DBM (Dealer Business Management) Business Content

Hi,
is there any DBM (Dealer Business Management) Business Content in SAP BI?
Thanks,
Daniel

Hi,
This link may help you,
http://help.sap.com/saphelp_nw70/helpdata/en/6b/6a344516ca409488714d5b3af18dcf/frameset.htm
Veerendra.

Similar Messages

Unicode ERP and non-unicode Dealer Business Management 5.00(DBM)

Hi All,
We are going to adapt SAP Dealer Business Management 5.00(DBM)industry-specific solution to our local(serbian)language.For this we need following install steps:
1.ERP ECC 5.0
2.DIMP ECC 5.0
3.DBM 5.0
Is it possible to proceeds on sach way because we have Unicode ERP ECC 5.0, but on other hand DBM 5.0 is non-unicod?
In case it is possible, please give me some ideas on it.
Thanks in advance
Predrag

Hi Predrag,
How is DBM installed? In the same system as an add-on or a separate system? If it's an add-on, then they would have to have the same codepage. If it's in a separate system, then there are some possible data loss "issues" when the sending system is Unicode and the receiving system is non-Unicode. If the sending system sends a character that is not on the recieving system's codepage, the data is "garbage". There are no such problems with Unicode->Unicode and non-Unicode->Unicode communication.
Best Regards,
Matt

Training/Education about SAP Dealer Business Management(DSM) ?

Hi,
Anyone knows, is there any training/education about SAP Dealer Business Management(DSM) ? If there is, in which countries ?
Thanks.
Best regards,
Behcet Ahmet Aksoz

Hi Behçet,
For which release do you search training?
We in SAP Education have clasroom training IAU290 for DBM7.0 (however no fix scheduled dates are avaiable now, but only on customer request).
Additionally we have an online learning map (Online Knowledge Document - ODBM70).
Please find the courses on the curriculum map
The DBM 8.0 is in Ramp Up and special workshop is available for customers who are taking part in the Ramp Up process.

Business content for Investment Management & Travel management

Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
Anil

Hello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike

Standard Business Content - Loan Management & Term Deposit

Hi ALL,
I would like to does anyone has used Business Content Cubes on Loan Management & Term Deposit and its report, please advise me which cube appropriate
Thanks
BR
Nathan

Hi,
In RSA1, in BI contents, search for the InfoARea 'Bank Analyzer - 0BA_BA'. Under this InfoArea, you will find the objects used for loan management. I am not sure about Term Deposit.
Regards,
Yogesh

BI 7 Service Management Business Content

Hi Fellows: I've never worked with Service Management. I was asked to put together all the names of Standard Business content Infocubes and Queries. I was told by one of the R/3 consultant that I would find those cubes and Queries under QM since the data was to come from Plant Maintenance. Is that right? He listed the following cubes for me to look into
Notifications: 0QM_C10
Notifications - Activities: 0QM_C07
Notification - Tasks: 0QM_C08
Notifications - Items: 0QM__C09
Notifications - Causes: 0QM_C06
Service Orders - OCS_C02
Service Orders - Operations: OCS_C03
Service Orders: Costs and Allocation: 0CS_C01
Simulated Maintenance Costs: 0PM_C05
Budget Data for Plant Maintenance (Transactional): 0PM_C06
Plant Maintenance Budget Data (MultiProvider): 0PM_MC01
Any help would be greatly appreciated and points rendered for sure. Thanks
B

Ravi (or anyone else who can answer this in case Ravi is busy): thanks again for answering the questions. I right clicked the infocube 0QM_C10 in the 'BI Content' section and selected 'Display Description'. I then get the detailed metadata of the infocube. Perfect so far. I then click on the link that says 'Network display of the data flow', where I get the detailed data flow and its wonderful. The only issue is that the DataSources listed in the diagram are not listed as the datasources for the Customer Service DataSources in help.sap.com. Any reason for that?
Does that mean I need to activate all the datasources and infoobject for QM and Customer Service under Production Planning?
Hope I didn't confuse you. Thanks again.
P.S. for Sayed: if you get a little white blank screen then just maximize it and wait for a short while. Also see if you can scroll up or down. The diagram might be hidden.

Business Content in SAP BI 7 for SAP xApp Emission Management

Dear Collegues,
I am unable to find standard Business Content in SAP BI for SAP xApp Emission Management in help.sap.com Can anyone help me to find this along with Standard Reports and Cubes for SAP xApp Emission Management in SAP BI 7.
Thank you very much.
Regards,
Suman Raju.

Hi,
Please check the SAP help for Industry solution BI Content. You can access (3.5 Help) through below links:
Bank Analyser
http://help.sap.com/saphelp_nw04/helpdata/en/3d/13b7a4675e51479e158591ef49ebfb/frameset.htm
SEM Banking
http://help.sap.com/saphelp_nw04/helpdata/en/01/fc453caff4f703e10000000a114084/frameset.htm
Transaction Banking
http://help.sap.com/saphelp_nw04/helpdata/en/96/073acb4deca54fbf55ce3fddef3092/frameset.htm
Loan Management
http://help.sap.com/saphelp_nw04/helpdata/en/27/8a461622e4164bb5702f8c5ffd920f/frameset.htm
Collateral Management
http://help.sap.com/saphelp_nw04/helpdata/en/41/4fe61ffbfa3014e10000000a114e5d/frameset.htm
Regards,
Kams

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Business Content for Business Process Management (BPM)

Hi,
Can anyone point me in the direction for documents describing the Business Content (or SAP delivered) construction/development of BPM?
Thanks!

Hi Audrey,
You can have a look at these:
(Development of the BMP)
Cross-Component Business Process Management (CCBPM) with XI 3.0
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap netweaver rig webinar - cross-component business process management with xi 3.0.pdf
SAP XI 3.0 SP1 - Tutorial Defining a Business Process
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap xi 3.0 sp1 - tutorial defining a business process.pdf
these below you can find at:
http://service.sap.com/nw04
SAP NetWeaver in Detail -
Process Integration -
SAP Exchange Infrastructure -
Media Library -
Miscellaneous
SAP XI 3.0 - Cross-Component BPM (Virtual Classroom)
https://websmp101.sap-ag.de/~sapdownload/011000358700005239612003E/V00512_Volmering_221003.vcm
SAP XI 3.0 - BPM Click-through 1 (SAP Tutor)
https://websmp101.sap-ag.de/~sapdownload/011000358700005237162003E/ccBPM_Lev1_MergeSplit.sim
SAP XI 3.0 - BPM Click-Through 2 (SAP Tutor)
https://websmp101.sap-ag.de/~sapdownload/011000358700005239282003E/ccBPM_MergeSplit.sim
Regards,
Michal

Standard Business Content & Data Targets for Case Management & CRM Survey

Dear Friends,
We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
1. Case Management
2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
Please guide.
Regards,
Rajesh Banka

hi,
You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Deepti

Business Content for SAP BW ,WAM work order ans asset management

Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
Srini

Thanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag

Business Content Cube for Service Management

My organization relies very heavily upon service orders and, as such, would like to create implement a SM (service management) cube.
We don't have CRM. Does anyone know of any business content SM cubes? I can't seem to find any.
Many Thanks!

Hello,
Please go through the LO Extraction datasouorces of Customer Service BW ( 2LIS_18_* ).
This will be definately helpful.
Regards,
Prafulla

Business Content for Record Management System

Hi all,
Does anybody know if there is any available Business Content in the last release of BW, (SAP NW 2004s Add on 3)?
As far as I know, in prior releases , there isn´t any available BC to extract information from a RMS.
I know there are some BAPIs to reach the content in RMS and I wonder if we can use these to extract the information from RMS to BW.
Has anybody ever faced this kind of BW project?
Thanks in advance.

Hi,
I'm just facing the same problem, and I got the same conclusion that you: RMS Business Content is not available, and no news about its availability on future releases.
It would be nice to post something here if someone gets a way of extracting data (that BAPIs don't sound like an easy job).
Have a look:
Records Management Business Content
Regards,
David.

Enterprise Compensatio Management Business Content

Hi,
In my current project, we are going to implement the Enterprise Compensation Managemet business content. Reviewing the different structures available for the reporting, I saw most of the reports have been created on ODS objects or Infosets. I'm concerned about it, from a performance point of view, so it's not possible to optimize them through the use of aggregates (I know the ODS objects can be optimized using secondary indexes, but this cause problems when loading the data). I would like to know the reason why SAP has configured the model this way: if it's a very new business content, and it hasn't been developed completely by SAP, or if there's a good reason for it that I'm missing. One option for us is to create custom cubes, but in this case, we should replicate all the reporting.
Has somebody experience in implementing this module, or has been in a similar situation?
Thanks in advance for your help

Hi David,
At the moment there is no standard business content for SAP Records Management. There is for case management (via SAP CRM objects) but not for SAP RM.
It maybe difficult to build such content because every documentclass (of a record or document) creates it's own tables for storing the metadata and other data (about 16 tables).
Also as mentioned the structure of the record is an XML document so not easy extractable from a table.
Regards,
Tjalling-Jan

Inventory Management (0IC_C03) Business Content queries

I have the following queries which are delivered when I activate 0IC_C03. The queries below have also been activated as part of the model.
Is there any additional queries which should/can be activated against this InfoProvider and of the list below are any redundant? Thanks
Blocked Stock
Consignment Stock at Customer
Inventory Turnover
Quantities of Valuated Project Stock (as of 3.1 Content)
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)
Receipt and Issue Customer Consignment Stock
Receipt and Issue of Blocked Stock
Receipt and Issue Quality Inspection Stock
Receipt and Issue Stock in Transit
Receipt and Issue Vendor Consignment Stock
Scrap
Stock in Quality Inspection
Stock in Transit
Stock Overview
Stock Overview (as of 3.1 Content)
Stock Range of Coverage
Valuated Stock
Valuated Stock (as of 3.1 Content)
Vendor Consignment Stock

hi Niten,
by choosing that 0IC_C03 and using grouping 'in dataflow afterward' in business content activation, you should get all the queries.
you can cross check in rsa1->metadata repository->local object (business content).
in sap help
http://help.sap.com/saphelp_nw2004s/helpdata/en/77/65073c52619459e10000000a114084/frameset.htm
(expand left node)
hope this helps.

DBM (Dealer Business Management) Business Content

Similar Messages

Maybe you are looking for