DBID of the cloned database causing issues with Catalog registration

Oracle Version:10.2.0.4
OS : Solaris
Using RMAN DUPLICATE command, we cloned a database. Since the cloned DB retained the same DBID, when i tried to register the newly created DB with RMAN catalog i got an error saying that it is already registered.
How can i set a different DBID for the auxillary DB during duplication?

you can now change the database id using the utility DBNEWID
# Mount the database after a clean shutdown:
SHUTDOWN IMMEDIATE
STARTUP MOUNT
# Invoke the DBNEWID utility (nid) from the command line using a user with SYSDBA privilege. Do not specify a new DBNAME:
nid TARGET=sys/password@TSH3
# Shutdown and open the database with RESETLOGS:
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE OPEN RESETLOGS;
REFERENCE:
http://www.oracle-base.com/articles/9i/DBNEWID.php#DBIDOnly
http://download.oracle.com/docs/cd/B10500_01/server.920/a96652/ch14.htm
Edited by: rajeysh on Jan 12, 2011 12:30 AM

Similar Messages

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

Do you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support

MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)

Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.

Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myClip.filters = [myDropShadowFilter];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myClip.filters = [];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Reader causing issues with dropped underscores in courier new font

When converting a microsoft word document in 2013 or 2007 to a PDF is causing issues with dropped underscores. It only seems to happen in courier new. For instance if I have _someCode, when converting this over to a PDF file I will sometimes see _someCode and sometimes I will see someCode. If I open this file in a different pdf reader then it looks correct 100% of the time. If I copy and paste into another application then the underscore shows. This is a major issue for people putting code into a PDF document as underscores are important and courier new is what we often use.

I love how quick you are to throw Microsoft under the bus. Often it is their fault. In this case I believe you are 100% wrong and absolutely short sighted to ignore this. As I said in my original email, which you apparently missed, I have tried this in multiple PDF viewers and Adobe Reader is the ONLY reader that misses the underscores. Foxit, PDF Exchange and Sumatra all render it perfectly. Adobe reader missed 6 underscores in my document that has 18 underscores. 30% of the time in this document Adobe Reader makes the underscore invisible. And if I switch the zoom to 100% instead of 148% (which is the default for me for some reason) then Adobe Reader misses 7 of them. This doesnt occur in the other readers. Blame Microsoft all you want but the simple fact is that Adobe Reader has issues reading courier new's underscores. It needs to be fixed.

TS1702 Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

8.3 causing issues with safari, "Safari could not open the page because server stopped responding"

Since my upgrade to 8.3 there are several issues with many apps when they are trying to download information.
When I go to Safari and open i.e. msn.com. it tries for over 60 seconds. then I get the error:
Safari could not open the page because server stopped responding.
I have a iPhone 6 plus with 113 gig and 65 gig available
This same issue is causing problems when downloading articles on facebook and instagram app.
We also noticed this same issue on Macbook Air, and iMac, iPad 2, and iPhone 5s.
I also have the Mac Pro without these issues but it is connected by ethernet instead of wireless.
Is wifried back and now plaguing all devices?
I selected mac because, I was tried of all the PC issues with new updates. It seems mac is now lowering its quality to that of PC.
We need a fix for this ASAP!

I have tried resetting my Iphone 6 Plus by holding both the off and select buttom. This did not help.

Installing the HCA Solution Accelerator - issue with SNC Deploy

Hello Everyone -
I am trying to install the HCA Solution Accelerator, and I am having an issue with the "ant deploy" of the Selection and Capture building block.
I have configured the ~snc_1_0\install\ant.properties file, but I think I may have missed a setting somewhere because I am getting this build error:
BUILD FAILED
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\ins tall\build.xml:113: The following error occurred while executing this line:
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\dep loyer\build.xml:107: The following error occurred while executing this line:
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\dep loyer\build.xml:91: Java returned: 1
Does anyone know off-hand what would cause this particular error?
I am relatively confident in the path information that I have set for the j2eejar, junit.jar, lcsdk, lc.install.dir as well as the database driver and connection settings.
I am using a simple turnkey LiveCycle install on a Windows XP OS.
Any suggestions?
Thank you in advance,
Ben Lyons
*I have attached the entire Build output from the command line as a text attachment in case anyone is interested

Well, I found a "fix" to this issue - I am just going to post it here in case anyone else encouters a similar issue.
Apparently, it relates to some sort of error in build.xml file in the ~\snc_1_0\deployer folder.
The particular line that was causing the build to fail was line 91 of this file, which looks like this:
<target name="data-purge">
Line 91 -->            <java classname="com.adobe.solutions.snc.utils.DatabaseExporter" failonerror="false" fork="true"
classpathref="hibernate.setup.path">
                                                <jvmarg value="-Dhibernate.bytecode.provider=javassist"/>
                                    <arg line="create-drop ${dist.dir}/hibernate-test.cfg.xml ${database.driver.class} ${database.connection.url} ${database.username} ${database.password}"/>
                                </java>
                </target>
The "failonerror" attribute is by default set to "true", thus an error was occurring, so the build was set to fail. I changed this to false so that I could build this building block, but doing so has filled me with trepidation that something isn't going to be writing to my database correctly.
Does anyone know what a failure in this segment of this build.xml file means as far as the built SNC building block? (Remember this is the build.xml file in the deployer folder and not the install folder).
In other words - does this mean I should be expecting some kind of lingering error in this building block - and if so, what would that issue most likely be so that I can keep an eye out for it?
-Ben

Pre-n enabler seems to cause issues with lock up/beach ball

I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
UGGHHHHHHH!!!
Peter

I have this same problem. I reported a bug to apple bug id#4990056
Here is what i wrote:
10-Feb-2007 10:36 PM Brooks Roy:
Summary:
I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
Steps to Reproduce:
With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
I do not have any special configuration on my linksys, just MAC based wireless authentication.
When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
Expected Results:
I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
Actual Results:
See above.
Regression:
It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
Notes:
I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

Yosemite upgrade causing issues with Adobe Premiere Elements 10

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Using "Restrict by app" in change query causes issues with Search Results

Hello!
I am hoping some experienced SP admin can help me out. I am having issues with the relevance ranking for my search results web part.
I created a Wiki (OOTB) within a site collection and on the home page of the Wiki I was looking to apply a Search Box and Search Results web part for easy searching. I wanted to ensure the search results were restricted to the scope of the pages within the
wiki. I did the following after adding the 2 web parts:
Entered edit mode for the page
Started to edit the Search Results web part
Under Properties for Search Results clicked on "Change Query"
Navigated to BASICS and clicked "Switch to Quick Mode"
For Select Query, picked "Wiki (System)" option
For Restrict by app, picked "Specify a URL" and input the wiki URL "http://webapp.com/sites/sitecollection/wiki"
Click OK
The web part has 6 automatic results when I hit the page. These are the only 6 pages in my wiki. When I search a word or title of a page, they are not ranked in order or relevance. The ordering is static to what was being shown before the search, but the
keywords I'm searching are bold. With out the taking the steps above, I can easily search these pages and have them ranked appropriately so I'm not too sure what I'm doing wrong.
Other Details
The pages have been crawled and can be searched from anywhere else in SP.
I am only a site collection admin for this specific site collection.
I other than the steps above, I have not made any changes or customization to the search web parts; they are both out of the box SP.
The SP Farm admin we unable to pin point what the root cause is either.

Hi Mikael,
Sorry for the wait, I was unable to post pictures, which i felt would better describe my issue.
Could you output the query template you are ending up with?
If you can tell me how to accomplish this, then I can provide it. Please keep in mind that I am only a site collection admin.
Also, is the ranking/sorting for your webpart set to ranking?
When looking at the web part settings, I didn't see an option to modify the ranking. Unfortunately, some sites in my intranet are down now so I can't even double check. Once it's back up, I will verify this as well.
And how do you know they are ranked incorrectly?
I wanted to display an image showing what I meant by this. As the wiki is down, I'll do my best with words. When I visit the wiki home page, I already have the search and search results web parts there. Without searching anything, the search results
web part displays 6 pages that are available in the wiki. When I search, I expect to see the most relevant result at the top. similar to the following:
*Search result from another section of the intranet site.*
What I receive instead is the same list of wiki pages, in the same order. The most relevant result
is not moved to the top like in the image above, but I can see that the word "rush" is highlighted in bold. I hope this helps.
If you need more of a description, please let me know.
Thank you

Database access issue with EXECUTE AS with impersonated User account

Hello,
I have been facing one issue with EXECUTE AS option in SQL Server 2008 R2. Following is the scenario:
I have two databases TestDB1 and TestDB2 on the same SQL Server instance. I have SQL Admin level permissions on the server. I have written a stored procedure in TestDB1 which will execute the scripts(SELECT Statement) againest the table from TestDB2(using
three part query). To execute the proc from TestDB1 I have used EXECUTE AS option with a user (User1) having select permissions on table from TestDB2. The same proc working fine when I use table from TestDB1 but not working on TestDB2 database. Thorwing error
saying permission denied. I have tried enabling the Ownership chains on both the databases but no luck.
Please help me with the situation here.
Thanks!
Swami A Polnati.

You can also use EXECUTE AS. But then you need to set the database trustworthy, which is not good for security reasons.
Enabling cross-database chaining will not help, since you are using dynamic SQL.
Dan was kind to point you to my article. I recommend that you read it, and learn to embrace the technique with certificates. Yes, it is a long article and I understand that you are impatient to get a solution quickly. However, the article is written from
the point of view that the reader is interested in learning for the future and not only get a solution for the moment. Certificate-signing as a technique is very very useful in several contexts.
The article does also discuss EXECUTE AS, and I discuss in more detail why setting the database trustworthy may be a security risk. (And as long you don't fully understand what I'm talking about, it is a security risk.)
Erland Sommarskog, SQL Server MVP, [email protected]

Exchange upgrade causing issues with internal wiri...

Recently our exchange was upgraded to accommodate bt infinity and at the same time our broadband started playing up. we called bt and I spent 1.5 hours checking and re checking equipment with the call center. Tests were done with the hub at either end of the internal wiring. All the tests were still showing faults even with hub connected to the test socket. They asked me to leave connected for 24 hours while they monitor the line. They promised to call me back which they did not. I called them again the following day to be told I should have left the hub in the test socket which I was not told the previous day. I then had to wait 48 hours while they monitored the line this time in the test socket. All the tests still showed the fault was still there so an engineer called out.
The hub was still in the test socket when engineer arrived and the first thing he did was hook up his test equipment to the test socket and he stated there and then that there was nothing wrong with the line but it had been throttled down. 2 minute phone call and 10 minutes later broadband was back and working perfectly at the test socket. He checked the internal extention and the faults were being thrown up by an extension that has been in place for 10 years +. He stated to me that the new equipment installed in the exchange was more advanced and did more line checks so, although this equipment has been used for Internet with BT for 10 years it is no longer adequate.
All of this I find understandable but the whole way that BT handled this from day 1 of my first call has been appalling. BT openly admitted that the original engineer calls were handled badly and we were credited £9 for the lack of services we had for overly long time. However we are now, 2 months after this, faced with nearly £130 charge for the engineer visit which, looking back with the info I have now, was completely unnecessary. Had the engineers on the phone bothered to reset the line while hub was in the test socket when they were allegedly monitoring it for 48 hours they could have told me there were no faults on their equipment up to the socket and I would have sorted out the internal wiring myself. Even now I can find mention on the Internet of old wiring causing issues but no specific posts to do with exchange upgrades potentially meaning that you need to upgrade internal wiring or mention by the BT call center itself on any of the calls I made to them. All I was told was that everything up to the main box is BT and everything after that mine but since we have made no changes to the wiring we did not think it was applicable until the engineer arrived and told us what he told us then. Yesterday I called Bt again around 9am to dispute the charge. I was informed that because the fault was with our equipment the charge stands. I explained all of the above and I had my case put to the review team. I was told I would get a call back within 4 hours which I did but the phone rang 3 times and as I answered they hung up. I then got a text saying they had tried to call and asked for me to call back which I did to be told that his computer wasn't working. He took my details and said someone would call me back which no one did. I chased again to be told that someone would definitely call me that day. No one did. I chased again today to be told the decision still stands. He has put to final review and promised a call back within 5 days. Until this is resolved direct debit is cancelled. To the letter of the contract we have with BT this is our charge to pay I know that but this could have been avoided if the information was out there on the net, if the original checks done over the phone were done correctly or if I had been told this directly by Bt themselves prior to the engineer being called out which is why I am posting this here so hopefully no one else falls into this trap.

You're right I'm not connected to the BT infinity cabinet. But the BT Infinity cabinets all still route back through the exchange that I am connected to -
http://www.ichilton.co.uk/blog/phones/faster-broadband-bt-infinity-fibre-to-the-cabinet-coming-to-in...
Quote :
What this modem does is connects using VDSL from your home to the VDSL cabinet using the existing copper wires, on to the DSLAM, back to the exchange (over the fibre) and on to BT’s core network.
Your phone line is then still terminated in the original cabinet for telephony (using the cross connect between the old and new cabinets I mentioned above) and back to the exchange over the original multi pair copper cable as it always has done.
http://www.robertos.me.uk/html/fttx.html
Quote:
FTTC involves BT Openreach installing a new street cabinet near to the existing one and linking the two. They run optical fibre from the exchange to the new cabinet then link individual lines from the old cabinet to the new one and back to get VDSL2 onto the copper connection to the premises. The PSTN phone connection continues to operate over the pre-existing cable from the old cabinet to the exchange. It does not get put onto the fibre connection.
In other words the linkage is Exchange >> Old >> DSLAM in New >> Old >> Premises. (Traffic in both directions of course!)
Presumably the equipment in the exchange cannot stay as it is and is upgraded in the process?

Web Logic 10.3 upgrade causes issues with escaped characters in JSP.

We recently upgraded our application servers from Weblogic 9.2 to Weblogic 10.3 and we are having an issue with escaped characters in a JSP code. Here is an example of what we are seeing:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
This code works in Weblogic 9.2. In Weblogic 10.3 we have to make the following changes:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
Thanks, Tom

Hi:
I have resolved the issue with the following in the jspx page.
Put an
<jsp:scriptlet>
response.setContentType(“text/html; charset=UTF-8”);
</jsp:scriptlet>
Inside the <f:view> on the jspx file.
Please refer the link http://www.oracle.com/global/il/support/tip/nlss11061.html for more details. It is helpful.
Thanks & Regards
Sridhar Doki

DBID of the cloned database causing issues with Catalog registration

Similar Messages

Maybe you are looking for