DBConsole service can't start

when I start DBConsole , its giving the following error (Window based services).
?Windows could not start the OracleDBConsolertlg on local computer. For more information, please review the system event log. If this is a non-Microsoft service, contact the service vendor or refer to service specific error code 2.
Can anyone help me about the resolution?
Sharmi

Happens to me all the time - when I have messed up the networking on the Windows box. The [my] problem is almost always traced back to the route setup in the Windows config. I typically use 2 network adapters. One will be set to 'extranet' and the other for 'intranet'. The problem is usually that the network route sends the request to the extranet even when I want the request to stay local. My solution is usually to disable the adapter that goes to the outside world, start up the DB Console, enable the adapter.
That said - this is NOT the correct forum for this kind of question. Don't know whether you missed it, but the title of the forum includes the message " (Do Not Post Product-Related Questions Here)"

Similar Messages

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Essbase Service Can't Start

Hi there,
I am working under Hyperion 11.1.1 and I have error.
I want to start Essbase service in order to use MAXL / Essmsh but the Essbase service can't start. The service starts manually as usual and path to executable pointed to C:\Hyperion\products\Essbase\EssbaseServer\bin\ESSBASE.exe
when I tried to find the folder and run essbase.exe the error shows that the service name is wrong (Hypservice_1) and not found.
Actually at Windows service, display name is "Hyperion Essbase Services 11.1.1 - hypservice_1"
Anyone has idea about that problem? Please let me know, thanks.

I couldn't capture the windows when I run startessbase.cmd, it runs very fast and disappeared afterwards.
What can I find on essbase.log is something like this repeatedly:
[Thu Oct 20 14:19:56 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Thu Oct 20 14:19:56 2011]Local/ESSBASE0///Info(1051198)
Single Sign-On Initialization Failed !
[Thu Oct 20 14:19:56 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 20 14:19:57 2011]Local/ESSBASE0///Error(1051527)
In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
[Thu Oct 20 14:20:02 2011]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 20 14:20:02 2011]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Thu Oct 20 14:20:04 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Thu Oct 20 14:20:04 2011]Local/ESSBASE0///Info(1051198)
Single Sign-On Initialization Failed !
[Thu Oct 20 14:20:04 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 20 14:20:04 2011]Local/ESSBASE0///Error(1051527)
In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
[Thu Oct 20 14:21:59 2011]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 20 14:21:59 2011]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Thu Oct 20 14:22:01 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]

When I try to download itunes i get a message that the services can not start and I may not have enough privileges. What is wrong?

When I try downloading itunes it stops with a message that says the mobile service can not start because I may not have enough privileges. What do I need to reset?

Hello, bradhannan.
This sounds like a possible permissions issue. Try these steps. Uninstall iTunes and all of it's components. Next, download the newest version of iTunes and save it to your desktop rather than selecting run. Right click on the installer package and run as administrator. I have included a couple articles that covers how to uninstall iTunes and all of it's components.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Regards,
Jason H.

RAC service can't start after upgrading to 10.2.0.4

Hi All,
After upgrading to 10.2.0.4 from 10.2.01 (linux32 with 2 nodes), I am experiencing the following:
1. The rac service (created after the database was created, not the default service) can not start after the database started with "prkp-1030" error.
2.The service somehow is online and available from the "lsnrctl status" command. Further verified that the users could connect to the rac via that service.
3. The "crs_stat -t" command and the "srvctl status service..." also show the service is not running.
Have anyone seen this problem before? what is need to be done to make it consistent.
Thanks,
TN

I found something that might cause this problem.
When I shut down everything (service, db, asm, nodeapps), and start them back on one by one in the opposite order (nodeapps, asm, database). I found out that the service is somehow get restarted when I start the database (when I have yet started the service itself). the lsnrctl status shows that the service is up. but the crs_stat shows the service is down.
My question is that why the service is tied up with the database startup (using srvctl start database -d database_name)?

My vmware horizon workspae service can not start

Hi i have installd VMware-Workspace-Desktop-2.1.0-2091556.exe on my windows 7 64bit but now vmware horizon workspace service can not start even i start it manually but it will be stop rapidly i have attached pics

The client started, it's the authentication screen that is not working for you. Can we get the diagnostics information from your Windows machine where you are seeing this failure?

Oracle DBconsole service does not start

Hi,
Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
Thanks for your help.

Thank you Madrid. I resolved the problem. I had this :
set ORACLE_SID=ORCL2
C:\Documents and Settings\> emctl stop dbconsole
OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
can anyone answer please ?
Message was edited by:
user522961
Message was edited by:
user522961

Web service can't start in Admin Server

Hello,
I work with a xserve (mac os x server 10.4.9), with a default install of apache 1.3, there is also php4 installed and i've tryed to install php5 with "entropy-php.mpkg".
After I have stop the web service in Admin server and now i want to restart it but it say that it's impossible to start the web service. it say that i have to read http log files. I have read the error_log file into var/log/httpd but the last trace is "caught SIGTERM, shutting down".
Can you help me, please ?
thanks

Sorry for my bad english.
I fix the bug , it wasn't because of Mac os x server but only my install of "entropy-php.mpkg" what put a file into httpd conf directory "/etc/httpd/sites/". By removing this file, the web services can restart.
ouf...
have a good day..

Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj

ISQL*PLUS service can't start

Hello,
I installed Oracle 10g on Windows XP, SQLPlus is OK, but I can't start iSQL*Plus service. Please help me how to fix this problem.
Thks a lot.
Best regards,
Kim Hung

What error message is returned when You try to start it?
Additionaly You can read Metalink note 400812.1 - How to Create iSQL*Plus Service after Software Only Install on Windows Machine
And Metalink note 334695.1 is usefull as well.

OracleXETNSListener service can't start

Hi,
I can't start my OracleXE 10g, there are problems with OracleXETNSListener service.
I found some topics on forum, but nothing help :(.
====================================================
Install folder: D:\oraclexe
====================================================
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = TEB_LAPTOP)(PORT = 1522))
DEFAULT_SERVICE_LISTENER = (XE)
====================================================
tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = TEB_LAPTOP)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
====================================================
sqlnet.ora:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
====================================================
There are no started firewalls
====================================================
Have a static IP address (connection to Internet through local server)
====================================================
When execute the command "lsnrctl stop" receive:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-═╬▀-2007 16:21
:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=TEB_LAPTOP)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
====================================================
When execute the command "lsnrctl start" receive:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-═╬▀-2007 16:22
:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oraclexe\app\oracle\product\10.2.0\server\network\ad
min\listener.ora
Log messages written to D:\oraclexe\app\oracle\product\10.2.0\server\network\log
\listener.log
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PARTIAL=yes)(QUEUESI
ZE=1))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
XTPROC_FOR_XEipc)))
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 38: Filename too long
Listener failed to start. See the error message(s) above...
====================================================
tnsping XE:
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-═╬▀-2
007 16:23:00
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = TEB_LAPT
OP)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12541: TNS:no listener
====================================================
In *.ora tried to change port with 1521 to 1522. Nothing...
====================================================
ORACLE_HOME is empty
====================================================
Thanks to all!

EdStevens wrote:
Sounds like your actual installation of XE failed. What append when you tried to install it?
True. I removed all the Oracle stuff from my machine using this page's instructions ( ORACLE-BASE - Manual Oracle Uninstall ) and then re-install the XE again and now it is working.
Only problem is that when installing I could not give the Oracle Base directory properly.
I gave c:\oracle as the destination direcotry. Then the Oracle Base is taken as that (c:\oracle), BUT
the Oracle Home comes as c:\oracle\app\oracle\product\11.2.0\server.
According to OFA, if c:\oracle is the ORACLE_BASE, then the ORACLE_HOME should be
c:\oracle\product\11.2.0\server_1, but it creates the app\oracle sub-directories beneath the oracle base???
Also, can I install more than 1 oracle XE DB in the same machine? I tried but you only get repair and delete options int eh OUI.
+
Is there a DBCA which comes with XE. I looked around and I can't find one. Am I correct to say the XE does not have a DBCA?

Web Integration Server service can't start in Windows Nt

Hi there,
I just remove my Portal-to-Go 1.0.2 in Windows NT Server, and install the 1.0.1.4.6, but after the installation, in the service in control panel, the service Web Integration Sever can't start, the error message is 2186: the service does not responsing the control function; and when I run the D:\Oracle8\panama\WebIntegration\Server\bin\server.bat the server still not running. the out put of server.bat is enclosed. Any help will be great appreciated.
David
***** Out put of server.bat
D:\>rem echo off
D:\>rem
D:\>rem Copyright (c) 1996-1998, webMethods Inc. All Rights Reserved.
D:\>rem server.bat: Run the B2B Integration Server
D:\>rem
D:\>rem Change SERVDIR and JDKDIR to reflect their locations on your system
D:\>rem CODEDIR should point to the location of the Java service classes
D:\>rem
D:\>rem --- SET THE FOLLOWING LINE TO "true" TO RUN ON Win95 ---
D:\>SET IS95=false
D:\>rem --- RESTRICT VAR CHANGES TO LOCAL BATCH FILE
D:\>if false == false SETLOCAL
D:\>SET SERVDIR=D:\Oracle\panama\WebIntegration\Server
D:\>SET JDKDIR=D:\Oracle\panama\WebIntegration\Server\jvm
D:\>rem --- MUST SET TO ALLOW MULTIPLE RUNS OF SCRIPT ---
D:\>SET LOCAL=N
D:\>rem --- SAVE COPY OF PATH BEFORE SERVER STARTS TO ALLOW LOOPING ---
D:\>SET SLP=D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\>SET SCP=D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\code\classes;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;
D:\>rem --- SET THE FOLLOWING LINE TO "true" USE JVIEW ---
D:\>SET USEJVIEW=false
D:\>rem --- SKIP STUFF 95 BARFS ON ---
D:\>if false == true goto nolocal
D:\>rem -- ALLOW "LOCAL" STARTS WHERE JVM AND BASE CLASSPATH ARE KNOWN
D:\>SET one=
D:\>if not defined one goto nolocal
D:\>rem --- JUMP PAST "UTIL" FUNCTIONS ---
D:\>goto start
D:\>SET PATH=D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\>SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\code\classes;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;;D:\Oracl e\panama\WebIntegration\Server\lib\classes"
D:\>if N == N goto setcp
D:\>if false == false SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes"
D:\>if false == true SET CLASSPATH="C:\WINNT\JAVA\CLASSES\CLASSES.ZIP;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes"
D:\>rem
D:\>rem The server must always start up in it's installation directory
D:\>rem
D:\>if N == N cd "D:\Oracle\panama\WebIntegration\Server"
D:\Oracle\panama\WebIntegration\Server>rem --- UPDATE PATH AND CLASSPATH FOR PACKAGES ---
D:\Oracle\panama\WebIntegration\Server>if false == true goto skippkg
D:\Oracle\panama\WebIntegration\Server>FOR /D %D in (packages\*) do CALL :setpaths %D
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\Default
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\Default\code\libs CALL :setpaths2 packages\Default
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmDemos
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\S erver>if EXIST packages\WmDemos\code\libs CALL :setpaths2 packages\WmDemos
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmDemosNative
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\libs CALL :setpaths2 packages\WmDemosNative
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\classes SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\ WmDemosNative\code\classes
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\classes.zip SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\ WmDemosNative\code\classes;packages\WmDemosNative\code\classes.zip
D:\Oracle\panama\WebIntegration\Server>SET PATH=packages\WmDemosNative\code\libs;D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmRoot
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmRoot\code\libs CALL :setpaths2 packages\WmRoot
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmUtil
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmUtil\code\libs CALL :setpaths2 packages\WmUtil
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>rem --- Win95 IS MISSING NECESSARY "IF" COMMAND ---
D:\Oracle\panama\WebIntegration\Server>if false == true goto jview
D:\Oracle\panama\WebIntegration\Server>if N == Y goto local
D:\Oracle\panama\WebIntegration\Server>SET SCMD="D:\Oracle\panama\WebIntegration\Server\jvm\bin\jre" -ms64M -mx64M -classpath "D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\WmDemosNat ive\code\classes
D:\Oracle\panama\WebIntegration\Server>goto runserver
D:\Oracle\panama\WebIntegration\Server>"D:\Oracle\panama\WebIntegration\Server\jvm\bin\jre" -ms64M -mx64M -classpath "D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\WmDemosNat ive\code\classes watt.app.server.Main
D:\Oracle\panama\WebIntegration\Server>goto done
D:\Oracle\panama\WebIntegration\Server>rem --- IF SERVER WANTS TO LOOP THEN START OVER ---
D:\Oracle\panama\WebIntegration\Server>if ERRORLEVEL 42 goto start
D:\Oracle\panama\WebIntegration\Server>rem --- END OF LOCAL VAR CHANGES ---
D:\Oracle\panama\WebIntegration\Server>if false == false ENDLOCAL
null

Sorry for my bad english.
I fix the bug , it wasn't because of Mac os x server but only my install of "entropy-php.mpkg" what put a file into httpd conf directory "/etc/httpd/sites/". By removing this file, the web services can restart.
ouf...
have a good day..

App-V Client 5 Service can not start Error 575

Good Morning
I have a Problem with the App-V 5.0 Client. When i starting the Service come following Error: Microsoft App-V Client on local Computer can not start. For more Informationen read the Events. Error 575.
Event-ID 7024
The Service"Microsoft App-V Client"
terminated with service-specific error: {Error in Application}
The application failed to
start properly (0x%lx). Click the "OK" button to
exit the application ..
You have a solution?

http://blogs.msdn.com/b/sgern/archive/2013/03/21/10404146.aspx reports a simialr issue (in German), but on an RDS server.
The issue described there is that App-V tries to resolve/access a folder GUID int the registry that isn't there.
In the above scenario, it was the Music Library.
Activating the Music Library (causeng the key to be written) and deactivating it right away solved the issue. Of course *your* GUID/feature might be another one.
(and no, Sebastian does not explain _why_ App-V tries to access your favorite music)
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org

Suddenly the sqlserver express service can't start (2005).

Hi. My sql server express work well but suddenly stop to run. It can connect to the remote database ok but to my local database can not create a connection. On sql log I see:
2013-12-27 16:12:47.67 Server      Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
   Oct 14 2005 00:33:37
   Copyright (c) 1988-2005 Microsoft Corporation
   Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2013-12-27 16:12:47.67 Server      (c) 2005 Microsoft Corporation.
2013-12-27 16:12:47.67 Server      All rights reserved.
2013-12-27 16:12:47.67 Server      Server process ID is 3124.
2013-12-27 16:12:47.67 Server      Logging SQL Server messages in file 'F:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2013-12-27 16:12:47.67 Server      This instance of SQL Server last reported using a process ID of 5964 at 12/27/2013 4:11:52 PM (local) 12/27/2013 12:41:52 PM (UTC). This is an informational message only; no user action is required.
2013-12-27 16:12:47.67 Server      Registry startup parameters:
2013-12-27 16:12:47.67 Server         -d F:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2013-12-27 16:12:47.67 Server         -e F:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2013-12-27 16:12:47.67 Server         -l F:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2013-12-27 16:12:47.68 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2013-12-27 16:12:47.68 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2013-12-27 16:12:48.03 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2013-12-27 16:12:48.03 Server      Database Mirroring Transport is disabled in the endpoint configuration.
2013-12-27 16:12:48.03 spid5s      Starting up database 'master'.
2013-12-27 16:12:48.12 spid5s      SQL Trace ID 1 was started by login "sa".
2013-12-27 16:12:48.14 spid5s      Starting up database 'mssqlsystemresource'.
2013-12-27 16:12:48.32 spid5s      Error: 15297, Severity: 16, State: 1.
2013-12-27 16:12:48.32 spid5s      The certificate, asymmetric key, or private key data is invalid.
2013-12-27 16:12:48.32 spid5s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Then I saw:
1- VIA is disable which is ok
2- My disk space is ok
3- My disk are all fat32
4- I restart windows management instrument but still does not work.
5- Even I reinstall sql server. In the last part of installation it can not run sql server. I really can not format my system. Any help?
really appreciate you helps

The issues seems to be related to certificates, but don't think we are using certificates for SQL. You can try the below steps:
1) Go to ADD OR REMOVE programs and remove all the third party application (which ever is possible) like tookbar etc.
2) Restart the box and try to start the SQL if it still fails move to step 3
3) Verify the below registry hive and modify it accordingly.
NOTE:- Take a back of the registry hive before making any change
To backup the hive:
--Right click on the hive "HKEY_LM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Window"
--Select EXPORT and provide a valid location for backup.
Change the value of LoadAppInit_DLLs to 0 in Reg path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows
Keep the value of AppInit_DLLs blank in Reg path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows
4) Restart the box and try to start the SQL
5) Verify the below registry hive and make sure the CERTIFICATE is set to blank
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.2\MSSQLServer\SuperSocketNetLib
You can also use the below tool to troubleshoot the issue:
Process Monitor v3.05
http://technet.microsoft.com/en-in/sysinternals/bb896645.aspx

Vista-windows wireless service can't start......

Hi I have 2 XP desktops and a Vista Home laptop all sharing internet through a lynksys wireless router for weeks. I've had no problems untill a couple days ago, the Vista laptop suddenly couldnt see the network let alone connect to it. The WIFI light is on. Ive tried the useless repair connection button but it says "windows wireless service is not running on this computer" so i click repair only to be told it cant fix the problem. Is ther a way to start the service? I cant find it in services.mcs or msconfig. I ran sfc /scannow and it said there were errors but they couldnt be fixed. Ive tried everything and called Dell tech support but they say it has to be an OS error and all i can do is backup and reinstall the whole OS but I would prefer not to. Any ideas? Please help!!!!!!

Hi again,
As you all had the same problem, I had it too. I got a nasty virus/spyware and my anti-virus didn't got it.
After removing the virus/spyware, and when I wasn't able to use my wireless internet connection became really really frustrating including the fact that no internet resource was available on this issue.
After investigating a little, I tried to restore my windows services to the original state. After typing 'windows vista default services' in Google I found a script that supposed to do what I was needed. That site contained also a description for each windows service, so this way I found out about the wireless service that was shut-down, and that couldn't be started because of a missing dependency (that couldn't be started using the windows software (I forgot the name for it .
So looking at the script (the one for defaulting the state of windows services), and finding the name for that dependency that was stopped by that mallware, I did it a try and it worked.
So, funny thing, I'm not a windows fan ("Long live UNIX"), my expertise with windows is fairy limited, and with a little luck I figured out.
Why I was so stubborn? I had to chat with my girlfriend
Funny thing though is that some one stoled my laptop 1 mo later and I lost my girlfriend too )
Regarding the answer to the question if your computer is still infected.... I have no idea....

DBConsole service can't start

Similar Messages

Maybe you are looking for