Dblink errors from 11gr2 to 8.1.7

Hi,
I created a DB link on 11gr2 to connect with old version 8.1.7. there is ORA-03113: end-of-file on communication channel. I've checked with other related threads and make sure my creation with right global_name setting and password case. I understand the intermediate lower version of database could resolve this basically.
Does anyone know if there is a patch on either side could resolve this issue? Thanks.

Hi,
In the metalink the Doc ID: 207303.1 says Not compatible. Use a 9i Database as an intermediary
Use Heterogeneous Services and the ODBC Gateway to configure a database link between the two databases. That will require installing the ODBC gateway on a machine that has a sufficiently old version of the Oracle client and configuring an ODBC connection to the "Oracle 8" database.
see this post
Oracle 11g database link to Oracle 8

Similar Messages

ORA-02068: following severe error from dblink

Dear friends,
My database (oracle 9.2.0.8.0) will call another database's (oracle 9i cluster) view through DB Link to get some data.
If we are to access the data for the first time in a particular session, it gives the output within a second.
But if we access the data after 45mins in the same session(already connection is open), the query is running for 9 mins it throws an oracle error.
There is no network issue also(solaris 5.8 server).
select * from <synonym> where <column_name>=<Value>;
synonym is created in my database for remote database view (schema_name.view_name@dblink_name)
please find the Oracle error below:
ORA-02068: following severe error from RAMBOMAX
ORA-03113: end-of-file on communication channel
SID EVENT STATE WAIT_TIME SECONDS_IN_WAIT P1 P2 P3 SQL_HASH_VALUE
547 SQL*Net message to client WAITED KNOWN TIME -1 0 1413697536 1 0 951575186
283 SQL*Net message from dbli WAITING 0 441 675562835 1 0 3503340408
298 SQL*Net message from dbli WAITING 0 199 675562835 1 0 3503340408
572 SQL*Net message from dbli WAITING 0 485 675562835 1 0 3503340408
632 SQL*Net message from dbli WAITING 0 358 675562835 1 0 3503340408
634 SQL*Net message from dbli WAITING 0 250 675562835 1 0 3503340408
581 SQL*Net message from dbli WAITING 0 208 675562835 1 0 3503340408
561 SQL*Net message from dbli WAITING 0 376 675562835 1 0 3503340408
520 SQL*Net message from dbli WAITING 0 413 675562835 1 0 3503340408
What could be the reason for this? could some one please help me on this?
Thanks,
Prathap

user8724104 wrote:
Dear friends,
What could be the reason for this? could some one please help me on this?
Thanks,
PrathapHi Prathap,
you should focus your research for solution on [ORA-03113|http://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-03113+link&objID=f61&dateRange=all&userID=&numResults=15]

ORA-02068: following severe error from - How to handle the overgiven Except

Hello again ^^,
hope its okay to write the follwnig question into a new Thread...
I sometimes get errors from remote dbs.
ORA-02068: following severe error from DBLINK
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-02068: following severe error from DBLINK
ORA-03113: end-of-file on communication channelThese are in one sqlerm. Is it possible to handle the second errors without string operations?
Thanks and regards
Edited by: user10283133 on 28.10.2008 08:33
Try to force the headline

The remote db is accessible from 6 am to 6 pm. When querring longer than given time span I get the Error ORA-02068. In the sqlerm for this Error is a second Errormessage from an second different Error concatenated.
Now I will tell what I think is happening:
I think the remote db say: >>I will go sleep now<< an throws Error A (ORA-01089 (or ORA-03113, or what else)). This Error A goes to the local db. The local db get the Error A and throw a new Error (Error B = ORA-02068). This Error B is independet from Error A. And I see a String which is "Error B + Error A"
I recieve also three possible Errormessages:
ORA-02068: following severe error from DBLINK
ORA-03113: end-of-file on communication channel
ORA-02068: following severe error from DBLINK_ODS_STBY
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-02068: following severe error from DBLINK_ODS_STBY
ORA-whatelse: what elseI can handle the ORA-02068. But my questions is, can I handle the second Error (thus Error A) without string operations?
The Relase is 10g2. Please tell me which information you still need ...
Thank you very much.
regrads

DB Link Error from Oracle to Mysql

Hi ,
I have created the dblink from oralce to mysql using note id 1320645.1
I am getting the below error while connecting to the mysql using the dblink
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][MySQL][ODBC 5.1 Driver]Access denied for user 'user'@'xxxx.xxxx.xxxx'
(using password: YES) {HY000,NativeErr = 1045}
ORA-02063: preceding 2 lines from MYODBC5
Please help me to slove the error
Thanks in Advance
Sudheer

Sudheer,
the error message is self explaining - your user 'user' connecting from the host @'xxxx.xxxx.xxxx' is not allowed to log into the MySQL database. To solve this issue you need to grant permissions to the user so that he can connect from any host (%) or just from that particular host where you installed the gateway.
The command to allow access from everywhere would be:
grant all on *.* TO '<user>'@'%' IDENTIFIED BY '<password>';
or just specify the IP address instead of '%' if you want to restrict it.
More details can be found in the MySQL manual:
MySQL :: MySQL 5.1 Reference Manual :: 6.2.7 Causes of Access-Denied Errors
- Klaus

DBLink error in procedure

Hi,
Please help me to solve this DBLink error in procedure.
Created a below DBLink and it is working fine all sql statements in sql plus.
DBLink created statement
CREATE DATABASE LINK "OFFICE2"
CONNECT TO "SALES" IDENTIFIED BY "SALES"
USING 'TNSOFFICE2';
SELECT TRANSACTIONID
FROM RECEIPT_DETAIL@OFFICE2
INSERT INTO RECEIPT_DETAIL@OFFICE2
(TRANSACTIONID)
VALUES
(665035);
While I am using this same statements in procedure, I am getting a error
'ORA-00942 table or view does not exist' in dblink used statements and procedure is not compiling.
Please help me to solve this problem
CREATE OR REPLACE
PROCEDURE TEST_PROC1 AS
L_REC_NO NUMBER(10);
CURSOR C1 IS
SELECT TRANSACTIONID
FROM RECEIPT_DETAIL@OFFICE2
BEGIN
OPEN C1;
FETCH C1 INTO L_REC_NO;
CLOSE C1;
INSERT INTO RECEIPT_DETAIL@OFFICE2
(TRANSACTIONID)
VALUES
(665035);
END TEST_PROC1;
Thanks & Regards,
Jen.

Jen. wrote:
Created a below DBLink and it is working fine all sql statements in sql plus.Who owns this database link? (name of the schema)
While I am using this same statements in procedure, I am getting a error
'ORA-00942 table or view does not exist' in dblink used statements and procedure is not compiling.Who owns this stored procedure?
CURSOR C1 IS
SELECT TRANSACTIONID
FROM RECEIPT_DETAIL@OFFICE2
BEGIN
OPEN C1;
FETCH C1 INTO L_REC_NO;
CLOSE C1;Why? The following is a lot less code, easier to read and more maintainable.
L_REC_NO NUMBER(10);
begin
select transationid into l_rec_no from from receipt_detail@office2;
end;No need for an explicit cursor.
Also why are you using a L_ prefix for variables? And why underscores? This is an extremely silly standard that fails to understand the impact of Hungarian-like notation, how to correctly manage scope resolution, and using camelcase for variables (a standard in most modern programming languages).
The very worse place you can look at for programming standards is PL/SQL code from Oracle (as they have no consistent set standard as proved by the packages supplied by them, and often resort to COBOL-like standards of the 80's - which has no place in the 21st century software engineering)

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

As soon as I login with iChat, I get an error from MobileMe!

Hey, I've had this issue for a while, and my work around for it was just not using iChat. However, I want to use iChat now so I need a proper resolution. Now I have mobile me with my [email protected] address, and I have my iChat account with [email protected] (created before my MM subscription).
When I log into iChat for the first time, within minutes I get an error from MobileMe saying "You've entered an incorrect password for MobileMe, please try again"... I didn't do anything though.
If I go to MobileMe in System Preferences, it says: "Your password has changed. Enter your new password.
If you have not changed (or reset) your password contact MobileMe support."
If I enter my password in and get that fixed, the next time I start up iChat it says: "Your login ID or password is incorrect"... soo I'm confused.
The password for my @me and @mac addresses are different, is it possible they are sharing the same keychain? I do have the check box ticked to remember the password.
Any idea's?

Hi,
I would not repair at this time.
In the list of password you should find the one for iChat Or possibly several for iChat if you have different Account/Screen Names list by their Account names.
Double click on the one that is causing you issue.
In the new window that pops up put a tick in the Password Box. You will probably have to confirm with your Admin Password to Allow Once.
Does this show the right password ?
If not change the Password.
If it does then click the Access Tab and see if iChat is Allowed (Or Allow All is being used)
Either change to Allow All or add iChat to the List.
7:45 PM Saturday; April 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

How to remove error from propagation and verify replication is ok?

Have a one-way schema level streams setup and the target DB is 3-node RAC (named PDAMLPR1). I run a large insert at source DB (35million rows). After committing on source, I made a failure test on the target DB by shutting down the entire database. The streams seems stopped as the heartbeat table sequence (it inserts a row each min) on target is still reflecting last night. We get the error in the dba_propagation:
ORA-02068: following severe error from PDAMLPR1
ORA-01033: ORACLE initialization or shutdown in progress
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7639
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
08-FEB-10
while capture, propagation, and apply are all in enabled status. I restarted capture and propagation at source DB. But still see the error message above. My questions are:
1. How to delete the error from dba_propagation?
2. How to verify the streams is still running fine?
In normal test, during such large insert, the heartbeat table added a row in an hour. Very slow.
thanks for advice.

Well, if I can give you my point of view: I think that 35 millions LCR is totally unreasonnable. Did you really post a huge insert of 35 millions then committed that single utterly huge transaction? Don't be surprised it's going to work very very hard for a while!
With a default setup, Oracle recommends to commit every 1000 LCR (row change).
There are ways to tune Streams for large transaction but I have not done so personnaly. Look on Metalink, you will find information about that (mostly documents id 335516.1, 365648.1 and 730036.1).
One more thing: you mentionned about a failure test. Your target database is RAC. Did you read about queue ownership? queue_to_queue propagation? You might have an issue related to that.
How did you setup your environment? Did you give enough streams_pool_size? You can watch V$STREAMS_POOL_ADVICE to check what Oracle think is good for your workload.
If you want to skip the transaction, you can remove the table rule or use the IGNORETRANSACTION apply parameter.
Hope it helps
Regards,

Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr

Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nuno

http://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price &lt
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null.

Need Help in expdp for resolving ORA-39127: unexpected error from call

Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
Shan

Hi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC

Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol

We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?

Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Dblink errors from 11gr2 to 8.1.7

Similar Messages

Maybe you are looking for