'DBIF_RSQL_INVALID_RSQL' short dump

Hello All,
I have a dynamic where_clause in a select query. ie its created at runtime. I get a short dump 'DBIF_RSQL_INVALID_RSQL' at the select statement. The reason shown in ST22 is:
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
Could you please suggest a solution to the problem, since the data to be fetched is large I would not want to use select-endselect loop as that would make it slower.
Thanks in advance,
Anju

Hi Anju,
Check the link
[ Perfect link|
DBIF_RSQL_INVALID_RSQL;
Regards,
Sandeep

Similar Messages

  • Short dump (DBIF_RSQL_INVALID_RSQL) during activating ODS

    Hello Experts,
    I found short dump during activating ODS.
    The error message in short dump:
    Runtime Error: DBIF_RSQL_INVALID_RSQL
    Except.: CX_SY_OPEN_SQL_DB
    The termination occurred in the ABAP program "GP7WIVS2MDWGSTMN3ICFDKNAH65" in "ACTIVATE_SIDS".
    The main program was "RSODSACT1 ".
    I add one InfoObject in the ODS. After activating related objects, I loaded data into the data target.
    Data seemed to be loaded correctly, but couldn't be activated.
    Any suggestion on this?
    -WJ-

    Hi,
    Please chekc the following SAP Notes you will find solution
    Note 908599 - Runtime error SAPSQL_INVALID_FIELDNAME during activation
    Note 612995 - P13:ODS:Data activation in bckgrnd always ends 'successfully
    Note 1175860 - P19: DSO: SDL: Automatic update after activation
    Note 1113603 - P17:DSO:Postprocessing ODS - activating and updating
    Note 378447 - Correction: hierarchies do not become green
    Note 1272738 - P21:DSO: Activation and automatic updating
    Note 794584 - P26:Timestamp field empty in RS2NDPROCPROT after ODSACTIVATE
    Note 800086 - P26: ODS activation: Status field in table RS2NDPROCPROT
    Note 856292 - P28: Automatic functions: No lock obtained for ERSICENQ
    Thanks
    Reddy

  • Short dump in SAP R/3: SQL statement buffer overflow?

    Hello,
    I hope someone can help us with the following problem:
    A short dump in SAP R/3 (DBIF_RSQL_INVALID_RSQL, CX_SY_OPEN_SQL_DB)
    occurred during a delta load, which worked fine for several month.
    The custom code crashes at a FETCH NEXT CURSOR statement.
    I assume, it might be a SQL statement buffer overflow in SAP R/3?
    The problem can be reproduced by RSA3, and is therefore not time-dependent.
    The problem did not occur before or on the quality assurance system.
    Cursor code:
          Read all entries since last transfer (delta mechanism)
            OPEN CURSOR WITH HOLD s_cursor FOR
              SELECT * FROM ekko
                WHERE ebeln IN t_selopt_ekko.
    t_selopt_ekko has up to 60.000 data sets, which worked fine in the past.
    It is very likely that the amount of data during the first crash did not exceed this.
    SQL-Trace of RSA3 call:
    It seems that 25150 data set can be processed via fetch before the short dump occurs
    After that object SNAP is written:
    "...DBIF_RSQL_INVALID_RSQL...dynpen00 + 0xab0 at dymain.c:1645 dw.sapP82_D82
    Thdyn...Report für den Extraktoraufruf...I_T_FIELDS...Table IT_43[16x60]TH058FUNCTION=
    RSA3_GET_DATA_SIMPLEDATA=S_S_IF_SIMPLE-T_FIELDSTH100...shmRefCount  = 1...
    ...> 1st level extension part <...isUsed       = 1...isCtfyAble   = 1...> Shareable Table Header Data
    <...tabi         = Not allo......S_CURSORL...SAPLRSA3...LRSA3U06...SAPLRSA3...
    During dump creation the following occurs:
    "...SAPLSPIAGENTCW...CX_DYNAMIC_CHECK=...CRSFH...BALMSGHNDL...
    DBIF_RSQL_INVALID_RSQL...DBIF_RSQL_INVALID_RSQL...DB_ERR_RSQL_00013...
    INCL_ABAP_ERROR...DBIF_INCL_INTERNAL_ERROR...INCL_INTERNAL_ERROR...
    GENERAL_EXC_WITHOUT_RAISING...INCL_SEND_TO_ABAP...INCL_SEARCH_HINTS...
    INCL_SEND_TO_SAP...GENERAL_EXC_WITHOUT_RAISING...GENERAL_ENVIRONMENT...
    GENERAL_TRANSACTION...GENERAL_INFO...GENERAL_INFO_INTERNAL...
    DBIF_INCL_INTERNAL_CALL_CODE..."
    Basis says, that the Oracle data base works fine. The problem seems to be a SAP R/3 buffer.
    Does anyone had a similar problem or knows where such a buffer might be or how it can be enlarged?
    Best regards
    Thomas
    P.S.
    Found a thread that contains part of the dump message "dynpen00 + 0xab0 at dymain.c:1645":
    Thread: dump giving by std prg contains -> seems not to be helpful
    Found a similar thread:
    Thread: Short dump in RSA3 --Z Data Source -> table space or somting else?
    Edited by: Thomas Köpp on Apr 1, 2009 11:39 AM

    Hi Thomas,
          Its due to different field length.
    Just check it out in code after FETCH NEXT CURSOR what internal table you have mention.
    that internal table shoul deffined by taking refrence of ekko, because your code is
    OPEN CURSOR WITH HOLD s_cursor FOR
    SELECT * FROM ekko
    WHERE ebeln IN t_selopt_ekko.
    hope you got solution.
    Regards,

  • Short dump in RSA3 --Z Data Source

    Hi,
    I created a Z data source based on view and i appended extract structure to insert ZZ fields.
    When i execute the data source it is showing me short dump how shall i proceed
    I checked the view conditions and it is extracting data and showing now error and i checked the enhancements i have written in CMOD and checked the program it is displaying No syntax errors
    Please advise me on how to correct the errors....
    If need further info of short dump please ask
    Runtime Error          DBIF_RSQL_INVALID_RSQL
    Exception              CX_SY_OPEN_SQL_DB                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLRSA3" had to be terminated because one of the
    Statements could not be executed. 
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail belo.The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', waS neither                                                           caught nor passed along using a RAISING clause, in the procedure "RSA3_GEN_GET_DATA" "(FUNCTION)"                                                                               
    Since the caller of the procedure could not have expected this exceptio to occur, the running program was terminated.           
    The reason for the exception is:                                      
    The data read during a SELECT access could not be inserted into the target field.                                                         
    Either conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
    Information on where terminated                                                                               
    The termination occurred in the ABAP program "SAPLRSA3" in "RSA3_GEN_GET_DATA".   
    The main program was "RSFHGEN2 ".                                                                               
    The termination occurred in line 226 of the source code of the (Include)          
    program "LRSA3U03"                                                               
    of the source code of program "LRSA3U03" (when calling the editor 2260).          
    Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in   
    the                                                                               
    procedure "RSA3_GEN_GET_DATA" "(FUNCTION)" but was not handled locally, not       
    declared in the                                                                  
    RAISING clause of the procedure.                                                  
    The procedure is in the program "SAPLRSA3 ". Its source code starts in line 5     
    of the (Include) program "LRSA3$03 ".                                             
    Program
    002150                                                                            
    002160       CASE G_S_INTERFACE-UPDMODE.                                          
    002170         WHEN 'F' OR 'C' OR 'I'.                                            
    002180   * First data package -> OPEN CURSOR                                      
    002190           IF G_COUNTER_DATAPAKID = 0.                                      
    002200   * Open Cursor for dynamical SELECT                                       
    002210             OPEN CURSOR WITH HOLD G_CURSOR FOR                             
    002220             SELECT * FROM (G_S_OLTPSOURCE-EXTRACTOR)                       
    002230                    WHERE (L_T_DYNAMIC_SELECT).                             
    002240           ENDIF.                                                           
    002250   * Fetch first data package                                               
    >           FETCH NEXT CURSOR G_CURSOR                                       
    002270                        APPENDING CORRESPONDING FIELDS OF TABLE E_T_DATA    
    002280                        PACKAGE SIZE G_S_INTERFACE-MAXSIZE.                 
    002290           IF SY-SUBRC <> 0.                                                
    002300             RAISE NO_MORE_DATA.                                            
    002310           ENDIF.                                                           
    002320           G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.                   
    002330         WHEN 'D'.                                                          
    002340           PERFORM FETCH_GEN_DELTA IN PROGRAM (L_GEN_PROGID)                
    002350                           TABLES E_T_DATA                                  
    002360                                  L_T_DYNAMIC_SELECT                        
    002370                                  G_T_FIELDS                                
    002380                           USING  G_S_INTERFACE-MAXSIZE                     
    002390                           CHANGING L_FLG_NO_MORE_DATA.                     
    002400           IF L_FLG_NO_MORE_DATA = 'X'.                                     
    002410             IF NOT L_T_BDCPS[] IS INITIAL.                                 
    002420               L_T_BDCPS-PROCESS = SBIWA_C_FLAG_ON.                         
    002430               MODIFY L_T_BDCPS                                             
    002440                    TRANSPORTING PROCESS WHERE PROCESS = SBIWA_C_FLAG_OFF.

    Hello,
    This thread is answered. Was it the table space or something else?
    We may have a similar issue as recently posted in thread:
    "Short dump in SAP R/3: SQL statement buffer overflow?"
    Best regards
    Thomas

  • Query regarding short dump

    Hi
    The runtime error is DBIF_RSQL_INVALID_RSQL and the exception is CX_SY_OPEN_SQL_DB.can anyone explain me these errors.
    At this select query it going to short dump.Could anyone help me.Its urgent.
    Select aaufnr agstrp agsuzp biedd b~iedz into table i_uncount
    from afko as a   inner join   afru as b on aaufnr = baufnr
    for all entries in i_ordscp
    where aaufnr = i_ordscp-aufnr  and bgrund = 'ONS'
    and  b~stzhl = '0000000'.
    Error Analysis:
    The data read during a SELECT access could not be inserted into the target field.
    Either the conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
    The target field is all correct.I've checked it.
    Could anyone please help me.Its really urgent.U'll definitely be given points.
    Thanks
    chandrika.

    Hi Sarath ,
      Please look at the internal table decleration and the sequence of fields in select statement .
    What is happening is that the select is tying to place the value of  iedd  into aufpl as a result of which this incompatibilty occurs.
    So you can either user into corresponding-fields or modify the sequence of your internal table.
    I would sugges the second option , as first can effect the performance.
    So just declare the it as
    TYPES:BEGIN OF t_uncont,
    aufnr like afko-aufnr,
    gstrp like afko-gstrp,
    gsuzp like afko-gsuzp,
    iedd like afru-iedd,
    iedz like afru-iedz,
    aufpl like afko-aufpl,
    END OF t_uncont.
    Regards
    Arun

  • Short dumps

    hI
    Can any one explain me the key feautres in analyzing short dumps if we get for any ABAP program.
    Thanks.
    Venkat.

    ABAP Dump Analysis (ST22)
    All the data saved in SNAP table. & text messages saved in SNAPT.
    ABAP Dumps is the default workspace for the Logs and ABAP Dumps navigator group. The ABAP Dumps workspace provides status information for each mySAP ABAP dump generated for the mySAP managed system that you are monitoring. ABAP Dumps is a predefined workspace that contains the following specific information for each dump:
    u2022     Program associated with the dump
    u2022     Host computer where the dump originated
    u2022     User who created the dump
    u2022     Date and time the dump was created
    u2022     Names of the instances associated with ABAP dumps
    u2022     Summary count of dumps by program
    u2022     Summary count of dumps by user
    You can use the data for specific dumps for the following purposes:
    u2022     Identify the number of ABAP dumps generated for a specific mySAP instance
    u2022     Identify runtime problems that are occurring on your system
    The workspace table view has predefined launch definitions. You can use the launch definitions to run the following transactions on the mySAP system:
    Some common dumps : -
    1) COMPUTE_INT_TIMES_OVERFLOW
    Whole number overflows on multiplication & addition operation.
    Always Declare Result field Larger.
    per =    ( act / budget ) * 100.
    bal =    it_out1-balance + bal .
    pr =     it_out1-t_wtext_pr + pr
    2) COMPUTE_BCD_OVERFLOW
    A value does not fit in a calculation field.
    You may need to define the result field to be larger.
    1.     Showu2019s error on internal table. (multiplication & addition)
    3) Time out
    Reason for error:-
    After a certain time, the program terminates to free the work process
    for other users who are waiting.
    2.     The current setting is 1800 seconds.
    3.     Primary Index not Used & Sequencing not proper.
    4.     Avoid Nested Loops.
    5.     Avoid to use select single in loops
    6.     Avoid using INTO CORRESPONDING TO
    7.     Avoid using SELECT in loops.
    8.     SORT the internal table always and use BINARY SEARCH.
    9.     for all entries that time check  SY-TFILL.
    4)     DBIF_RSQL_INVALID_RSQL       
    The data read during a SELECT access could not be inserted into the
    target field.
    Check the Sequence of the select Query field & internal table fields.
    5)     DBIF_DSQL2_OBJ_UNKNOWN
    Because of Database is not properly connected to Level 2 server.
    1)     when ur using set  Connection command to connect Level 2 server
    That time check the value of Sy-subrc = 0 .
    6)     SAPSQL_ARRAY_INSERT_DUPREC
    Its show the Error when you are going to insert duplicates record in database using
    Insert command.
    There are three ways to solve this problem.
    1     Delete adjacent duplicate.
    ii.     Insert ACCEPTING DUPLICATE KEYS
    iii.     modify command
    7.     CONVT_NO_NUMBER
    Solution:-The program attempted to interpret the value "RTGS " as a number, but
    since the value contravenes the rules for correct number formats,
    this was not possible.
    1.     put Input Validation using If Query
    2.     when programmer try to pass the Char value to  num  field
    3.     or trying to perform Pack or unpack operation on Char. Fields.
    8.      CALL_TRANSACTION_NOT_FOUND
    Transaction " " is not listed in the table of transaction codes
    The current ABAP/4 program uses CALL TRANSACTION to call the Transaction
    & Leave to Transaction
    Table TSTC (Transactions) contains no entry for the Transaction " ". This could be due to a program error (incorrect transaction code specified).
    Ensure that upper/lower case is correct.
    1.     Use capital Values because itu2019s case sensitive.
    9)     Table_invalid_index.
    When you are going to perform Read Insert, update, Delete operation Using index Value & index value = 0. That time it shows this error.
    Check the index value is less then or equal to zero.
    10)     DATASET_CANT_OPEN
    OPEN DATASET / TRANSFER / CLOSE DATASET
    Check Sy-subrc = 0.
    11     LIST_TOO_MANY_LPROS
    At present, the maximum permitted number of nested screen levels is
    restricted to 50.
    Set by BASIS.
    Use leave to transaction u2018Tcodeu2019 to close all Screens at the end of the program.
    12     . DBIF_DSQL2_SQL_ERROR
    Because of Database is not properly connected to Level 2 server.
    1 when ur using set  Connection command to connect Level 2 server
    That time check the value of Sy-subrc = 0 .

  • Short dump 'Table does not exist in database'

    Hello All,
    When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
    Program :  %_T050N0 (This is a dynamic  program generating by SAP )
    Form Name :  DYN_LIC_SEL_TOT
    exec sql performing LOOP_MOVE_WRITE_ISAP.
    select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
    :dcat-werks, :dcat-charg, :dcat-holdflag,
    :dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                    model_lot = :p_charg
    endexec.
    As per the customer this issue occurring since they migrated the SAP  back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the  Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
    Following is the short dump details:
    Short text
        Table does not exist in database.
    What happened?
        The table or view name used does not
        exist in the database.
        The error occurred in the current database connection "DEFAULT".
    What can you do?
        Check the spelling of the table names in your report.
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
         caught in
       procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
    Database error code: "-204"
    Could you please  let me know what might be the reason for this issue.
    Many Thanks in Advance.

    Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
    If the table displays, go to menu item Utilities -> Database Object -> Database Utility
    In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
    You may need basis team's help to carryout some of these actions.

  • Short Dump while scrolling in a maintenance view

    A maintenance view has one field, defined as "Radiobutton".
    1) Select the radiobutton for one entry.
    2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
    3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
    4) On scrolling up again the short dump occurs.
    The short dump text says "More than one radio button is active".
    Any inputs in this regards are appreciated.
    Thanks.
    Gajendra.

    Hi,
    that means you are trying to make two radio buttons active.
    parameters: ra radiobutton group g1 default = 'X',
                rb radiobutton group g1.
    ra = 'X'.
    and rb = 'X'.
    in your case so obviously it will dump.
    check your coding..
    and show your code...
    Regards
    vijay

  • SHORT DUMP WHILE EXECUTING DTP.

    Hi Gurus,
    I have got a short dump while executing DTP the Error is as Follows.
    Runtime Error: MESSAGE_TYPE_X.
    Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
    2.There is a error in the application program
    And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
    But i have no much time and i have to someway or the other execute the DTP and load the data.
    Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
    Regards
    Amar.

    Hi Amar,
    If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
    Thanks..
    Shambhu

  • Custom error message in user exit is giving Short dump

    Hi All,
    We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
    saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
    in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
    CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
             lc_zin           TYPE vbak-auart VALUE u2018ZINu2019,
                         lc_zir            TYPE vbak-auart VALUE u2018ZIRu2019,
                         lc_text(32)    TYPE c VALUE u2018Check long text for more detailsu2019.
    DATA: l_uname TYPE sy-uname.
    CLEAR: l_uname.
    MOVE sy-uname TO l_uname.
    *If user ID is not the Web application ID then block the creation/Change/Deletion
    IF   l_uname NE lc_vbcpic01
    AND ( vbak-auart EQ lc_zin
    OR    vbak-auart EQ lc_zir ).
    MESSAGE e830(zv) WITH lc_text.
    ENDIF.
    This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
    But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
    Error Analysis:
    During "Exit Command" processing, the program tried to send a " " message.
    This is not allowed at this point in processing.
    The program had to be terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
    If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
    I am working on 4.6C version of SAP.
    Note: When i issue information/Warning message contract is getting deleted after displaying the message.
    Thanks,
    Vinod.

    I exactly replicated the same in DELETE_DOCUMENT also
    I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
    Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
    it is also giving the dump.
    copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
    MODULE cancel INPUT.
      MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
      IF ok_code = 'CANCEL'.
        CLEAR ok_code.
        LEAVE PROGRAM.
      ENDIF.
    ENDMODULE.
    and see...

  • Short dump while creating a plant.

    Dear experts,
    Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
    Runtime Errors         RAISE_EXCEPTION
    Date and Time          27.10.2007 17:10:59
    Short text
    Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
    exception
    condition "DATA_INCONS_IN_EXIT_MANAGEM".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
    "GET_INSTANCE"
    or
    "CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
    or
    "SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "BSLERP"
    Network address...... "10.60.0.30"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 801586"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "BSLERP"
    Database type..... "ORACLE"
    Database name..... "BTS"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Apr 2 2006 23:08:16"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10103_SHARE "
    Patch level. 52
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 17768808
    Heap.... 0
    Page.... 65536
    MM Used. 12293456
    MM Free. 1291704
    User and Transaction
    Client.............. 800
    User................ "MURTHYTSN"
    Language key........ "E"
    Transaction......... "SPRO "
    Program............. "CL_EXITHANDLER================CP"
    Screen.............. "SAPLSZA1 0201"
    Screen line......... 70
    Information on where terminated
    Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
    in "GET_INSTANCE".
    The main program was "SAPLS_IMG_TOOL_5 ".
    In the source code you have the termination point in line 36
    of the (Include) program "CL_EXITHANDLER================CM001".
    Source Code Extract
    Line
    SourceCde
    6
    type_ref TYPE REF TO cl_abap_typedescr,
    7
    class_name TYPE seoclsname,
    8
    abs_type_classname TYPE string,
    9
    def_impl TYPE seex_boolean VALUE seex_false,
    10
    mig_enhspotname TYPE enhspotname,
    11
    is_impl TYPE enhboolean,
    12
    mig_badi_name TYPE enhbadiid.
    13
    14
    CALL METHOD cl_exithandler=>get_class_name_by_interface
    15
    EXPORTING
    16
    instance                      = instance
    17
    IMPORTING
    18
    class_name                    = class_name
    19
    CHANGING
    20
    exit_name                     = exit_name
    21
    EXCEPTIONS
    22
    no_reference                  = 1
    23
    no_interface_reference        = 2
    24
    no_exit_interface             = 3
    25
    data_incons_in_exit_managem   = 4
    26
    class_not_implement_interface = 5
    27
    OTHERS                        = 6.
    28
    CASE sy-subrc.
    29
    WHEN 1.
    30
    RAISE no_reference.
    31
    WHEN 2.
    32
    RAISE no_interface_reference.
    33
    WHEN 3.
    34
    RAISE no_exit_interface.
    35
    WHEN 4.
    >>>>>
    RAISE data_incons_in_exit_managem.
    37
    WHEN 5.
    38
    RAISE class_not_implement_interface.
    39
    ENDCASE.
    40
    41
    CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
    42
    43
    Is the given instance initial?
    44
    IF NOT instance IS INITIAL.
    45
    CALL METHOD cl_abap_typedescr=>describe_by_object_ref
    46
    EXPORTING
    47
    p_object_ref = instance
    48
    RECEIVING
    49
    p_descr_ref  = type_ref.
    50
    CHECK type_ref->absolute_name NE abs_type_classname.
    51
    ENDIF.
    52
    53
    SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
    54
    WHERE exit_name = exit_name.
    55
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    4
    SY-INDEX
    1
    SY-TABIX
    0
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    ADDR0200
    SY-UCOMM
    CHCK
    SY-TITLE
    Edit address:  5002
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20071024
    SY-UZEIT
    171059
    SY-XPROG
    SAPCNVE
    SY-XFORM
    CONVERSION_EXIT
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    43 METHOD       CL_EXITHANDLER================CP    CL_EXITHANDLER================CM001    36
    CL_EXITHANDLER=>GET_INSTANCE
    42 FUNCTION     SAPLXSZAR                           ZXSZARU01                              25
    EXIT_SAPLSZAR_001
    41 FUNCTION     SAPLSZAR                            LSZARU01                              108
    ADDR_REGIONAL_DATA_CHECK
    40 FORM         SAPLSZA2                            LSZA2F20                              382
    CHECK_ADDR1_DATA
    39 FUNCTION     SAPLSZA2                            LSZA2U02                               42
    ADDR_CHECK
    38 FUNCTION     SAPLSZA0                            LSZA0U01                               79
    ADDR_INSERT
    37 FORM         SAPLSZA1                            LSZA1F22                             1886
    INSERT_ADDRESS_INTO_MEMORY
    36 FORM         SAPLSZA1                            LSZA1F22                             2234
    PUT_ADDRESS_TO_MEMORY
    35 FORM         SAPLSZA1                            LSZA1I02                              409
    D0100_OK_CODE
    34 FORM         SAPLSZA1                            LSZA1F03                               17
    D0100_OK_CODE_WRAPPER
    33 MODULE (PAI) SAPLSZA1                            LSZA1I02                               13
    D0100_OK_CODE
    32 FUNCTION     SAPLSZA1                            LSZA1U01                              200
    ADDR_DIALOG_INTERN
    31 FUNCTION     SAPLSZA1                            LSZA1U05                              177
    ADDR_DIALOG
    30 FORM         SAPL0ORG                            LSVIMF24                              292
    ADDRESS_MAINTAIN
    29 FORM         SAPL0ORG                            LSVIMFX2                              577
    DETAIL_PAI
    28 MODULE (PAI) SAPL0ORG                            LSVIMIXX                              354
    DETAIL_PAI
    27 FORM         SAPL0ORG                            LSVIMF2L                              337
    CALL_DYNPRO
    26 FUNCTION     SAPL0ORG                            L0ORGU34                               35
    VIEWPROC_V_T001W
    25 FUNCTION     SAPL0ORG                            L0ORGU33                               49
    VIEWFRAME_V_T001W
    24 FUNCTION     SAPLSVIM                            LSVIMU01                              138
    VIEW_MAINTENANCE
    23 FUNCTION     SAPLSVIM                            LSVIMU03                              427
    VIEW_MAINTENANCE_CALL
    22 FORM         SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYF01                    358
    START_SELECTED_TRANSACTION
    21 MODULE (PAI) SAPLDSYH                            LDSYHI12                               56
    D1200_PAI_MODULE
    20 FUNCTION     SAPLDSYH                            LDSYHU11                               70
    OUTLINE_LIST_TCODES
    19 FUNCTION     SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYU07                    103
    S_CUS_ACTIVITY_EXECUTE
    18 FUNCTION     SAPLS_CUS_IMG_ACTIVITY              LS_CUS_IMG_ACTIVITYU04                 35
    S_CUS_IMG_ACTIVITY_EXECUTE
    17 FUNCTION     SAPLS_IMG_TOOL_1                    LS_IMG_TOOL_1U02                       63
    STREE_EXIT_TO_OBJECT_COBJ
    16 FUNCTION     SAPLSHI1                            LSHI1U16                              120
    STREE_EXIT_TO_OBJECT
    15 FORM         SAPLSHI01                           LSHI01F0Y                             185
    EXIT_TO_OBJECT_HC
    14 FORM         SAPLSHI01                           LSHI01F05                              70
    HANDLE_LINK_CLICK
    13 METHOD       SAPLSHI01                           LSHI01CI1                              25
    LCL_APPLICATION=>HANDLE_LINK_CLICK
    12 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM013    53
    CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
    11 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM00S    60
    CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
    10 METHOD       CL_GUI_COLUMN_TREE============CP    CL_GUI_COLUMN_TREE============CM01O    15
    CL_GUI_COLUMN_TREE=>HANDLE_EVENT
    9 METHOD       CL_TREE_CONTROL_BASE==========CP    CL_TREE_CONTROL_BASE==========CM017    32
    CL_TREE_CONTROL_BASE=>DISPATCH
    8 METHOD       CL_GUI_CFW====================CP    CL_GUI_CFW====================CM001   138
    CL_GUI_CFW=>DISPATCH
    7 FORM         SAPLSHI01                           LSHI01F1M                              17
    EXECUTE_USER_COMMAND_W_EXITS
    6 FUNCTION     SAPLSHI01                           LSHI01U12                              30
    STREE_BROWSER_PAI
    5 MODULE (PAI) SAPLSHI01                           LSHI01I01                              55
    PAI_200
    4 FUNCTION     SAPLSHI01                           LSHI01U07                             165
    STREE_BROWSER_DYNP_HC
    3 FUNCTION     SAPLSHI21                           LSHI21U03                             144
    STREE_EXTERNAL_DISPLAY
    2 FORM         SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5F01                       20
    DISPLAY_REFERENCE_IMG
    1 MODULE (PAI) SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5I01                       39
    USER_COMMAND_0100
    Chosen variables
    Name
    Val.
    No.      43 Ty.          METHOD
    Name  CL_EXITHANDLER=>GET_INSTANCE
    EXIT_NAME
    22222222222222222222
    00000000000000000000
    00000000000000000000
    00000000000000000000
    NULL_INSTANCE_ACCEPTED
    2
    0
    0
    0
    ACT_IMP_EXISTING
    2
    0
    0
    0
    INSTANCE
    F0000000
    F0000000
    SY-REPID
    CL_EXITHANDLER================CP
    4454545444444533333333333333334522222222
    3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_SPACE
    2
    0
    0
    0
    CL_DRAGDROP=>COPY
    1
    0000
    1000
    CL_WB_REQUEST=>TO_IMMEDIATE_START
    SY-SUBRC
    4
    0000
    4000
    CL_DRAGDROP=>USEDEFAULTEFFECT
    4
    0000
    4000
    SYST-REPID
    CL_EXITHANDLER================CP
    4454545444444533333333333333334522222222
    3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    CL_GUI_CONTROL=>LIFETIME_DEFAULT
    0
    0000
    0000
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ABS_TYPE_CLASSNAME
    No.      42 Ty.          FUNCTION
    Name  EXIT_SAPLSZAR_001
    IV_NATION
    2
    0
    0
    0
    X_ACCEPT_ERROR
    2
    0
    0
    0
    X_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    X_DIALOG_ALLOWED
    X
    5
    8
    0
    0
    Y_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Y_RETCODE
    2
    0
    0
    0
    ERROR_TABLE[]
    Table IT_2299[0x572]
    \FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
    Table reference: 208
    TABH+  0(20) = 00000000F8EB2E3D00000000D0000000FB080000
    TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
    TABH+ 40( 8) = 10000000C1248001
    store        = 0x00000000
    ext1         = 0xF8EB2E3D
    shmId        = 0     (0x00000000)
    id           = 208   (0xD0000000)
    label        = 2299  (0xFB080000)
    fill         = 0     (0x00000000)
    leng         = 572   (0x3C020000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000317
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = Not allocated
    pghook       = Not allocated
    idxPtr       = Not allocated
    shmTabhSet   = Not allocated
    id           = Not allocated
    refCount     = Not allocated
    tstRefCount  = Not allocated
    lineAdmin    = Not allocated
    lineAlloc    = Not allocated
    shmVersId    = Not allocated
    shmRefCount  = Not allocated
    shmIsReadOnly = Not allocated
    >>>>> 1st level extension part <<<<<
    regHook      = 0x00000000
    collHook     = 0x00000000
    ext2         = 0xD09AD03C
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x30F18E3D
    delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    SY-XPROG
    SAPCNVE
    5454454222222222222222222222222222222222
    3103E65000000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SY-XFORM
    CONVERSION_EXIT
    444545544454545222222222222222
    3FE65239FEF5894000000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    %_VIASELSCR
    0
    4
    %_SPACE
    2
    0
    0
    0
    SY-REPID
    SAPLXSZAR
    5454555452222222222222222222222222222222
    310C83A120000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    LR_EXIT
    F0000000
    F0000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    Y_ERROR_TABLE
    Table[initial]
    No.      41 Ty.          FUNCTION
    Name  ADDR_REGIONAL_DATA_CHECK
    IV_NATION
    2
    0
    0
    0
    X_ACCEPT_ERROR
    2
    0
    0
    0
    X_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    X_DIALOG_ALLOWED
    X
    5
    8
    0
    0
    X_T005
    800IN IND064            ININD000   00 15500  4111  0000 00 436      664000INDIEN 000 1
    3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
    8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Y_ADRC_REGIO
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Y_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Y_RETCODE
    2
    0
    0
    0
    ERROR_TABLE[]
    Table IT_2299[0x572]
    SY-XPROG
    SAPCNVE
    5454454222222222222222222222222222222222
    3103E65000000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    LV_MAND
    C
    422
    300
    000
    000
    SY-REPID
    SAPLSZAR
    5454554522222222222222222222222222222222
    310C3A1200000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_SPACE
    2
    0
    0
    0
    %_CX_GRID_ID
    1
    0000
    1000
    SYST-REPID
    SAPLSZAR
    5454554522222222222222222222222222222222
    310C3A1200000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SV_THERE_IS_CUST_EXIT
    X
    5
    8
    0
    0
    T005S
    22222222222222
    00000000000000
    00000000000000
    00000000000000
    T005
    00                  000   00 00 00   00   0000 00             000       000
    2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    CO_ERROR
    E
    4
    5
    0
    0
    No.      40 Ty.          FORM
    Name  CHECK_ADDR1_DATA
    SY-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    FIELDNAME
    222222222222222222222222222222
    000000000000000000000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    C_NULL
    0
    0000
    0000
    RETURNCODE_ERRORS
    2
    0
    0
    0
    C_ERROR_OCCURRED
    E
    4
    5
    0
    0
    H_ADRC_STRUC+0(1800)
    2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ADDR1_DATA+460(1800)
    2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    H_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    C_COMM_TTX
    TTX
    555
    448
    000
    000
    NATION
    2
    0
    0
    0
    G_ACCEPT_ERROR
    2
    0
    0
    0
    G_DIALOG_ALLOWED
    X
    5
    8
    0
    0
    T005
    800IN IND064            ININD000   00 15500  4111  0000 00 436      664000INDIEN 000 1
    3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
    8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    TSAD6T
    222222222222222222222222222222222222222222222222
    000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000
    ERROR_TABLE[]
    Table IT_2299[0x572]
    %_SPACE
    2
    0
    0
    0
    No.      39 Ty.          FUNCTION
    Name  ADDR_CHECK
    ADDRESS_HANDLE
    8005002
    3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ADDRESS_NUMBER
    2222222222
    0000000000
    0000000000
    0000000000
    ADDRESS_OBJECT_TYPE
    1
    3
    1
    0
    0
    NATION
    2
    0
    0
    0
    RETURNCODE
    2
    0
    0
    0
    ERROR_TABLE[]
    Table IT_2299[0x572]
    ADDRESS_DATA_1
    00000000000000000003XYZ SOLUTIONS LIMITED
    3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
    0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ADDRESS_DATA_2
    0000000000000000
    3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ADDRESS_DATA_3
    0000000000000000
    3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    LV_ADRC_STRUC+0(1800)
    2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ADDRESS_DATA_1+460(1800)
    2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    C_DEFAULT_HANDLE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SYST-REPID
    SAPLSZA2
    5454554322222222222222222222222222222222
    310C3A1200000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ERROR_TABLE
    000
    2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    LV_ADRC_STRUC
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    C_DEFAULT_NATION
    2
    0
    0
    0
    C_SHOW_ALL
    2
    0
    0
    0
    C_PERSONAL_ADDRESS
    2
    3
    2
    0
    0
    SY-REPID
    SAPLSZA2
    5454554322222222222222222222222222222222
    310C3A1200000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ADDRESS_DATA_2+32(1800)
    2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    No.      38 Ty.          FUNCTION
    Name  ADDR_INSERT

    Dear Sunil,
    Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
    Regards,
    Chaitanya

  • Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE

    Hi All
    I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
    After we release the CU design to Generate order we get SHORT DUMP.
    Any help will be of great help.
    I am pasting the details from the dump file here.
    Please let me know.
    Appretaite your help.
    Thanks
    Meghana
    Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
    Date and Time          27.08.2007 18:01:10
    Short text
    "The current application triggered a termination with a short dump."
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
    has
    come across a statement that unfortunately cannot be executed.
    The error occurred during an RFC call to another system.
    In the target system, a short dump has been written as well.
    More detailed information on the error cause can be found there.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "MESSAGE_TYPE_X"
    on the called page.
    How to correct the error
    Please refer to the notes described in the
    short dump.
    System environment
    SAP-Release 700
    Application server... "MB1ES1005"
    Network address...... "10.191.97.206"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "2x Intel 801586"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 3
    Shortdump setting.... "full"
    Database server... "MB1ES1005"
    Database type..... "ORACLE"
    Database name..... "EC6"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Jul 25 2007 00:57:05"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 121
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 8176
    EM...... 14633136
    Heap.... 0
    Page.... 131072
    MM Used. 5005432
    MM Free. 1263944
    User and Transaction
    Client.............. 200
    User................ 10086330
    Language key........ "E"
    Transaction......... "/***/DESIGN "
    Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
    Program............. "/***/SAPLCUORDER_N"
    Screen.............. "/***/SAPLCUORDER_N 2000"
    Screen line......... 34
    Information on where terminated
    Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
    "SAVE_DESIGN".
    The main program was "/***/SAPLCUORDER_N ".
    In the source code you have the termination point in line 594
    of the (Include) program "/***/LCUORDER_NF07".
    Source Code Extract
    Line
    SourceCde
    564
    ENDIF .
    565
    ENDLOOP .
    566
    IF l_ret-type = 'E' OR
    567
    l_ret-type = 'A' .
    568
    CLEAR: save_okcode .
    569
    570
    Show Messages
    571
    CALL FUNCTION '/***/N_LOG_ADD_MSG'
    572
    EXPORTING
    573
    i_log_type = 'G'
    574
    TABLES
    575
    t_ret      = t_ret.
    576
    PERFORM log_order_create_show  .
    577
    Show first Message
    578
         MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
    579
         WITH
    580
           l_ret-message_v1 l_ret-message_v2
    581
           l_ret-message_v3 l_ret-message_v4.
    582
    CALL FUNCTION '/***/N_DESIGN_INIT' .
    583
    ELSE .
    584
    IF g_design_mode = con_mode_crea.
    585
    Need to update DMS documents with real design number
    586
    PERFORM document_prepare_002 USING con_desnum_tmp_1
    587
    lv_desnum.
    588
    ENDIF.
    589
    Commit design BAPI's
    590
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
    591
    592
    IF save_okcode = con_order.
    593
    Commit order BAPI's
    >>>>>
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    595
    DESTINATION 'NONE'.
    596
    597
    call of fct. RFC_CONNECTION_CLOSE is important to get a new
    598
    initial roll area with initial internal tables next time
    599
    CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    600
    EXPORTING
    601
    destination          = 'NONE'
    602
    EXCEPTIONS
    603
    destination_not_open = 1
    604
    OTHERS               = 2.
    605
    ENDIF.
    606
    607
    IF lv_desnum IS INITIAL .
    608
    lv_desnum = /***/cudesign-desnum .
    609
    ENDIF .
    610
    SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
    611
        Changes saved
    612
    MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
    613
    ENDIF .
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    0
    SY-TABIX
    1
    SY-DBCNT
    1
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    2000
    SY-UCOMM
    CU01
    SY-TITLE
    Change Design: 50000109
    SY-MSGTY
    X
    SY-MSGID
    00
    SY-MSGNO
    341
    SY-MSGV1
    MESSAGE_TYPE_X
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20070827
    SY-UZEIT
    180110
    SY-XPROG
    SAPMSSY1
    SY-XFORM
    XAB_READ
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    4 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF07                    594
    SAVE_DESIGN
    3 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF07                   2616
    CHECK_AND_SAVE_F07
    2 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF04                    311
    USER_COMMAND_D2000
    1 MODULE (PAI) /***/SAPLCUORDER_N                  /***/LCUORDER_NI05                     28
    USER_COMMAND_2000
    Chosen variables
    Name
    Val.
    No.       4 Ty.          FORM
    Name  SAVE_DESIGN
    %_DUMMY$$
    2222
    0000
    0000
    0000
    CL_GUI_RESOURCES=>COL_TEXTAREA
    31
    1000
    F000
    G_DESIGN_MODE
    R
    5
    2
    0
    0
    CON_MODE_CREA
    I
    4
    9
    0
    0
    GT_NODE_CUI
    Table[initial]
    SY-REPID
    /***/SAPLCUORDER_N
    2454254544545445542222222222222222222222
    F35DF310C35F2452FE0000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    CON_DESNUM_TMP_1
    TM00000001CY
    543333333345
    4D0000000139
    000000000000
    000000000000
    LV_DESNUM
    222222222222
    000000000000
    000000000000
    000000000000
    SAVE_OKCODE
    CU01
    4533222222222222222222222222222222222222222222222222222222222222222222
    3501000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    CON_ORDER
    CU01
    4533222222222222222222222222222222222222222222222222222222222222222222
    3501000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    SY-XPROG
    SAPMSSY1
    5454555322222222222222222222222222222222
    310D339100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    CON_DELETE
    LVMS
    4545222222222222222222222222222222222222222222222222222222222222222222
    C6D3000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    No.       3 Ty.          FORM
    Name  CHECK_AND_SAVE_F07
    CL_GUI_ALV_GRID=>MC_MB_VIEW
    &MB_VIEW
    2445544522222222222222222222222222222222222222222222222222222222222222
    6D2F695700000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    GT_OP
    Table IT_303[2x1320]
    PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
    Table reference: 118
    TABH+  0(20) = 7039FC3C5824DB3C00000000760000002F010000
    TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
    TABH+ 40( 8) = 08000000C1308001
    store        = 0x7039FC3C
    ext1         = 0x5824DB3C
    shmId        = 0     (0x00000000)
    id           = 118   (0x76000000)
    label        = 303   (0x2F010000)
    fill         = 2     (0x02000000)
    leng         = 1320  (0x28050000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000093
    occu         = 8     (0x08000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x2010FC3C
    pgHook       = 0x00000000
    idxPtr       = 0x00000000
    shmTabhSet   = 0x00000000
    id           = 234   (0xEA000000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 8     (0x08000000)
    lineAlloc    = 8     (0x08000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x60B7153D
    collHook     = 0x00000000
    ext2         = 0x1024DB3C
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0xE00FFC3C
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    G_BADI_PROGRAM
    2222222222222222222222222222222222222222
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    LOG_ERROR
    2
    0
    0
    0
    CON_BUTT_DELETED
    @11QDelete@
    43355466676422222222222222222222222222222222
    011C145C545000000000000000000000000000000000
    00000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000
    G_CU_EXIT_CU_EXPLODE
    F0000000
    F0000000
    /***/CUDESIGN-OBJNR
    CY00000000000000008835
    4533333333333333333333
    3900000000000000008835
    0000000000000000000000
    0000000000000000000000
    CL_GUI_RESOURCES=>COL_TEXTAREA
    31
    1000
    F000
    G_SEC_COUNT
    0
    0000
    0000
    LV_UPD
    X
    5
    8
    0
    0
    %_SPACE
    2
    0
    0
    0
    GS_ROW_NO
    0.0.0.1.
    0000
    1000
    0000
    0000
    SCREEN
    /***/CUDESIGN-GLTRP
    2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
    F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SY-MSGID
    00
    33222222222222222222
    00000000000000000000
    00000000000000000000
    00000000000000000000
    SWO_%CONTAINER
    000000000
    2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SPACE
    2
    0
    0
    0
    SY-MSGNO
    341
    333
    341
    000
    000
    /***/CVCUI-CUTYP
    2
    0
    0
    0
    SY-MSGV1
    MESSAGE_TYPE_X
    44554445555455222222222222222222222222222222222222
    D533175F4905F8000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    No.       2 Ty.          FORM
    Name  USER_COMMAND_D2000
    /***/CVCUI
    0.0.0.0.0.0.0.1.                                                                         000000
    2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SYST-REPID
    /***/SAPLCUORDER_N
    2454254544545445542222222222222222222222
    F35DF310C35F2452FE0000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    CON_MODE_COPY
    C
    4
    3
    0
    0
    LT_BAPI_RETURN
    Table IT_1778[2x1088]
    PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
    Table reference: 310
    TABH+  0(20) = 8837083D407E1C3D0000000036010000F2060000
    TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
    TABH+ 40( 8) = 08000000C1308101
    store        = 0x8837083D
    ext1         = 0x407E1C3D
    shmId        = 0     (0x00000000)
    id           = 310   (0x36010000)
    label        = 1778  (0xF2060000)
    fill         = 2     (0x02000000)
    leng         = 1088  (0x40040000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000113
    occu         = 8     (0x08000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 1
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x50C6073D
    pgHook       = 0x00000000
    idxPtr       = 0x00000000
    shmTabhSet   = 0x00000000
    id           = 1534  (0xFE050000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 8     (0x08000000)
    lineAlloc    = 8     (0x08000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x00000000
    collHook     = 0x00000000
    ext2         = 0x6067033D
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0xE82F063D
    delta_head   = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    CON_MODE_ORDE
    O
    4
    F
    0
    0
    TGSBT
    22222222222222222222222222222222222222
    00000000000000000000000000000000000000
    00000000000000000000000000000000000000
    00000000000000000000000000000000000000
    CL_GUI_RESOURCES=>COL_TEXTAREA
    31
    1000
    F000
    LS_NUMBERS-AUFNR_NEW
    000001000677
    333333333333
    000001000677
    000000000000
    000000000000
    T024I
    200UT10100PG for Term & Comp
    33355333335426672567622246672222222222222222
    20054101000706F20452D0603FD00000000000000000
    00000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000
    LS_T399X
    200UT10UM01                  X    INST  30UT01UT01
    3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
    20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    CON_VBKZ_U
    U
    5
    5
    0
    0
    /***/CU_ORDER_IO-DISP_FACTOR
    2097152
    0
    0
    LS_DESIGN
    200########000050000109DDCY00000000000000008835PROFILE1  0001UT10UM0100220100MWH001
    333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
    200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
    000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
    /***/CUDESIGN
    200########000050000109DDCY00000000000000008835PROFILE1  0001UT10UM0100220100MWH001
    333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
    200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
    000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
    G_DROP_COUNT
    0
    0000
    0000
    LS_DESIGN-DESNUM
    000050000109
    333333333333
    000050000109
    000000000000
    000000000000
    No.       1 Ty.          MODULE (PAI)
    Name  USER_COMMAND_2000
    GT_SELTAB_INIT
    Table[initial]
    Internal notes
    The termination was triggered in function "RfcExtendedReceive"
    of the SAP kernel, in line 422 of the module
    "//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
    The internal operation just processed is "FUNC".
    Internal mode was started at 20070827180011.
    Status of connection:
    RFC state: " "
    RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
    CPI-C error text: "The current application triggered a termination with a short
    dump."
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : disp+work.EXE (pid=26488)
    When      : 8/27/2007 18:1:10.942
    Threads   : 2
    Computer Name       : MB1ES1005
    User Name           : ec6adm
    Number of Processors: 2
    Processor Type: x86 Family 15 Model 4 Stepping 10
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id 5e10
    eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
    eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0         nv up ei ng nz ac po cy
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00200297
    function : KiFastSystemCallRet
    7c82ed54 c3               ret
    7c82ed55 8da42400000000   lea     esp,[esp]              ss:056d71f0=7c822124
    7c82ed5c 8d642400         lea     esp,[esp]              ss:62bd5803=00000000
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
    056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
    056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess  (ntstcdbg.c (501))
    056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack  (dptstack.c (1367))
    056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2  (dptstack.c (352))
    056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack  (dptstack.c (182))
    056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
    056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax  (abrabax.c (1243))
    056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message  (abrfcrcv.c (422))
    056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
    056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive  (abrfcrcv.c (59))
    056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get  (abfunc.c (5103))
    056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
    056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc  (abfunc.c (554))
    056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri  (abextri.c (552))
    056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent  (abrunt1.c (281))
    056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep  (abdynpro.c (492))
    056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal  (dymainstp.c (2398))
    056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0  (dymainstp.c (1004))
    056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl  (dymainstp.c (360))
    056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00  (dymain.c (1628))
    056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00  (thxxhead.c (4773))
    056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop  (thxxhead.c (4455))
    056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart  (thxxhead.c (1173))
    056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain  (dpxxdisp.c (1121))
    056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main  (thxxanf.c (82))
    056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup  (crtexe.c (395))
    056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
    State Dump for Thread Id 61fc
    eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
    eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0         nv up ei pl zr na po nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
    function : KiFastSystemCallRet
    7c82ed54 c3               ret
    7c82ed55 8da42400000000   lea     esp,[esp]              ss:0799fec0=7c821514
    7c82ed5c 8d642400         lea     esp,[esp]              ss:64e9e4d3=00000000
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
    0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc  (signt.c (610))
    0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
    0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
    List of ABAP programs affected
    Index
    Typ
    Program
    Group
    Date
    Time
    Size
    Lang.
    0
    Prg
    /***/SAPLCUORDER_N
    0
    10.08.2007
    10:12:44
    541696
    E
    1
    Typ
    /***/CUDESIGN
    0
    10.08.2007
    10:05:19
    7168
    2
    Typ
    /***/CU_ORDER_IO
    0
    10.08.2007
    09:53:38
    4096
    3
    Typ
    /***/DESTYPE
    0
    10.08.2007
    10:05:21
    2048
    4
    Typ
    /***/PRF_ORD
    0
    10.08.2007
    10:05:21
    4096
    5
    Prg
    SAPMSSYD
    0
    04.04.2007
    10:28:36
    21504
    E
    6
    Prg
    SAPFSYSCALLS
    0
    09.09.2004
    14:18:32
    8192
    E
    7
    Typ
    /***/G_CUST
    0
    10.08.2007
    09:53:39
    3072
    8
    Prg
    /***/SAPLTABLES
    8
    10.08.2007
    10:13:00
    19456
    E
    9
    Typ
    /***/G_CHAR
    0
    10.08.2007
    10:05:21
    3072
    10
    Prg
    SAPLCTCE
    10
    09.09.2004
    14:18:34
    9216
    E
    11
    Typ
    CABN
    0
    18.09.2001
    10:02:26
    12288
    12
    Prg
    SAPLICON
    12
    04.04.2007
    10:10:28
    27648
    E
    13
    Prg
    %_CICON
    12
    07.02.2006
    10:40:00
    104448
    E
    14
    Typ
    ICONT
    0
    04.04.2007
    10:10:08
    2048
    15
    Typ
    NRIV
    0
    02.04.1998
    08:14:54
    3072
    16
    Prg
    SAPLBSVA
    16
    04.04.2007
    14:47:00
    296960
    E
    17
    Typ
    /***/CU_ORDER_S_OP_N
    0
    10.08.2007
    09:53:39
    14336
    18
    Prg
    CL_GUI_CONTROL================CP
    18
    28.02.2005
    21:03:09
    112640
    E
    19
    Prg
    %_CCNTL
    18
    18.02.2005
    14:15:08
    15360
    E
    20
    Typ
    OBJ_RECORD
    0
    14.02.1998
    08:30:43
    2048
    21
    Prg
    CL_GUI_OBJECT=================CP
    21
    05.07.2005
    13:10:15
    375808
    E
    22
    Prg
    CL_GUI_CFW====================CP
    22
    28.02.2005
    21:03:09
    172032
    E
    23
    Prg
    CL_GUI_PROPS_CONSUMER=========CP
    23
    18.02.2005
    14:15:08
    30720
    E
    24
    Prg
    SAPLTHFB
    24
    04.04.2007
    13:24:38
    390144
    E
    25
    Typ
    EUDB
    0
    06.11.2003
    20:28:08
    8192
    26
    Prg
    SAPLSFES
    26
    08.08.2007
    16:46:17
    259072
    E
    27
    Prg
    SAPLSPLUGIN
    27
    09.09.2004
    14:18:36
    8192
    E
    28
    Prg
    SAPLSTTM

    Yes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back.  Suddenly it has started giving us this dump.
    The code is as follows.
    Commit design BAPI's
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
          IF save_okcode = con_order.
    Commit order BAPI's
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
              DESTINATION 'NONE'.
    Here con_order is CU01.
    Please let me know if anybody has faced this problem earlier.
    Thanks in Advance
    Meghana

  • RE: Short dump after activation of BADI

    Hi all,
    We are getting short dumps in all the transactions after activating the BADI  'BADI_LAYER'
    We are not able to execute any of the transactions.
    The details of runtimeerror
    Runtime Errors         RAISE_EXCEPTION
    Date and Time          30.07.2007 09:58:06
    Short text
    Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
    exception
    condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
    "GET_INSTANCE"
    or
    "CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
    or
    "SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "sapdevp"
    Network address...... "192.168.0.205"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 80686"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "SAPDEVP"
    Database type..... "ORACLE"
    Database name..... "TDV"
    Database user ID.. "SAPSR4"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Apr 2 2006 23:08:16"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10103_SHARE "
    Patch level. 52
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 6271344
    Heap.... 0
    Page.... 57344
    MM Used. 1728072
    MM Free. 360856
    User and Transaction
    Client.............. 400
    User................ "FIUSER01"
    Language key........ "E"
    Transaction......... "FB50 "
    Program............. "CL_EXITHANDLER================CP"
    Screen.............. "SAPMF05A 1010"
    Screen line......... 7
    Information on where terminated
    Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
    in "GET_INSTANCE".
    The main program was "SAPMF05A ".
    In the source code you have the termination point in line 145
    of the (Include) program "CL_EXITHANDLER================CM001".
    Source Code Extract
    Line
    SourceCde
    115
    SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
    116
    WHERE badi_name = mig_badi_name.
    117
    IF sy-subrc NE 0.
    118
          not yet filled
    119
    is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
    120
    ENDIF.
    121
    122
    IF is_impl = 'X'.
    123
          ok at least one implementation found
    124
    act_imp_existing = 'X'.
    125
    ENDIF.
    126
    127
    ENDIF.
    128
    ENDIF.
    129
    ELSE.
    130
    131
    check how many implementations exist for an exit
    132
    CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
    133
    EXPORTING
    134
    runtime_call                  = seex_true
    135
    exit_name                     = exit_name
    136
    EXCEPTIONS
    137
    singular_exit_multiply_active = 1
    138
    no_active_implementation      = 2
    139
    only_default_implementation   = 3
    140
    OTHERS                        = 4.
    141
    CASE sy-subrc.
    142
    WHEN 0.
    143
    act_imp_existing = seex_true.
    144
    WHEN 1.
    >>>>>
    RAISE single_exit_multiply_active.
    146
    WHEN 2.
    147
    act_imp_existing = seex_false.
    148
    WHEN 3.
    149
    act_imp_existing = seex_false.
    150
    def_impl = seex_true.
    151
    WHEN 4.
    152
    RAISE data_incons_in_exit_managem.
    153
    ENDCASE.
    154
    155
    new parameter considered for performance purposes
    156
    IF act_imp_existing = seex_true OR
    157
    def_impl = seex_true OR
    158
    null_instance_accepted = seex_false.
    159
    160
    ok, then do your job
    161
    CREATE OBJECT exit TYPE (abs_type_classname).
    162
    CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
    163
    instance ?= exit.
    164
    ENDCATCH.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    1
    SY-INDEX
    0
    SY-TABIX
    0
    SY-DBCNT
    2
    SY-FDPOS
    1
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    FSKB
    SY-UCOMM
    SY-TITLE
    Enter G/L Account Document: Company Code TJ01
    SY-MSGTY
    S
    SY-MSGID
    B!
    SY-MSGNO
    015
    SY-MSGV1
    00001140
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20070730
    SY-UZEIT
    095806
    SY-XPROG
    SY-XFORM
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    5 METHOD       CL_EXITHANDLER================CP    CL_EXITHANDLER================CM001   145
    CL_EXITHANDLER=>GET_INSTANCE
    4 METHOD       CL_EXIT_MASTER================CP    CL_EXIT_MASTER================CM004     2
    CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
    3 METHOD       CL_EX_FI_HEADER_SUB_1300======CP    CL_EX_FI_HEADER_SUB_1300======CM003    53
    CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
    2 FORM         SAPMF05A                            MF05AF00_D0100_PRE_APPL_SUB_2          50
    D0100_PRE_APPL_SUB_PBO
    1 MODULE (PBO) SAPMF05A                            MF05AO00_D0100_PRE_APPL_SUB            10
    D0100_PRE_APPL_SUB
    Chosen variables
    Name
    Val.
    No.       5 Ty.          METHOD
    Name  CL_EXITHANDLER=>GET_INSTANCE
    EXIT_NAME
    BADI_LAYER
    44445445452222222222
    2149FC19520000000000
    00000000000000000000
    00000000000000000000
    NULL_INSTANCE_ACCEPTED
    2
    0
    0
    0
    ACT_IMP_EXISTING
    2
    0
    0
    0
    INSTANCE
    F0000000
    F0000000
    %_SPACE
    2
    0
    0
    0
    RSJOBINFO
    00000000000000                                  ##
    2222222222222222222222222222222233333333333333222222222222222222222222222222222200
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SEEX_TRUE
    X
    5
    8
    0
    0
    SYST-REPID
    CL_EXITHANDLER================CP
    4454545444444533333333333333334522222222
    3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    <%_TABLE_BADIISIMPLED>
    SY-REPID
    CL_EXITHANDLER================CP
    4454545444444533333333333333334522222222
    3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SY-SUBRC
    1
    0000
    1000
    SY-XPROG
    2222222222222222222222222222222222222222
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    No.       4 Ty.          METHOD
    Name  CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
    %_SPACE
    2
    0
    0
    0
    SYST-REPID
    CL_EXIT_MASTER================CP
    4454545544554533333333333333334522222222
    3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SY-REPID
    CL_EXIT_MASTER================CP
    4454545544554533333333333333334522222222
    3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    CL_EXIT_MASTER=>LAYER_EXIT
    F0000000
    F0000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.       3 Ty.          METHOD
    Name  CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
    IM_BKPF
    TJ01          2007SA00000000200707300400000000000000000000000000000000000000
    2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
    0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    IM_X_NO_INPUT
    2
    0
    0
    0
    FLT_VAL
    IN
    44
    9E
    00
    00
    <EXIT_OBJ>-IMP_CLASS
    <FLT_CACHE_LINE>-OBJ
    |
    | F0000000 |
    | F0000000 |
    | %_DUMMY$$ |
    |  |
    | 2222 |
    | 0000 |
    | 0000 |
    | 0000 |
    | ME->INSTANCE_BADI_TABLE |
    | Table[initial] |
    | <EXIT_OBJ> |
    | ??? |
    | ?????? |
    | ?????? |
    | <%_L001> |
    | ??? |
    | ?????? |
    | ?????? |
    | RSJOBINFO |
    | 00000000000000                                  ## |
    | 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
    | 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
    | 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
    | 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
    | SY-REPID |
    | CL_EX_FI_HEADER_SUB_1300======CP |
    | 4454554454444455554533333333334522222222 |
    | 3CF58F69F851452F352F1300DDDDDD3000000000 |
    | 0000000000000000000000000000000000000000 |
    | 0000000000000000000000000000000000000000 |
    | <%_L001>-METHOD_NAME |
    | ??? |
    | ?????? |
    | ?????? |
    | EXIT_OBJ_TAB |
    | Table[initial] |
    | SY-SUBRC |
    | 1 |
    | 0000 |
    | 1000 |
    | ME |
    |
    F0000000
    C0003000
    SXRT_TRUE
    X
    5
    8
    0
    0
    No.       2 Ty.          FORM
    Name  D0100_PRE_APPL_SUB_PBO
    *BSEG-STBUK
    2222
    0000
    0000
    0000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SY-REPID
    SAPMF05A
    5454433422222222222222222222222222222222
    310D605100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SYST-REPID
    SAPMF05A
    5454433422222222222222222222222222222222
    310D605100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    KDBTAB-DMBTR
    0.0.0.0.0.0.1.
    0000000
    000000C
    %_SPACE
    2
    0
    0
    0
    KDPTAB-BELNR
    2222222222
    0000000000
    0000000000
    0000000000
    KDPTAB-GJAHR
    0000
    3333
    0000
    0000
    0000
    KDPTAB-BUZEI
    000
    333
    000
    000
    000
    KDBTAB-XRUND
    2
    0
    0
    0
    SPACE
    2
    0
    0
    0
    F05ACTRL
    2
    0
    0
    0
    SYST
    ######################################ð#######################################~######### C####
    00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
    000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
    00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
    BSED
    0000000# ##############  0000000000000000
    2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
    00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
    SY-SUBRC
    1
    0000
    1000
    G_APPL_SUB_ACTIVE
    X
    5
    8
    0
    0
    CHAR_X
    X
    5
    8
    0
    0
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    BKPF-BUKRS
    TJ01
    5433
    4A01
    0000
    0000
    BKPF
    TJ01          2007SA00000000200707300400000000000000000000000000000000000000
    2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
    0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    G_APPL_SUB_DISABLE
    2
    0
    0
    0
    T005-INTCA
    IN
    44
    9E
    00
    00
    No.       1 Ty.          MODULE (PBO)
    Name  D0100_PRE_APPL_SUB
    C_FIELD_DIALOG_ALL
    BUTTON_DIALOG_ALL
    4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
    2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Internal notes
    The termination was triggered in function "ab_jfune"
    of the SAP kernel, in line 2561 of the module
    "//bas/700_REL/src/krn/runt/abfunc.c#10".
    The internal operation just processed is "FUNE".
    Internal mode was started at 20070730095806.
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : disp+work.EXE (pid=4436)
    When      : 7/30/2007 9:58:6.359
    Threads   : 2
    Computer Name       : SAPDEVP
    User Name           : SAPServiceTDV
    Number of Processors: 4
    Processor Type: x86 Family 6 Model 15 Stepping 6
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id 250c
    eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
    eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0         nv up ei ng nz ac po cy
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00200297
    function : KiFastSystemCallRet
    7c82ed54 c3               ret
    7c82ed55 8da42400000000   lea     esp,[esp]              ss:053fceb4=7c822124
    7c82ed5c 8d642400         lea     esp,[esp]              ss:6627b4c7=00002100
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
    053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
    053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
    053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
    053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
    053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
    053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
    053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
    053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
    053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
    053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
    053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
    053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
    053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
    053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
    053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
    053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
    053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
    053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
    053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
    053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
    053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
    053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
    State Dump for Thread Id 27bc
    eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
    eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0         nv up ei pl zr na po nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
    function : KiFastSystemCallRet
    7c82ed54 c3               ret
    7c82ed55 8da42400000000   lea     esp,[esp]              ss:075dfec0=7c821514
    7c82ed5c 8d642400         lea     esp,[esp]              ss:6845e4d3=50004500
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
    075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
    075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
    075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
    List of ABAP programs affected
    Index
    Typ
    Program
    Group
    Date
    Time
    Size
    Lang.
    0
    Prg
    SAPMF05A
    0
    22.05.2007
    11:37:49
    1563648
    E
    1
    Prg
    SAPMSSYD
    0
    10.01.2007
    12:33:28
    21504
    E
    2
    Prg
    SAPFSYSCALLS
    0
    09.09.2004
    14:18:32
    8192
    E
    3
    Typ
    TFDIR
    0
    13.02.2005
    17:31:57
    3072
    4
    Prg
    SAPLAPAR_EBPP_SERVICES
    4
    03.01.2007
    11:23:55
    114688
    E
    5
    Typ
    T042ZEBPP
    0
    08.01.2002
    14:42:24
    2048
    6
    Typ
    T020
    0
    24.02.1999
    03:17:19
    3072
    7
    Typ
    RFOPT2
    0
    11.12.2003
    15:00:17
    5120
    8
    Prg
    SAPFF001
    0
    22.05.2007
    11:37:49
    195584
    E
    9
    Typ
    SWOTOBJID
    0
    04.05.1995
    15:20:52
    2048
    10
    Prg
    SAPLSWOR
    10
    10.01.2007
    12:33:34
    292864
    E
    11
    Typ
    TFBUF
    0
    30.11.1998
    22:08:34
    3072
    12
    Typ
    ACC_KONTEXT
    0
    08.01.2003
    17:30:26
    3072
    13
    Typ
    BKPF
    0
    13.03.2006
    11:01:29
    18432
    14
    Prg
    SAPLFACSCORE
    14
    01.12.2006
    22:00:12
    13312
    E
    15
    Typ
    T001
    0
    25.08.2005
    22:03:13
    13312
    16
    Prg
    SAPLACHD
    16
    03.01.2007
    11:23:55
    51200
    E
    17
    Prg
    SAPFSPOR
    0
    09.09.2004
    14:18:32
    15360
    E
    18
    Prg
    SAPLSCNT
    18
    18.02.2005
    14:16:06
    30720
    E
    19
    Typ
    DYCBOX
    0
    20.08.1998
    11:16:53
    3072
    20
    Prg
    SAPLSVSM
    20
    18.02.2005
    14:16:06
    27648
    E
    21
    Prg
    SAPLSGUI
    21
    10.01.2007
    12:33:33
    82944
    E
    22
    Prg
    SAPLSTTM
    22
    05.07.2005
    13:10:18
    69632
    E
    23
    Prg
    SAPLSBDC
    23
    05.07.2005
    13:10:18
    44032
    E
    24
    Prg
    CL_DATAPROVIDER===============CP
    24
    28.02.2005
    21:00:46
    49152
    E
    25
    Prg
    %_CCNTL
    24
    18.02.2005
    14:15:08
    15360
    E
    26
    Typ
    OBJ_RECORD
    0
    14.02.1998
    08:30:43
    2048
    27
    Prg
    SAPLSTUP
    27
    08.03.2005
    19:04:31
    73728
    E
    28
    Prg
    SAPLCNDP
    28
    01.12.2006
    22:04:33
    193536
    E
    29
    Prg
    SAPSHDTV
    18
    05.01.2005
    16:26:16
    33792
    E
    30
    Typ
    SHDSTU
    0
    14.12.1998
    23:15:34
    2048
    31
    Typ
    SHDSTCIU
    0
    14.12.1998
    23:15:34
    2048
    32
    Prg
    SAPFGUICNTL
    0
    18.02.2005
    14:15:08
    24576
    E
    33
    Prg
    SAPLOLEA
    33
    05.07.2005
    13:10:18
    96256
    E
    34
    Prg
    SAPLSFES
    34
    10.01.2007
    13:26:20
    256000
    E
    35
    Prg
    SAPLSPLUGIN
    35
    09.09.2004
    14:18:36
    8192
    E
    36
    Typ
    ARFCRDATA
    0
    13.02.2005
    18:20:24
    7168
    37
    Prg
    SAPLGRFC
    37
    13.02.2005
    18:20:25
    16384
    E
    38
    Typ
    SWCBCONT
    0
    15.11.2000
    17:55:11
    3072
    39
    Typ
    OLE_VERBS
    0
    04.04.1995
    16:02:20
    2048
    40
    Typ
    OLE_PA
    0
    04.04.1995
    16:02:19
    2048
    41
    Typ
    ACGL_HEAD
    0
    11.12.2003
    14:59:21
    8192
    42
    Typ
    RF05A
    0
    11.04.2005
    11:50:21
    38912
    43
    Typ
    TCURC
    0
    01.12.1999
    12:14:40
    2048
    44
    Prg
    SAPLFAGL_ACTIVATION_SERVICES
    44
    30.04.2007
    17:00:55
    45056
    E
    45
    Prg
    SAPLSTR9
    45
    09.05.2006
    10:39:47
    39936
    E
    46
    Prg
    CONTEXT_X_TR_SYS_PARAMS
    45
    09.05.2006
    10:39:47
    40960
    E
    47
    Typ
    TCONT
    0
    09.09.2004
    14:18:43
    2048
    48
    Typ
    CONTEXTB
    0
    09.09.2004
    14:15:52
    6144
    49
    Typ
    FAGL_ACTIVEC
    0
    19.08.2004
    16:55:10
    5120
    50
    Typ
    FAGL_CHECK_SETUP
    0
    11.12.2003
    15:01:05
    2048
    51
    Prg
    SAPLSHD0
    51
    03.01.2007
    06:52:22
    232448
    E
    52
    Prg
    SAPLBFFM3
    52
    10.01.2007
    13:15:21
    169984
    E
    53
    Typ
    OFIWA
    0
    15.04.1998
    00:11:05
    2048
    54
    Typ
    FTEXTS
    0
    20.08.2001
    12:13:26
    3072
    55
    Prg
    SAPLITSR
    55
    10.01.2007
    14:23:52
    107520
    E
    56
    Typ
    FMRFC
    0
    13.08.1997
    12:32:59
    2048
    57
    Typ
    TBE01
    0
    20.01.2003
    16:41:38
    2048
    58
    Typ
    TBE31
    0
    03.09.1997
    03:01:11
    2048
    59
    Typ
    TBE31
    0
    03.09.1997
    03:01:11
    2048
    60
    Typ
    TBE11
    0
    03.09.1997
    03:01:06
    2048
    61
    Prg
    CONTEXT_X_SP_INFO
    55

    Hello Sowmya
    The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
    Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
    If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
    Regards
      Uwe

  • BCS Release Request Short dump

    Hello,
    I'm trying to release my costumizing request, that contains the SEM-BCS configuration, although i'm getting a short-dump.
    The description is as follows:
    Short text
        Access via 'NULL' object reference not possible.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: " ").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "OBJECTS_OBJREF_NOT_ASSIGNED" " "
        "CL_UG_MD_TR_METHOD_EXPORT=====CP" or "CL_UG_MD_TR_METHOD_EXPORT=====CM003"
        "UGMD_EXTRACT_SID_2"
    Information on where terminated
        Termination occurred in the ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" -
         in "UGMD_EXTRACT_SID_2".
        The main program was "RDDM0001 ".
        In the source code you have the termination point in line 62
        of the (Include) program "CL_UG_MD_TR_METHOD_EXPORT=====CM003".
    Source Code Extract
    Line  SourceCde
       32   FIELD-SYMBOLS <lt_table> TYPE INDEX TABLE.
       33   FIELD-SYMBOLS <ld_fsid> TYPE ug_sid.
       34   FIELD-SYMBOLS <ld_vsid> TYPE ug_sid.
       35 *  FIELD-SYMBOLS <lt_target> TYPE ANY TABLE.
       36
       37   ASSIGN io_itab->rd_wa->* TO <ls_wa>.
       38   IF i_value_sid IS NOT INITIAL.
       39     ASSIGN COMPONENT i_value_sid
       40            OF STRUCTURE <ls_wa>
       41            TO <ld_vsid>.
       42     CHECK sy-subrc = 0.
       43   ELSE.
       44     CREATE DATA lr_sid.
       45     ASSIGN lr_sid->* TO <ld_vsid>.
       46     CLEAR <ld_vsid>.
       47   ENDIF.
       48
       49   IF NOT i_fieldname_sid IS INITIAL.                  "Start hah160603.1
       50     ASSIGN COMPONENT i_fieldname_sid
       51            OF STRUCTURE <ls_wa>
       52            TO <ld_fsid>.
       53     CHECK sy-subrc = 0.
       54   ELSE.
       55     CALL METHOD ugmd_get_fieldname_to_table
       56       EXPORTING
       57         i_tabname = i_datainfo-tabname
       58       IMPORTING
       59         e_fieldname = ld_fieldname.
       60     lo_fieldname = cl_ug_md_fieldname=>if_ug_md_fieldname~get_instance(
       61       ld_fieldname ).
       62  >>>>>     ld_fieldname_sid_fix = lo_fieldname->ds_data-sid.
       63     ASSIGN ld_fieldname_sid_fix TO <ld_fsid>.
       64   ENDIF.                                                "End hah160603.1
       65
    Contents of system fields
    Name     Val.
    SY-SUBRC 0
    SY-INDEX 1
    SY-TABIX 0
    SY-DBCNT 0
    SY-FDPOS 0
    SY-LSIND 1
    SY-PAGNO 0
    SY-LINNO 1
    SY-COLNO 1
    SY-PFKEY TDR_FULL
    SY-UCOMM REFR
    SY-TITLE Transport organizer: ordens
    SY-MSGTY I
    SY-MSGID FINB_TR
    SY-MSGNO 009
    SY-MSGV1 &
    SY-MSGV2 &
    SY-MSGV3
    SY-MSGV4
    SY-MODNO 0
    SY-DATUM 20080904
    SY-UZEIT 200112
    SY-XPROG SAPLSYST
    SY-XFORM SYSTEM_HOOK_OPEN_DATASET
    If someone have gone trough a similar experience, or have any tip of how to solve this issue, i'd apreciate a comment.
    Will award points for valuable help.
    Thank you

    Hi Ricardo,
    You tried to transport the BCS' configuration, right?
    If in the request was the full set of settings from the start of the project, the it will definitely fail.
    There are some restrictions in BCS transport. See, for example the OSS Note #627924 - 'Restrictions with transport in BW-based SEM-BCS'. It particularly says:
    "For the initial system setup, and after substantial changes in the data model, you should transport the Customizing by means of manually created transport requests. We advise you not to use the automatic recording of all Customizing settings during the first implementation phase in the development system and not to use this request for the structure of the test and productive systems.
    During the transport of a new consolidation area, the following settings should be transported in the following sequence:
    1. Data basis
    2. Consolidation area
    3. Special versions
    After the import of the data basis and the consolidation area, these settings should be checked in the target system. In particular, the RFC destination, the InfoCubes and ODS objects, as well as the InfoObjects. Note that RFC destinations, InfoCubes, ODS objects, virtual cubes and InfoObjects cannot be transported from the consolidation workbench with the transport functions. For instance, you have to transport and activate the InfoCubes and InfoObjects using the BW."
    I usually transport the BCS setting in a little transport requests in this order:
    - all BW objects and settings
    - data basis (with source DB)
    - cons area
    - special versions
    - versions
    - master data
    ...etc.
    Hope this helps.

  • Empty System Fields after error creates a short dump

    Hello!
    Could someone please help me?
    After calling a function, I catch errors with sy-subrc NE 0.
    Handling this error the "normal" way throws a short dump (I marked the row bold), because all the system fields are empty!
    Could someone please give me a hint, how to handle this situation?
    Many thanx in advance!
    Perhaps some code:
    CALL FUNCTION 'Z_CONFIRM'
      EXPORTING
        is_bdnum      = is_bed-bdnum
      TABLES
        et_return     = lt_return
      EXCEPTIONS
        error_occured = 1
        lock_error    = 2
      OTHERS        = 3.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    I get a short dump with this:
    Content of the system fields
    Name
    Wert
    SY-SUBRC
    1
    SY-INDEX
    1
    SY-TABIX
    1
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    HTTP-Steuerung
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20080117
    SY-UZEIT
    080907
    SY-XPROG
    SY-XFORM

    Hi,
    You need to capture the message like this way
    IF sy-subrc eq 1.
       message e999(your mesage class) with 'Error Occured'.
    endif.
    IF sy-subrc eq 2.
       message e999(your mesage class) with 'Lock error'.
    endif.
    IF sy-subrc eq 3.
       message e999(your mesage class) with 'Other Errors'.
    endif.
    a®

Maybe you are looking for

  • Problems connecting RAZR via Bluetooth

    Hey guys... I have an iBook G4 1.33MHz running 10.4.7 but, for some reason, my RAZR will not pair with my iBook. It just will flat out not discover it. I go to my phone, click on discoverable, and let that run. Meahwhile, I run the wizzard to connect

  • Has anyone maxed out their mac?

    i ask this out of curiosity for the bigger and faster machines. i can understand the needs and wants for faster, but has anyone maxed out their mac? and with what? i have lots installed and running on mine im sure not as much as a lot of people, but

  • AS window in leopard shows anti aliased font. Fix?

    I was using CS3 no problem, but when I upgraded to leopard on my mac, the cs3 actionscript window shows all anti aliased text. The standard text in morocco 10, which it is set to. I know that I can go into preferences in leopard and change the aliase

  • Order table data with comparing rows

    Hi, My question is... I have table with with 5 columns this actually is been loaded from a file and there is no direct PK, but for that combination of columns as used to make them unique code, person, case Table X CODE             CASE              O

  • Videos need more time to load in safari!

    VIdeos need longer to load and when i press the play button it plays only 7sec. iOS 7 was bether in this!!