Dbca error 11g

Hello ,
i am trying to create database via dbca 11g on solaris 10.
When i get to 2%, i recived this mesage:
http://i43.tinypic.com/15pjq00.jpg
and dbca hangs there on 2% forever.
/u01 have almost 30G free space.
What could the cause for this ?

What is free space in /tmp mount point..
Also you are getting error while creating process.
Can you check +all kernel parameters according to installation guide.
Regards
Rajesh

Similar Messages

DBCA error on Caldera OpenUnix 8

I installed Oracle 9i Enterprise Edition Database on OpenUNIX 8 (SCO UnixWare 7.1.3 + Caldera OpenLinux 3.1.1 RPM). Net Assistant was completed automatically after the installation while the next tool (Database Configuration Assistant) didn't run correctly, so I had to complete the instalation without creating any database. Runing that tool after (bash-2.05$ ./dbca )shows the same error message, as below :
SIGSEGV 11* segmentation violation
stackbase=0x450b8000, stackpointer=0x450b75b0

Pl see this related thread - DBCA error in Oracle_Developer_Days Package
HTH
Srini

DBCA Error 5

Hi,
Having some trouble using DBCA to configure options in a database. Immediately after specifying the database I get the following error:
There is an error in creating the following process: ...\sqlplus -S /NOLOG
The error is:
CreateProcess: ...\sqlplus -S /NOLOG
error=5
Anybody knows what it is?
Thanks
Paulo

Pl see this related thread - DBCA error in Oracle_Developer_Days Package
HTH
Srini

DBCA ERROR WHILE CREATING A DATABASE

While creating a RAC database using DBCA, DBCA gave the folling error -
"Virtual IP address is not configured for cluster node "pdb1". Run
"/opt/app/oracle/product/10.2.0/oracle/bin/vipca" as "root" user to configure
it before performing the "create Database opration"
I couldn't find vipca in oracle home.
So, i started vipca from crs home as a root user and i got the following error
while configuring the VIP -
" CRS-0211: Resource 'ora.pdb1.vip' has already been registered"
Thanks,

A bit old but still useful info for Raw Device
http://www.fors.com/orasupp/unix/37914_1.HTM
If you are using 10gR2 consider use ASM instead.

DBCA errors while installing Oracle 10g on Windows 7

Hi all,
I'm trying to install Oracle 10g database on Windows 7 operating system. Software is installed without any error. But it gets following exceptions while running dbca from $ORACLE_HOME/bin/ directory...
java.lang.NullPointerException
at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(
OiicStandardInventorySession.java:426)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:254)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:229)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:178)
at oracle.sysman.emcp.util.OUIInventoryUtil.getInstallInventory(OUIInven
toryUtil.java:117)
at oracle.sysman.emcp.util.OUIInventoryUtil.getAllCentralAgentHomeLoc(OU
IInventoryUtil.java:586)
at oracle.sysman.emcp.util.CentralAgentUtil.getCentralAgentHomeAndURL(Ce
ntralAgentUtil.java:296)
at oracle.sysman.emcp.EMConfig.getCentralAgentHomeAndURL(EMConfig.java:6
16)
at oracle.sysman.assistants.util.OsUtilsBase.enumerateAgents(OsUtilsBase
.java:1638)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.initializePage
(ManagementOptionsPage.java:402)
at oracle.sysman.assistants.util.wizard.WizardPageExt.onSetActive(Wizard
PageExt.java:94)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.onSetActive(Ma
nagementOptionsPage.java:482)
at oracle.sysman.assistants.util.wizard.WizardExt.wizardSelectionChanged
(WizardExt.java:166)
at oracle.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:
237)
at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
It might be possible that I'm using wrong installation source for the same. It would be nice if anyone can lemme know which link from http://download.oracle.com to access for Oracle 10g R2 source on Windows 7?
Can anyone pls help me out to solve this query??
Thanks in anticipation.

At which point did it occur to you that Windows 7 was developed and released after any version of Oracle 10g and was both uncertified and untested on this platform? ;)
10g will fall off the cliff into desupport in just two weeks. Toss it out and install 11.2.0.1.

Oracle 9i on Windows 2003 server - DBCA error

1. This is the error message that I get when I am trying to install the 9.2.0.3 software in a new oracle home. There is a 10g database which sits in a different Oracle home. The OUI runs smoothly until it comes to the point where the Database Config Assistant tool starts running and then I get this error and the installer hangs. Could anyone let me know why I might be getting this error.
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at
     at oracle.sysman.assistants.dbca.backend.Verifier.isRawFeasible(Compiled Code)
     at oracle.sysman.assistants.dbca.backend.Verifier.processRawConfigFile(Compiled Code)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.performOperation(ProgressOnlyHost.java:138)
     at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:2171)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:99)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Agent Config Asst
Parameter "orahome" = C:\Oracle\product\ora92
Parameter "nodeinfo" = NO_VALUE
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at oracle.agent.AgentCA.configureOPS(AgentCA.java:74)
     at oracle.agent.AgentCA.main(AgentCA.java:39)
Exception in thread "main"
FYI - I have installed the OUI patch Oracle Universal Installer release 2.2.0.18.0 for Windows and the Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows after I installed the 9.2.0.1 database software.
I then tried to run the DBCA tool from the 'Start > Programs>Oracle 9ihome>' menu to create the new Oracle 9.2.0.3 database but the DBCA assistant would not start up.
2. I have a related question:
Has anybody performed a downgrade of Oracle 10g database to Oracle 9.2.0.3 database using export/import?
Can you perform a full database export of the Oracle 10g database using the 9.2.0.3 export utility and then perform a full database import into Oracle 10g? I have read some documentation that states this is not possible. Can anyone verify or confirm how they did this migration? So is the only option then to perform a table or user level export?
Also, if both the databases reside on the same Windows 2003 server box, how can you ensure that the source database files are not overwritten?
Any help would be appreciated.
Thanks,
Vishal.

It only happens when you have oracle 10g and Oracle 9i on the same machine.
You can run 9i dbca successfully, if you rename the 10g "orasrvm.DLL" found in any 10g BIN directory. Rename it back after you are 9i dbca is complete.
Please complete details for this issue see
http://orafaq.net/maillist/oracle-l/2004/10/08/0335.htm
Thanks
Ravisayal

DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
Arya

Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

Oracle 10g DBCA error - not enough space on root?

Im running Oracle 10g on HP-UX 11i.
Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
The above is true but I am not putting any datafiles/ redo logs etc on root they are on a separte logical volume. Why does it need all this space on root? I cant add any more space to root anyway as I cant unmount root and extend it.
Cant find anything about this in the oracle documentation, I can only think my oracle software install has got messed up causing this strange error?
Can anyone help? Thanks.

@ Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
When you create database with DBCA, it gives a few options like General purpose, OLTP, etc.
Did you pick same options both the time?

Run Web Layout Error 11g R2 Report

Report Builder 11.1.2.0.0
When button pressed on Run Web Layout in Oracle Report Builder then
It's show Error:-
java.lang.NoClassDefFoundError:
javax/servlet/tagext/tagLibraryInfo
Installed proucts are:-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle 11g R2 (Forms & Reports )
Please give advice

Have you checked out {thread:id=2418100} ?
Cheers,

DBCA errors and do not create DB

While I try to create DB using Oracle 9i DBCA, I get error that /etc/oratab file doesn't exist and do not create DB on Unix tru64.
I already have many DBs on the server, I need to create a small test DB.
I see the oratab file exist but is renamed with suffix like oratab_h
now how do I point DBCA to that oratab file. I dont want other db to be disturbed if i run root.sh file.
any suggestions, shall rename the oratab to original name or run root.sh? what the best solution.
This looks like Oracle RAC version of DB Software.
When i open DBCA i get option like:
What type of database would you like to create or administer?
1) Oracle cluster database
2) Oracle Single instance database
I found no diff in both the options to create DB.
Appreciate sugestions.
Thanks

*** Duplicate Post ***
KN ... it is not acceptable to repost the same question. If no one answers it is because they don't know the answer or don't wish to answer (we are all volunteers).
Thank you.

DBCA Errors while installing Oracle AS 10g Rel2 on Solaris 10

I am trying to install Oracle AS 10g r2 on solaris 10. After the end of the installation when dbca starting to create database dbca shows ora-03113 end-of-file in communication channel error. this is very critical for me. please help me to resolve. thanks in advance.

Here is the log found in ORACLE_HOME/oraInventory/logs
*** Starting OUICA ***
Oracle Home set to /oracle/10gASInfra
Configuration directory is set to /oracle/10gASInfra/cfgtoollogs. All xml files under the directory will be processed
Parsing configuration file config.xml ....
Ended Parsing configuration file config.xml
Start Processing configuration tool Oracle Database Upgrade Assistant....
Preparing for copying /oracle/10gASInfra/assistants/dbma/logs/* to /oracle/10gASInfra/cfgtoollogs
Buffer size for copying file is set to 2048
Expanding source path /oracle/10gASInfra/assistants/dbma/logs/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/assistants/dbma/logs/*. Nothing will be copied.
End Processing configuration tool Oracle Database Upgrade
Assistant
Start Processing configuration tool Oracle Database Configuration Assistant....
Preparing for copying /oracle/10gASInfra/../admin/asdb/bdump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/../admin/asdb/bdump/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/../admin/asdb/bdump/*. Nothing will be copied.
Preparing for copying /oracle/10gASInfra/../admin/asdb/cdump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/../admin/asdb/cdump/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/../admin/asdb/cdump/*. Nothing will be copied.
Preparing for copying /oracle/10gASInfra/../admin/asdb/udump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/../admin/asdb/udump/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/../admin/asdb/udump/*. Nothing will be copied.
Preparing for copying /oracle/10gASInfra/../admin/asdb/create/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/../admin/asdb/create/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/../admin/asdb/create/*. Nothing will be copied.
Preparing for copying /oracle/10gASInfra/admin/asdb/bdump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/admin/asdb/bdump/*
Adding the file /oracle/10gASInfra/admin/asdb/bdump/alert_asdb.log from the file path expanding...
Completed copying file /oracle/10gASInfra/admin/asdb/bdump/alert_asdb.log to /oracle/10gASInfra/cfgtoollogs/alert_asdb.log
Number of file(s) copied is 1
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/admin/asdb/cdump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/admin/asdb/cdump/*
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_3831 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_3881 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_3884 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4173 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4175 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4178 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4193 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4195 from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/cdump/core_4198 from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/admin/asdb/udump/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/admin/asdb/udump/*
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_3881.trc from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_3884.trc from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4175.trc from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4178.trc from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4195.trc from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4198.trc from the file path expanding...
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_3881.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_3881.trc
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_3884.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_3884.trc
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4175.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_4175.trc
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4178.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_4178.trc
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4195.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_4195.trc
Completed copying file /oracle/10gASInfra/admin/asdb/udump/asdb_ora_4198.trc to /oracle/10gASInfra/cfgtoollogs/asdb_ora_4198.trc
Number of file(s) copied is 6
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/admin/asdb/create/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/admin/asdb/create/*
Adding the file /oracle/10gASInfra/admin/asdb/create/CloneRmanRestore.log from the file path expanding...
Adding the file /oracle/10gASInfra/admin/asdb/create/rmanDeleteFiles.sql from the file path expanding...
Completed copying file /oracle/10gASInfra/admin/asdb/create/CloneRmanRestore.log to /oracle/10gASInfra/cfgtoollogs/CloneRmanRestore.log
Completed copying file /oracle/10gASInfra/admin/asdb/create/rmanDeleteFiles.sql to /oracle/10gASInfra/cfgtoollogs/rmanDeleteFiles.sql
Number of file(s) copied is 2
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/rdbms/audit/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/rdbms/audit/*
Adding the file /oracle/10gASInfra/rdbms/audit/ora_3831.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_3882.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_3885.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4173.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4176.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4179.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4193.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4196.aud from the file path expanding...
Adding the file /oracle/10gASInfra/rdbms/audit/ora_4199.aud from the file path expanding...
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_3831.aud to /oracle/10gASInfra/cfgtoollogs/ora_3831.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_3882.aud to /oracle/10gASInfra/cfgtoollogs/ora_3882.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_3885.aud to /oracle/10gASInfra/cfgtoollogs/ora_3885.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4173.aud to /oracle/10gASInfra/cfgtoollogs/ora_4173.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4176.aud to /oracle/10gASInfra/cfgtoollogs/ora_4176.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4179.aud to /oracle/10gASInfra/cfgtoollogs/ora_4179.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4193.aud to /oracle/10gASInfra/cfgtoollogs/ora_4193.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4196.aud to /oracle/10gASInfra/cfgtoollogs/ora_4196.aud
Completed copying file /oracle/10gASInfra/rdbms/audit/ora_4199.aud to /oracle/10gASInfra/cfgtoollogs/ora_4199.aud
Number of file(s) copied is 9
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/assistants/dbca/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/assistants/dbca/logs/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/assistants/dbca/logs/*. Nothing will be copied.
End Processing configuration tool Oracle Database Configuration Assistant
Start Processing configuration tool Internet Directory Configuration Assistant....
Preparing for copying /oracle/10gASInfra/ldap/log/oidca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/ldap/log/oidca.log
Adding the file /oracle/10gASInfra/ldap/log/oidca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/ldap/log/oidca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/ldap/log/dipca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/ldap/log/dipca.log
Adding the file /oracle/10gASInfra/ldap/log/dipca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/ldap/log/dipca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
Preparing for copying /oracle/10gASInfra/ldap/log/dasca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/ldap/log/dasca.log
Adding the file /oracle/10gASInfra/ldap/log/dasca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/ldap/log/dasca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Internet Directory Configuration Assistant
Start Processing configuration tool Directory Integration Platform Configuration Assistant....
Preparing for copying /oracle/10gASInfra/ldap/log/odca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/ldap/log/odca.log
Adding the file /oracle/10gASInfra/ldap/log/odca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/ldap/log/odca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Directory Integration Platform Configuration Assistant
Start Processing configuration tool Infrastructure Schema Configuration Assistant....
Preparing for copying /oracle/10gASInfra/config/schemaload.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/schemaload.log
Adding the file /oracle/10gASInfra/config/schemaload.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/schemaload.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Infrastructure Schema Configuration Assistant
Start Processing configuration tool Ultra Search Security Configuration Assistant....
Preparing for copying /oracle/10gASInfra/assistants/opca/ultrasearchInst.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/assistants/opca/ultrasearchInst.log
Adding the file /oracle/10gASInfra/assistants/opca/ultrasearchInst.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/assistants/opca/ultrasearchInst.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Ultra Search Security Configuration Assistant
Start Processing configuration tool Delegated Administrative
Service Configuration Assistant....
Preparing for copying /oracle/10gASInfra/ldap/log/oidca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/ldap/log/oidca.log
Adding the file /oracle/10gASInfra/ldap/log/oidca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/ldap/log/oidca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Delegated Administrative Service Configuration Assistant
Start Processing configuration tool
Single Sign On Configuration Assistant....
Preparing for copying /oracle/10gASInfra/sso/log/ssoca.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/sso/log/ssoca.log
Adding the file /oracle/10gASInfra/sso/log/ssoca.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/sso/log/ssoca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Single Sign On Configuration Assistant
Start Processing configuration tool Infrastructure modo_sso Configuration Assistant....
Preparing for copying /oracle/10gASInfra/config/infratool_mod_osso.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_mod_osso.log
Adding the file /oracle/10gASInfra/config/infratool_mod_osso.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_mod_osso.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Infrastructure modo_sso Configuration Assistant
Start Processing configuration tool OPMN Configuration Assistant-start OPMN....
Preparing for copying /oracle/10gASInfra/opmn/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/opmn/logs/*
Adding the file /oracle/10gASInfra/opmn/logs/opmn.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ons.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ipm.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/states from the file path expanding...
Completed copying file /oracle/10gASInfra/opmn/logs/opmn.log to /oracle/10gASInfra/cfgtoollogs/opmn.log
Completed copying file /oracle/10gASInfra/opmn/logs/ons.log to /oracle/10gASInfra/cfgtoollogs/ons.log
Completed copying file /oracle/10gASInfra/opmn/logs/ipm.log to /oracle/10gASInfra/cfgtoollogs/ipm.log
Number of file(s) copied is 3
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant-start OPMN
Start Processing
configuration tool OPMN Configuration Assistant-start HTTP server....
Preparing for copying /oracle/10gASInfra/opmn/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/opmn/logs/*
Adding the file /oracle/10gASInfra/opmn/logs/opmn.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ons.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ipm.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/states from the file path expanding...
Completed copying file /oracle/10gASInfra/opmn/logs/opmn.log to /oracle/10gASInfra/cfgtoollogs/opmn.log
Completed copying file /oracle/10gASInfra/opmn/logs/ons.log to /oracle/10gASInfra/cfgtoollogs/ons.log
Completed copying file /oracle/10gASInfra/opmn/logs/ipm.log to /oracle/10gASInfra/cfgtoollogs/ipm.log
Number of file(s) copied is 3
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant-start HTTP server
Start Processing
configuration tool OPMN Configuration Assistant-start DAS Instance....
Preparing for copying /oracle/10gASInfra/opmn/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/opmn/logs/*
Adding the file /oracle/10gASInfra/opmn/logs/opmn.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ons.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ipm.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/states from the file path expanding...
Completed copying file /oracle/10gASInfra/opmn/logs/opmn.log to /oracle/10gASInfra/cfgtoollogs/opmn.log
Completed copying file /oracle/10gASInfra/opmn/logs/ons.log to /oracle/10gASInfra/cfgtoollogs/ons.log
Completed copying file /oracle/10gASInfra/opmn/logs/ipm.log to /oracle/10gASInfra/cfgtoollogs/ipm.log
Number of file(s) copied is 3
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant-start DAS Instance
Start Processing
configuration tool OPMN Configuration Assistant-start OCA Instance....
Preparing for copying /oracle/10gASInfra/opmn/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/opmn/logs/*
Adding the file /oracle/10gASInfra/opmn/logs/opmn.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ons.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ipm.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/states from the file path expanding...
Completed copying file /oracle/10gASInfra/opmn/logs/opmn.log to /oracle/10gASInfra/cfgtoollogs/opmn.log
Completed copying file /oracle/10gASInfra/opmn/logs/ons.log to /oracle/10gASInfra/cfgtoollogs/ons.log
Completed copying file /oracle/10gASInfra/opmn/logs/ipm.log to /oracle/10gASInfra/cfgtoollogs/ipm.log
Number of file(s) copied is 3
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant-start OCA Instance
Start Processing
configuration tool Register DCM Plugins with EM....
Preparing for copying /oracle/10gASInfra/dcm/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/dcm/logs/*
Adding the file /oracle/10gASInfra/dcm/logs/dcmctl_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Register DCM Plugins with EM
Start Processing configuration tool InfraApplication Cluster Configuration Assistant step -1....
Preparing for copying /oracle/10gASInfra/config/infratool_create_cluster.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_create_cluster.log
Adding the file /oracle/10gASInfra/config/infratool_create_cluster.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_create_cluster.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool InfraApplication Cluster Configuration Assistant step -1
Start Processing configuration tool InfraApplication Cluster Configuration Assistant step -2....
Preparing for copying /oracle/10gASInfra/config/infratool_create_cluster.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_create_cluster.log
Adding the file /oracle/10gASInfra/config/infratool_create_cluster.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_create_cluster.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool InfraApplication Cluster Configuration Assistant step -2
Start Processing configuration tool
InfraApplication Cluster Configuration Assistant step -3....
Preparing for copying /oracle/10gASInfra/config/infratool_create_cluster.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_create_cluster.log
Adding the file /oracle/10gASInfra/config/infratool_create_cluster.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_create_cluster.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool InfraApplication Cluster Configuration Assistant step -3
Start Processing configuration tool Infrastructure
Upgrade Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/config/infratool_infra_upgrade.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_infra_upgrade.log
Adding the file /oracle/10gASInfra/config/infratool_infra_upgrade.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_infra_upgrade.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Infrastructure Upgrade Configuration Assistant
Start Processing configuration tool Use Metadata Configuration Assistant....
Preparing for copying /oracle/10gASInfra/config/infratool_midtier_upgrade.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool_midtier_upgrade.log
Adding the file /oracle/10gASInfra/config/infratool_midtier_upgrade.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/config/infratool_midtier_upgrade.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Use Metadata Configuration Assistant
Start Processing configuration tool Oracle Certification Authority....
Preparing for copying /oracle/10gASInfra/oca/logs/install.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/oca/logs/install.log
Adding the file /oracle/10gASInfra/oca/logs/install.log from the file path expanding...
WARN: Source file /oracle/10gASInfra/oca/logs/install.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Oracle Certification Authority
Start Processing configuration tool Use Infrastructure Configuration Assistant....
Preparing for copying /oracle/10gASInfra/config/infratool*.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/config/infratool*.log
WARN: Could not find any file matching the expression /oracle/10gASInfra/config/infratool*.log. Nothing will be copied.
End Processing configuration tool Use Infrastructure Configuration Assistant
Start Processing configuration tool OracleAS Webcache Configuration Assistant....
Preparing for copying /oracle/10gASInfra/webcache/log/log.xml to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/webcache/log/log.xml
Adding the file /oracle/10gASInfra/webcache/log/log.xml from the file path expanding...
WARN: Source file /oracle/10gASInfra/webcache/log/log.xml could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool OracleAS Webcache
Configuration Assistant
Start Processing configuration tool Portal Configuration Assistant....
Preparing for copying /oracle/10gASInfra/assistants/opca/*.log to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/assistants/opca/*.log
WARN: Could not find any file matching the expression /oracle/10gASInfra/assistants/opca/*.log. Nothing will be copied.
End Processing configuration tool Portal Configuration Assistant
Start Processing configuration tool Discoverer Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/discoverer/config/discoconfig5.properties to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/discoverer/config/discoconfig5.properties
Adding the file /oracle/10gASInfra/discoverer/config/discoconfig5.properties from the file path expanding...
WARN: Source file /oracle/10gASInfra/discoverer/config/discoconfig5.properties could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Discoverer Configuration Assistant
Start Processing configuration tool OracleAS Wireless Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/wireless/logs/wireless_CA.out to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/wireless/logs/wireless_CA.out
Adding the file /oracle/10gASInfra/wireless/logs/wireless_CA.out from the file path expanding...
WARN: Source file /oracle/10gASInfra/wireless/logs/wireless_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool OracleAS Wireless Configuration Assistant
Start Processing configuration tool OracleAS Wireless SDK Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/wireless/logs/wireless_CA.out to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/wireless/logs/wireless_CA.out
Adding the file /oracle/10gASInfra/wireless/logs/wireless_CA.out from the file path expanding...
WARN: Source file /oracle/10gASInfra/wireless/logs/wireless_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool OracleAS Wireless SDK Configuration Assistant
Start Processing configuration tool OPMN Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/opmn/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/opmn/logs/*
Adding the file /oracle/10gASInfra/opmn/logs/opmn.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ons.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/ipm.log from the file path expanding...
Adding the file /oracle/10gASInfra/opmn/logs/states from the file path expanding...
Completed copying file /oracle/10gASInfra/opmn/logs/opmn.log to /oracle/10gASInfra/cfgtoollogs/opmn.log
Completed copying file /oracle/10gASInfra/opmn/logs/ons.log to /oracle/10gASInfra/cfgtoollogs/ons.log
Completed copying file /oracle/10gASInfra/opmn/logs/ipm.log to /oracle/10gASInfra/cfgtoollogs/ipm.log
Number of file(s) copied is 3
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant
Start Processing configuration tool
Enterprise manager Website Configuration Assistant ....
Preparing for copying /oracle/10gASInfra/sysman/log/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/sysman/log/*
WARN: Could not find any file matching the expression /oracle/10gASInfra/sysman/log/*. Nothing will be copied.
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying /oracle/10gASInfra/dcm/logs/* to /oracle/10gASInfra/cfgtoollogs
Expanding source path /oracle/10gASInfra/dcm/logs/*
Adding the file /oracle/10gASInfra/dcm/logs/dcmctl_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant

DBCA error

I installed Oracle 9i Enterprise Edition Database on OpenUNIX 8 (SCO UnixWare 7.1.3 + Caldera OpenLinux 3.1.1 RPM). Net Assistant was completed automatically after the installation while the next tool (Database Configuration Assistant) didn't run correctly, so I had to complete the instalation without creating any database. Runing that tool after (bash-2.05$ ./dbca )shows the same error message, as below :
SIGSEGV 11* segmentation violation
stackbase=0x450b8000, stackpointer=0x450b75b0

I have the same problem when installing oracle 8.1.7 on sco unixware 7.1.3. Have you solved the problem?

Install RAC 11g2 : DBCA error with listener

I get this error while create database with DBCA in RAC 11g2 installation.
ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132: syntax error or unresolved network name 'rac-scan.edu.vn:1521'
My scan listener :
[oracle@vm01 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
[oracle@vm01 admin]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node vm02
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node vm01
[oracle@vm01 admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node vm02
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node vm01
[oracle@vm01 admin]$ srvctl config scan
SCAN name: rac-scan.edu.vn, Network: 1/10.10.10.0/255.255.255.0/eth2
SCAN VIP name: scan1, IP: /rac-scan.edu.vn/10.10.10.250
SCAN VIP name: scan2, IP: /rac-scan.edu.vn/10.10.10.251
So thanks
Chuong

I've had a very similar problem with DBCA and creation of an 11.2.0.3 database and this ORA-00119:Invalid specification for system parameter REMOTE_LISTENER ORA-00132: syntax error or unresolved network name 'orapscan:1521'.
The solution to my problem was that on the host (a production host) that I was trying to execute DBCA from if I did a 'tnsping orapscan' it did not resolve.
On our development host a 'tnsping oradscan' (oradscan is the scan equivalent in dev for our production equivalent orapscan) it resolves ok.
ie.
13:22:15[oracle@euxq10 [eu11d] ~]$tnsping oradscan
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 08-APR-2013 13:22:20
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/apps/oracle/network/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=10.3.55.34)(POR..... etc.....
In this case, it is resolved from EZCONNECT.
This then led us to look at the sqlnet.ora on both our development and production environments, and this is where we found a difference.
In our development environment in sqlnet.ora, we had -
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
But in our production environment in sqlnet.ora we had -
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES)
Thus when we changed our sqlnet.ora in our production environment to include EZCONNECT - ie.
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
Then when we retried the DBCA create, we did not receive this ORA-00119 / ORA-00132 error with parameter REMOTE_LISTENER.
Anyway, this was the solution to my problem. Hope it helps others.
Regards,
Roger

Clone Error 11g

Hi,
Oracle 11g
OS Windows
I am trying to clone.Database is starting with nomount but during control file creation is occuring error Find below.
QL> @D:\clone.sql;
CREATE CONTROLFILE SET DATABASE "clone" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'D:\APP\ADMINISTRATOR\ORADATA\ORCL\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
Kindly suggest.
Thanks
Edited by: user13382934 on Nov 4, 2010 10:16 AM

Hi All,
The clone is ready now it is prepared using cold backup from PROD. I have some doubts ,after making clone as I did .The doubt is if I am taking backup for PROD on daily basis using export full command, My clone is prepared on example 01 OCT and I need to restore on 10 OCT from recent backup(example 9th OCT) on clone instance. On this point what I have to perform to restore using import command?
Do after full importing on clone database will be exactly same as it is as PROD?
Example In Prod there are created new tablespace, new user etc on this point do I have to create new tablespace, new user on clone instance first then import ?
If nothing is created on PROD after making clone then no need to perform anything just full import on clone instance and it will be same as PROD?
Thanks

Dbca error - HPUX - 10.2.0.4

Hi all,
Got following error while running dbca on HP-UX, Oracle release 10gR2 (10.2.04), any help is appreciated,
<START>
UnsatisfiedLinkError exception loading native library: njni10
Exception in thread "main" java.lang.UnsatisfiedLinkError: get
at oracle.net.common.NetGetEnv.get(Native Method)
at oracle.net.config.Config.getNetDir(Unknown Source)
at oracle.net.config.Config.initConfig(Unknown Source)
at oracle.net.config.Config.<init>(Unknown Source)
at oracle.sysman.assistants.util.NetworkUtils.<init>(NetworkUtils.java:225)
at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:264)
at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:686)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:205)
at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:160)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:94)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:180)
<END>
Thanks & Regards,

Srini and all,
I tried both the solutions and no luck yet. I figured out the memory according to ML Doc ID:395891.1 but when I give the command,
setmemwindow -i 22 ./dbca
nothing happens.
Just to let you know that I am logging on the server with Reflection.
Please let me know if anybody else has any ideas. In the meantime I will do some more research and keep the thread updated, if I found anything.
Any help is greatly required and appreciated
Regards, OCPDBA

Dbca error 11g

Similar Messages

Maybe you are looking for