DBCA does not show the remote nodes on a RAC 10.2.0.2 HP-ITANIUM

HI at all,
I have a problem and I hope someone can help me.
A collegue have installed CRS and the Oracle HOME for a RAC 10.2.0.2 on a HP-ITANIUM ( two nodes) .
Im'm using the dbca for creating a cluster database.
I can see the RAC option pages , but in the "select nodes page" I found only the local node and not the remote node.
Any suggestion is appreciated
thank you
Adriano
$ crs_stat
NAME=ora.itmicz50.LISTENER_ITMICZ50.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz51.LISTENER_ITMICZ51.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
and the olsnodes command :
$ olsnodes
itmicz50
itmicz51
Message was edited by:
user549224
null

HI Chandra,
thank you very much for your reply. I suppose the oraInventory is the same, however the contents of inventory.xml file is this:
<?xml version="1.0" standalone="yes" ?>


<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OUIHome1" LOC="/work/app/oracle/product/CRS" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="itmicz50"/>
<NODE NAME="itmicz51"/>
</NODE_LIST>
</HOME>
<HOME NAME="OUIHome2" LOC="/work/app/oracle/product/RAC10g" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="itmicz50"/> <===== EVIDENCE
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
I can see that within the node_list tag I have only one hostname It is correct?
thank you in advance
Adriano Capruzzi

Similar Messages

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

My playlists show how many titles are in the playlist but does not show the list of titles

my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?

Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

mardemar wrote:
... - the only one without an x delete button.
What is the name of this App and where did you get it...?

File name does not showing the InDesign icon?

I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
Also I could not open the file in any version.
Can somebody help me?

there is no screen shot...
You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this:

DBCA does not show the remote nodes on a RAC 10.2.0.2 HP-ITANIUM

Similar Messages

Maybe you are looking for