DBMGui Information about old non existent databases

If I start DBMGui and connect to a database server there are listet a lot of database entries.
Some of them are not existent any more at the moment.
TR3     7.5.00.32   /sapdb/TR3/db
SR3    7.6.00.28   /sapdb/SR3/db
TST    7.6.00.36    /sapdb/TST/db
PR3    7.6.00.36   /sapdb/PR3/db
Where are this information from? Which file?
Thanks
Andreas

What Jens ...?
Well if on your sever you get a lot of non-existent instances when doing
dbmcli db_enum
then it's quite likely that the instances had been dropped in a "unclean" way.
What can you do to get rid of these entries? It depends.
So the easiest way to get this done (if you're a SAP-Customer) would be: open a support message.
If you're not an SAP customer you might want to give us some further information here.
Therefore please post the results of the following commands on the server:
dbmcli db_enum
dbmcli inst_enum
xinstinfo
KR Lars

Similar Messages

My Apple-id want me login with an old non existent e-mailadress

I´ve used the sam Apple-id for many years and I have changed the primary e-mailadress twice since the beginning and the original adress doesn't exist any more. Logging in to my iCloud using my apple-id isn't any problem on my iPhone, iPad or my Mcbook. But yesterday I started up my iMac after a long time not using it and I upgraded the os to Yosemite. Now it wants me to log in to iCloud using my old non-existent emailadress. And when I try, it says something like "You can't log in because your account has been inactivated by security reasons." And then it suggests me to reset the password at http://iforgt.apple.com.
To reset your password you have to recieve an email on how to reset the password. But since the email-adress doesn't exist any more thats not an option. It then suggests me to answer my security question and first you have to enter your birthdate but when I do that Apple says it doesn't match with the birthdata I've entered 10 years ago.
So, how do I solve the problem?
/Fredrik Meuller

You need to give Apple Support a call - only they will be able to help you and activate the account again. See this webpage on how to contact Apple Support in your country: There are either telephone numbers given or an email form:
Contact Apple for help with Apple ID account security - Apple Support
Explain, that you need help with an account security problem.

Adobe ID has old non-existent email, stuck as can't verify.

I screwed up. Installing CS 5.5 on second mac, and didn't update my email address before installing, so the verification email went to a non-existent address. The "We have sent an email to (old address)..." page blocks any attempt to access my ID to update it. Going to "chat" with Adobe seems to get no response; waited 18 hours for a representative who will get to me shortly. I created a new Adobe ID with the updated address in order to access this forum. Any advice would be much appreciated.

Prayjam you will need to contact our support team directly to resolve the Adobe ID issues you are facing. If you are not being given an option to contact our support team at Contact Customer Care then please utilize a different web browser.

Parental Controls showing old, non-existing apps

When I went to refresh the applications that my young son can use, the list of "Other" is showing applications that no longer exist on our Mac. How can I get this list to refresh?
Thanks,
Tony

hmm, you can try rebuilding launch services database. that works for getting rid of old applications in the open with" menu. maybe that will clear that parental controls list too.
open terminal (it's in /Applications/Utilities) and run the following command (copy and paste please):
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user

Can't get help or information about a non-warranty repair. Desperate in Dap

I purchased a zen micro photo on 4/3/06. The very next day, to my horror, I dropped it on a hard floor. Popped right out of the ****ed soft pouch. My old zen micro has been dropped before but I guess that hard case they used to supply did it the power of good! The micro photo is kaput. It powers up but stays on the creative screen and makes a whirring sound for a little while. I have tried the recovery options and none of them work - just hang.
Since Monday 6th of March, I have been trying to get someone at Creative to tell me how I can get this repaired, how much it will cost etc. I had the same problem as the last guy with a shocking phone line to Singapore. Couldn't hear the menu options, chose one that hung up on me. Chose the other and couldn't talk to the operator because of the huge lag. We were just speaking over each other. I have now made a couple more phone calls and tried, in vain I think, to read out my long e-mail address to various operators. My job is to deal with people from other countries so it's not as if I can't understand a singaporean accent - it's just that the phone line is so unbelievably bad. As well as the phone calls, I have sent 3 e-mails. I waited a week each time and have as yet received no response.
I even sent a fax to the Creative Labs in Sydney and it was, of course, ignored. When talking to the person who answers the phone there, I have tried to stress to them that I need the help of someone in Australia (to perhaps get someone in Singapore to address this) but they have not been the least bit interested in helping me.
I'm posting here as a last ditch effort to attract some advice!

Your problem might be that the arm that reads the hard disc is stuck because you dropped it and knocked it out of place and thats why it freezes on the Creative Screen. My player also froze on the Creative screen, but it you give your player a good hard shake while gripped tightly in your hand, also banged against stuff will dislodge the stuck harddri've arm and get it back into place and then your player should say "Rebuilding Library".
I found out this solution on these forums, so try it, it might work.

Trying to make a DVD with an old/non-existent version of iDVD!

Ladies and Gentlemen,
Please could you help me?
I work at a school in the UK, and have recently been able to purchase an external Lacie DVD drive, as the school’s computer (currently an iBook G4 with OSX 10.3.2 and a 1GHZ Power PC Processor – 640 MB Memory and a 40 GB HD) wasn’t shipped with one – however, I have a problem…
Trying to make a DVD that will play in a stand-alone DVD player – I followed the advice in iMovie Help – but was stopped suddenly on finding that I do not have the relevant version of iDVD (which version (if any – I can’t see it anywhere!) was shipped with iMovie 4.0?). Is it possible to download a copy of iDVD 3 or later from anywhere compatible with OSX 10.3.2 and iMovie 4.0?
The iMovie Help has an additional option to ‘export your movie in a format appropriate for DVD authoring’ which has let me burn the movie as a (name).DV file – but this is not compatible with any DVD player I have tried. I noticed a while ago on this forum that someone was talking about Toast but I do not have this, but I do have Roxio Easy Media Creator 7, which was bundled with the burner – but is only compatible with a PC – would I be able to build a project in iMovie, transfer it to a PC, and use REMC7 to do what toast would?
Finally, I was wondering if anyone has any experience of using Avid’s free DV software – and if they would recommend it (and also if I would be able to make DVDs with it?).
Well thanks for reading if you got this far – and I’d appreciate it if you could offer any advice (I know I’ve not been very concise)…
Kevin.
iBook G4 Mac OS X (10.3.2)

Thanks for the welcome Karsten! I’ve checked the installer disks – which appear to have all the main pieces of software, but not iDVD. If you or anyone knows where it might be hidden that would be great. Thanks for all the other info too!
Thanks Lennart – I don’t think my computer could support iLife ’05 as it is running Mac OSX 10.3.2 and I’ve just been looking at its system requirements which state it requires 10.3.4 minimum – if you know differently, please let me know. As an alternative I have considered getting iLife ’04, but your comment about iLife ’05 being the first version to support external drives worried me (“iDVD 5 is the first iDVD version that officially supports external burners“ does this mean there is an unofficial option for iLife ‘04? Perhaps a patch similar to the one mentioned by Karsten), does that mean iLife ’04 would not support an external Lacie DVD writer?
What is the earliest version of Toast I’d be able to use (as a money saving option!)?
Thank you both, and apoligies for my amateurish questions…
Kevin.

Contextual Open With Menu shows old non-existent Applications

Open With Menu: Shows multiple applications. It even shows versions of older applications that are no longer on my hard drive. And if I select these older version, those older applications launch! I've checked the About... menu selection on these older versions, and sure enough it says the older version. Example: I only have the latest version of Opera 9.24 on my drive, but 3 older versions, plus 4 of one of them show. I can click each one and they ALL launch with separate windows for each one.
http://docs.info.apple.com/article.html?artnum=305627
I followed the instructions to trash <com.apple.LaunchServices.plist> file and Restarted and the menu STILL lists all the applications. I then checked the Prefs folder again, and the <com.apple.LaunchServices.plist> hadn't even recreated itself yet.
I'm totally stummped

I just realized that in my previous post I neglected to mention, that the problem has quickly returned. Sorry for any confusion.
Now after two tries, I notice that some .gif files have Preview icons others Photoshop. Some .gif files are listed to open with Preview, others with PS.
If I use Cmd + i on a wrong iconed file and scroll down to any other app, select it, let the icon change, then without doing anything else, scrolling back up to the default (Preview), the icon finally changes correctly. Change All is now available, but clicking it has no effect on any other files that have the PS icon. Some don't even change over from PS being the default app to Preview.
Same problem with .txt files. Some TextEdit, others Excel. So.. I am just changing them one by one, whenever I need to open one that is wrong.
At least the multiple apps in the Open With pulldown are gone
I'd sure like to know:
1) Why are my Library files corrupting and
2) Why is Dr. Smoke's fix creating icon problems
3) Out of the 1,000s of threads, I wonder what the possibility of the good Doctor ever finding this on and helping us/me find a total solution. Help us Dr. Smoke, we need youuuuuuuuuuuuuuu...

Evolution Calendar displays old, non-existing events from Google Calen

I attached a screen shot of evolution calendar for an easy explanation of the issue. Most of the events on that day are repeated events which ended very long ago (i.e.they are not in the Google calendar for that particular day). Does anybody know how to tell Evolution not to show those already-ended events?
Thanks.

Found the bug report, here it is in Gnome Bugzilla:
https://bugzilla.gnome.org/show_bug.cgi?id=710683

[SOLVED] Grub crash: seeking non-existent device

A couple days ago, I did a successful fresh install on another computer. Today, I took my hdd from my old system and added it as a slave on IDE1. I didn't move or make any changes to /dev/sda (arch hdd) and BIOS successfully recognized the second hdd.
Then when I boot, Grub complains:
error: no such device: [some UUID]
grub rescue>
At this point, I'm assuming it must by the UUID of my first hdd and for some reason, it can't find it anymore.
I should mention here that when I partitioned /dev/sda during installation, I used GPT, not MFT. Since this computer is an older Dell that I'm resurrecting with Arch, it has an older BIOS, which means that gdisk had to create a very small bios-boot partition to make it somehow compatible with the BIOS. I mention it because I'm not sure if that plays into any of this.
Next, I boot the arch-install iso "ARCH_201310" off my keydrive, then blkid to see the UUIDs of both hard drives...nothing matches the UUID that grub complains about. Then I go into gdisk and check all the UUIDs for disks, partitions...find nothing that matches. I check my grub.cfg and it's not in there either. Just out of curiosity, I regenerated my grub config and reinstalled grub (after arch-chroot, of course) and then rebooted. Got the exact same message! I'm totally at a loss now. I have no idea what's going on. I'm hoping the forum can help...so I don't have to go through the hassle of doing a fresh install all over again. If it makes any difference...here's some output from the grub shell...I tried ls everything listed, but it couldn't find any filesystems.
grub rescue> ls
grub rescue> (hd0) (hd0,msdos4) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) (hd1) (hd2) (hd2,msdos2) (fd0)
Not even sure why it listed (fd0) since I removed the floppy drive and turned it off in BIOS
Last edited by bpont (2013-10-26 07:31:23)

So just for the sake of completeness, in case anyone in the future has a similar issue and stumbles across this thread:
The reason grub was giving an error about a non-existent device with a UUID which didn't belong to any of my current devices or partitions was because it had belonged to a previous installation on the same drive...one whose /boot was on the primary hdd of my previous computer. I think I may have also mistakenly installed grub on the second hdd at that time, instead of on the primary one...so long story short, there were some artefacts on the MBR of the second hdd which grub was finding and complaining about.
There were two possible solutions to resolving the boot failure: chrooting to my arch partition and re-installing grub, first on the second hdd, and then on the primary hdd; or the second option of removing the 55AA signature on the second hdd with a hex editor. After choosing the simpler option of reinstalling grub on both hard drives, I then switched my second hdd back on in BIOS and rebooted normally.
Last edited by bpont (2013-10-26 06:44:24)

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Non existent ID

My Apple ID no longer exists although I don't remember deleting it - why would I anyway?? However whenever an App Store update appears for downloading to myIPOD Touch, it asks for the password to this now non-existent ID. Consequently I can't download any updates. I've created a new ID - is there any way I can link this new ID to my IPOD so that this appears instead of the "old" non existent ID?

If you aren't getting the emails (you've checked the spam folder as well as the inbox ?) then you could try contacting iTunes Support and see if they could help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

OEM discovery - shows non-existing DBs

Hello All:
When i try to discover a node/host , OEM discovers non-existing databases as partially configured. These databases have been deleted a while ago. How do we clear them? oratab doesn't have entries for these databases.
Thanks
S~

There arent any refs in listner.ora of those deleted dbs. I changed the tns_admin from $ORACLE_HOME/network/admin to $ORACLE_BASE/admin/SID/tns_admin as i am using a wallet. This may have probably introduced the confusion.
Thanks
S~

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) HELP!

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) and requires the password to do anything. Everytime I go onto the ICloud page it shows my old email and requires the password, but I can't exactly type in a password because that won't work. I can't find a way to change my email or delete ICloud.

If the old ID is an earlier version of your current ID, do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

DBMGui Information about old non existent databases

Similar Messages

Maybe you are looking for