DBCA in silent mode gives "template does not exist" error

We successfully created a database using the DBCA in silent mode like this:
dbca -silent -responseFile dbca.rspThen, attempting to create a second database on the same machine with a slightly different response file, we get the following error:
dbca -silent -responseFile dbca.rsp2
Template General Purpose does not exist. Please specify an existing template for database creation.The "General Purpose" template was used in the original database creation. It does exist. No logfile is created. Any ideas what could be causing this?

We never did get to the bottom of the mysterious "template does not exist" error, but went with a solution that is better:
1. we used the already-existing database to create a clone template:
dbca -silent -createCloneTemplate -sourceDB OLD_SID -sysDBAUserName sys
-sysDBAPassword XXXX -templateName old_sid_copy.dbc
-maintainFileLocations true
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates (Note the use of the -maintainFileLocations switch)
2. edited the template file, replacing all instances of OLD_SID with NEW_SID
/local/opt/oracle/product/10.2.0/assistants/dbca/templates/old_sid_copy.dbc
3. create the clone using the new template
dbca -silent -createDatabase -templateName old_sid_copy.dbc
-gdbname NEW_SID.MYHOST.COM -sid NEW_SID
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates
-responseFile NO_VALUE -characterset WE8ISO8859P1

Similar Messages

9.3.1 Migration Utility gives "Project does not exists" error in log

In preparation for using Hyperion Reporting and Analysis 9.3.1, I have installed the following on a Linux test server:
--Oracle App Server 10.1.3
--Oracle Database 10g XE
--Hyperion shared services 9.3.1
--Hyperion UI Services 9.3.1
--Hyperion SQR Production Reporting 9.3.1
--Hyperion Reporting and Analysis, Financial Reporting 9.3.1
Everything is up and running and I created a new user account in Shared Services to administer the system, and attempted to give it full access by provisioning it with all the available roles. I received an error message stating
"+OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.+"
I'm investigating that now, but the roles seemed to be assigned to the user anyway.
When attempting to migrate from HPSu 8.5.2 to Reporting and Analysis 9.3.1 using the 9.3.1 Linux x86 Migration Utility (V11333-01 from edelivery.oracle.com), I get the following error message in a test migration:
The migration process has been failed on 'User Defined Roles' migration step*
I set the log level to debug and looked it over and here are the error details:
+\[09 16 10:49:29,080] \[ERROR ] The migration process has been failed on 'User Defined Roles' migration step+
+\[09 16 10:49:29,081] \[ERROR ] com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.+
com.hyperion.pmt.migrator.common.CommonException
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:864)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.startMigration(MigrationManagerImpl.java:751)
at com.hyperion.pmt.migrator.userprovision.ui.panels.MigrationPanel$ProcessRunner.run(MigrationPanel.java:304)
Caused by: com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.
at com.hyperion.interop.lib.helper.AdminProjectHelper.getProjectNameByID(Unknown Source)
at com.hyperion.interop.lib.CMSClient.getProjectNameByID(Unknown Source)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.getDefaultGroupBundle(MigrationManagerImpl.java:824)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:861)
+... 2 more+
We've only one user-defined role in the source system that I don't think is giving us this issue, it is inactivated and "User Roles" was not one of the selected objects to migrate.
I would like to try taking the role completely out of the source system if possible, preferably through SQL applied to the V8 tables or through the SDK.
The error looks like it lies in the migration task following the user role provisioning, doAssignDefaultGroup* and is caused by getProjectNameByID*
The steps I have taken (for sanity sake) so far are:
--I've removed all associations with this user defined role in the source system (users, groups, and roles) using the administrative interface on the web.
--I've unchecked 'User Defined Roles' on the list objects to migrate from the source to target systems in the Migration Utility, but I still get the error.
It looks like it is trying to provision a user defined role in the target system, but it is not finding a default project by the id in the error message.
Are there any Shared Services steps in the target system that need to be taken besides creating a manager type user to use as a log in for the Migration Tool?

I turned on the jsp debug init-param for the system for more information about the error. I get the following:
Request URI:/interop/jsp/css/CSSTemplate.jsp
Exception:
OracleJSP:oracle.jsp.parse.JspParseException: /jsp/css/provisionSummary.jsp: Line # 119, <bean:define id="appId" name="appName" property="key"/>
Error: Tag attempted to define a bean which already exists: appId
When I attempt to provision the user I created for administrative purposes, Ialso see the following:
--from the file SharedServices_Metadata.log I see the error:
+2009-09-18 15:55:32,399 \[AJPRequestHandler-HTTPThreadGroup-6\] ERROR com.hyperion.eie.common.cms.CMSFacade - org.apache.slide.structure.ObjectNotFoundException: No object found at /users/admin+
--from SharedServices_Admin.log
+2009-09-17 14:49:20,583 \[Thread-13\] ERROR com.hyperion.cas.server.CASAppRegistrationHandler.loadApplicationsFromCMS(CASAppRegistrationHandler.java:430) - AuthorizationException occured when loading applications : Refer log in debug mode for details+
How does one set these logs into debug mode ?

Template interpretation failed. Template does not exist.

Hi Gurus,
We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
Can anyone please confirm me..whether I'm right or anything need to be corrected ...
Thank you in advance.
Regards
Naren

Thanks.
Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
As per Config guide It happned after doing below steps .....
SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
Note
You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
3.1 Portal-Independent Navigation Frame and Inbox
3.1.1 Portal-Independent Navigation Frame Configuration
Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
(SAP SRM) applications without using SAP NetWeaver Portal.
Procedure
To configure the portal-independent navigation frame, proceed as follows:
1. In Customizing for SAP Supplier Relationship Management, define the following settings:
n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
Relationship Management under SRM Server Technical Basic Settings Portal-Independent
Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
the connection must end with one of the following character sequences:
l For a non-secure connection, use_HTTP.
Example: SAP_ERP_HTTP.
l For a secure connection, use _HTTPS.
Example: SAP_ERP_HTTPS.
n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
Client (NWBC) for HTML.
Thnaks

Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is empty

Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Item does not exist error when updating item

Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik

Why an "ORA-01006: bind variable does not exist" error when no dynamic SQL?

Hi all,
While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
Error report:
ORA-01006: bind variable does not exist
01006. 00000 - "bind variable does not exist"
*Cause:
*Action:
After commenting out the new chunk of code that caused the error, the error persisted.
After deleting the new code, the error went away.
What the heck!?!? If you have any ideas, please lay 'em on me.
Thanks so much,
Kim
P.S. It's a few hundred lines of code, so I didn't append it to this post and I don't see how to attach a file.

Let's review a few facts:
1. You post a question in the sql developer forum that has no apparent relation to sql developer. You could confirm this by doing the test using sql*plus or some other tool.
2. You provide NO information about what database you are even using. The only clue is an ORA -xxx message that means SOME version of Oracle is involved.
3. You provide NO information about what the four digit version of Oracle DB is being used.
4. You provide NO information about what the code in general or what that specific section of the code is even doing. The code could be doing literally anything that Oracle is capable of doing.
That's a bit like calling a mechanic you don't know, telling them your car is making a funny noise and asking them what the problem with your car is.
>
While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
Error report:
ORA-01006: bind variable does not exist
01006. 00000 - "bind variable does not exist"
*Cause:
*Action:
The error gives no indication of where the error occurred in the code.
>
Your first clue that your troubleshooting method is seriously flawed is when you make statements that aren't supported by any evidence at all but appear to be nothing but your opinion.
Your second clue is when those statements appear to directly contradict what Oracle is telling you.
I'm talking about these two statements you make; which you state as if they were universal truths
>
nothing I'm doing has anything to do with dynamic SQL
(which is what 01006 is supposedly about).
>
If thoe were true then your 'unstated' conclusion appears to be that Oracle is wrong in saying 'bind variable does not exist'
Sorry - but I would place my money on Oracle.
I'm sure the above may sound harsh - it is intended to be. My four major rules (there are more) when troubleshooting Oracle problems.
1. Assume that Oracle is CORRECT when it tells you there is a problem.
2. Assume that you are WRONG if your opinion conflicts with what Oracle is telling you - see rule #1.
3. Don't make ANY other assumptions. You can form hypotheses but don't state them as facts until they are proven.
4. Your 'opinion' is only useful to the extent that it can help you form meaningful hypotheses - see rule #3.
>
To reiterate, there is no dynamic SQL in the code.
>
To reiterate - if, as you state, that error relates to dynamic SQL and bind variables then it can not be disputed that:
ORACLE DOESN'T AGREE WITH YOU!
So let's try it my way and hypothesize that Oracle is correct (see rule #1 above).
Then by definition this statement by Oracle is correct
>
ORA-01006: bind variable does not exist
>
And that should immediately raise this question:
1. where might there be a bind variable that does not exist?
which leads to a prerequisite question:
2. where are ALL of the bind variables that might be being used?
Question #2 is where you need to start your search. Here are at least five possibilities (there are more)
1. your code - this should be easiest to check and you state that your 'anonymous' block does not have any.
2. a table trigger - triggers that use the :NEW, :OLD or :PARENT pseudocolumns. Those psuedocolumns are BIND variables and the trigger code that uses them is, by definition, dynamic sql.
3. a pl/sql package/function/procedure - any of these might be being called from trigger code or a view that is involved in the transaction. Any of these could take a parameter and/or use bind variables and cause your problem if that bind variable does 'not exist'.
4. a functional index - can also trigger code from #3 above
5. an audit trigger that logs the audit activity that your user or your code is performing. This code could be trying to use a SYS_CONTEXT environment variable that has not been created and cause a 'bind variable does not exist' error.
See rule #1 - Oracle is CORRECT. Until you have identified and examined ALL of the code (not just your anonymous block) being executed and ruled it out you should continue with the hypotheses that Oracle is CORRECT.
In the (extremely) unlikely event that you can show that Oracle is NOT correct you should file a SOR with Oracle.

ESS Salary statemenr: Form Does not exist error

Hi Experts,
As mentioned in may threads, I have changed the form name for salary statement to the custom form name in SPRO- --> HRFOR
But the portal displays "Form does not exist" error. Could not find a solution in any existing post on sdn.
Urgent help needed.
Thanks,
Shobhit

Hi,
If your payslip form is desinged in PE51, then follow these steps.
Employee Self-Service-> Service-Specific Settings-> Benefits and Payment-> Salary Statement-> Form Using HR Forms Editor (PE51)
a. Edit Feature HRFOR: Maintain the constant $CEDT$ for MOLGA 40 RCLAS +01(03).
b. Enter Payslip variant in EDTIN feature
c. Maintain smartform name in EDPDF
If your payslip form is designed in HRFORMS, then enter the form name in HRFOR feature and enter the variant in EDTIN.
Cheers!!
Ashutosh

"SAP_PAYSLIP_US does not exist" error in Salary statement iView of ESS

Hi all,
We have SAP EP7.0 (NW 2004s) with the ESS business package for MySAPERP 2005.Most of our iViews of the business package are working fine,but some are givig problems.
When we try to launch the Salary Statement iView under BEnefits and Payments Workset we get the "SAP_PAYSLIP_US does not exist" error.
The form name SAP_PAYSLIP_US is active and also we have specified the form name in the SPRO settings.
If we change the form name (for e.g.UF01) then the error displayed is "UF01 does not exist".
Can anyone point out as to what the problem is.
Is there any settings we are missing?
Thanks,
Pradeep Shetty

Hi To all!
The Form SAP_TIMESLIP doesn't exist. The correct form to use in the feature HRFOR is SAP_TIM_99_0001 or SAP_TIM_99_0002.
Activate the form in transaction HRFORMS.
SAP didn't release the form SAP_TIMESLIP.
Hope this information is usefull.
Sónia

Package does not exist error-message

When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
Has anyone encountered this or any ideas?
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.* ;
import java.io.* ;
import java.sql.* ;
import com.ericsson.snf.mps.mppapi.mtlr.*;
The error messages come from the 'import com.ericsson.snf.........' statement.
I am trying to integrate ericsson software, into my application.
Thanks,
java-mobile-user

That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

Time series does not exist, Error in Source System

Hi friends,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

Need urgent help :'The requested resource does not exist error'

Hi All,
I am getting 'The requested resource does not exist error' when trying to acess http://machinename:50000/irj
Even when i access http://machinename:50000, i get the same 'The root directory does not exist' error. I checked in visual admin, there is no other application deployed except my application.
Any clues? Pls help
thanks
bhawna

HI ,
Did succeed to solve your problem. I am running into same problem.
Any help is welcome.
Thank u very much.

RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Hi All,
I am getting the error "RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAILURE" when planning sequence (IP) is executed. Can some one help me please asap.
Regards
Kiran

Hi,
Please go to sm59 and check if the RFC connection exists for this source system. If its there, please double click on it and on next screen, go to Menu bar and click on Test-> Connection and then test -> authorisation.
If you get any error, thats the reason. If you dont find the RFC at all, thats the reason why you got error.
You may also check WE20 for partner profile, whether it exists or not.

"Scenario does not exist"error

Hi All,
R/3 system is upgraded with HRSP70 and since then we have issue in MSS. We get error scenario does not exist for Reporting tab in portal . Also if we manually test service HRWPC_FC_EXEC we get "Scenario does not exist" error. Could anyone please help where and how to maintain scenarios?
And explain what is exactly a scenario ?Please treat this as urgent as we are having widespread error due to this.
Regards,
Jalpa Shukla

Please check SAP Note No. 969401 in this regard.
Hope this helps.
Best Regards

File does not exists error

I am using OAS 10g. Looking through HTTP_Server logs, I see the following error repeating very often. I am a Forms developer unfamiliar with Java. Do you have ideas about this error or any suggestions as to what steps I should take:
[Fri Jun 19 17:06:58 2009] [error] [client 123.123.123.123] [ecid: 1245445618:456.456.456.45:4224:4256:265,0] File does not exist: c:/oracle/ora904astest/forms90/java/java/awt/KeyboardFocusManager.class
[Fri Jun 19 17:06:59 2009] [error] [client 123.123.123.123] [ecid: 1245445619:456.456.456.45:4224:5208:169,0] File does not exist: c:/oracle/ora904astest/forms90/java/java/awt/KeyboardFocusManager.class
[Fri Jun 19 17:07:00 2009] [error] [client 123.123.123.123] [ecid: 1245445620:456.456.456.45:4224:5464:243,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/forms/registry/default.dat
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:1308:275,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:4784:315,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:4388:254,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
Thank you.

Refer following note on MetaLink:
ID: 238979.1 How to Prevent "File does not exist" Errors in the error_log?
Thanks
Shail

DBCA in silent mode gives "template does not exist" error

Similar Messages

Maybe you are looking for