DBM Notification Vehicle Information is not retrieved

Hi DBM Gurus,
I have tried to create a Notification from Vehicle Master (T-code: /DBM/VSEARCH). However, the vehicle information as well as the customer number is not retrieved to the Notification.
Please advice if I have left out any configuration.
Appreciate quick response from all the gurus here.
Thank you.

HI Makarand,
please check the function module /DBM/CU16_GET_QMEL.
check with a breakpoint that the field GS_VIQMEL-/DBM/VHGUID is filled with the vehicle guid.
Later this is used for example on the reference objects screen via FM
FUNCTION /dbm/cu17_ue_sapmiwo0_009.
Best regards
Robert

Similar Messages

Outlook 2013 Free/Busy can not retrieve information

Currently have a problem with Outlook 2013 Free/Busy can not retrieve information.
All windows updates are installed.
Exchange 2007 is being used.
Problem started last week.
Already Tried without any progress:
1) Recreated profile (Fixed the issue for 1 week)
2) Cleanfreebusy ( No longer works for outlook 2013)
3) /Cleanreminders
4) Removed latest updates for outlook 10/02( As requested by Microsoft support, however we found users without this update installed, suffering from the problem)
5) Repaired OST file
6) Repaired Office 2013
Can anyone help it would be much appreciated?

Hi
As per the information and details provided by you, Outlook 2013 free/busy cannot retrieve information, please follow these steps: -
The user has never logged in
Before any free/busy information is available, the user must have at least a calendar. A calendar will not be created until a user logs into their account.
The option to publish at some location has been enabled in Calendar options
In all Outlook versions, the option to publish free/busy information must be unchecked. By default, this option is already unchecked.
This option is located under
Tools > Options > Preferences > Calendar Options > Free/busy Options.
Outlook is using cached browser information
Outlook Free/busy user HTTP, and therefore borrows information cached by Internet Explorer. It is required to clear the offline cache. This is located under
Tools > Internet Options > General. In the “Temporary Internet Files” section, choose the
“ Delete files” button.
Internet Explorer settings is not correct
AN Internet Explorer setting may prevent the .ics file from downloading via HTTPS. In Internet Exporer on the Outlook computer, go to
Tools > Internet Options > Advanced. In the Security section, the checkbox for “Do not save encrypted pages to disk” should be unchecked.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Problems with PPTP VPN server authentication - Could not retrieve key agent account information

Errr so far switching to a mac based server has been a mess. I have had it with permission issues!!
Here is my latest problem. After rebuilding the server several times my VPN clients can't connect. Every other time it has been fine but for some reason its just not working. I did recreate the vpn from a back up. I am not sure if that has anything to do with it. Anyway below is the error I am getting. Anyone have any idea what is causing it? You have all already been so helpful. Thank you very much!
DSAuth plugin: Could not retrieve key agent account information.
DSAuth plugin: MPPE key required, but its retrieval failed.
CHAP peer authentication failed for joel

Thank you for your help John. Before I could even employ your suggestion the server crashed. I don't understand why I am constantly dealing with these issues. I cloned the install to a new HDD and then did a reinstall. That fixed VPN, so far so good. But talk to me next week, something else will happen I'm sure.

Sorry,could not retrieve your device information p...

every time I try to sign in to www.ovi.com on my pc,when I go to notes or calendar it saysorry,could not retrieve your device information please try again.this issue has been happening in the past 15 days.I cant delete notes or contacts and I cant manage my device and I cant sync my device with ovi.any suggestions?
my blog on the net(in arabic):http://bazkurd.wordpress.com

All recent posts discuss this Ovi store under maintenance upgrade .
jje

INST-07294 could not retrieve SSO information in OFM11g FRD installation

Hi!
I have an error while trying to install forms,reports 11g:
INST-07294: Could not retrieve SSO information with the given credentials.
Verify the credentials. Make sure that hostname, port and password are correct
ldapbind cn=orcladmin to OID 11g successfull.
SSO rcu executed after ofm rcu.
What I should to check?
Thanks

Hi, Rodolfo!
Thansk for replay!
"The installer needed for the 10g SSO part is available in the same 11g download page" - I think you are wrong.
On the page that you are mentioned there are only schema creation assistant - SSO Metadata Repository Creation Assistant (10.1.4.3.0)
But here http://download.oracle.com/docs/cd/E12839_01/install.1111/e12003/claqi.htm they say that I need SSO installed:
Install Oracle Single Sign-On 10g (10.1.4.3) on your system in a different Oracle Home location than your Oracle Internet Directory installation.
Why SSO is mandatory and not optional?
So, if I quite right, to get a Portal/Forms/Reports/Discoverer 11g I have to do the following:
1.install db11g
2.install sso mrca
3.run sso mrca with load option
4.run rcu for creating ofm11g schemas
5.install OID11g
6.run sso mrca with register option in OID
7.install Identity Management 10g only with SSO and DAS services from here http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
8.and only then run pfrd installation
Am I right?

Outlook 2013 with Office365 exchange Scheduling assistant not retrieving free/busy information

Hi, we are using Outlook 2013 with Office365 Exchange and when using the Scheduling assistant in Outlook users are seeing "No Information. No free/busy information could be retrieved". The scheduling assistant works fine in OWA.
I have spent time trying to find an answer on the web but most answers involve different exchange variations.
Mark

Hi,
Since the problem only exists on Outlook Client, we can try running Outlook with the switch "/cleanfreebusy", this will clear and regenerate free/busy information:
outlook.exe /cleanfreebusyin the blank box, then press Enter.
You can also switch between Online and Cached Mode to check if there's a difference.
Regards,
Melon Chen
TechNet Community Support

Pearl 9100 will not retrieve MMS

My Pearl 9100 will not, and has not since I have owned it, retrieve MMS. I get a notification that someone has sent me a message, my phone displays the message and says ***Not Retrieved Yet*** with a button underneath saying "Download Now" and "Expires mm/dd/yy/time". But after I click "Download Now", my phone does absolutely nothing. I have no idea what to do or where to start to even try to remedy this situation. My carrier is Bell Canada.
Any help would be appreciated, thanks!

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Could not retrieve Enterprise Global Template - Load balancer issue

Hi,
We have 4 Project Server 2010 servers. The 4 web servers are load balanced by networking team with sticky session configured.
When we try to connect to the Project Server using MPP 2007 SP2, it fails saying 'Could not retrieve Enterprise Global template'. It works perfect when we point to a specific server by specifying the IP address for server name in the 'hosts'
file.
Earlier we observed some errors in the event viewer related to the SharePoint's internal load balancer for which restarted the 'Project Server Application' on each web server and it got fixed.
Now, the only entries that we see related to load balancer are as mentioned below as Information (not errors).
SharePoint Web Services Round Robin Service Load Balancer Event: Initialization
Process Name: w3wp
Process ID: 15080
AppDomain Name: /LM/W3SVC/539065287/ROOT-1-130462463500778047
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:ae7c7ee5c09b4e8198bdbb1ecb8c1c1b#authority=urn:uuid:9f626d347784423eb14bde4a1f4d13fc&authority=https://lonms12546:32844/Topology/topology.svc
Active Endpoints: 4
Failed Endpoints:0
Endpoint List:
http://lonxxx2532:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2545:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2546:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2566:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
Could the issue be due to network load balancer?
Could the issue be due to Sticky session configuration on the load balancer.?
How can we get to the root cause of the issue?
Which logging category should we set to 'Verbose' that can give us some hint.
Update: We tried to capture the requests through fiddler and observed that when fiddler is running on the client computer then the connection works perfectly fine even through the load balancer. Probably fiddler is reformatting the SOAP
envelop of the web service requests the way it should before sending the request to the server.
If we do not run fiddler and run some other similar tool (like Charles) then it again gives the issue and the request stucks at /PWA/_vti_bin/psi/winproj.asmx
We ran Wireshark on the servers and found the following for that web service call:
[TCP Previous segment not captured] Continuation or non-HTTP traffic.
Please let me know if someone could provide any hint what can be done next.
Regards, Amit Gupta

There are several ways to configure your load balancer. I would suggest that you work with the network engineer, the load balancer vendor and your project administrator to resolve this issue.
Basically you need URL to be resolved correctly. Also, I don't believe PS2007 did a good job handling load balancing, so you may need to bring someone in good with IIS and see they can tweek IIS to manage the cache better.
As I go back and look at your analysis, I think you should probably look at upgrading to Project Server 2013. They made some improvement in load balancing and the management of distributive cache.
I assume you have 4 WFE because you have thousands of project users. Roughly how many you have? Over 1000, over 5000
Have you tried to see if using two load balancing work? How about just one front end. I often see companies scaling SharePoint and Project server to extremes.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Problem with CDN - Could not retrieve the cdn enpoints in subscription with id...

I tried to set-up a CDN endpoint over a storage account last night and kept getting 404. suspecting that this is just time to propagate I called it a day.
This morning when I went to look again - my CDN endpoint was not visible in the portal and instead I get the warning.
I tried to set-up a new endpoint and that fails too, now I have two warnings -
Could not retrieve the CDN endpoints in subscription with ID '34280cfc-814c-4d35-8836-0ec2b7ce68e7'.
Could not retrieve the CDN endpoints in subscription with ID '440d3de7-23fd-424f-8961-a57f6f6384ed'.
Any thoughts?
Yossi Dahan - http://yossidahan.wordpress.com - [To help others please mark replies as answers if you found them helpful]

Hi,
This issue is reported at Azure Status:
https://azure.microsoft.com/en-us/status/#history below is the detailed information, the incident has now been mitigated.
7/30
CDN - Multi-Region - Partial Service Interruption
This incident has now been mitigated. From 30 July, 2014, at 06:00 to 18:28 UTC, engineers received reports of an issue in which CDN customers might experience issues while creating new CDN connections and accessing their existing content. Error messages
indicated "Warnings occurred while loading the management data for this resource type" and "Could not retrieve the CDN endpoints in subscription with ID". Preliminary investigations indicate that this incident was caused by a misconfiguration of Network endpoint
connecting to the service, and engineers implemented a configuration change to mitigate impact.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HELP! Premiere pro could not retrieve the 'my documents' folder location?!

Hi
I just installed Creative Cloud and downloaded Premiere CS6.
When I start it, I get two dialogue boxes saying the same thing...
"adobe premiere pro could not retrieve the 'my documents' folder location. The application will make use of a temporary folder for this session..."
When I then go to export to Media Encoder, it crashes repeatedly.
I am unable to find the My Documents folder on my system - it's a new system and must have been set up strangely.
Can someone please help here as I am unable to run my video editing business when I can't export files!
Thanks
Geoff

As far as I know "My Documents" is a Windows thing... giving more information when asking a question is a good thing... Information FAQ http://forums.adobe.com/message/4200840
If you are on Windows, search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for help on creating that folder

Consumption data in vehicle information icon of vehicles-technology tab

Dera Sir,
I do not find any data in the 'consumption data' window which pops up when the 'vehicle information' icon is clicked which is in the 'Vehicles-Technology' tab page of Vehicle Master Data.I have created measurement documents via IFCU.
Please guide how to see data in that window.
Thanks and Regards,
R N Sabat.

Problem solved !
Measuring position was not maintained for key figure IAMENDISTT and IAMENFLVOL in customizing:
Plant Maintenance and Customer Service > Information Systems for Plant Maintenance and Customer Service > Configure Measurement Document Update
Regards,
Saif Ali Momin

Could not retrieve a valid windows identity - access is denied

Background:
We have a reporting solution based on SQL Server 2012 SP1 running on Server 2008 R2. Users access the solution through SharePoint 2013. We have several hundred users and all is well with the exception of 2 users.
Problem:
When these 2 users try and open a SSRS report they receive an error. The entry is the SharePoint log reads:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid
windows identity for NTName='domain\username', UPN='[email protected]'.
UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied.
Other details (thoughts):
We are confident that Kerberos and C2WTS are set up and working correctly (we have a couple of hundred users working).
We suspect it may be Active Directory related but can find nothing that sets the users apart from everyone else.
Has anyone any suggestions to resolve this?

Hi Robin,
If you have a One Way Transitive Trust setup between the domain, where the Windows Services reside, and the other domain where the users reside. Then please refer to the link below and set two-way trusts:
http://blogs.msdn.com/b/psssql/archive/2012/08/20/sharepoint-adventures-reporting-services-claims-and-one-way-trusts.aspx
If not, then some users could access Excel Services while others could not, the issue might be caused by credentials. Please refer to the link below:
http://blogs.msdn.com/b/rodneyviana/archive/2011/07/19/troubleshooting-claims-to-windows-nt-token-service-c2wts-in-sharepoint-2010-may-be-difficult-if-you-don-t-know-where-to-start.aspx
Please try narrowing down the issue and test if only internal machine works. More information about the error message:
http://blogs.msdn.com/b/andrasg/archive/2010/05/04/setting-up-sharepoint-2010-excel-services-to-get-external-data.aspx
Regards,
Rebecca Tu
TechNet Community Support

Since 7.1.2 mail does NOT retrieve mail in background and notify

After updating to ios 7.1.2 and having to do a complete reset and restore from backup, mail does NOT retrieve mail and notify me that a new message has arrived.
In the past (and with every version of the OS until 7.1.2) mail would vibrate when a new message arrived - I did not have to open the mail app and wait for the download.
What is the fix? In the past, mail was not in notification center - I don't want to see a badge or other on screen listing of the message that has arrived, only have the phone vibrate when a new message arrives.
Thanks.

Of course - have an open case with Apple support as well. Co-workers are receiving notifications, IOW, when mail is received their phone will buzz (if in silent or vibrate mode) or ding or similar.
I have to actually open the mail app and only then will it grab email and 'notify' me it's been received.
And yes, configuration is set to push - meaning the e-mail server will push it out to the clients immediately,

Imaq avi get info do not retrieve any info

Hi everyone,
I have some trouble with the vision VI IMAQ AVI get info,
everything was working well then I don't know what happened but the VI does not retrieve any information on any files, and I get the following error:
Error -1074395993 occurred at IMAQ AVI Open
Possible reason(s):
IMAQ Vision: File I/O error.
I need the framerate, Width, height and number of frame from this VI or else I cannot develop my application.
it only returns 0 on all values but the number of frames which is not correct 4294967295
I am thinking I might have broken the vision library.
Thanks for your help.

Sorry for the multiple message,
I have found why it did not work it was not the imaq get file info but the IMAQ AVI Open VI that does not like the path string given by the open/Create/Replace File VI.
If you have any idea why it would be appreciated.
Thanks.
Attachments:
Open Avi.vi ‏22 KB

Log shipping Could not retrieve backup settings for primary ID

hello,
I implemented log shipping in our server the process of implementation went fine but when I view job history I found
Message
2014-06-11 12:00:01.53   *** Error: Could not retrieve backup settings for primary ID '99817903-626e-4380-bcf1-c09ca6f48b6d'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   ----- END OF TRANSACTION LOG BACKUP   -----
Exit Status: 1 (Error)
also I check for database ID using select * from msdb..log_shipping_primary_databases
your help is appreciated.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Thank you all for your contribution.
After testing and debugging I found that when they move their database from one server (server2) to another server (server1) the database still using the old name (server2) which you can findusing this script:
SELECT @@SERVERNAME
so the replication can't retrieve information, unfortunately for me it is difficult to rename the server because it sis development server so they need to make analysis about side effects if we renamed it.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

DBM Notification Vehicle Information is not retrieved

Similar Messages

Maybe you are looking for