS4.1 and TS3.5.  Under c:\ProgramFieles\NationalInstruments I have dir 'TestStand' and also 'TestStand35'.
    I'm running an application written in TS3.5 and it run fine.  However, when I select the 'Database Options' I get the following run-time error:
    An error occurred calling 'DisplayDatabaseOptionsDialog' in '_CTsDBOptions' of 'TestStand Database Options'
    -2147417851; User-defined error code.
    Possible System Error: The server threw an exception.
    Step 'Database Option - Display Dialog' of sequence 'Edit Database Options' in 'Database.seq'
    The file 'Database.seq'  is included in the 2 TestStand directories.  How do I know which file TS is trying to access?
    Thanks
    Rafi

    Rafi -
    Before you do a repair, have you run the TestStand Version Selector again to ensure that the correct TestStand engine and the correct Database Options server is registered? Then see if the problem still occurs.
    When you get the error, you should be able to break on the error, right click on the step select a command in the context menu to request the sequence editor to open the sequence file for the step, then look at the path of the file to determine which file is being run.
    Scott Richardson
    National Instruments

  • How can I change my database options after it's created ?

    Hi ,
    I'm using a 10 g oracle on a solaris 10 machine .I created a database and now I m willing to change the database option.I tried to use dbca but the Configuration Options checkbox is disabled.Is there any other way to change the database option ??.For instance ading the JVM support ?.
    Cheers.

    You will need to run the installation scripts....as noted in My Oracle Support (support.oracle.com)..
    Note:
    Database Version 10.2.0:
    Note.276554.1 How to Reload the JVM in 10.1.0.X and 10.2.0.X
    and
    Master Note for Oracle JVM [ID 1098505.1]
    Read, learn, Share,
    Regards
    Tim
    Please mark this thread as answered...

  • Sharepoint server 2013 configuration issue - failed to create configuration database

    Hi All,
    I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
    Some system configuration & info:
    - 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
    - 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
    - All of PCs were satisfied the requirement of Sharepoint server 2013
    - Firewall turned off & No antivirus tool was installed.
    - During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
    - During configuration, created a new farm with a domain user account.
    - Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
    ATTEMPTS:
    1. Tried install and set up all of steps with just 1 account - domain administrator.
    2. Tried with separate domain account:
    - SQL Service account use for:
    + Install SQL server 2008
    + Connect all SQL services
    + Admin for SQL server
    - Setup account use for:
    + Member of local administrator group in PC2
    + Install Sharepoint
    + Run Configuration wizard
    + Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
    + Was choose for the database account in configuration database step
    Also tried with SQL service account in this step.
    3. Tried with Standalone mode for Sharepoint installing
    4. Trie with domain name: Brainfiniti.local
    5. Tried with some another solution from topic relate to database configuration in our community but not successful.
    But all attempts are failed at this configuration database step :'(
    Please correct me if I am going wrong by missing something or do I need to start/install some services.
    Screenshot Attached
    Sorry! Cannot add screenshot because my account is still not verified. Will add later.
    LOG ENTRY:
    01/23/2013 06:58:28  1  INF        Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
    01/23/2013 06:58:28  1  INF          Found a task by the name of adminvs in the task collection
    01/23/2013 06:58:28  1  INF          Entering function TaskCommon.GenerateRandomUnUsedPort
    01/23/2013 06:58:28  1  INF            Entering function TaskCommon.EnsureIIs
    01/23/2013 06:58:28  1  INF              Entering function PreRequisiteChecks.IsIisInstalled
    01/23/2013 06:58:28  1  INF                Entering function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF                  Version of IIS is 7
    01/23/2013 06:58:28  1  INF                Leaving function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF              Leaving function PreRequisiteChecks.IsIisInstalled
    01/23/2013 06:58:28  1  INF              Entering function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF                Version of IIS is 7
    01/23/2013 06:58:28  1  INF              Leaving function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF              Entering function ServiceHelper.Start
    01/23/2013 06:58:28  1  INF                Trying to start service W3SVC and waiting 180 sec to do so
    01/23/2013 06:58:28  1  INF                service W3SVC is Running, nothing to do
    01/23/2013 06:58:28  1  INF                starting service W3SVC (it may already be started)
    01/23/2013 06:58:28  1  INF              Leaving function ServiceHelper.Start
    01/23/2013 06:58:28  1  INF            Leaving function TaskCommon.EnsureIIs
    01/23/2013 06:58:28  1  INF            Trying to see if port 40993 is free on machine APP.  Min port we will try is 1024, Max port we will try is 49151
    01/23/2013 06:58:30  1  INF            A SocketException was thrown with
    SocketError ConnectionRefused
    01/23/2013 06:58:30  1  INF            Connect has been refused for port 40993, so we will consider this a free port
    01/23/2013 06:58:30  1  INF            Have not found a free port yet.  Number of tries is 1.  Min port we will try is 1024, Max port we will try is 49151
    01/23/2013 06:58:30  1  INF            Adding port 40993 to the exclusion list so it is not chosen again during this run
    01/23/2013 06:58:30  1  INF          Leaving function TaskCommon.GenerateRandomUnUsedPort
    01/23/2013 06:58:30  1  INF        Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
    I just post a part of its logs which contain "error" string because it's too long.
    According this log, there is a error in port connection but i've turned firewall off ???
    Please help me with this mix up :'(
    p/s: sorry for my English!
    Thanks,
    Hien Hoang

    Below is the logs entry with "ERR" marked line:
    01/23/2013 07:03:17  9  INF                    Now joining to farm at server app.brainfiniti.com database SharePoint_Config
    01/23/2013 07:04:12  9  ERR                    Task configdb has failed with an unknown exception
    01/23/2013 07:04:12  9  ERR                    Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
    be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                      Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                        Resource id to be retrieved is ExceptionInfo for language English (United States)
    01/23/2013 07:04:12  9  INF                        Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. 
    Additional exception information: {1}
    01/23/2013 07:04:12  9  INF                      Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                    Leaving function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  INF                      Entering function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                        Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                          Resource id to be retrieved is ExceptionInfo for language English (United
    States)
    01/23/2013 07:04:12  9  INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. 
    Additional exception information: {1}
    01/23/2013 07:04:12  9  INF                        Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                      Leaving function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                    Leaving function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  ERR                    An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception
    information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  INF                    Entering function TaskBase.OnTaskStop
    01/23/2013 07:04:12  9  INF                      Creating the OnTaskStop event for task configdb
    01/23/2013 07:04:12  9  ERR                      Task configdb has failed
    01/23/2013 07:04:12  9  INF                      friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  9  INF                      debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                      Entering function TaskBase.FireTaskStateChanged
    01/23/2013 07:04:12  9  INF                        Firing the OnTaskStateChanged event for task configdb
    01/23/2013 07:04:12  9  INF                        Entering function TaskDriver.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                            Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
    for language English (United States)
    01/23/2013 07:04:12  9  INF                            Resource retrieved id ConfigurationDatabaseTaskDisplayName
    is configuration database
    01/23/2013 07:04:12  9  INF                          Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                          Received an TaskStateEventHandler event.  task:configdb TaskBase.State:stopped
    01/23/2013 07:04:12  9  INF                          Entering function TasksQueue.IncrementTaskFailed
    01/23/2013 07:04:12  9  INF                            Incremented the number of tasks failed to 1
    01/23/2013 07:04:12  9  INF                          Leaving function TasksQueue.IncrementTaskFailed
    01/23/2013 07:04:12  9  INF                          Task configdb has stopped and failed.  Total failed is now 1
    01/23/2013 07:04:12  9  INF                        Leaving function TaskDriver.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                        Entering function PsconfigBaseForm.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Invoking the UI thread with the task state chagne event
    01/23/2013 07:04:12  1  INF                          Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
    01/23/2013 07:04:12  1  INF                            Received an TaskStateEventHandler event.  task:configdb
    TaskBase.State:stopped TaskBase.TaskResultconfigdb
    01/23/2013 07:04:12  1  INF                            Acquiring the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Releasing the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Acquiring the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Releasing the reader lock to retrieve the state
    01/23/2013 07:04:12  1  ERR                            Task configdb has stopped and failed.  Total failed
    is now 1
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    disconnect
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter disconnect in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    connect
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter connect in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    create
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter create in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  1  INF                              Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
    for language English (United States)
    01/23/2013 07:04:12  1  INF                              Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
    is Failed to create the configuration database.
    01/23/2013 07:04:12  1  INF                            Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  1  INF                            Updating the task label below the progress bar Failed to
    create the configuration database.
    01/23/2013 07:04:12  1  INF                            Entering function FormParameterCollection.Add
    01/23/2013 07:04:12  1  INF                            Leaving function FormParameterCollection.Add
    01/23/2013 07:04:12  1  INF                            Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Updating the task additional notification information below
    the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  1  INF                          Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Sleeping an extra 1 ms so things don't go too fast for the user for this
    task
    01/23/2013 07:04:12  1  INF                          Not running in high contrast, so we will paint the background with our
    trademarked image
    01/23/2013 07:04:12  9  INF                        Leaving function PsconfigBaseForm.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                      Leaving function TaskBase.FireTaskStateChanged
    01/23/2013 07:04:12  9  INF                    Leaving function TaskBase.OnTaskStop
    01/23/2013 07:04:12  9  INF                  Leaving function TaskThread.ExecuteTask
    01/23/2013 07:04:12  4  INF                  Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  INF                    Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
    01/23/2013 07:04:12  4  INF                    Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
    01/23/2013 07:04:12  4  INF                  Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  ERR                  Task configuration database failed, so stopping execution of the engine
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key disconnect
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter disconnect in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key connect
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter connect in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key create
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter create in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  INF                    Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
    (United States)
    01/23/2013 07:04:12  4  INF                    Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
    database.
    01/23/2013 07:04:12  4  INF                  Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  ERR                  Failed to create the configuration database.
    An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  4  INF                  Entering function TaskDriver.NotifyTaskSummary

  • HOWTO configure parameter options in oracle apps R11i for reports ??

    Hello
    I've developed a character report with orientation = landscape ,width=180 and height=66 on my laptop.It takes FROM DATE & TO DATE input from user which are passed to the sql query.
    KINDLY GUIDE ME IN CONFIGURING PARAMETERS OPTIONS TO RUN THIS REPORT IN ORACLE APPLICATIONS 11i.
    More what would the Token Option be in my case.
    I'm pasting the sql query and the last line indicated in bold takes parameter.I'm working in the HR & PAYROLL SCHEMA.
    SELECT DISTINCT
    PAPF.PERSON_ID AS "PERSON_ID",
         PAPF.BUSINESS_GROUP_ID,
    PAPF.TITLE,
         PAPF.FIRST_NAME,
         PAPF.MIDDLE_NAMES,
         PAPF.LAST_NAME,
    PGD.SEGMENT4 AS "GRADE",
         PPG.SEGMENT1 AS "GROUP_NAME",
    PPG.SEGMENT2 AS "DEPARTMENT",
    PPEMP.PEM_ATTRIBUTE8 AS "PREVIOUS_SALARY",
    PAC.SEGMENT2 AS "SALARY_OFFERED",
    PQFS.TITLE AS "QUALIFICATIONS",
         (SELECT
         SUM(PPEMP.PEM_INFORMATION1)
              FROM
              PER_PREVIOUS_EMPLOYERS PPEMP
              WHERE
              PPEMP.PERSON_ID=PAPF.PERSON_ID
              AND PPEMP.BUSINESS_GROUP_ID=3788
              ) AS "RELEVANT_EXPERIENCE",
              (SELECT
              SUM(PPEMP.PERIOD_YEARS) ||' '||'Y'||' '|| SUM(PPEMP.PERIOD_MONTHS)||' '||'M'          
              FROM
              PER_PREVIOUS_EMPLOYERS PPEMP
              WHERE
              PPEMP.PERSON_ID=PAPF.PERSON_ID
              AND PPEMP.BUSINESS_GROUP_ID=3788
              ) AS "TOTAL_EXPERIENCE",
              (SELECT PJD.SEGMENT4
                   FROM                
                                  PER_JOBS PJ,
                                  PER_JOB_DEFINITIONS PJD
    WHERE                         PAPF.PERSON_ID=PAAF.PERSON_ID
    AND                              PAAF.JOB_ID=PJ.JOB_ID                          
    AND                          PJ.JOB_DEFINITION_ID = PJD.JOB_DEFINITION_ID
    AND                          PJ.BUSINESS_GROUP_ID = 3788) AS "FUNCTIONAL_TITLE"
    FROM
    PER_ALL_PEOPLE_F PAPF,
    PER_ALL_ASSIGNMENTS_F PAAF,
         PER_JOBS PJ,
         PER_JOB_DEFINITIONS PJD,
    PAY_PEOPLE_GROUPS PPG,
    PER_GRADES PG,
         PER_GRADE_DEFINITIONS PGD,
    PER_QUALIFICATIONS PQFS,
    PER_PREVIOUS_EMPLOYERS PPEMP,      
    HR_ALL_ORGANIZATION_UNITS HRAOU,
         PER_PERSON_ANALYSES PPALYS,
         PER_ANALYSIS_CRITERIA PAC,
         APPS.FND_ID_FLEX_STRUCTURES FIFS,
         HR_LOCATIONS_ALL HLA,
         PER_APPLICATIONS PA
    WHERE PAPF.PERSON_ID = PAAF.PERSON_ID
    AND PAAF.GRADE_ID = PG.GRADE_ID
    AND PG.GRADE_DEFINITION_ID = PGD.GRADE_DEFINITION_ID
    AND PAAF.PEOPLE_GROUP_ID = PPG.PEOPLE_GROUP_ID
    AND     PAAF.JOB_ID (+)=PJ.JOB_ID
    AND PJ.JOB_DEFINITION_ID (+)=PJD.JOB_DEFINITION_ID
    AND PQFS.PERSON_ID (+)= PAPF.PERSON_ID
    AND PPEMP.PERSON_ID (+)= PAPF.PERSON_ID
    AND HRAOU.ORGANIZATION_ID (+)= PAAF.ORGANIZATION_ID
    AND PAPF.BUSINESS_GROUP_ID=3788
    AND PAPF.EFFECTIVE_END_DATE=TO_DATE('31/12/4712','DD/MM/RRRR')
    AND PAAF.EFFECTIVE_END_DATE=TO_DATE('31/12/4712','DD/MM/RRRR')
    AND PAPF.CURRENT_APPLICANT_FLAG='Y'
    AND PAAF.ASSIGNMENT_TYPE='A'
    --AND    HRAOU.ORGANIZATION_ID = PAAF.ORGANIZATION_ID
    AND nvl(PPEMP.END_DATE,TO_DATE('31/12/4712','DD/MM/RRRR'))=nvl((SELECT MAX(END_DATE)
    FROM PER_PREVIOUS_EMPLOYERS P
              WHERE PPEMP.PERSON_ID=P.PERSON_ID),TO_DATE('31/12/4712','DD/MM/RRRR'))
    AND PAPF.PERSON_ID=PPALYS.PERSON_ID
    AND PPALYS.ANALYSIS_CRITERIA_ID=PAC.ANALYSIS_CRITERIA_ID
    AND FIFS.ID_FLEX_NUM=PAC.ID_FLEX_NUM
    AND FIFS.STRUCTURE_VIEW_NAME='HIRING APPROVAL'
    AND HLA.LOCATION_ID=PAAF.LOCATION_ID
    AND PA.PERSON_ID=PAAF.PERSON_ID
    AND PAPF.EFFECTIVE_START_DATE between :From_Date And :To_Date

    Hi Dinesh
    I have some bad news for you I'm afraid. Discoverer workbooks are not stored as SQL definitions, they are stored as BLOBs within the database. It is therefore not possibly to write any sort of query to interrogate the inner workings of a workbook. The only way to do this is to open each workbook in turn and analyze it.
    Sorry to be the bringer of bad news
    Best wishes
    Michael

  • Unable to Configure Database in ConsoleOne

    PROBLEM
    I can navigate to Tools->Zenworks Inventory->Configure Database, browse to
    and select {server_name}_invDatabase. However, when I click OK the mouse
    pointer just turns into an hourglass. The window wont close and accept
    the change. You end up clicking Cancel with the hourglass to close the
    window. You can right click on the {server_name}_invDatabase object in
    eDir and choose Zenworks Inventory->Configure DB but when you attempt to do
    a query or something a window pops up prompting you to first configure your
    database.
    SYSTEM
    Netware 6.5 SP5.
    ConsoleOne 1.3.6e with Zenworks 6.5.2 snapins (after upgrade, see below)
    We were running Zenworks for Desktops 4 until I upgraded to Zenworks 6.5
    SP1 about a year to year and a half ago. Some time after that the
    Inventory functionality stopped. Im now trying to fix it.
    ATTEMPTS TO FIX
    1. I first applied Support Pack 2 for Zenworks 6.5. That didnt fix my
    problem.
    2. I then tried reinstalling the Inventory Service off the Zenworks 6.5
    with SP1 CD, starting the Inventory service, and then reapplying SP2. That
    didnt fix it.
    3. I have followed the steps in Novell TID # 10097151. I actually had been
    wondering which object was the correct one, if it was Inventory
    Service_{server_name} or {server_name}_ZenInvService. After following
    these steps I am seeing computers getting inventoried on the Inventory
    Service console screen. That wasnt happening before. So this fixed one
    of my problems but not all of them.
    4. I then followed the steps in Novell TID #10097366. I confirmed the
    usernames were set as shown and retyped the passwords. I even restarted
    the Sybase (ASA) and Zen Inventory services at the console but that didnt
    fix it.
    5. I found this thread
    (http://groups.google.com/group/novel...b931657601b01a)
    in which other users were dealing with the same problem. I found an older
    copy of InventorySnapins.jar as specified and tried it but that didnt fix it.
    What can I try next? I really want to use Zenworks to hunt for old apps on
    my network that were not using anymore.
    And in a side note, where *do* you configure Zenworks to scan a workstation
    for applications? The software scan tab of the workstation inventory
    policy has a footnote saying these settings only apply to ZfD 3.2, 4, and
    4.01. I checked the ZfD 6.5 SP2 manual and it says about the same thing
    verbatim. However, neither one includes a helpful sentence telling you
    *where* to set this if you are using Zenworks 6.5 or even referring to a
    different chapter or section of the manual. Does Zenworks just assume that
    if you want to inventory the hardware that you want the software
    inventoried as well and just do it automatically?
    Thanks in advance for your help!
    Matthew

    I see. It seems there was a change in assumptions when Novell moved from
    Zenworks 4 to 6.5. Previously it seems there was the assumption that since
    desktop computers weren't that powerful it might overwhelm them to scan for
    both hardware and software. Therefore, these options were put next to each
    other so you could choose. In Zenworks 6.5 the assumption is that, since
    client computers have become more powerful, if you're scanning the client
    hardware you're going to want to scan the software as well. Therefore they
    took away the use of the software tab and made it less obvious on how to
    disable scanning.
    Everything seems to be working for me now on Zenworks Inventory. It's been
    inventorying for about 48 hours now and has updated most of my stale
    records. I want to thank Shaun for all the posts he replies to on the
    Zenworks newsgroups. I've seen his replies all over the place as I was
    searching through Google Groups trying to fix this and they helped me fix my
    problems.
    Matthew

  • Planning "Configure Product Option" using configuration utility

    Hi All,
    I have installed HSS on server1 and Planning, Oracle DB in server 2.
    Done the HSS configuration and i can able to log into HSS successfully. When i tried to configure my planning,
    1. Open the EMP system configurator from planning server
    2. Select Hyperion Foundation ( Configure DB, Common database). Here by default "Previousely configure the DB" was secected and configuration was success.
    3. Next select planning "Configure Product Option" was not success.
    Register with shared service was failed.
    getting following error messages.
    (Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Authentication failed:
    com.hyperion.interop.lib.OperationFailedException: Unable to Authenticate.Unable to Authenticate.
         at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
         at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.Exception: Unable to Authenticate.Unable to Authenticate.
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Jul 24, 2011, 00:32:12 PM), com.hyperion.audit.client.exception.AuditLoggingHandler, ERROR, XML-RPC failed
    org.apache.xmlrpc.XmlRpcException: org.apache.xmlrpc.XmlRpcException: null values not supported by XML-RPC
         at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeException(XmlRpcClientResponseProcessor.java:104)
         at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeResponse(XmlRpcClientResponseProcessor.java:71)
         at org.apache.xmlrpc.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:73)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:194)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:185)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:178)
         at com.hyperion.audit.client.AuditXmlRpcClient.pingServerForStartUp(Unknown Source)
         at com.hyperion.audit.client.runtime.PingForServerStartUp.run(Unknown Source)
    Please help me to solve this issue.
    Thanks in Advance,
    GTS.

    Hi
    Assuming this is 11.1.2.1 env.For Planning were you able to
    Deploy to app server
    Configure database

  • Database Option not available in UCCX 9.0.2

    Hello there,
    I  have installed Cisco UCCX 9.0.2 and trying to access Database option  under Subsystems but unfortunately it is not listed under Subsystems  menu.
    Snapshot is attached..
    Is it a licensing issue or something else has to be done?
    Thanks in advance.

    Hi Afzal,
    depends on the license :
    The database subsystem is available if your system has a license installed for
    either the Unified IP IVR or Unified CCX Premium product packages. If you are
    not using Unified CCX applications that require access to databases, you do not
    need to provision the Database subsystem.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_0/configuration/guide/UCCX_BK_U767AC77_00_uccx-admin-guide/UCCX_BK_U767AC77_00_uccx-admin-guide_chapter_01000.html
    u have got which license with you ?
    regds,
    aman

  • Error -18351 when accessing TS database options

    I have not used the system in a month and now when I try to access the 'Database options' window in Teststand from the Configure menu I receive the following message:
    Details
    The type library information for 'TestStand API 2.0' was not found.
    Make sure the server is registered with the system.
    Error Code
    -18351; An error occurred reading an ActiveX Automation server type library.
    Location
    Step 'Create UUTResult' of sequence 'Edit Database Options' in 'Database.seq'
    Has anyone seen this before? I am using TS 3.1 on Win2K.

    Hey plf,
    Have you seen this Discussion Forum.   I think it is very similar to the error you are seeing.  Try the steps in there and if that fails then let me know and we'll see what else we can figure out. 
    You need to open the Database.seq file inside of this directory: C:\Program Files\National Instruments\TestStand 3.1\Components\NI\Models\TestStandModels\Database  and go to the Edit Database Options from the View drop down.  Then you can right click on Create UUTResult and click on Specify Module.  Yours should be similar to the one I'm attaching.  Check and make sure it is.
    Message Edited by Sam R on 02-09-2006 12:47 PM
    Message Edited by Sam R on 02-09-2006 12:48 PM
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    SpecifyModule.jpg ‏1177 KB

  • Database option and Recovery order

    Hi All, How to know the below options on Sybase. A. Database option:  Are the database options for Sybase ASE database currently set: 1. ddl in tran 2. allow nulls by default 3. allow wide dol rows 4. enforce dump tran sequence 5. full logging for all   B. Database recovery order:  Is the recovery order of the following databases as follows: 1. saptools 1 strict 2. 'production database' 2 strict 3. saptempdb 3 strict Please let mw know. Regards, karthik

    Also you can specify the order of recovery:
    You can use sp_dbrecovery_order to configure more important databases to be recovered earlier. You must be in the master database and have system administrator privileges to usesp_dbrecovery_order to enter or modify a user-defined recovery order. Any user, in any database, can use sp_dbrecovery_order to the user-defined recovery order of databases. SeeReference Manual: Procedures.
    sp_dbrecovery_order has an additional parameter indicating the online ordering.
    sp_dbrecovery_order [database_name [, rec_order [, force [ relax | strict ]]]]
    relax – the databases are made as they recover (default).
    strict – the databases are specified by the recovery order.
    The default is relax, which means that databases are brought online immediately when recovery has completed.

  • Sharepoint 2013 MP - Configuration Database connection failed

    Hi all!
    I run a WS2012 R2 with SCOM 2012R2. I'm trying to monitor Sharepoint 2013 Farm, with the Sharepoint 2013 MP. The Sharepoint farm and it's SQL server is on another domain, with two-way trust, and the agents are working on the Sharepoint and SQL servers.
    I use SQL aliases for Sharepoint DB's, so I've made an override to the connection string to make it connect to the correct database. 
    The override is working fine, I can see that SCOM is trying to connect to the SQL server, but I cannot seem to make SCOM use the correct Run As account on these configuration databases. Most of the Sharepoint MP seems to be working fine, with the farm admin
    account, but I don't know how I can force this override connectionString to use a specific user.
    WS2012R2 with SCOM2012R2 UR3
    Sharepoint 2013 Farm on WS2008R2 OS.
    MS SQL 2012 on WS2008R2.
    It uses the default SCOM monitoring account, instead of the Sharepoint RunAs account.
    Any suggestions?
    How do I make it use the correct Run As account?
    (This guy has the
    same problem)
    Thanks,
    Nikolaj

    I was looking at this issue not too long ago, and looked through the management pack xml, to see if there was a missing secure reference for DB connection monitors. I only glanced through the MP, but it looked to me as if the DB connection
    monitors references the same account as the other sharepoint monitors. (Yes, that full-blown farm admin account). Again I am not sure, but it seems the management pack has trouble using the referenced RunAs account in the connection strings and then, because
    the watcher node is setup default to run off the management server, it falls back to the management server action account.
    You mention, that you have a two-way trust between you management group and SPS SQL servers. You could then bring this to work by granting your management server action account public rights on your configuration and content DB’s. Not
    optimal, but it’s a workaround. For SPS 2013 this should work without changing the connection strings, as you would have to with SPS 2010.
    I know this is not solution you’re are looking for, but it just might be enough for you to get a step further. I don’t know of any solution, so far, to get the DB connections to use the SPS RunAs account.

  • Failed to create configuration database on Sharepoint Foundation 2010 install under Windows 7

    Configuration Failed
    Failed to create the configuration database.
    An exception of type System.IO.FileNotFoundException was thrown. Additional exception information:could not load file or assembly 'Microsoft.IdentityModel, version = 3.5.0.0,culture=neutral, PublicKey Token=31bf3856ad364e35' or one of its dependencies. The
    system cannot find the files specified.
    I already installed microsoft sharepoint foundation 2010 but I got the error as per above.How to solve this problem?

    Hi,
    Also check out Bill Baer's post:
    Common Microsoft SharePoint Server 2010 Installation Issues and Resolutions
    http://blogs.technet.com/b/wbaer/archive/2009/12/11/common-microsoft-sharepoint-server-2010-installation-issues-and-resolutions.aspx
    Thanks.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for