Dbl clk .pkg brings up PackageMaker instead of the installer

I am trying to upgrade OS 10.4.7 to 10.4.8 on a Dual G5. I can't get a new airport card to work (which is my connection to the internet). I downloaded the OS update on my G3 laptop. If I dbl clk on it on the laptop, the installer starts up. I saved the OS update on a USB flash drive. Sneaker net to my Dual G5. Dbl-clk on the G5 and PackageMaker (not the installer) comes up. I haven't been able to get the installer to start. How do I get the installer to come up on my dual G5?

Select the icon for the installer package and press COMMAND-I to open the Get Info window. In the section labeled Open With select Installer from the drop down menu then click on the Change All button. If Installer is not listed in the drop down menu then use Other and navigate to the Utilities folder to select it.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

Before I got my Iphone 5 I used to be able to dbl. clk.

Before I got my I phone 5, a friend showed me this iPhone help for my phone when it started acting off, or slow.
I would dbl. clk. & all these apps would appear at the bottom of the screen and all I needed to do was click on each one
til a negative sign appeared and then clk it off. Then do it again on down the line until all the apps that appeared are gone.
At first I was skeptical, thinking I was deleting all my apps, but when I was promised by my friend that it was a help to my
phones functioning better, I did it, and voila, it worked!!! All my apps were still there, and the funky things my phone had been
doing prior, was all gone!!!!!
My question now, is I don't know how to do the same thing on my Iphone 5, because first, if I dbl. clk, I get Siri, so I gave up
trying to do that trick, but occasionally, the apps along the bottom, will show up like on my previous phone, but, they won't let
me clk them off!!!! I try to keep a hold the app as long as should be necessary, but the minus sign for deleting it, never comes
so I just give up. I have tried to move them too, but nothing. Does anyone else do this, and know how to apply it to their iPhone
5? If nobody knows this particular boot up for their phone, does anyone have any other tricky & easy re-boot or clean up tricks
for the iPhone 5 you can share?? I would be very grateful, because I don't know why, I always seem to have troube with my devices,
but even when this was new, I'd get occasional problems with it, like letters sticking or not wanting to work,,, or the typing becoming
Real Slow,,,, or I swear this is true, using my Siri to text for me, and after a few paragraphs I'd check the message for words to be right,
( because sometimes Siri prints obscure words,) but how about this, you go to check your letter, and it's ALL in SPANISH !!!!! ????
Yes that's right, and not just once,,,
It sometimes shuts off or leaves the website I was on right when I was in the middle of something, of course important,,,, someone told
me that because I had ALL these problems with my Mac Book that is 4-5 years old, and the poor thing has had to have me,,, a computer
a computer illiterate, for all these years,,,, ( I do try,, as much as I can,) they said that my Mac that has been acting sick since the first week
I bought it, my other devices--( my iPad & phones,) were doomed to get sick as soon as I synced them to my sick Mac. I've always wondered
If this was true,,, so I'd appreciate any feed back on that too, even tho I can't afford a new one so you can save any toss it jokes, LOL .
Sorry for the length of this, thank you to all who read it, and especially those with advice,,,,
Most grateful, sngbrd7

If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

Am I alone w/ Right Clk not bringing context menu w/ 8.2RC/PcWin for brush adjustment pin

am I alone w/ Right Clk not bringing context menu w/ 8.2RC/PcWin for brush adjustment pin ?

solved, it was my mouse setup... false alarm

My contacts are organized in different groups. An iPhone trade show app (Vinexpo) displays exhibitors infos and allows to create new contacts. Is there any way to save a new contact in a specified group instead of the contacts root? Thks in advance

My contacts on my iPhone are organized in different groups. I have downloaded a trade show app which gives infos on the exhibitors of the show. It offers to create new contacts from these info. Is there any way to save these new contacts in a specified group instead of putting them into the contacts root, where they are mixed with all the old ones? By the way, can we create a new contacts group directly from the IPhone, without having to go through the sync process with the PC?
Thanks a lot in advance

Sorry, I forgot to bookmark the thread where the app was mentioned, but searching for "group" or "contacts" should bring a few results in the AppStore.

I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

The top screenshot is the Windows Open dialog box. All File > Open... commands in all Windows programs bring it up. Try File > Open in Notepad for example.
It belongs to Windows not Adobe. You cannot change this because there is no such thing as an Adobe Open dialog box.
The bottom screenshot is Windows Explorer. It is Windows' OS File Browser, not an Open dialog. It is not called up by Photoshop or any Windows program.
You have to click on "My Computer" or a Folder icon to get to it. You can double-click a psd, jpeg or other image file in the Explorer window so that it opens in Photoshop.
There is Adobe Bridge and Minibridge Alt + Ctrl + O or File > Browse in Bridge

When i open firefox and it brings me to my homepage, the page adress isnt in the adress bar.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/852676]]</blockquote>
EX: my homepage is Youtube.com and when i open firefox, it brings me to youtube but the adress bar says, "Go to a website", instead of the link of the page im on. it is VERY annoying and i really need the link because i actually do use it a lot!

You just need to update the setting under the Startup to not restore your previous session. Go to Tools - > Options - > General Tab. At the top it says 'When Firefox starts:' with a dropdown. Just select Show my homepage.

Can you open a report in Excel/Word desktop instead of the web pugin?

using run_report_object( and web.show_document,
how or can you get a report to open in the desktop/full version of MS Excel/Word instead of the web plugin versions?
I can get the browser to open a report in pdf with my desktop adobe reader, but not with an rtf or xml/delimited desformat.
Currently I don't pass a mimetype when opening as a pdf, but I do pass one in the url when i am destypes of xml, delimited and rtf,
as this is the only way i have found out how to open the reports in word/excel.
I'm in the process of upgrading from forms 6 client/server to 10g developer suite, so this is my try with a web based system.
Does anyone have any suggestions, or where I should look.
Below I listed my code from a procedure.
the first part of the procedure is alot of converting, but if you skip down to the part between the 2 sets of double lines this fairly standard.
PACKAGE BODY pmc_lib IS
-- Procedure to run the report.
procedure run_reports(v_report_name in varchar2, -- Report Name with or w/o a path.
v_commode in number default synchronous, -- commode
v_execmode in number default runtime, -- execute mode
v_file_sys in number default filesystem, -- dummy
v_param_list in paramlist, -- parameter list
v_show_modes in varchar2 default null) is -- used for testing,
-- if set to anthing but null, the report properties will display
-- on the screen through an alert prior to printing.
v_errorcode number;
v_errortext varchar2(600);
v_initialized boolean := false;
v_prop_reportserver varchar2(200);
v_report_path varchar2(200);
v_user varchar2(100);
v_user_sessionid number;
v_forms_version varchar2(100);
v_default_report_server varchar2(200);
v_default_server_domain_path varchar2(200);
v_connect_string varchar2(3) := get_application_property(connect_string);
v_user_name varchar2(35) := get_application_property(username);
report_id report_object;
reportserverjob varchar2(100);
v_jobid varchar2(100);
rep_status varchar2(100);
v_url varchar2(500);
v_url2 varchar2(500);
v_parameter_value varchar2(100);
v_destype_param_value varchar2(100) := null;
v_desformat_param_value varchar2(100) := null;
v_desname_param_value varchar2(100) := null;
v_value_n number := 0;
v_param_type number := text_parameter;
v_prop_execmode number;
v_prop_commode number;
v_prop_destype number;
v_prop_filename varchar2(200);
v_prop_source_block varchar2(200) := null;
v_prop_query_name varchar2(200) := null;
v_prop_desname varchar2(200) := null;
v_prop_desformat varchar2(200) := null;
v_prop_reportserver varchar2(200) := null;
v_prop_other varchar2(200) := null;
v_mimetype varchar2(200) := null;
v_selected_mimetype varchar2(200) := null;
report_not_generated exception;
report_id_not_found exception;
BEGIN
v_forms_version := get_application_property(version);
v_prop_reportserver := get_report_object_property('report1', report_server);
v_report_path := null;
v_user := v_user_name || '/' ||
get_application_property(password) || '@' ||
v_connect_string;
if v_connect_string = 'NNN' then
v_default_server_domain_path := 'pmcoracapp01.aapmc.com/reports/rwservlet';
v_default_report_server := 'rep_pmcoracapp01_frhome1';
else
v_default_server_domain_path := 'oradevsrv.aapmc.com/reports/rwservlet';
v_default_report_server := 'rep_oradevsrv_frhome1';
end if;
v_initialized := true;
-- Check to see what version of forms is running.
if substr(v_forms_version, 1, 1) <> '6' then
-- Check to see if WEB version is running
-- This may be an unnecessary check.
if (get_application_property(user_interface) = 'WEB') then
report_id := find_report_object('report1');
-- id_null won't work on a report_id in Version 6, may put back in 10g once version 6 is gone completly
-- if id_null(report_id) then
-- raise report_id_not_found;
-- end if;
-- Because of Convertions from old system the following are needed.
-- 1) If 'execmode' is runtime, then change it to batch.
if v_execmode = runtime then
     v_prop_execmode := batch;
else
     v_prop_execmode := v_execmode;
end if;
-- 2) If Report name has an attached path, then remove it.
v_value_n := instr(lower(v_report_name), 'k:\pmc\new\');
if v_value_n = 0 then
     v_prop_filename := v_report_name;
else
     v_prop_filename := substr(v_report_name, v_value_n + 11);
end if;
-- From looking at the FORMS, 'destype' parameter is always passed in from the FORM.
-- It is either 'preview' or 'file'.
-- This is here for the converstion from Forms 6 to 10g.
-- If for some reason destype has not been passed in as a parameter, you will get a FORM error,
-- saying the parameter does not exists.
begin
-- 3) If 'destype' is one of the following, then change it to cache.
get_parameter_attr(v_param_list, 'destype', v_param_type, v_destype_param_value);
if lower(nvl(v_destype_param_value, 'null')) in ('preview', 'file', 'null') then
v_prop_destype := cache;
-- 3a) If 'destype' was = 'file' then check the 'desformat' and 'desname'.
if lower(nvl(v_destype_param_value, 'null')) = 'file' then
-- 3b) Get 'desformat' value
get_parameter_attr(v_param_list, 'desformat', v_param_type, v_desformat_param_value);
-- 'delimited' was not working, so change all 'delimited' to 'delimiteddata'.
if lower(nvl(v_desformat_param_value, 'null')) = 'delimited' then
     v_desformat_param_value := 'delimiteddata';
end if;
-- 3c) If 'desformat' is NOT one of the following, then change it to pdf.
if lower(nvl(v_desformat_param_value, 'null')) not in ('pdf', 'xml', 'rtf', 'delimiteddata') then
v_prop_desformat := 'pdf';
else
v_prop_desformat := lower(v_desformat_param_value);
end if;
-- 4) Get 'desname' property.
get_parameter_attr(v_param_list, 'desname', v_param_type, v_desname_param_value);
v_prop_desname := lower(v_desname_param_value);
end if;
else
v_prop_destype := lower(v_destype_param_value);
end if;
exception
when others then
null;
end;
-- If a desformat is rtf, xml, or delimited then get a mimetype to pass to the url
if lower(v_prop_desformat) = 'rtf' then
v_mimetype := '&mimetype=application/msword';
elsif lower(v_prop_desformat) = 'xml' then
v_mimetype := '&mimetype=application/vnd.ms-excel';
elsif lower(v_prop_desformat) = 'delimiteddata' then
v_mimetype := '&mimetype=application/vnd.ms-excel';
end if;
-- 6) If the Following are not set within the Report Object then
-- set them to the following defaults.
-- These are al required to be set for the Report Object to Function.
-- These are the defaults for AAPMC.
v_prop_execmode := nvl(v_prop_execmode, batch);
v_prop_commode := nvl(v_prop_commode, synchronous);
v_prop_destype := nvl(v_prop_destype, cache);
v_prop_desformat := nvl(v_prop_desformat, 'pdf');
v_prop_reportserver := nvl(v_prop_reportserver, v_default_report_server);
-- Set All Report_Object Properties
set_report_object_property(report_id, report_execution_mode, v_prop_execmode);
set_report_object_property(report_id, report_comm_mode, v_commode);
set_report_object_property(report_id, report_destype, v_prop_destype);
set_report_object_property(report_id, report_filename, v_prop_filename);
set_report_object_property(report_id, report_source_block, v_prop_source_block);
set_report_object_property(report_id, report_query_name, v_prop_query_name);
set_report_object_property(report_id, report_desname, v_prop_desname);
set_report_object_property(report_id, report_desformat, v_prop_desformat);
set_report_object_property(report_id, report_server, v_prop_reportserver);
set_report_object_property(report_id, report_other, v_prop_other);
-- Run Report_Object
reportserverjob := run_report_object(report_id, v_param_list);
v_jobid := substr(reportserverjob, length(v_prop_reportserver) + 2, length(reportserverjob));
-- If Report Status is not 'FINISHED', then loop till it is.
if reportserverjob is not null then
rep_status := report_object_status(reportserverjob);
while rep_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
rep_status := report_object_status(reportserverjob);
end loop;
if rep_status <> 'FINISHED' then
raise report_not_generated;
end if;
-- Create 1st part of url.
v_url := 'http://' || v_default_server_domain_path || '/getjobid' || v_jobid || '?server=' || v_prop_reportserver;
-- Check for mimetype.
if v_mimetype is not null then
v_url := v_url || v_mimetype;
end if;
-- Final part of url.
v_url2 := 'javascript:window.open("' || v_url || '", "", "fullscreen=no, titlebar=no, location=no, toolbar=no, menubar=no, status=no, resizable=yes"); self.close()';
-- This is the built-in that calls a new browser window
web.show_document(v_url2,'_blank');
else
raise report_not_generated;
end if;
end if;
-- Destroy the parameter list.
destroy_parameter_list(v_param_list);
else
-- This section if for Client Server, Version 6 of forms.
-- It will do the same as before the conversion.
-- It is only used before the complete conversion.
if v_report_name is null then
return;
end if;
v_value_n := instr(v_report_name, 'k:\pmc\new\');
if v_value_n = 0 then
     v_prop_filename := 'k:\pmc\new\' || v_report_name;
else
v_prop_filename := v_report_name;
end if;
run_product(reports,
v_prop_filename,
v_commode,
v_execmode,
filesystem,
v_param_list,
null);
end if;
-- create history record of the report being run
insert into pmc_report_history values(
s_pmc_report_history.nextval,
v_prop_filename,
v_user_name,
sysdate,
v_forms_version,
v_jobid,
v_destype_param_value,
v_desformat_param_value,
v_desname_param_value,
v_prop_destype,
v_prop_desformat,
v_prop_desname,
v_mimetype,
v_window_open_params);
commit;
exception
when report_id_not_found then
show_user_alert('ERROR: Cannot Find Report Object!', null);
when report_not_generated then
show_user_alert('ERROR: Report Not Generated!', null);
when others then
v_errorcode := SQLCODE;
v_errortext := SQLERRM;
show_user_alert('ERROR : ' || v_errorcode || ' = ' || v_errortext, null);
end;
end;

What you could try is downloading the report to the client pc using WEBUTIL_FILETRANSFER.URL_TO_CLIENT, then open the locally save file using something like:
CLIENT_HOST('cmd /c rundll32.exe url.dll,FileProtocolHandler "localfilename"');

IPhoto show a exclamation mark instead of the picture

Hi all folks,
iPhoto 8.1.2 (iLife '09) show an exclamation mark only, instead of the picture. The thumbnail overview shows the picture and in the edit mode I got the picture too. All the time I open the picture with Preview, I got the picture, but iPhoto can't. In general I have no problems with iPhoto, all pictures are shown.
My question, does someone know where the exclamtion mark (a black exclamation mark in a white circle) came from.
Thanks for any help,
Lutz

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can you get your submit buttons to be a single click instead of the default double click? (The

How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).

Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

How do I show the anchor text instead of the link in a pdf?

I'm using Adobe Acrobat 7 to create a PDF.
I'm creating hyperlinks inside the PDF that link to Web links.
When the reader hovers over the text I want the anchor text to pop-up
instead of the Web link. How is this done?
For example:
If someone hovers their mouse over the text "click here for info" and
the link is "http://www.hyperlinkforinfo..com"
...I want "click here for info" to pop-up instead of "http://www.hyperlinkforinfo..com"
Thanks!

As you can observe by a look-see at Acrobat's Link Tool dialog, there is no facility for adding a "tool tip" or an alternate text description.
Nor can such be provided upfront in an authoring file and migrated into the output PDF.
While a properly developed Tagged PDF supports providing Alternate Text description for the <Link> element this is focused to AT applications.
Typically, entered Alt Text for the <Link> element will not "display" on screen ala "tool tip" idea.
Keep in mind that the feature set associated with a PDF link annotation is not at all the same as what is associated with HTML elements.
PDF (ISO 3200-1) and HTML (any flavor or 'recommendation') are rather different creatures.
Be well...

I can not view emojis correctly on my brand new iPhone 6 and happens no matter what generation phone and my txt are freen when I send them to someone instead of the normal color. Plz helpu

I can not view emojis correctly on my brand new iPhone 6 and happens no matter what generation phone and my txt are freen when I send them to someone instead of the normal color. Plz helpu

Hey John,
If you are having an issue with emojis on your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting emoji issues - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

Does this happen with each bookmark?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

When i type in my adress bar "facebook" it takes me to a google search instead of the site like it normaly would.

Normally when i type in lone site words like google, facebook, pandora, yahoo, and other such sites it automatically redirects me to the site without me having to type www and .com
but as of today it has started to direct me to a google search page of facebook, in particular, instead of the site.
Why might this be?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ General ▹ New tabs open with: Empty Page

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Dbl clk .pkg brings up PackageMaker instead of the installer

Similar Messages

Maybe you are looking for