Dbcopy on whole system

Hi.
I'm about to migrate GW801 on Netware to GW801 on Linux, OES2.
Is about to set up the dbcopy, first pass job.
I get a little confused, reading in differnt locations about dbcopy...
First, can I run dbcopy on the whole system, eg
nwserver/volume/gwsystem/... (where both domains and po:s residre) to
linuxserver/data/gwsystem/...
Or du I have to do the domains and po:s separatly?
There are switches, -d for domains and -p for postoffices. Do you have
to use them, or can I just do dbcopy -m -f source destination?
And in that case, what is the -d and -p good for?
And shall I use -f for first run and the -s for the final run, or
shall I use -i <date> the second time?
And somewhere, -k is in some example... Do I need to use it and why?
Thanks in advance.
/Stefan

Ok...
Doing final pass next friday, and thautgh that it would be handy to do
the whole system, starting today, but then I suppose I have to take
each po and separatly...
I can't user GW Mig Util, because I am moving to a new tree.
GW Mig Util just moves within the same tree.
So, as far as I can see, the path is to use dbcopy, to get tha data
over, and then graft the users into the new tree, matchning the
GW-data to the users there.
Just found, when looking at the dbcopy command, and examples, that
there are many diffent exampels, som e with -p and -d, and some
without.
Some whith -k and some without.
And some with -f and -s, and some with -i <date>.
Confusing...
Looked for best practice :-)
/Stefan
On Thu, 25 Feb 2010 13:22:22 GMT, Joseph Marton
<[email protected]> wrote:
>On Thu, 25 Feb 2010 12:52:30 +0000, Stefan Sjoberg wrote:
>
>> Or du I have to do the domains and po:s separatly?
>
>Yes, you must do each one separately.
>
>> And shall I use -f for first run and the -s for the final run, or shall
>> I use -i <date> the second time?
>
>Look into the GroupWise Server Migration Utility which handles all the
>dbcopy stuff for you automatically.
>
>http://download.novell.com/Download?...d=9hM7xbvDXys~

Similar Messages

IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!

I have tried all the above and nothing seems to work. Any other suggestions?

My MacBook has been "moving to trash" 4 items for a LONG time now. I can't force quit this or stop it in any way. Does anyone know how I can get this to stop, I'm pretty sure its slowing my whole system down because it is constantly working on this.

"Moving Items to Trash" has been up on my desktop for days now. I don't know who to get rid of this and believe its slowing my WHOLE system down. Does anyone know how I can get rid of this, cancel it, forece quit, or anything? HELP!

Try force quitting
Press Command + Option + Esc

My Mac keeps crashing (whole system) when I'm watching videos with Firefox, any idea why?

Ok so I got a new mac and as usual install firefox which is my favorite browser, suddenly my computer started crashing, not just firefox the whole system froze and I had to reboot to make it work again, I didn't know what was happening until I noticed that said crashes happen when I was watching videos on firefox, I tried to use chrome and the issue was gone. So anyone has any idea why this is happening? I really would love to start using firefox again!

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.
If this does not fix the issue, you may need to reinstall Adobe Flash Player on your computer.

Adobe Bridge CS4 Hangs and whole system goes down.

Adobe Bridge CS4 Hangs and whole system goes down.
This is happening when I just finished edition RAW files in ACR and hit DONE, right after that a Bridge hangs, Cannot open Explorer, PC functions are down, cannot start anything, cannot stop Bridge process, cannot properly restart. Only holding power button shuts donw PC forcefylly.
I happens once per 10 edits of RAW files and super annoying.
Pleeeeease help!

No wonder I think this is Bridge.
That is indeed a tempting thought, have you already tried the refresh preferences for Bridge using ctrl key pressed down while restarting Bridge?
But Bridge is very critical in reacting on odd system behavior, so also keep the advice of Station-Two in mind. On a Mac repairing permissions often solves problems, don't know the PC equivalent of this.

Photoshop CS5.1 64-bit crashes whole system when using Wacom Cintiq 13HD

Hello,
I've got a big problem and Wacom Support/Forum wasn't really that helpful at all, so I hope someone here has the answer.
I'm using:
- Windows 7 Premium 64-bit with Service Pack 1
- Intel i7-267OQM 2,2 Ghz CPU
- Nvidia GeForce GT 635M 2GB
- 8GB RAM
- Adobe Photoshop CS5.1 64-bit
- on an ASUS N55S Laptop
My new Wacom Cintiq 13HD runs just fine while just browsing on the internet, with Adobe Illustrator (so far...) and Easy Paint Tool SAI.
But everytime I open my Photoshop it's just some minutes before my system freezes for a second, than blue screen appears und my whole
System crashes down. Every. damn. Time.
I read in the Wacom Forum that more people have this problem, but all suggested solutions by Wacom just don't work.
Here's the link: http://forum.wacom.eu/viewtopic.php?f=3&t=14060
The one thing I didn't try is using the USB Extensions, so I will buy some tomorow and try that too.
But maybe someone has an other idea that could help?
I tried all drivers Wacom has avaible but it still happens. I updated my Adobe Softwares, my BIOS, my graphic card, I restarted countless times,
but nothing seems to work.
Help me, please!

A problem has been detected and windows has been shut down to prevent damage to your computer
REFERENCE_BY_POINTER
If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any new installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x00000018 (0x0000000000000000, 0xFFFFFA800D767920, 0x0000000000000002, 0xFFFFFFFFFFFFFFFF
Collecting data for crash dump…
Initializing disk for crash dump…
Beginning dump of physical memory.
Dumping Physical memory to disk: 35
And I saw that the problem occurs with Asus Laptops and Dell Precision Laptops.
So when I've got time (-> weekend ) I'll set up my desktop pc again and try it there. Maybe it's one of the Asus drivers?

How to set Fonts size in X (whole system)

Hi,
I just bought a 19" monitor, and finally, got my resolution up from 800x600 to find out that i cant get to increse the xterm, Eterm, Firefox, Thunderbird, Gaim and everything to have an acceptable font size...
I mean, is there a way to set the whole system font to some minimal size?
I know how to change in almost every app (have to see if they can remember it, but thats just checking) but there are some i dont... xterm for example...ive looked at the man page, but there are so many options (just with the font subject, i do use several of the other flags) that i couldnt find the one i wanted, just to increase the font size... in Eterm there are 4 pre-set sizes, although i would like to increse it a bit more...
I use Enlightenment, so i dont have any Gnome/KDE control center to do anything...
As usual, any tips are welcome!
Thanks!

I can't provide much help but I can give you a hint: change the DPI globally with... one sec... xfce has some sort of script for settings the DPI globally...
This is the part where the DPI is set
# Those are my settings, change them as appropriate...
# Xft DPI: 96
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
# Xft hinting: 1/0
xrdb -nocpp -merge - << EOF
Xft.dpi: 96
Xft.hinting: 1
Xft.hintstyle: hintmedium
EOF
You might run the command with another DPI setting...
xrdb can be found in /usr/X11R6/bin.
Once again, this is just a thought, I don't know how successful this change will be. Good luck.
You might want to have a look on Google.
IceRAM

Installing x11 without installing the whole system?

I did not install x11 when I installed Tiger on my Mac G5. I have now, via a number of updates, moved to version 10.4.10.
Sadly, when I insert my system install disk it will not let me install x11 without installing the whole system. That is a risky and impractical situation at this point.
Is there a way to install x11 without installing a whole new system?

On the Installer Disc One there is an installer named 'Optional Installs.' You can install the X11 software from that package without reinstalling OS X.

How do i recompile whole system with glibc and gcc from test

I always run testing and hence upgraded all my system a couple of days back. How ever one pprogram i use very often, BLENDER isn't working after i upgraded glibc and gcc4. I have recompiled it but when I get all this errors when i start it http://bbs.archlinux.org/viewtopic.php?t=21825.
I think i need to rcompile all its dependant programs with new glibc and gcc from testing also. Problem is I dentifying which programs to compile is proving a pain as the dependant programs also depend on other programs etc...
Is there a way to recompile my whole system without having to do it one by one?

if you want to compile everything, gentoo is an option. But abs is excellent too.
P.S. Gentoo's compilation drove me out of it

HOW DO I GET MY OLD ITUNES BACK? THE DOWNLOAD MESSED UP MY WHOLE SYSTEM!!!

THE DOWNLOAD MESSED UP MY WHOLE SYSTEM!!!
Before my i-tunes was steller, now i have the **** hard time locating, organising, basically everything.
it's so counter-intuitive how do i get my old i-tunes back?

The Search field in the upper right corner is your friend.
Pull down View > Show Sidebar. This will give you back iTunes 10 functionality.

To reinstall the whole system using the recovry cd

Product: Notebook Toshiba tecra A4.
As the system files were corrupted i tried to recover the whole system. After inserting the recovery cd and copying the files i removed the cd and restart the computer. It comes up to the field where i have to give the computer a name. At this moment it freezes. No reaction at all. I reaptedly tried and waited each time up to 20 to 30 minutes. there is no responce at all. how can i fix this proble?

It is very strange because units and recovery procedure are tested before the units are delivered. If you didn?t change Hardware configuration and you se it without any external devices you should clarify this with your local dealer or with Toshiba authorized service partner directly. Call them and explain the situation.
I don?t know how old your unit is but if there is some serious problem the valid warranty will cover the repair costs.
Sorry pam but I am really out of idea.
Anyway good luck and if you find out what the problem is please let us know because your issue is really individual case on Tecra thread.

What is whole system replacement

I have searched everywhere but I cannot find an explanation as to what this is so could someone please tell me what a whole system replacement is. I only know that it is a data recovery method. I also know that it is used after a disaster occurs in an
organization as part of their disaster recovery plan

Hi,
Yes, based on my knowledge, whole system replacement would mean if huge disaste happened to your system and you could no longer use it, then the whole system would be replaced for you.
In windows 7, you can backup your personal files and create a system image, which can avoid such disaster in case your system is damaged or you upgrade to other windows version.
More information about Windows Backup and Restore, please refer to these articles:
http://windows.microsoft.com/en-us/windows7/what-is-a-system-image
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Andy Altmann
TechNet Community Support

Mac OSX 10.6.8 - The whole system crashes while navigating in Soundcloud

While navigating in soudcloud the whole system crashes and I have to force restart in my laptop (Macbook pro 2010)
Back to Safari?

We're sorry to hear that Firefox is crashing when you open it. Please do the following to give us crash IDs that will help us understand more about the crash.
#'''(OS X 10.6 or previous)''' Click the '''Finder''' icon in the dock. Your home folder will be selected. In the right side of the window, click the Library folder to open it. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.<br>'''(OS X 10.7 or above)''' Click the '''Finder''' icon in the dock. On the menu bar, click the '''Go''' menu, hold down the '''option''' or '''alt''' key and select '''Library'''. A window will open containing your Library folder. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.
#Open the 5 most recent files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5. If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version. Try contacting support using chat and explain your situation to see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
If you did purchase 4.4 then that should be sufficient to use to activate 5.
I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

If I connect one or two ext HD to my MacBook, does TiCaps backup and update the whole system?

I would like to organize my new MacBookPro in this way: an external HD for my photographs, another for my music and documents on internal HD.
I am going to buy Time Capsule to back up the whole system. Might it work? Thank you all.

In addition to Kappy's comments, you will need to insure that the hard drive is formatted correctly to work with Time Machine and the Time Capsule.
That would be Mac OS Extended (Journaled).
Unless the hard drive is specifically sold for use with Macs, it will probably be pre- formatted for Windows, so you will need to use Disk Utility to format the drive before you use it.
Disk Utility is located as follows: Macintosh HD > Applications > Utilities > Disk Utility

Dbcopy on whole system

Similar Messages

Maybe you are looking for