Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • Oracle DBconsole service does not start

    Hi,
    Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
    Thanks for your help.

    Thank you Madrid. I resolved the problem. I had this :
    set ORACLE_SID=ORCL2
    C:\Documents and Settings\> emctl stop dbconsole
    OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
    Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
    My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
    can anyone answer please ?
    Message was edited by:
    user522961
    Message was edited by:
    user522961

  • Oracle Service does not start after installation of Domain role

    Hi all,
    here is my setting:
    Windows Server 2008 R2 64bit
    ORACLE ONE 11g
    I installed the database and it was working fine until I installed the domain controller role on this server.
    Finally I needed to uninstall this role again and restarted the server several times during this process.
    Now I can not access the database anymore. Listener starts, then stops.
    database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
    Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
    This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
    And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
    Thanks in advance...
    Meden
    Edited by: user10859969 on 13.01.2012 14:29

    And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
    So the best solution is CTRL-ALT-DEL and start all over again.
    If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
    Sybrand Bakker
    Senior Oracle DBA

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

    Windows DBConsole Service doesn't start after Install OAS F&R-Services
    Hello,
    we have installed:
    WINDOWS Server 2003 with SP 2
    Oracle 10.2.0.1
    OAS F&R Services 10.1.2.0.2
    after Install DBR2 EM / DBConsole did work
    after Install OAS F&R-Service
    the windows-service for DBConsole
    doesn't start, return with an Error Code 2
    see below
    the file named emdbconsole.nohup from output log
    is not to find
    the ias_console does work fine
    OAS F_R-Services do work too
    whats may be wrong ?
    regards
    Norbert
    OracleDBConsoleorclsrvc.log :
    EMDROOT=D:\oracle\product\10.2.0\db_1
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    12/14/09 13:13:08 Start pending...
    12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    12/14/09 13:13:09 Tracking process launch...
    12/14/09 13:13:39 dbconsole exited with retCode 2.
    12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
    Edited by: astramare on Dec 15, 2009 8:43 AM

    Hi,
    1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
    cd %ORACLE_HOME%\bin
    emctl stop dbconsole
    2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
    Change line from:
    tracelevel.main=WARN
    To
    tracelevel.main=DEBUG
    Decomment this line, so that the line becomes :
    EMAGENT_PERL_TRACE_LEVEL=DEBUG
    3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
    Change line from:
    log4j.rootCategory=WARN, emlogAppender, emtrcAppender
    To
    log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
    4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
    5. Start the dbconsole and upload the output of each command
    - start the dbconsole: "emctl start dbconsole"
    - issue "emctl clearstate"
    - status the dbconsole: "emctl status dbconsole"
    - check the status of the agent until it comes up: "emctl status agent"
    - force an upload: emctl upload
    6. Check If you are able to view the dbconsole Page & login
    check below logs may be you can see the close error messages to solve the issue.
    <ORACLE_HOME>/<hostname_sid>/sysman/log directory
    <ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
    Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
    Thanks.

  • WebAnalysis does not start after workspace is set on Windows Authentication

    I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
    [WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
    I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
    As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
    It drives me crazy.
    Hopefully its a small matter for you to solve!
    Thanks in advance.

    Dont know exactly whats happened but I presume something went wrong during the update procedure.
    If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

  • OracleOraDb10g_home1TNSListener service does not start

    I am using Win XP. I have installed Oracle 10g.
    OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
    As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
    what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
    Thanks

    Oracle installation was successful.
    after lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
    :29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
    a
    Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
    c-wireless.uc.edu)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    32-bit Windows Error: 49: Unknown error
    Listener failed to start. See the error message(s) above...
    After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
    Thanks.

  • PIA service does not start

    Hi,
    my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
    Do you have any idea for that ?
    In windows Evenetlog it says Event Type:     Warning
    Event Source:     beasvc
    Description:
    peoplesoft-PIA service stopped
    Thank for help.

    after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
    or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
    ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
    even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
    bea logs are under bea DIR.
    Thnks!

  • RAC does not start after trying to move storage

    Hello,
    We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
    RAC does not start after we reformated the storage to RAID 10.
    What we did:
    1) deleted the database
    2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
    3) on both nodes
    - recreated VotingDisk
    node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    - tried to move OCR but was able only on one node:
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
    These return ok for both node1 and node2:
    node1:oracle$ cluvfy stage -post hwos -n node1
    node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "node1"
    Destination Node                      Reachable?
    node1                                 yes
    node2                                 yes
    Result: Node reachability check passed from node "node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name                             Comment
    node2                                 passed
    node1                                 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name                             Status
    node2                                 not running
    node1                                 not running
    Result: Daemon status check failed for "CSS daemon".
    Cluster manager integrity check failed.
    Checking cluster integrity...
    Cluster is divided into 2 partitions.
    Partition 1 consists of the following members:
    Node Name
    node1
    Partition 2 consists of the following members:
    Node Name
    node1
    node2
    Cluster integrity check failed. Cluster is divided into 2 partition(s).
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    WARNING:
    CSS is probably working with a non-clustered, local-only configuration on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    Data integrity check for OCR passed.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 no
    Result: Liveness check failed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "EVM daemon".
    Liveness of all the daemons
    Node Name     CRS daemon                CSS daemon                EVM daemon
    node2         no                        no                        no
    node1         yes                       no                        yes
    Checking CRS health...
    Check: Health of CRS
    Node Name                             CRS OK?
    node1                                 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    Please help.

    Thanks for the answer.
    Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
    You can see that cluster is not healty from cluvfy output.
    When I tried to start crs whith crsctl start crs but:
    - on node2 none of the demons starts (CSS, CRS or EVM)
    - on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
    Problem 2: Cannot change OCR location
    node2:root$ cat /var/opt/oracle/ocr.loc
    +#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
    ocrconfig_loc=/dev/rdsk/c7t30d0s3
    local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    node1:root$ cat /var/opt/oracle/ocr.loc
    ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
    local_only=TRUE
    node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    Problem 3: On node 1 I wrongly issued a command
    node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

  • SSH does not start after reboot

    Hi, I have a problem with my sshd daemon. I have updated my OS, I have changed the .pacnew files and tested service with "systemctl start sshd.service" and it worked good. I have run command "systemctl enable sshd.service" and command executed good. But after reboot service does not start.
    I have run "systemctl status sshd.service" and result is that service is loaded, but in Activa line it is inactive (dead).
    I dont know what is happening, why is it inactive if it is loaded?
    Thank you for you help.

    These are outputs:
    $ systemctl status sshd.service
    * sshd.service -OpenSSH Daemon
    Loaded: loaded (/usr/lib/systemd/system/ssh.service: enabled)
    Active: inactive (dead)
    $ systemctl status sshd.socket
    * sshd.socket
    Loaded: loaded (/usr/lib/systemd/system/ssh.socket: enabled)
    Active: active (listening) since Fri 2014-05-30 09:57:52 COT; 12min ago
    Listen: [::]:22 (Stream)
    Accepted: 0; Connected: 0
    It looks that socket is working, but service isn't. I have reviewed "journalctl -b" and sshd service isn't shown it.
    Last edited by mams827 (2014-05-30 15:25:18)

  • 16 GB x-Fi Style - does not start after charging

    Hi,
    4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
    Can anyone help me?
    Cheers,
    Uli

    Re: 6 GB x-Fi Style - does not start after charging:Just fyi
    I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
    But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • Inventory service does not start 610 failed login

    L.S.
    Netware 6.5, SP6
    ZEN 7.01SP1IR1
    Sybase database
    Standalone server
    My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
    logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
    C1, Inventory service object shows 610: database location policy is not configured (but it is)
    NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
    Any suggestions
    Thomas Roes

    Thomasroes,
    either of these help?
    http://www.novell.com/support/php/se...1%200%20506894
    http://www.novell.com/support/php/se...1%200%20506894
    Shaun Pond

  • Opmn service does not start when try to start Oracle BI Services

    Hi ,
    I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
    When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
    If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
    Any Idea how to fix this one.
    Thanks

    Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

  • Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

    Hello,
    I am having an issue when I start my TMG 2010 machine:
    (*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
    The service "Microsoft Forefront Server Protection for Exchange Registration Service"
    does not start, it is set to "Manual".
    I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
    Thanks in advance.
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

    Hi,
    Have you received any errors in event logs when
    you started the Microsoft Forefront Server Protection for Exchange Registration Service?
    Based on my research,
    Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
    Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
    The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
    down and does not need to be running for transport scanning to occur.
    You can refer to the link below:
    Services
    Best regards,
    Susie

Maybe you are looking for