DBMS_SCHEDULER doesnt works after database Upgrade

After upgrading database from 10.2.0.4 to 10.2.0.5 version jobs runing fails.
I have recreated and all jobs, but the result is same.
Last start date shows that some jobs (4 of 10) start to run in a different time than planned. Another 6 jobs doesnt start.
planned 17.09.14 06:30:00,000000 +06:00
fact 17.09.14 11:51:05,715511 +06:00
What to do?

select job_name, enabled, a.JOB_TYPE, a.JOB_ACTION, a.start_date, a.last_start_date, a.LAST_RUN_DURATION, a.next_run_date
from DBA_SCHEDULER_JOBS a
order by 2
1
LOCK_STAFF_VAC
TRUE
PLSQL_BLOCK
BEGIN krn_adm.lock_vacation; END;
17.09.14 06:00:00,000000 +06:00
18.09.14 03:55:33,301720 +06:00
+000000000 00:00:04
18.09.14 06:00:00,300000 +06:00

Similar Messages

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Mysqld doesnt work after an upgrade

after a recent upgrade mysqld has stopped working on my server, its been fine for a year (and as a result has allot of important data in the mysql databases).
when i attempt a restart of the service it just fails, the tail of /var/lib/mysql/whitefall.err is:
090809 17:30:14 InnoDB: Started; log sequence number 0 1621468
090809 17:30:14 [ERROR] /usr/sbin/mysqld: Error writing file '/var/lib/mysql//whitefall.pid' (Errcode: 28)
090809 17:30:14 [ERROR] Can't start server: can't create PID file: No space left on device
090809 17:30:14 mysqld_safe Number of processes running now: 0
090809 17:30:14 mysqld_safe mysqld restarted
090809 17:30:14 [Note] Plugin 'FEDERATED' is disabled.
090809 17:30:14 [Note] Plugin 'ndbcluster' is disabled.
/usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist
090809 17:30:14 [ERROR] Can't op090809 17:30:14 mysqld_safe Number of processes running now: 0
090809 17:30:14 mysqld_safe mysqld restarted
i dont know much about the workings of the mysql service, its rather urgent that this gets fixed.
would rolling back to an earlier version work> and if so how do i go about doing that?

Hello Arcath!
"090809 17:30:14 [ERROR] Can't start server: can't create PID file: No space left on device" <= Is there any free space really ?

Lenovo Yoga 2 Pro: WiFi doesnt work after driver upgrade

After experiencing Wireless issues I tried to upgrade my Lenovo Yoga 2 Pro 13" with Windows 8.1 64Bit to the latest drivers from the lenovo support site.
Ever since I cannot connect to the WLAN anymore. What puzzles me is that the driver status in the device manager shows a different driver version than what I have installed (uninstalling the driver and reinstalling it doesn't change anything here).
What puzzles me is the Lenovo Website shows driver version 16.6.0.8 (released 25.Jan.2014, see link below), whereas my system display version is 16.6.2.1 (dated 31.10.2013). Hence I thought I have another version from somewhere else on my and removed all driver versions I could find.
Checking driver details I get the follow file versions:
   C:\windows\system32\drivers\NETwbw02.sys    version 16.6.2.1 Intel, dated 2011
   C:\windows\system32\drivers\Netwfw02.dat       no version or publisher
   C:\windows\system32\drivers\vwifibus.sys          version 6.3.9600.16384 Microsoft
Still, whenever I deinstall the driver, install the files from lenovo and click "Detect new device" my system pulls the drivers as listed above and is incapable of connecting to any WiFi.
Windows 8.1. shows no connections available and doesn't connect anymore.
How can I get my WLAN back?
regards
   Florian
Lenovo Driver URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS039994
Solved!
Go to Solution.

hi Florian,
If Windows Update is configured to automatically fetch updates from Microsoft then the machine most likely have installed the Intel driver update for Intel(R) Wireless N-7260 as discussed in this article (which explains the different driver versions).
Things that you can try:
1. If the machine comes with the Intel(R) Wireless N-7260, navigate to:
- Device Manager
- Network Adapters
- Intel(R) Wireless N-7260 (right click > update driver software)
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer (you will then see a list of drivers, check if you have the version 16.6.0.8 from Lenovo and choose it and observe.
2. Restart the machine and boot into the BIOS (by pressing F2 on the Lenovo screen). Once you're in, navigate to the Configuration Tab and ensure Wireless is set to Enabled (if applicable).
- Link to picture
3. Perform a System Restore and choose a date before the issue began. (this will restore the unit to an earlier point in time where wireless connection is working fine)
4. Perform a Refresh / Reset or press the OneKey Recovery button (this will restore the unit to factory settings - ensure that you backup important files first).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Iphone 3g doesnt work after ios5 upgrade

i upgraded my iphone 4 but now i can't use facebook, get my emails...anything that uses the internet isn't working anymore!! it says 'could not activate cellular data network...'etc...please help!!
i can only use it for texts, phone calls and camera at the moment which is not why i chose iphone!

Muskelkraut wrote:
after upgrade of iOS4 on my iPhone 3G the battery perfomance decraeses dramatically.
I use the 3G-mode and bluetooth, but no location id service and no wifi, but the battery runs empty within 4 hours. As far as I know, multitasking is not available for my 3G.
with the previous OS my iPhone runs nearly 2 days with the same settings und usage.
What should I do?
Settings/General/Reset Reset Network Settings, then reboot (hold HOME and SLEEP until an Apple logo appears)
If you have an Exchange email account and still have the problem do the following:
Settings/Mail,Contacts,Calendar, tap on the Exchange account and delete it. Reboot. Go back to Settings and add it back.
There are other possibilities, including misbehaving applications, but this is a common problem with Exchange.

On/off button doesnt work after firmware upgrade on micro

hi,
two days ago i found out about the new firmware update for the micro zen (..0) i realized it would get me better mileage out of my battery so i updated it. i also sent it to my friends that i convinced to get the zen cause it was so much better than the ipod. i updated mine zen and realized right away that the on/off switch was acting very very weird. it would sometime take two or three tries to get it on or off. after a day or two it stopped working altogether. i updated the firmware again but that didnt do anything. my friends didnt have any problems with it. i cant even get into recovery mode cause the only way to turn it on is to plug it in the charger/computer. the only way to turn it off is to unplug the battery. my computer does recognize it when i plug it in cause i was even able to backup all my songs. can someone please help me?

You get to recovery mode by removing the battery, so on/off is not necessary.
It might well be the switch has failed, and therefore you need to contact Creative Support, links for which are in the FAQ post.

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SugarCRM stops working after Leopard upgrade

My local copy of SugarCRM CE 4.5.1 was working in Tiger before I upgraded to Leopard last week.
After the upgrade, SugarCRM complains with the following message:
=====
Warning: mysqli_connect() \[function.mysqli-connect\]: (HY000/2005): Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1) in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 419
Warning: mysqli_close() expects parameter 1 to be mysqli, boolean given in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 444
Could not connect to server localhost:/tmp/mysql.sock as root.Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1)
=====
A copy of PHPMyAdmin has not had any problems during the transition from Tiger to Leopard, nor have local copies of WordPress and Drupal.
Any advice would be appreciated. I'm new to the subtleties of Apache/PHP/MySQL on Leopard, so please be gentle.
Thanks.

Thanks for the swift response.
I'm familiar with the socket location issues with MySQL on Mac OS X. My local copies of WordPress and PHPMyAdmin both work with their configurations pointing to the socket at /tmp/mysql.sock. These installations were working, along with SugarCRM, before the Leopard upgrade. Only SugarCRM has stopped working after the upgrade.
Is there something I misunderstand about your pointer?
- O.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

Several apps don't work after I upgraded OS today

A few of my apps no longer work after the upgrade. They just give a blank screen. Who should I be reporting this issue to?
Thanks

Ty TenNights. Also, opened an email through bridge (gmail) with attachments (jpg files) and tapped them to download. They downloaded and it says tap to open. I tap and my pictures folder opens up, but the jpg's aren't there. Now I can't see the files

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

Left mouse button does not work after last upgrade on one computer.

Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

DBMS_SCHEDULER doesnt works after database Upgrade

Similar Messages

Maybe you are looking for