DBIF_DSQL2_DEFAULT_CR_ERROR": APO Interface without monitor log

Hi
V3.x
'Manage' in ODS - IP displays following message: " Request loaded using the APO interface without monitor log". The request is red in ODS and other requests after this request do not activate. Zero records were loaded from flat file.
The request is green in Monitor.
SM37 displays the following message: "ABAP/4 processor: DBIF_DSQL2_DEFAULT_CR_ERROR"
What do I do to rectify this?
Thanks
Cj

Hi
please ignore my previous statement. I've noticed that the IP in the monitor is already green but that te following message is displayed: "Request REQU_49UKKF2TZEX4Z7WRU6BW28IM6 in ODS ZABAND must have QM status green before it ......"
Now I sit with inactive requests before and after this request that is red.
What do I do to rectify this please?
Cj

Similar Messages

Request without Monitor Log: APO Request or Terminated Request Generation

Hi,
While loading data to ODS from the sources system there is new error request appearing in the ODS with following description:
Request without Monitor Log: APO Request or Terminated Request Generation
Unable to see the error details as this request is not appearing in the monitor, unable to delete the request from the ODS and the error message is below.
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Any thoughts on above issue are helpful.
Thanks
Kumar

My thoughts on this...
This problem might be caused by a program error.
DataStore objects allow you to check or generate master data ID (SID) values during the activation. If you choose to do this, the parallel processes may terminate.
<b>The following prerequisites must apply:-</b>
You activate the DataStore object data in parallel (see transaction RSODSO_SETTINGS).
During the activation, SID values are checked or generated (option "Generation of SID Values" is set).
The generated programs of the InfoObjects of the DataStore objects are not current at the start of the activation (in particular, after metadata changes).
Note 978772 - P10: Parallel SID generation terminates with deadlock
Hope it Helps
Chetan
@CP..

Managing Request without Monitor Log: APO Request or Terminated Request Gen

Hello Everyone,
Need some help of managing a system created DTP named Request without Monitor Log: APO Request or Terminated Request Generation. This is like a staging DTP provided by SAP to support data loads to DSO or Cube and, it's good if the process goes smoothly.
However when we encountered unnecessary error such as tables space or memory problem, this particular job will get stuck and there's no way to move forward or backwards from this point. There were some answers to delete the request from RSICCONT, but I don't see the direct relations here, or maybe I'm wrong.
My only question - Have anyone any idea on how to work around this.
The last thing I've in hand is to delete the whole thing (requests) and re-do from start (extraction). Not a pleasant thing as this DSO feeds to 2 Cube & 1 DSO and then to another Cube.
Thanking everyone in advance.
Regards,
Azmadi

Hi,
sad to knw you had to delete the whole data and reload. I faced the same issue today and here is what i did,
when you go to the reconstruction tab, you will find 2 ticks present
1st one that tells if request is available in data target and
2nd which gives the transfer structure status.
Now, if the first check is crossed it could mean 2 things....data no longer exists in data target or data was not updated to data target these are 2 different things.
So, in your case it wud have sed data was not updated to the target.
Solution, just reconstruct that request and then in the request tab mark it red and delete again since you dont need it.... then the activation through process chain will not fail.

Requests without Monitor Log: APO Request or Terminated Request Generation

Hello all,
Can you please help me in the following issue:
I had in an ODS, a full request of type:
Requests without Monitor Log: APO Request or Terminated Request Generation.
I deleted the request from table: RSICCONT in debugging mode. The request was on green.
Now I have problems on activating the next requests in automatically. Manually it is working.
Request REQU_6DFXRA2VWJL3KYU44JPCWKXL2 no longer exists in DSO SVO_PPAB; system is inconsistent
Activation of M records from DataStore object SVO_PPAB terminated
Please help
Thank you
Ramona

Hi,
Refer the below links,
Re: Managing Request without Monitor Log: APO Request or Terminated Request Gen
http://ar.delhigovt.nic.in/ar1/Mission%20Conv%20RFP%20-%20Vol%20I-%20V4.0.pdf
http://help.sap.com/bp_bblibrary/600/documentation/R61_BPP_EN_DE.doc
Hope it helps you,
Regards,
Ravindra.

Request without Monitor Log:

HI Frds,
When i am deleteing a req. from ODS, i am not able delete the Req. I Req. status is in Red and tech. status also in Red. Its showing DTP/Infopackage as "Request without Monitor Log: APO Request or Terminated Request Generation" and not able to see the Moniter(RSMO).
Kindly can one give me some solution to delete these type req. ?
Thanks
Pari

Hi,
Apply the recommendation of the above note:
1138410-->execute the report RSSM_ZOMBIE_REQUEST_DELETE before checking if you do not have entries in the table RSSELDONE or the table RSMONMESS but which may be displayed in the administration of a
data target with the descriptive text "Request without monitor log: APO request or terminated request creation".
I hope it helps.
Best regards,
Fran.

Strange error or not? (ORA-01653 and APO Interface)

Hi Gurus,
I'm facing some strange problems in our BW-System. Last weekend we got some error messages: "ORA-01653: unable to extend table " This happend during loading. No problem, basis team worked fine and data loading ist going well again.
Now comes the strange stuff: Every Cube that had problems last weekend has a request with status "red" called "Request loaded using the APO interface without monitor log". The Request date is in some cases 14 days in the past.
What is this about? Basis team doesn't knows, so my coleagues. I learned SEM/BPS data is loaded this way, but our expert says he never dealt with the affected cubes.
Best regards,
Leo

That's what the basis team did and that work fine. The problems were the red APO-requests. We had another problem last weekens. A source system was shut down and our communications user was deleted because. This system should be taken out of our BW, but the processes were still running. I guess that's the reason. I cut all connections to this system and now everythin is fine.

Communication channel monitoring logs

Dear all,
on weekend we had a problem with a CC. Messages not have beend pick up from
a FTP server. The problem was solved automatically and I was not able to see
any error entries in the CC monitoring log files because there were to many
entries without error.
My question:
Is there an option for persisting the logs into a trace file on server? I was not
able to find the entries in defaultTrace or anywhere else.
How to raise the time/size of the log files?
Thanks
Chris

Hi,
I think the channel was getting locked and so, it could not pick up any data.
Refer the SAP note 849089 for this.
-Supriya.

Firewire Interface and Monitor Mix

We'll, I've read all I can, and settled on a M-Audio Fast Track Pro for my interface. I went with the USB, but the residual latency and weak pre-amps have me looking to return it and get something different. I will mainly be using it to record guitar, bass, drums, and vocals over some loops. Here are my needs:
-One XLR and one 1/4" input. (Two 1/4" inputs would be nice, for taking stereo feed from a mixer when recording drums).
-1/4 L/R outputs to feed powered monitors
-Headphone out (of course)
-Nice, powerful preamp. The Fast Track Pro has to be cranked to record vocals from a Beta 57a.
...and here's the big one.
-An ability to adjust the monitor mix between input and playback. I'm not sure how people get a good monitor mix when using an interface without this capability. I like this feature on the Fast Track Pro, but it comes with some latency. I imagine some of this can be attributed to it's USB design.
Any suggestions would be great. I know this has been beaten to death. Thank you.
Mike
MacBook Pro 2.33 Mac OS X (10.4.9)

Latency is rarely caused by use of usb. It is almost always computer side, hard drive being probably the big cause. Especially with laptop hard drives.
Also just because your 57 needs to be at 10 on the FT Pro and say 8 on another device doesn't mean the sound will be any different. But I have heard that the Fastracks don't have as much gain as other interfaces.
If your mixing playback plus dry input you shouldn't have any latency but if you are mixing playback and wet input then you could get latency.

[SOLVED] x11vnc without monitor connected

How to start correctly x11vnc (or eventually vncserver) without monitor connected?
In the wiki is written
"Note: By default, Xorg needs to be able to detect a monitor and will not start otherwise. A workaround is to create a configuration file such as the example above and thus avoid auto-configuring. A common case where this is necessary is headless system, which boots without a monitor and starts Xorg automatically, either from virtual console and login, or using a display manager."
However this is not working in mycase. I cannot connect to previuosly configured x11vnc if monitor is detached. X is not starting. I am sure that the driver is right.
This is a system with LXQt desktop and sddm.
Last edited by hifi25nl (2015-05-14 11:03:32)

The dummy config file found in the wiki worked fine for me for the xserver itself (just make sure to pick the resolution(s) you want), but not all display managers worked correctly (GDM in particular is a problem, but I've had trouble with others). I've been able to use x11vnc on headless systems ranging from 5th generation i7's to raspberry Pis, so it's definitely possible.
It would help if you could provide your xorg.conf.d configuration, and your X or VNC logs so we could see what the issue is.
Try disabling your display manager and rebooting without a monitor attached, starting x manually via ssh, and then exporting the DISPLAY before starting x11vnc. For example try running the following lines interactively from the console via ssh.
startx &
export DISPLAY=:0
xrandr --fb 1920x1080
x11vnc --fbauth /path/to/password -display :0 -geometry 1920x1080 auth guess -forever -bg
Make sure to pick a mode (resolution) that's supported in your configuration files, etc. Those commands should give you copious error messages if they fail, which will give us a place to start.
As an aside, if all you want is a vncserver, tigervnc will work with much less fuss because it creates a virtual display so you don't need to mess with your xorg settings at all. x11vnc (without addins) relies on your system's literal physical display output device, which is what necessitates all the xorg fiddling. The only reason to use x11vnc is if you need to remote control an actual screen (which doesn't sound like your use case) or if you need the desktop you're VNCing into to have hardware acceleration for some reason. Tigervnc will "just work" in most setups without significant additional configuration.
Last edited by mwillems (2015-05-13 19:48:47)

Monitoring Log in SharePoint Foundation 2010

Hello,
I´m using SharePoint Foundation 2010 and I want to configure Monitoring log, because we have had any problems because the user changed the permissions in other sites or deleted Users.
So I want to know who makes this action in Monitoring Log SharePoint 2010.
Regards.

Take a look at this 3rd party solution:
https://auditlogsp.codeplex.com/
The Site Collection Administrator can modify audit settings, but audit settings aren't available OOTB in Foundation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT1353 Is it possible to have another iCloud login on my unit without me logging into that account?

Is it possible to have another iCloud login on my unit without me logging into that account?
I lost my iTouch4 last June10 after a party. I stayed in a hotel with my team that night when i lost it --- lost in the hotel not in the party. I just got my new iPhone 4S this June25. When i used Find my Phone app i saw that there are 2 devices: ipod (named after one of my teammates) and iPhone (under my name). whne i check the features of my iPhone, the contacts, calendar, bookmarks and apps i downloaded previously on iTunes are sync to what i entered on my iTouch. My teammate told me that he also noticed that on "his iPod" and he dont know why his apple ID was changed to mine.
Is it possible to get that situation? Or is that an evidence that he has my iPod touch 4? I need help to clear things out. Thanks.

- I do not understand what yo are seeing with the FIndMyiPod app. That app can set up to find any iOS device. you just have to enter the Apple ID and passwords used for that device.
- on your computer go to iCloud, sign into your account and go to FindMyiPhone. What do you find?

Configure Interface channel monitoring for PI in SOLMAN 7.1

Hi Experts,
I am configuring interface channel monitoring for PI in SOLMAN 7.1.In step 5 (Define scope) it is asking to select scenario.I can see all PI systems (Dev,QA and PRD) is listed in the table with "monitoring and alerting setup status" as yellow.when I select PI (prod) and proceed , in step 6.3 (Interface channel Monitoring config) I don't find any channel name in table.I need your support to clear my understanding on this.
1)My objective is to monitor all the interfaces that are existing between PI system and other SAP as well as non SAP systems (that include JDBC connections also).How can find all these interfaces in solman while doing Interface channel monitoring config?
2)I am not sure if I have understood correctly that I need to create scenario that includes technical systems between which Interface channel are to be monitored. If I am correct then how can I bring the technical system to SOLMAN SLD from Local SLD of PI(prod).Here I am not getting option to synchronize SOLMAN SLD from PI Local SLD. Even Import option is also not there. Do I need to create all the Technical systems (present in PI) to SOLMAN SLD manually?
If my understanding is not correct then please guide me through steps to do the configuration to achieve my objective.
Thanks
Aditya Roushan.

yes, the problem solved. thanks for your replies all.
the users SLDDSUSER and SLDAPIUSER got locked, I changed it in su01.
and I created rfc in SM59 for SAPSLDAPI and LCRSAPRFC and create the same in JCo RFC provider.
both are working.
but iam facing new problem.
I have solution manager 7.1 system and I configured local SLD. I did not connect any managed system as of now.
after all the trouble shooting, SLDAPICUST and SLDCHECK is fine but
the error is
"Functional call returned exception code 3"
"Access to XI Profile currently disrupted.
I have solution manager 7.1, I did not configure managed systems as of now. is this error belongs to solution manager 7.1 or for PI system.
can u please guide me how to trouble shoot this error. check the following screen shot for reference.
thanks in advance.

Customize interface without touching the source code

My VP of of marketing is at it again. I have pasted in the exact email that he sent me. If anyone has ideas or suggestions or knows if Forms 9i has this built-in capability, please let me know.
Thanks.
Can you post this on metalink and see if someone at Oracle (or elsewhere) has an answer for us? Somehow, other LIMS developers are distributing LIMS products that allow their users to customize the interface without touching the source code -- no impact on their ability to take new releases. How do they do that?
Here's my question:
Anyone familiar with the Tools / Forms / Design this Form feature in MS Outlook? This allows a mere mortal to actually create and publish a custom Outlook form (could be a Contact, Task, Note, Journal, etc. form) across the organization. Is there such a capability built into Oracle9i Forms? In other words, can a developer easily build and distribute an Oracle software app such that the end-user can use an administrative tool to modify the interface/forms, add fields, change field names, move things around on the form, change colors, etc. -- without needing the Oracle Developer tool used by the original software developer, along with source code?
Here's my original email from a few months ago:
Our VP of marketing has been on my case about the ability to allow customers to "map" a form label (prompt) to a "custom" label of their choosing. The only way I know to do this is to create a "mapping" table and each time a form opens have code in the Post-Query trigger that changes the prompt of each column to the label that is in the "mapper" table. My fear here is Performance. Also, if the user closes that form and comes back to it - that logic has to be executed again - once again Performance. We have thought about the global variable idea, but we have over 100 tables with approx. 20 columns each. That's alot of globals to carry around. What's the overhead of carring around let's say 150 global variables?
My questions to all of you are:
1) Is anyone else doing this exact thing?
2) If so, what is the performance hit?
3) Is there a way to "remember" after the first time it paints - until the application is closed (not just that form) - other than global variables?
4) Is there a solution already in place within Forms for this?
5) Is there newer technology that has overcome this problem?
My VP doesn't like the mapping idea. He wants to know isn't there a better way instead of mapping all the fields. Isn't there some simple utility provided by Oracle that allows the user to simply change the form labels (no, he's not talking about Oracle Developer). He is a real Outlook nut. So he's always comparing everything to how Outlook works. This is how it works in Outlook -- you click on Design Form, modify it, then install it on the machine. Surely Oracle must have something like this. He thinks we're asking the wrong question or not asking it in the right way. I'm not sure how else to ask it. Our users want to see "Date of Birth" spelled out instead of "DOB" as the label for a column on a form. Is there a way for them to take the fmx and change that label? Is there a better way other than storing this in a table and querying it up each time the form opens? Yes, I could use a global so I don't have to query it from the database every time, but I still have to evaluate every time the form is opened during that session to see which label I need to use and then set the prompt accordingly. Our VP doesn't like this, he wants this to be a one time change.
Thanks so much for you help,
Tina

Hmmm.... either your VP of marketing or the users have too much time on their hands. ;-)
I would go with a lookup table. If your database is responsive and you index the table by form name, you can retrieve a number of rows and setup the screen quickly enough that nobody would notice any time lag.
If there aren't too many titles stored in the form, you could use a PLL library procedure and stuff all of them into a few globals -- just stack them into a single string separated by an odd character, like maybe chr(3). Then when the form is called again, it could first check to see if the globals exist, and parse the titles from there.
But be careful about changing field titles. If they change DOB to Date of Birth, the length changes, and so you need to determine where the extra length goes. The title field must be wide enough and the text justification should be set properly.

File to File Interface without ESR objects

Hello everyone,
I have a requirement where our business users will produce the .csv files in one location and we need to move to another location.
I recon that we can build this File to File interface( usin FCC) without using ESR objects, can any one help me with the procedure since i am new to PI.
Thanks in advance

HI Chandrika ,
File to File Interface without ESR objects
this is very simple , you need to create Configuration objs
1. sender Communication channel and agrrenment
2. receiver Communication channel and agrrenment
3. u have to provide dummy service interface names and name space in interface determination,
4.in receiver determination , we have to provide source and receiuvers bu.components and remaining dummy names.
thanks,

Need help in generating L4 Traffic monitor logs

Hi,
As a part of my project I need to study different types of logs produced by Cisco IronPort. I could generate some access and authentication logs however not sure about generating the L4 Traffic Monitor logs. Can anyone point me to right documentation that will help me generate those logs?
Thanks,
Harshad Kashikar

Harshad,
L4 Traffic Monitoring needs to be configured within the IronPort - first question is do you have a SPAN/TAP port set up on your switch to capture L4 traffic?
Second, I only use this feature to capture information on malware/spyware - I have seen P2P, IRC, and 'phone-home' traffic amongst other things. Do you have an infected host you can monitor?
BF

DBIF_DSQL2_DEFAULT_CR_ERROR": APO Interface without monitor log

Similar Messages

Maybe you are looking for